Treo 680 partial contacts takes forever to complete

Similar Questions

• Palm Treo 680 newbie transfer phone contacts

  Just got my Backflip today. Overwhelmed! Has anyone migrated to a Plm Treo 680 and imported data like telephone contact?

  Reli37 wrote:Thanks. I have checked out the threads. Most of my contacts do not have email addresses included and I believe I read that gmail will not pick up accounts without an email.If I put the csv file on the micro sd in the Backflip will I be able to read it?
  

  Here are three applications on the market that will import a CSV file:

  Contacts importer - How to use

  Synchronization of Offline Contacts

  Andook Lite

  I have not tried any of them.

  I have not heard of gmail is not importing the contacts without email.

  If you want to import your contacts on your phone and then it sync from there, to your gmail account, follow these steps to enable synchronization with gmail before you import the contacts. If you do not need to sync with gmail contacts, that you don't have to follow the steps I've linked to.

  Contacts added to the phone will be synchronized with the Motoblur server, but you do not have access to modify or create groups. Contacts don't sync with Motoblur must be edited on the phone.

  Please take what works for you.

• Firefox 7 takes forever to load certain pages, or does not load completely, have markers from place to place and place images...

  Had the same problems with 6 Ff. 1/4 to 1/3 of the pages take forever to load. Sometimes I can make by highlighting the URL and pressing Enter. Sometimes the activity indicator turn right and pirouettes and page never loads. Mark-up appear sometimes where the images should be. Home of the New York Times, for example, partially supported (some missing images) but the links to take forever.

  Open the topic: config page through the address bar and do a search for network.http via the filter at the top of the about: config page.
  
  You can reset all network.http associated prefs which appear "BOLD" (user set) via the context menu to their default values.

  It is generally not a good idea to change these preferences, and these changes can have the opposite effect, by activating especially pipelining for servers that do not support this feature.

  • http://KB.mozillazine.org/Images_or_animations_do_not_load

• Treo 680 not synchronize calendar and contacts, but all the rest OK

  I bought a Treo 680 off of Ebay. It is unlocked.  Phone ATT but I use T-Mobile.  Phone works fine but I can not use the Palm organizer for the calendar or contacts.   I have the reset several times.  When I do everything works except the contacts and calendar.  When I press these buttons or you try to open these apps the Treo immediately reset and never open the app.

  Mac OS?       10.5.6

  Use of Palm desktop

  Version of Palm Desktop 4.2.1 Hot SYnc 5.4.0
  Version of your device?  TREO680-1, 09 - ATT

  Is this a software problem?  Have I not the right software in the computer?  Treo does not work under Mac OS 10.5?

  Also, how is it possible to sync with Entourage?  I use to send and see that others synchronize their phones to read emails.

  Thank you

  I followed your advice on another post.  Released A battery and you press the red when the black line across all the way at the end and pressed the button of the English language.

  I think I solved the problem, if it's not elegant.  I created a new user name and all the little that he was in the new calendar and on the Palm sync perfectly.  Then I copied my old user data, he has replaced in the new folder of userid.  Something came through, some did not.  What I found, it is in contacts, if I just click on the contact and put it in a category it sync next time with the Palm.  With the calendar in the parameters of conduct I said to go from Mac to your handheld, and everything came through.

  If you have any other advice, I would be happy.  Especially how to sync with Entourage since I now use it as my e-mail program.

  Thank you

  Message relates to: Zire 72

• Phone button does not return to the screen of the phone on the Treo 680

  I had a Treo 680 for the past two years. Software is listed as Treo680 - 2.11 - ATT, which I think refers to the update that came out a year ago. But the other day, the phone button (left) brings me to the Favorites screen instead of the phone's screen. I can't understand what I did, assuming that I did anything to make that happen or how do go back. When I check the personal touches, preferences, it lists the phone to phone button, and you can not choose something different.

  Any ideas?

  Robb

  OaklandRobb,

  Are you sync'ing the new device the same username in Palm Desktop as an older device?
  If you are, this will cause problems on the new device. When you synchronize the device, it records the device settings, applications, 3rd party, preferences, etc. in the backup folder in the folder on the PC username. When you synchronize the new device it copies the content of the backup for the old device folder in the new device. This will cause corruption in the settings of the new device, which causes erratic behavior of the new device.

