trigger a loop to run during the impulse is received

Similar Questions

• I have to check if no job has run during the last five minutes.

  I have to check if no job has run during the last five minutes.
  I need to store five minutes in a table separate from five minutes can be changed to 10 minutes in the future.

  I will be pulling out of this table in the following query.

  SELECT CASE WHEN COUNT (ROW_WID) = 0 THEN 'NO JOBS RAN AFTER THE SPECIFIED TIME"END

  FROM W_ETL_RUN_SDTL WHERE START_TS > (SELECT sysdate - (SELECT * FROM XXAFL_MINUTES) the double);

  
  

  Start_TS - date and time of beginning of the tasks/jobs

  XXAFL_MINUTES - table, which keeps the number of minutes

  
  

  Can you please help me to create the query. I'm not able to store five minutes in the table. What format should be the column?

  The query above returns null, even if a job ran.
  

  If you want to store an interval may be the interval data type would be a reasonable choice. Maybe something like:

  create table check_intervals)

  my_interval days apart on the second

  );

  insert into check_intervals (my_interval) values ('5' minutes of interval);

  Select count (*)

  of dba_scheduler_jobs

  where start_date > (select sysdate - my_interval)

  of check_intervals);

• 3011G satellite freezes the recovery running during the formatting process

  I work in a computer shop, but I think it's better to try to post here and hope for the best, but to send the computer. I'm working on return to Toshiba as DOA.

  Basically, the problem is, when I run the restoration, the computer crashes during the formatting process to 'Progress' 23-11 minutes from the end.

  Since it is not the first time I have a problem with this particular model, I wonder if someone more clever that I had found a workaround... The operating system is Windows Vista and I use original CD to start the recovery.

  Any help would be appreciated.

  PS Excuse the bad English, I'm typing this with my left toe (figuratively). A lot of work today, huh.

  The Satellite 3011 G is unclear to me. Are you sure you typed the series of laptops good?

  In any case, the installation should generally run smoothly, without any functioning anomaly.
  The HARD drive has been formatted in the wrong way or HARD drive could malfunction.

  So in any first you have to format the HARD drive and remove all partitions on the HARD drive
  I noticed several times as HARD drive partitions a bad may have a negative influence on the installation of the OS since the recovery CD!

• error running during the installation of file recovery

  I want to introduce a backupfile recovery again. But during the installation I get the following massage:

  Runtime error!

  Program: C:\system recovery files\backup1.exe

  This application has requested the execution to terminate in an unusual way.

  Please contact the application for more information.

  What to do now?

  The Pavilion DV9623DE system

  Thank you

  Use the "emergency recovery tools' before you try other software in the link I posted above.

  Here's an explanation of how to use ERT

  http://www.SoftThinks.com/FAQs/For_HP.aspx

• Where can get newspaper of reason behind Manager jaxws soap does not run during the webservice call in weblogic 11 g

  Hi guys,.

  http://docs.Oracle.com/CD/E23943_01/Web.1111/e13734/handlers.htm#WSADV189

  I created SOAP manage by top surround URL and deployment artifacts are generated with build.xml.

  I don't know why managers do not run in the web service call in weblogic 11 g.

  Regarding

  Siddharth Singh

  Solution

  Ant was not generating little class and manager xml file

  I manually copy these files

  Maybe Ant was not generating these files because of this warning

  [jwsc] WARNING: types of annotations without Transformers: [javax.xml.bind.annotation.XmlRootElement, javax.xml.bind.annotation.XmlAccessorType, javax.xml.bind.annotation.XmlType, javax.xml.bind.annota

  n.XmlElement]

  [jwsc] 1 WARNING

  Full journal of ants

  D:\SOAP_JMS>Ant f ant - build - jhand.xml
  BuildFile: Ant - build - jhand.xml
  Trying to replace the old definition of the task clientgen

  Build-service4:
  [jwsc] TJ: processing module/om/sai/buddh/SaiWebService
  [jwsc] The analysis of source files
  [jwsc] The analysis of source files
  [jwsc] 1 TJS files processing for the module/om/sai/buddh/SaiWebService
  [jwsc] TJ: D:\Oracle-ESB-RND\EncrpytionDecriptionWS\src\om\sai\buddh\SaiWebService.java valid.
  [jwsc] Treatment of the web services JAX - WS 1...
  [jwsc] WARNING: types of annotations without Transformers: [javax.xml.bind.annotation.XmlRootElement, javax.xml.bind.annotat
  tion. XmlElement]
  [jwsc] 1 WARNING
  [jwsc] Compilation of 5 source files for C:\Users\si244339\AppData\Local\Temp\_y1j0ng
  [jwsc] Building jar: D:\SOAP_JMS\outputnew\AAJAXHandlerSai1EarResponseQ\om\sai\buddh\SaiWebService.war
  [jwsc] Created JWS deployment outputFile: D:\SOAP_JMS\outputnew\AAJAXHandlerSai1EarResponseQ\om\sai\buddh\SaiWebServic
  [jwsc] [EarFile] Application file: D:\SOAP_JMS\outputnew\AAJAXHandlerSai1EarResponseQ\META-INF\application.xml
  [AntUtil.deleteDir] remove directory C:\Users\si244339\AppData\Local\Temp\_y1j0ng

