trend, said system restore disabled

Similar Questions

• type it the password of the account, it says the user profile service Service failed the profile logon.user cannot be loaded.on from the system restore, it said: System Restore could not start. What should I do? __

  type it the password of the account, it says the user profile service Service failed the profile logon.user cannot be loaded.on from the system restore, it said: System Restore could not start. What should I do?

  Have a look here:
  http://support.Microsoft.com/kb/947215
  or here:
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

• System restore disabled by Trojan

  While surfing on a Trojan horse was detected by Mcafee, then my XP system restore was unable to access previous restore points (visible, but is not accessible). The restore points from the event being created as usual - I can access previous restore points to cancel the download (E8 also redirects some research to other sites) usenetwork seems to be the first restore point system also deleating usenetwork disabled wireless network?

  McAfee has dealing with the Trojan horse, or he just warn you of his presence? You will need to take care of that first.

  For SR to run, start your PC and press F8 to get the start menu and select "Safe Mode with command prompt." Once the command prompt window appears, type %systemroot%\system32\restore\rstrui.exe, and press ENTER. The interface of the system restore will rise, allowing you to choose a date. You can have more success using this method.

  SC Tom
  -There is no such thing as TMI if you request technical support.

• My family in Windows XP system restore is disabled by group policy. The system cannot me to enalbe this function, despite I have a partition of my hard drive to store all backup

  When I open the System Properties dialog box, System Restore is checked, saying: she is disabled by group policy, and the system you cannot activate this option. I got a partition dedicated to my justo of hard disk to store backups and create Points of restoration with a capacity of 10 GB. How can I solve this problem?

  If you see things like this:

  You do not have sufficient security privileges to restore your system.
  The System Restore tab is missing from the my computer properties.
  System Restore has been disabled by group policy.  To turn on system restore, contact your domain administrator.
  The System Restore tab is available, but the turn off System Restore (disabled by Group Policy) box is grayed out.
  The task manager has been disabled by your system administrator.
  The registry editor has been disabled by your system administrator.
  The task manager has been disabled by group policy.
  The registry editor has been disabled by group policy.
  The command prompt has been disabled by your administrator.  Press a key to continue...
  The operation has been cancelled due to restrictions in effect on this computer.  Please contact your system administrator.
  The "Run" option is missing from the start menu.
  The option "Log off."... ' is missing from the Start Menu.

  The usual advice are something in the sense of "something has been disabled in the group policy...". ", and it is probably true that something has been disabled, but you know what something is and what it takes to do about it.

  If you are using XP Home Edition, you will get away with advice to use the Group Policy Editor, because there is no Group Policy Editor in XP Home and that really doesn't tell you where to look in group policy, even if you run the Group Policy Editor.

  You need a complete solution that works for all versions of XP and requires no hunting around in the Group Policy Editor or registry to find where things are that have been disabled.

  Unless you have disabled these things on purpose, chances are good that your system has a malware infection.  The malware knows what tools you use to try to find and remove, for the malware disables the things you are more likely to consume and prevents them from running if you can't find the malware and remove it.

  If your system has this kind of affliction, all malicious software tools you currently use or have used failed to protect your system so that you can expand your horizons malware detection and prevention to prevent these kinds of afflictions in the first place.

  The malware will be happy you trick into thinking that you need to so something drastic to fix your system - as a facility repair, system restore point or a total reinstallation of XP.  This is what it would be like you, but these measures are not necessary.

  You must solve the immediate problem of the tools does not, then scan your system for malware when you are finished.

  No matter what kind of malware you've used analytical tools, they are unlikely to solve this problem, because they cannot tell if the changes made to your system have been on purpose (you or an administrator who makes them) or some malware changed them, so the analysis tools will let these things alone (it's usually a good thing).

  If your system is afflicted in this way, there are probably other things that also do not work - like the Task Manager, the registry, System Restore and command prompt Editor, so fix them all at once even if you have not discovered they are broken again.

  These commands from registry removes the registry entries that are stop opening programs.  Although the registry entries do not exist, these commands are safe to run and will work for all versions of XP.

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  Open Notepad to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines of text into the new Notepad file.

