tried the upgrade from vista basic to vista ultimate and it crashed

Similar Questions

• Number keys don't work since the upgrade from vista to windows, anyone know why?

  Numbers on my laptop keyboard keys don't work since the upgrade from vista to windows7, anyone know why? Keys of numbers very well work in office and other software for browsers

  See the following troubleshooting steps below thanks Azam K with Microsoft Support:

  Try to activate the numeric keypad and check if it helps, here are the steps:

  1. open on-screen keyboard by clicking theStart button,all programs, Accessories, easy accessand then clickingOn-screen Keyboard.

  2. click onOptions, check thepad box and then clickOK.

  I also suggest you to start the computer using safe mode and check if it works properly, following the steps:

  1 restart your computer if it is running.
  2. tap on the F8 key after your initially on powers computer.
  3. Once you see the menu Advanced Boot Options, you can stop tapping.
  4. use the up/down arrow keys to highlight your selection.
  5. select Safe Mode and press ENTER.
  6. you should see loading drivers and wait please.
  7. you should then be at the Welcome screen.
  8. connect to your computer using an account with administrator privileges.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If it works fine in Safe Mode, then try to perform the audit and the clean boot, here's the link:

  http://support.Microsoft.com/kb/929135

  If it is not working in Mode without failure, then try the System File Checker and see if it helps, here are the steps:

  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. click on continue or provide administrator credentials if prompted.
  3. in the command prompt window, type the following text, and then press ENTER:
  sfc/scannow

  Here is an article that will give you information about Scan SFC:
  http://support.Microsoft.com/kb/936212

  I hope this helps!

  OT

  Change options for accessibility on Windows 7
  Control Panel
  l---> ease of access Center
  I---> make the keyboard easier to use
  I---> uncheck "turn on mouse keys.

• I upgraded from vista ultimate to windows 7 64 - error message 0 x 80070490 windows can not find partition for temporary files

  I upgraded from vista ultimate to windows 7 64 - error message 0 x 80070490 windows can't find partition for temporary files - I have a lot of space and created a partition of 1 GB

  Hello

  Thanks for the reply.

  I suggest you to follow a few troubleshooting steps more and check if this helps you fix the problem on your computer.

  Method:

  Reset permissions
  ============

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads

  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:

  off @echo

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f

  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause

  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".
  8. you will see a window of type BACK treatment.

  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  If the same thing happens, move to the next step.

  Run the upgrade by using the built-in Administrator

  ================================

  1. click the button start-> all programs-> Accessories.

  2. right click on command prompt and select "run as Administrator".

  3. click on continue when user account control window appears.

  4 copy the following command and press ENTER:

  NET user administrator / Active: Yes

  5 restart the computer and then log on the computer of this administrator account.

  6. run the upgrade to windows 7.

  Hope this information helps you.

• corrupted files run sfc/scannow, but findstr cannot find details or file on windows 7pro sp.1 upgraded from vista ultimate

  corrupted files run sfc/scannow but findstr cannot find details or file on windows 7pro sp.1 upgraded from vista ultimate cd rw Dvd Player also stopped working cannot download Mr fixit on internet explore 11.

  A possible answer to your dilemma related to the results of the SFC is on this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/SFC-cannot-fix-corrupted-files-in-Windows-7/f798f377-126C-47ff-Bb16-ef5e0dddb5be

• After the upgrade from Vista Home Premium to Windows 7, I can't connect to my router (Netgear WNDR3300)

  After that upgrade from Vista Home Premium to Windows 7 - I'm unable to connect to my router (Netgear WNDR3300) - message network States "the settings saved on this computer for the network do not match the requirements of the network" - any ideas what could have changed during the upgrade to make me lose my connection to the wireless router?

  Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7network/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The upgrade from Vista to Windows 7: How can I make sure that I keep Microsoft Office

  A few months back I took advantage of this offer to upgrade from Vista to Windows 7 for a discounted price. After that I downloaded the upgrade file, Upgrade Advisor told me that because I'm using Vista business and I was upgrade 7, that my computer would probably be home must pass through with a 'clean install', thus wiping my hard drive.

  That's fine with me, I could just move my documents and Favorites on an external hard drive. But I'm afraid that the upgrade will be wipe my Microsoft Office programs.