  BUILD SUCCESSFULLY

• App should run in the background to receive push?

  Hello.

  I am currently able to receive notifications of type push my application with the app running in the background. Is this necessary? Do all applications that can receive notifications of type push in the background? Are there better ways to do this?

  Thank you.

  A Thread is not an Application.  Threads always run in the background.  When you ask in the foreground, your application moves to the foreground.  When you ask background, your Application moves to the back.  This seems to be what you want, so what had coded you before was the right thing to do.

  When you call super.close () on a screen, if the screen is the last on the stack, that will close the Application, which will close all Threads.

  Does that help?

• Digest the lag when running during the generation of the ant script

  I'm tying all libraries referenced by my Flex as RSL project. When I do this through Flex Builder seems to work.  When I try to do it via an Ant build script to the mxmlc task the build succeeds (everything compiles) but when running, I get error #1001 Flex: mismatch with RSL Digest for datavisualization.swc.  Not sure why I make this especially since I specify datavisualization.swf in the rsl url not a swz file. Both methods give the same set of swf, SWC, and swz files in the deployment folder.  I can't understand what is different between the two build processes after comparing the .actionScriptProperties with the ant script.  Can anyone help to shed light on this or help me understand how push wrong with that? Thank you.

  My task as mxmlx:

  < mxmlc
  file = "${Flex.main.file}" "
  output = "${Flex.output.swf}" "
  ActionScript-file-encoding = 'UTF-8 '.
  Keep-generated-actionscript = "false".
  link-TIME-shared-library static = "false".
  local = "en_US."
  MaxMemory = "256 m" >
  
  < path-element source-path = "${PROJECT_FRAMEWORKS}" / >
  
  < dir external-library-path = "${PROJECT_FRAMEWORKS} / libs/player" includes = "playerglobal.swc" / >

  "< path-element="${PROJECT_FRAMEWORKS}/libs/framework.swc DURATION-shared-library-path ">

  < url rsl - url = ' framework_$ {FLEX_BUILD} .swf ".
  < url rsl - url = ' framework_$ {FLEX_BUILD} .swz "/ >
  < / DURATION-shared-library-path >
  
  "< path-element="${PROJECT_FRAMEWORKS}/libs/rpc.swc DURATION-shared-library-path ">
  < url rsl - url = "rpc_$ {FLEX_BUILD} .swf" / >
  < url rsl - url = "rpc_$ {FLEX_BUILD} .swz" / >
  < / DURATION-shared-library-path >
  
  < runtime-shared-library-path
  Path-Element="${PROJECT_FRAMEWORKS}/libs/Automation.swc" >
  < url rsl - url = "automation.swf" / >
  < / DURATION-shared-library-path >
  
  < runtime-shared-library-path
  Path-Element="${PROJECT_FRAMEWORKS}/libs/automation_agent.swc" >
  < url rsl - url = "automation_agent.swf" / >
  < / DURATION-shared-library-path >
  
  < runtime-shared-library-path
  Path-Element="${PROJECT_FRAMEWORKS}/libs/automation_dmv.swc" >
  < url rsl - url = "automation_dmv.swf" / >
  < / DURATION-shared-library-path >
  
  < runtime-shared-library-path
  Path-Element="${PROJECT_FRAMEWORKS}/libs/automation_flashflexkit.swc" >
  < url rsl - url = "automation_flashflexkit.swf" / >
  < / DURATION-shared-library-path >
  
  < runtime-shared-library-path
  Path-Element="${PROJECT_FRAMEWORKS}/libs/DataVisualization.swc" >
  < url rsl - url = "datavisualization.swf" / >
  < / DURATION-shared-library-path >
  
  < runtime-shared-library-path
  Path-Element="${PROJECT_FRAMEWORKS}/libs/Flex.swc" >
  < url rsl - url = "flex.swf" / >
  < / DURATION-shared-library-path >

  < runtime-shared-library-path
  Path-Element="${PROJECT_FRAMEWORKS}/libs/qtp.swc" >
  < url rsl - url = "qtp.swf" / >
  < / DURATION-shared-library-path >
  
  < runtime-shared-library-path
  Path-Element="${PROJECT_FRAMEWORKS}/libs/Utilities.swc" >
  < url rsl - url = "utilities.swf" / >
  < / DURATION-shared-library-path >
  
  < compile .library-path dir = "${PROJECT_FRAMEWORKS}" / locale ' append = "true" > "
  < name = "{local}" / >
  < / compile .library-path >
  
  ...
  