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableRegistryTools" = -.
  [HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System]
  "DisableCMD" = -.
  [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]
  "DisableTaskMgr" = -.
  [HKEY_USERS\.default\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
  "DisableCAD" = DWORD: 00000000
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableConfig" = -.
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableSR" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoSetTaskbar" = -.

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:

  enableit.reg

  After you save the file, close Notepad.

  Locate the file enableit.reg on your desktop and double-click it.

  Alternatively, you can right-click on the enableit.reg file, choose open with... and select the registry editor.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  Reboot your system and test.

  You can delete the enableit.reg file when you are finished.

  If the registry editor has also been disabled, we first fix (not a problem).

  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

  For the benefit of Microsoft technical support engineers, here are some ideas offered in the past which does NOT help with this issue:

  Safe Mode boot
  Last good known Configuration startup
  A clean boot
  Sfc/scannow in running (or trying to run)

• Desktop appears again without any data. System restore fails to «incomplete system restore»

  Original title: System Restore failed

  My computer turns off on its own yesterday. After the reboot, my office was back to default settings. Everything that I had stored on the desktop disappeared and I also lost all my favorite places. I tried restoring the system using different dates but it said system restore incomplete. I've lost everything?

  Hi mike,.

  ·         Have you received any messages when the computer starts very well?

  ·         Your data is also missing?

  ·         Do you have any other user accounts on the system?

  Step 1: Try to start in last good known Configuration and see if you can start very well.

  How to start your computer by using last good known Windows XP Configuration

  Step 2: Start the computer in safe mode and check the number. Report of the results.

  See also:

  Abnormal termination can affect the system restore

• Problem with SP3 - cannot uninstall or system restore

  Here's my problem. I am running Windows XP, and the longer I could not install Service Pack 3. Finally, it worked and I thought that everything was going well until I rebooted. When it restarts and relit, first thing, that it says is that my version of Intel Audio Studio does not support the Board detected, I think, only is not supported by my advice. It took a little longer to start, my microsoft security essentials do not work either nor I have my internet icon and other programs that should be in the corner, but I can always get online. Also, I can't drag files or copy and paste elsewhere, either.  The next thing I thought to do was, try to uninstall the service pack. Without success. It gives me an error "specified file is not found." So, I then decided to try a system restore. I can't do yet! He said "system restore is not protecting your computer." Restart and try again. "It's something like that happened. So, my next step was try in safe mode, no luck there either. What can I do? Help, please.

  Hi JanMur,

  Uninstall Windows XP Service Pack 3 from the Recovery Console:

  How to remove Windows XP Service Pack 3 from your computer - method 4: use Recovery Console

  If you want to re - install Windows XP Service Pack 3 then I suggest you to download the Windows XP Service Pack 3 stand-alone package and start in safe mode and install from there.

  A description of the options to start in Windows XP Mode

  DOWNLOAD - Windows XP Service Pack 3 network installation Package professional
  

• System Restore does not work in Windows Vista Basic

  I have Windows Vista Basic.  I have a few old Creative mp3 players that the computer recognized that a few days ago.  Some software must have been installed recently is interfering with the computer recognizing mp3 players.  I tried running the system restore, disable Norton Internet Security and am still getting the message system restore was not sucessfully comlete.  Your file of computer systems and settings did not change.  Details - an unspecified error occurred during system restore.  Any help would be appreciated.  Thank you.

  Bridget Ferrazzano

  Hello I have an another question - I ran sfc/scannow at the command prompt and got the message from Resource Protection Windows found corrupt files but was unable to solve some of them.  I'm still having the problem as before and would be grateful for the help.  Thank you.

  Bridget Ferrazzano

  Hi Bridget,

  If there is not a restore point for the date you want to restore, you will not be able to restore to that date. Follow these steps to repair the files that were not repairable with SFC: If the SFC tool can not repair a file

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• On the system restore running the message says "system not restored" and error 0 x 80070005 is given - how to solve this problem & get sys restore running again?

  Original title: on the restoration of the system running the message says "system not restored" and error 0x80070005 is given - how to fix & get sys restore running again?

  A ran the system restore, it goes through the entire process, then said "System Restore does not restore the" files etc, nothing has been changed.

  Error 0 x 80070005
  All + ve help would be appreciated

  Hi Rodianna,

  I know you've tried some of these steps... but try this exactly showing how. First one marked 'reply' then the following below this one.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Windows-7-system-restore-error-code-0x80070005/11c3f465-559d-4F35-B8B7-9bc010972247

  Let me know what happens.