  I bought this computer a few years ago. I don't even know if I bought the program with office bundled with it, or if I bought it separately (and probably the discs are somewhere in storage).

  How can I make this update without losing Microsoft Office? Is it possible to confirm if my word has come with my computer or if I installed it separately. If it came with it, and I lose it, certainly there must be a free way for me to recover. Right?

  Any other advice for someone planning on the upgrade?

  Thank you!

  You're the one who knows if you installed Office.

  Office (Word, etc.) comes for free with Windows. you have to buy.

  If Office is preinstalled, it was a test.

  A clean installation will wipe everything.

  You cannot transfer programs.

  It needs to be reinstalled from the original media.

  If you do not have the desktop drive:

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  "Download Windows 7 installed and activated on your PC."

  They will help you in the Windows 7 Forum at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• upgrade from vista ultimate to win 7 ultimate

  I bought an alienware with win vista Ultimate edition system, the hard drive is 1 terabite, I installed an ssd with 164 GB I want to use as a single disc to boot with win 7 ultimate (I bought an upgrade), it is possible to do?

  Help, please

  Thank you

  Yes, it is possible.

  You can also follow this:

  http://www.Petri.co.il/upgrading-Windows-Vista-Ultimate-to-Windows-7-ultimate.htm

• The upgrade from Vista to Windows 7

  I'm trying to upgrade my Toshiba Vista laptop to Windows 7 (as a prelude to the Windows 10). The Intel PROset wireless WLAN presence is making it impossible to upgrade complete. Software Intel is in the list of software installed (in programs and features), it does not provide an uninstall option.

  The Toshiba PROset uninstall instructions in their Windows 7 upgrade Instructions are vague:

  1. navigate to the location where the component

  a. Intel PROset 32 or Intel PROset 64

  2. double-click on the component to activate the component

  3. click on 'Start' to begin the installation.

  4 and further information on installing the software - which is very curious because the software is already installed.

  What they speak - which component - where?

  I tried to work around this problem by downloading the software Intel PROset 32 from the Intel site and install them, then uninstall, but it had no effect the previously version PROset install so I still have the same problem, I started with.

  Can someone help with this?   I have the Toshiba Satellite L305-S5946.

  Well, I tried to delete all instances of the registry PROset but that didn't work so I started nose autour in the folder of Toshiba.  I found the magic Installer under C:\Program Files\Toshiba\Comps1\Intel Proset utility (\Manual\B27688A). EXE which is be a demanding free exe to the installation of the Intel Proset utility.  So I installed and uninstalled then (Yes the uninstall option was now available).  So you can see the name of the exe file as it should have been obvious that he was the "element" that Toshiba was talking to in their Windows 7 upgrade description.

  But thanks to you all for your support.

• G60-125NR of the upgrade from Vista to XP Pro drivers needed

  Hello world

  Details of portable illustrated signature.

  I need to upgrade my Vista to XP Pro laptop. The HP site does not really provide any medium for XP as you can see here, it's just the quick launch buttons and the update of the HP software:

  I have the software that is running vista other than the fact that I don't just not like vista used. I managed to get pretty much everything works under XP except for 1 driver missing in the device as Manager indicated below:

  Video (VGA Compatible) controller properties > details shows PCI/VEN_10DE & DEV_0845 & SUBSYS_360A103C & REV_A2\4 & 15DBADC5 & 0 & 0058

  So what I'm looking for right now. Although it would be nice to have all the correct drrivers for this pc run XP (some of what I have work cannot be what he really need).

  What is the new slogan of HP? "Do the PC again" or something like that... lol. Well, I like mine with a side of XP and Linux would take the vista please.

  If anyone here knows what I'm looking for the driver? And if anyone knows where all the correct drivers for this laptop (apart from the one to sell them on ebay) it may be easier to post links to them now instead of having to deal with this issue later.

  Thanks in advance.

  G60-125NR product name
  Microprocessor 2.00 GHz AMD Turion X 2 RM-70 Dual-Core Mobile ProcessorMemory (RAM) 3072 MB
  Video NVIDIA GeForce 8200 M graphics card
  Some good from the points (either way):

• After the upgrade from Vista to Windows 7 games installed in my laptop (Chainz, Cubis and Bejeweled, etc.) have bars on each side when displayed in full screen.