  Here are the instructions for the hard reset and rename the backup file procedure. This procedure will not be re - install any 3rd party applications. You will need to re - install these applications. If you do not have the applications. on your PC for re-setup, you can take the apps. Copy the renamed backup folder, those in the newly named backup folder. When you synchronize applications will be installed. on the Treo.

  Looks like you may need to reset your device and rename your backup folder. Go to http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887 and follow the directions to do a hard reset. Then before of you hotsync your data back you will need to rename your backup folder, to do than go here.

  XP
  C:\Program files\palm or palm one\ [hotsync username]------and rename your backup
  file Backup.Old

  Vista
  Start--> documents\Palm OS Desktop\ [hotsync username]------and rename your backup
  file Backup.Old

  Then hotsync from your current name of hotsync and all your contacts, calendar,
  tasks and memos coming back.

  Show the file extensions for XP or Vista

  XP
  If you cannot view the extensions of file on your PC I would you open a
  folder, go to Tools--> Folder Options--> View (tab) and under Show hidden
  files and folders to uncheck Hide extensions of known file types.

  Vista
  Open control Panel, go to--> View (tab) and under show hidden folder Options
  files and folders to uncheck Hide extensions of known file types.

  Message relates to: Palm i705

• Treo 680 headphones causes hotsync loop

  I have a Palm Treo 680 unlocked working well until a few days ago. While listening to music with pctunes and attached headphones, pctunes locked up and hot sync began in a loop.

  I searched the forum and tried the following to resolve the problem:

  1 soft reset, too many times to count!

  2 clean the contacts for the hotsync cable, with compressed air, then friction alcholol and q-tips.

  3. hard reset a few times first sync after resetting and finally do not sync.

  All to nothing does not. Then I discovered that if I replace the headset it starts randomly hotsync loop. This leads me to believe that the problem lies in the socket for headphones rather than contacts hotsync. I can't find anything on this in the forum. Here's what happens:

  If I insert and remove the helmet a couple of times, start hotsync. Of course, it cannot synchronize because it is not connected to the computer. Sometimes, after that, it will allow normal operation of the buttons, but most of the time, it freezes the screen on the hotsync with no way to get to any other functions of the phone. Because of this problem with the headphone jack, I think I'm dealing with a hardware problem and not software, but I could be wrong.

  With the current hard reset I didn't do a resync with my computer, it should be all the factory without software component programs snap-in settings. I currently don't have the AT & T sim card in because the phone is unusable in this condition. I am using an old Blackberry that I hate!

  I will be grateful for any help or advice anyone can offer.

  There may be a problem with the microphone in the earpiece. Click on the following link for article Palm on this issue.

  http://www.Palm.com/cgi-bin/cso_kbURL.cgi?id=40427

  This usually causes the headset to fail, but it may help to solve your problem.

  I would say to remove the battery and wait at least 1 minute to lower the power of the Treo. Take some alcohol to friction and cushion the plug on the headphones. Connect the headset and turn it several times and also delete and re - insert the plug several times.

  If this does not resolve the problem, the Treo will need to be repaired.

  For reference purposes, click the following link to the support page for your device on the kb.palm.com Web page.
  http://KB.Palm.com/wps/portal/KB/na/Treo/680/unlocked/home/page_en.html

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

• I made the theme retro hack on my iPod Touch (6g) except my iPod Touch takes forever to reset and it slow now. How can I solve this problem?

  I did the thing retro theme on my iPod Touch yesterday and I didn't know it was a cut in time. I saw many people Twitter that he was cool and fun, so I decided to give it a go. My iPod by Touch takes forever to reset (hold down the lock button and the home button) and finally will come the lockscreen, but now his delay. When I type in my password, my iPod is not save it up to maybe a few seconds later. Sometimes it will just restart completely on its own too. Do I have to drain the battery or try restarting on my PC? The Apple store closest to me is a trip of four hours to a new State.

  Be more careful in the future and always check the information you see on social media.