  B Eddie

• System Restore has been disabled by your system administrator

  Problem of administrater

  Hello all, I thought that my problem was a simple one but not so much. I am logged on as administrator Windows 7 Ultimate, I went to restore my system files and is turned off by mistake, while I thought was not a problem, I knew not that it deletes the system restore all files, so here I am again to make it back on and guess what, it is said that the administrator should be informed that they are off their After trying several ways to achieve this, I resorted to no protection on my UAC, it has not helped, tried a new UAC which did not help either, so now I'm on my hands and knees hoping someone out there can help, after such a simple mistake that I was allowed to do because I was Admin , I went to not even be able to system restore back on without contact my administrator! Is any way around this, there must surely be, any help would be greatly apreciated.

  Steve.

  Hi Steve,.

  Step 1: Use the Group Policy Editor

  a. Click Start, type gpedit.msc and press ENTER

  b. go to the following branch: Computer Configuration | Administrative templates | System | System restore

  c. double click on disable the Configuration and set it to not configured.

  Note: If the above setting is already set to not configured, set it to "Enabled" and click on apply. Return back the setting to not configured, then click on apply, OK.

  d. Quit Group Policy Editor.

  If using the Group Policy Editor do not fix the problem, try the registry fix from the following.

  Step 2: Using the registry editor

  Important: The below mentioned method contains steps that tell you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

  a. Click Start, type regedit.exe and press ENTER

  b. navigate to the following key:

  HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore

  (c) in the right pane, delete the value named DisableConfig

  d. Quit Registry Editor.

  e. restart the computer and check

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Impossible to access the system restore, getting the error "system restore has been disabled by group policy.

  Recently, I was hit by a virus that, among other problems, he blocked my access to the system restore to clear it. After having had my pc repaired I can not even access the system restore or my registry. I get a message from that system restore has been disabled by group policy. It's my own pc and I am the administrator. I've tried a few things without success. I hope someone can help me with this. I have the vista operating system.

  1. click on start, run and type regedit.exe , and then press enter

  2. navigate to the following key:

  HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore

  In the right pane:

  • Delete the value DisableConfig
  • Delete the value DisableSR

  3. exit the registry editor.

  Other tips, tricks and support are available at: www.waltwachon.weebly.com

• System Restore error: "the changes to the G: drive after this point cannot be reversed, because the drive has been either excluded from monitoring system restore or has been disabled or deleted.»

  I had some problems with my computer recently I knew could be solved with the system restore.  Then I went into system restore and went to a restore point that was a few weeks back.  After I clicked on it and pressing the ok button, the following message appeared: "the changes made to the G: drive after this point cannot be reversed, because the drive has been either excluded from monitoring system restore or has been disabled or deleted.»  I let it continue and do the restore.  My computer has rebooted and came up with an error in system restore that says restore failed.  It's the same thing with other restore points.  I don't know why I get this error because I not made any changes to this hard drive except for copy of a document word on him.  I thought that the System Restore monitors removable disks.  Anyone know what is happening here and how I can get the restoration of the system to operate without the mistakes to come?

  I have Norton.  Disable the Tamper Protection works.  I also noticed that since the G: drive was a portable hard drive, System Restore wanted to exercise oversight.  He wants to monitor all hard drives.  Turn on external and portable hard disks prevents tracking system restore changes to the readers.  I don't think anyone would have the system restore review external drives anyway.  It is not necessary.

• my system restore is disabled, how do I turn it back on?

  my system restore is disabled, how do I turn it back on?

  This article should help you:

  "How to disable and enable the system restore in Windows XP"
    <>http://support.Microsoft.com/kb/310405 >

  HTH,
  JW

• "System Restore checkbox is disabled (through Group Policy)"

  Where can I ask a question ' how can I turn on system restore which is disabled by group policy?

  I turn off System Restore by using these steps. Right click on my computer-> properties-> system-> clicked restore on turn off System Restore check box.

  Using the same way, that I can not activate it because the box is disabled (through Group Policy).

  Please help me solve this problem. Thanks in advance.

  It's too bad the Answers MS deficient of remains of forums in that it does not prompt for any system information when a new question is asked, that's why we don't know anything about your system.