  < default width = "500" height = "600" / >
  < / mxmlc >

  I didn't write the patch, but I just took a quick glance. I think that the "url" element has been renamed to "rsl - url" and new elements have been added as "failover-url". You can try to match this new syntax, but I don't think that this patch will be agreed due to rename it.

  -Darrell

• Creative Cloud-Dungeon no cloud prior apps running during the learning curve?

  Yesterday, I bought the monthly creative cloud. Before going through the steps to download my new apps, I want to be sure I can KEEP AND USE my existing applications - InDesign CS5.5 but also CS5.1 Photoshop and Dreamweaver CS5.5. It is because I have a website and small business online and want to be sure, I can go forward so that I have the new software learning curve (in order to make my site mobile friendly).

  Yes, you can use the previous versions.

• Y at - it an easy way to highlight the current iteration of a currently running on the front panel of a for or while loop?

  Y at - it an easy way to show on the Panel before which iteration of a loop is running during the time the loop runs.

  Thank you

  Chuck M.

  Unless I'm missing something...

  

• Emergency aid! How can I run in the same block diagram two separate labview codes each with a diferent execution timings?

  Dear all.

  I have 2 progrlams application in the same schema. the intention is to use the 2 different when excuting programs for different applications, and each have to stop and start button, of course, I'll have to stop master. But when I run the program, it works as a program in time, it's the 1st block which I make active only, when I tried to activate the second block, that won't work, works only when I stopped the1st one. So, he wants your help, how can I solve my problem. Here I am attaching some of my programs.

  Kind regards!

  Furthermore, if you want two loops to run at the same time, just this.

  

• process Oracle run during installation

  Hi all
  
  I want to know what are all the processes that are running during the installation of oracle database.
  
  
  BR
  Sphinx

  It creates a file pfile
  It creates the database
  He started the database
  It adds some tablespaces and additional files
  It creates the data dictionary
  It installs (if requested) sample schemas
  It installs and configures other options (if requested)

  These are the things that come to mind (about DBCA)

• Node of collapse during the R12 upgrade

  Hi all
  
  I have a question regarding the collapse of one of our nodes of E-Business.
  
  Our current environment is 11.5.9.2. Web/forms are on one W2003 node and "everything else" is on since the HP - UX node. Due to changes in our business, we look at the whole of the application running on a node, our HP - UX server. Of course, we would like to test this out first to make sure that no problem of performance.
  
  My question: in the 11.5.9.2 > R12 upgrade process, you run rapidwiz. Rapidwiz ask you what components are on which node. I think it should be possible to remove our W2003 node during upgrade (process rapidwiz). Rapidwiz should create services http, etc. on HP - UX and we should be ok? Good or bad?
  
  Thank you all... colin

  Colin,

  You must move the components you have on Windows server to the node in HP - UX (as shown (Note: 238276.1 - migration to Linux with the Oracle Applications 11i version) before you start the upgrade that you already have files on the Windows node and install quickly running during the upgrade isn't enough.)

  I think that your approach is not supported, you can check with the support of Oracle.

  Note: Please make sure that you have enough resources on the computer from HP - UX and test the performance before proceeding with this plan.

  Kind regards
  Hussein

• Other results: preliminary report does not properly during the first run in a loop

  I have an unusual problem with NI TestStand 4.1. I have a loop For and it contains, I have a call from sequence configured as a test of numerical limit. This test is configured to report additional results. All other results are preconditioned test cases. Here's the unusual part: during the first iteration of the loop, the test passes yet additional results for the parameters of all inputs are reported (output parameters are not presented at the time, but more on this later). Spend all additional this test iterations in the loop For and additional results are not reported.

  Regarding output parameters... If a test fails I'm expecting (input and output parameters) results to report. However when I encounter a failure only the additional results that are output parameters are displayed on the test report. Input parameters are not reported.

  If anyone else has experienced this? My expectation was that all additional results would be declared in case of failure. In addition, in the absence of a failure I expect not to see additional results. Thanks in advance!