  Try DFU mode, maybe this will help you, although this is not guaranteed.

  Apple is aware of the problem and working on a fix.

  If you have changed the date of May 1970 or earlier and cannot restart your iPhone, iPad or iPod touch - Apple Support

• Its takes forever for a page to load after that I clicked...

  My browser takes forever to respond. I never get tired to wait on a page after I click on it... It feels like im using the dial up when I have high speed internet
  What could be the problem and how to fix this. Help, please
  I use Windows Vista 32 bit and Firefox as my browser
  NB: Everything worked fine until a few days ago

  Hello

  The same problem occurs with Internet Explorer?

  Please make sure Internet Explorer has a default browser and test the question.

  See the link.

  http://Windows.Microsoft.com/en-GB/Windows-Vista/change-your-default-Web-browser

  See also the link.

  http://support.Mozilla.org/en-us/KB/Firefox-slow-how-make-it-faster

  If the problem is only with Firefox, I suggest you to contact Firefox support for assistance.

  http://support.Mozilla.org/en-us/questions

• Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Hello

  Detect and automatically fix problems of CD/DVD
  http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&l=en&s=Gen&docid=56A1F87CD8895B0EE040AE0AB7E15FFC

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• my computer takes forever to load

  original title: loading

  my computer takes forever to load, it did not have it an hour ago. And a message pops up saying something about the script to stop work or something like that. Just started this about 45 minutes ago. What can I do to fix this? I have to reset if the manufacturer or what? Help, please

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  ________________________________________________________________

  If you ever have to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• takes forever to connect

  computer takes forever to turn (IE get in the office)... any ideas what may be the cause?...

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows 7 takes forever to start upward

  When you press the power button on my computer starts a black screen. It sticks for 40 minutes until the Windows startup is displayed, and yes it takes forever for it to take. All together, it takes about 90 minutes for my PC to start.

  When I try to load all the safe mode, he does, is to restart my PC...

  What is happening and what should I do?

  Original title: all sudden Windows 7 takes forever to boot...

  Hello

  Have you made changes on the computer before this problem?

  I suggest you to disconnect all external devices and check if it helps.

  Method 1:

  I suggest you to refer to the article and install the fix.

  Unexpected to slow down the process startup or logon in Windows Server 2008 R2 or in Windows 7

  http://support.Microsoft.com/kb/2617858/en-us

  Method 2:

  Optimize Windows performance
  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Additional information:
  How to speed up your slow computer
  http://support.Microsoft.com/kb/2746761/en-us

  I hope this helps to solve the problem. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• Hotmail takes forever to load the whole snailpace

  It takes forever to read emails... pages reload-sticky... when I try to leave a written message. is "can wait you a little longer" possible to transfer the contacts from hotmail Yahoo BT?

  Hello

  Please note you need to clear your browser cache and temporary internet files to ensure that they are not causing your problem. This is often caused by a corrupted in the browser file.

  1. Which version of Internet browser are you using?
  2. Have you tried working with another browser to check the status of the question?
  3. Are other sites works very well?

  If you work with Internet Explorer, you can try the steps in this link and check if it makes a difference.

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  If the problem still persists, you can ask your question here for assistance.

  Please keep us informed if you need assistance on issues related to Windows.

• Bought the Adobe Pro today / and I need the part of the signature to download and it takes forever - why is - this? Thank you EL

  Bought the Adobe Pro today / and I need the part of the signature to download and it takes forever - why is - this? Thank you EL

  Your subscription to cloud shows correctly on your account page?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If you have more than one email, you will be sure that you use the right Adobe ID?

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Of Treo 680 Bluetooth file transfer

  I am trying to send a file using Bluetooth on my PC (Vista) on my treo 680.  I know that they are paired correctly because I can hotsync via the bt connection.  However, when I try to send a file (.txt) via the Bluetooth connection, windows tells me "invalid argument was provided.  Anyone can shed some light on this problem?

  At this point you may need to contact the manufacturer of your PC and see if your PC Bluetooth stack has the service available for file transfer. If you follow the instructions on the Web page I provided about sending files via Bluetooth, then the issue may be with your PC Bluetooth.

  Message relates to: Palm i705