  I have a laptop Acer Aspire with a screen 16:9 wide (15.6 "), it has the latest graphic drivers ATI and all operating system updates.  After the upgrade to W7 (free upgrade with the purchase of the laptop) everything works wonderfully except all the games installed now not displayed in full screen, I get black bars on both sides, they used for Vista, but not with W7.

  I already tried different settings in the games options, administrator, resolutions screen different, being run in maximized 'Vista' and 'Run' mode of the file properties dialog box shortcut and .exe.  This happened without any security program installed that is not a factor.

  I am at a loss.

  This is to maintain the ratio l / h. It is how the images stretch. ATI no longer has the opportunity to play with the proportions for the sort of stuck like that unless you can find in your version of ATI Catalyst. It is in fact full screen as opposed to windowed mode, but it does not cover the entire screen.

  You can try different resolutions within the application to see if it will actually make your apps full screen to use the entire screen. That's all, remains to be done. I don't know why ATI has decided to exclude this option because some people hate the black bars or hate the stretched images.

• Side-by-side configuration is incorrect, after the upgrade from Vista Business to Win7 for AutoCAD, Revit (Autodesk) and most but not all Adobe programs and a few others.

  I have seen many other people having this problem, but none of the soultions has solved the problem.

  After the upgrade to Win 7 Vista Business company. a number of my programs will not work. a mistake

  "The application failed to start because its side-by-side configuration is incorrect."

  train the Viewer even I get this

  Activation context generation failed for "C:\Program Files\AutoCAD 2010\acad.exe". Load Assembly Microsoft.VC90.MFC, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8" was not found. Please use sxstrace.exe for detailed diagnosis.

  I tried to uninstall completely all Autodeck and re install but that has not worked.

  Install the Visual C ++ 2008 Runtime.

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9b2da534-3e03-4391-8a4d-074b9f2bc1bf&displaylang=en

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Cannot start in the middle of the upgrade from Vista to Windows 7

  Try to upgrade one of our own machine for future larger deployments. Windows Vista business to Windows 7 Professional.

  A ran the Advisor Windows 7 and got a little nudge upward after updating Nvidia 7300GT drivers for Windows 7 plug.

  It goes through the process, gather information, copy files... etc. 90 minutes later, it stops and tell me that it cannot start depui this facility. Click here and out you go!

  Don't want to do a clean Reload because tons of the toreinstal program.

  Any suggestions?

  Thank you

  Michel

  Windows Update has nothing to with the upgrade of Windows. Please post future questions about the upgrade in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error message trying to upgrade from Vista to Windows 7

  original title: upgrading Vista to Windows 7
  My laptop is running Vista, and whenever I try to upgrade to Windows 7 it gets 95% done then he tells me impossible to install until I have uninstall the ATI Catalyst Install Manager is - anyone know why. Rick in Chicago

  A lot of software ATI is based on .NET technology and is deeply hooked into the system - personally, I would uninstall all ATI applications before the upgrade and then if necessary updated thereafter, with costs compatible Win7 downloads for ATI Control Center.

• After the upgrade from vista to win 7 can install vista on another system?

  I have an older system which will be an upgrade of vista, can I use my vista software and the key for the upgrade of the old system because I upgraded vista to win 7?

  If you have used the license system / operating of Vista as part of the Windows 7 upgrade process: No.

  You cannot use your Vista license anywhere else if it is part of the Windows 7 upgrade process.

  See you soon...

  .

  Mick Murphy - Microsoft partner

• Problem of PC keyboard laptop Compaq Presario CQ60-224NR after the upgrade from Vista to Windows 7

  I have recently upgraded the OS on my laptop PC Compaq Presario CQ60 224NR Vista Service Pack 2 to Windows 7 Home Premium 32 bit Service Pack 1.  I updated the drivers before upgrading and checked for the latest drivers after upgrade also.  After the upgrade, the keyboard of the laptop works only partially when I use a web browser.  This includes IE and Firefox.  Above the QWERTY keys do not work correctly.  If I press one of these keys or SHIFT and one of these keys, the last character, symbol, or space I typed before is repeated instead.  Y at - it a fix for this problem?

  Well, I searched for several hours and found a solution, at least for me I am a customer of Comcast and I installed constant guard.  There is a key logger that is included in the package that it causes the problem.  I uninstalled GuardedID and my problem disappeared.  I hope it works for you.