  The short answer is that the condition of additional results for input is evaluated before it's called the subsequence, so that it uses the value of the previous iteration Step.Result.Numeric (or by default on the first).

  You can see this described as stage 15 in the following link:

  http://zone.NI.com/reference/en-XX/help/370052P-01/tsfundamentals/infotopics/step_execution/

  Kind regards

• Maximum limit for the number of periods loops that can be run at the same time?

  I am developing a simulator that requires many pieces of code to execute in parallel.  As a result, we were in loops just for this purpose.  I didn't count but there are close to 100 call loops that eventually run at a given time.

  A week ago, I've reached a point where the Simulator was working fine but when I added a more timed loop, it would break LabVIEW.  When I say LabVIEW crashed, I want to say there is no warnings that popped up, and LabVIEW just stopped completely.  Worse still, LabVIEW didn't offer even to recover the work when I start it back up again.  However, removing an additional timed loop allows everyone to work normally again.

  I'm under LabVIEW 2009 Version 9.0f3 (32 bit).  I have observed this behavior even on two different systems, one that is 3.2 GHz Xeon Quad-core with 2.0 GB of RAM, running Windows XP SP3 (32 bit) and the other is a 3.0 GHz AMD Athlon 64 Dual Core with 4.0 GB of RAM, running Windows 7 Professional (64 bit).

  Because the two systems are quite different, and LabVIEW appears to hang at the same point, I wonder if someone has already noticed such behavior.  I searched online and can't seem to find any reference to such a limit on call loops.

  One last thing.  I made an attempt to replace all the loops timed with while loops, but this seems to lead to some kind of hunger because the Simulator becomes suddenly jerky, without seeming to consume all resources more than when the call loops were in place.  So, which doesn't seem to be an option.

  I think that you are limited to 128 Timed loops in a system. Could not find anything by specifying that online, I am sure that I heard him. Also, the Sources Software-Triggered clock Timing loops can only be counted between 0-127.

  However, it certainly sounds like a bug that LabVIEW would crash during the approach of this limit rather than up a significant error.

  You can do some things to help avoid the unstable behaviour of the normal use of many parallels while loops. Place one or more loops in subVIs and then distribute these subVIs enforcement systems . This will give you your application with multiple threads of execution, which will reduce the ground being. If you don't do this, your curls probably all run System Standard of performance, which, by default, cannot have 8 wires at his disposal to share between all the loops.

• Installation of El Capitan problem: "an error occurred during the preparation of the installation. Try running the application again. »

  I've been a fight 2 days now trying to improve my iMac 21.5 2009 end of Mavericks in El Capitan, but as the installation is about to be launched I get this message "an error occurred during the preparation of the installation. Try running the application again".

  Here is a list of all the things I've tried:

  Running the application again;

  Move the installation to another folder application;

  Control date & time and it was already correct;

  Do the installation in safe mode;

  Installation of the upgrade of another user I created only for that purpose;

  The computer restarts and I tried install the upgrade several times;

  And, to be sure that the installation application was not corrupted I made a copy of it on an external HD and tried to install it on my 2011 MacBook Air and it worked (I didn't install because I have El Capitan installed on my MacBook).

  Well, I don't know what else can be done, and I'd rather not have to completely restore my iMac.

  Please try installing again after taking each of these steps you have already taken it.

  Step 1

  Reset the PRAM from your computer.

  Step 2

  If possible, set the clock system as indicated here. If you can only boot into recovery mode, see below.

  In the OS X Utilities screen, select get online help. Safari will launch. While in recovery, you will have no access to your bookmarks or history. Load this web page.

  Triple-click anywhere in the line below to select:

  date 0801000014

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Quit Safari. You go back to the OS X Utilities screen.

  Select

  Utilities ▹ Terminal

  in the menu bar. It will open a Terminal window. Paste in the window by pressing the command-V key combination.

  Wait for a new line ending with a dollar sign ($) below what you entered. If it does not appear, press return.

  Quit the Terminal to return to the main screen.

  Step 3

  If your model has replaceable memory by the user and you have upgraded modules of memory, reinstall the original memory and see if there is any improvement. Make sure not to touch the Gold contacts. Clean them with a mild solvent such as rubbing alcohol. Spare memory must exactly match the technical specifications of the machine. Do not install more memory to the maximum value specified, even if a seller of RAM, or someone else, said you that it will work.

  Step 4

  Back up the data at least two different storage devices, if you haven't done so already. A backup is not enough to be sure. Backups are possible with Time Machine or disk utility. Preferably both.

  Erase and install OS X. This operation will destroy all the data on the boot volume, if you be better be sure backups.