  If that's what you see and you do not have it to yourself, your system is currently or has been infected by malware.

  You can solve the immediate problems, but I would not use system restore to solve any problems your not specified, it (but it's up to you).

  Here are the suggestions that you might see will not work (just so you don't waste your time) and then how actually to solve this problem.

  The usual advice are something in the sense of "something has been disabled in the group policy...". ", and it is probably true that something has been disabled, but you know what something is and what it takes to do about it.

  If you are using XP Home Edition, you will get away with advice to use the Group Policy Editor, because there is no Group Policy Editor in XP Home and that really doesn't tell you where to look in group policy, even if you run the Group Policy Editor.

  You need a complete solution that works for all versions of XP and requires no hunting around in the Group Policy Editor or registry to find where things are that have been disabled.

  Unless you have disabled these things on purpose, chances are good that your system has a malware infection.  The malware knows what tools you use to try to find and remove, for the malware disables the things you are more likely to consume and prevents them from running if you can't find the malware and remove it.

  If your system has this kind of affliction, all malicious software tools you currently use or have used failed to protect your system so that you can expand your horizons malware detection and prevention to prevent these kinds of afflictions in the first place.

  The malware will be happy you trick into thinking that you need to so something drastic to fix your system - as a facility repair, system restore point or a total reinstallation of XP.  This is what it would be like you, but these measures are not necessary.

  You must solve the immediate problem of the tools does not, then scan your system for malware when you are finished.

  No matter what kind of malware you've used analytical tools, they are unlikely to solve this problem, because they cannot tell if the changes made to your system have been on purpose (you or an administrator who makes them) or some malware changed them, so the analysis tools will let these things alone (it's usually a good thing).

  If your system is afflicted in this way, there are probably other things that also do not work - like the registry editor, System Restore and the command prompt, so fix them all at once even if you have not discovered they are broken again.

  These commands from registry removes the registry entries that are stop opening programs.  Although the registry entries do not exist, these commands are safe to run and will work for all versions of XP.

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  Open Notepad to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines of text into the new Notepad file.

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableRegistryTools" = -.
  [HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System]
  "DisableCMD" = -.
  [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]
  "DisableTaskMgr" = -.
  [HKEY_USERS\.default\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
  "DisableCAD" = DWORD: 00000000
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableConfig" = -.
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableSR" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoSetTaskbar" = -.

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:

  enableit.reg

  After you save the file, close Notepad.

  Locate the file enableit.reg on your desktop and double-click it.

  Alternatively, you can right-click on the enableit.reg file, choose open with... and select the registry editor.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  Reboot your system and test.

  You can delete the enableit.reg file when you are finished.

  If the registry editor has also been disabled, we first fix (not a problem).

  Then, you should do this:

  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Restore system is disabled by group policy.

  I use windows xp Home SP3. The turn off System Restore is disabled by group policy.  I can add the new restore points and delete the previous points by the cleaning disc. System Restore settings is also disabled. How to turn on system restore.

  Hi detailed!

  Could you please try the following:

  Click Start, run... , type regeditand press enter

  Click on HKEY_LOCAL_MACHINE
  Click on Software
  Click on the political
  Click Microsoft
  Click Windows NT
  Click SystemRestore

  Now in the right pane, delete DisableConfig and removeDisableSR

  Exit regedit and restart your system

  --> I hope this helps! Please vote or mark as correct answer if it doesn't :)<>

  http://www.xinx.co.uk - my Web site | http://www.systems-and-solutions.co.uk - where I work

  
  Info from Microsoft about phishing . Information from Microsoft on the fake security software

• Impossible to activate the system restore, pop up States disabled by group policy, contact the domain administrator. It's me, duh, I don't know.

  Well, I thought the problem (I am the administrator of my PC) and couldn't solve it. Retrieves group policy in the help files and became totally confused with the convoluted information. Can someone give me a summary of what I need to do to enable this feature? I have Win XP Pro SP3.

  TIA Bill H.

  Try the following article.  This article explains how to disable the system restore, but you can reactivate it by using method 1, then clicking 'turn off' instead of 'enable' in step 3 and 4.

  "How to disable the System Restore Configuration User Interface"
    <>http://support.Microsoft.com/kb/283073 >

  HTH,
  JW