Trojan.Bankpatch.Clif Norton shows he infected "Powrprof.dll" but cannot automatically remove / fix.

Similar Questions

• I try to print 4 x 6 photos.  How to print borderless on LR5 with my HP OfficeJet 7410?  Even in print in LR5 mode, my photographs show a border.  Setup page displays "without borders".  Image settings show "zoom to fill". But cannot print, or same prelif

  I try to print 4 x 6 photos.  How to print borderless on LR5 with my HP OfficeJet 7410?  Even in print in LR5 mode, my photographs show a border.  Setup page displays "without borders".  Image settings show "zoom to fill". But cannot print, or even listen to excerpts, without borders.

  What is your size of cell on in the print module? Cell size sliders must be completely to the right, and the margins should be set to 0.

• After update my WebRoot showed the infected files.

  Installed the update KB2883201 and KB2885699 today and after I restarted my Webroot protective hemen advised me of 2 infected files.  I removed and then them reread - all of a sudden there were 18 more infected files.  My antivirus has removed all threats, but if anyone has had this problem?  How updates of Windows can have virus inside if they come from Microsoft?

  Hi Suzanne,.

  Outside these Windows updates, there are any changes (hardware or software) on the computer before the show?

  You will find the Description of these KB articles:

  http://support.Microsoft.com/kb/2883201/en-us

  http://support.Microsoft.com/kb/2885699/en-us

  Updates of Windows will never contain any viruses. These Windows updates are necessary for the computer to work properly because they improve the performance of the computer.

  Answer please if you have any questions.

• Threat found using Avast, Win32: Trojan-gen, moved to the chest, but how to remove it?

  I use Avast free version for my anti-virus software.  This morning I did a full scan and it came back with 1 found threat: Win32: Trojan-gen.  He asked me what I would like to take.  At first I chose it remove but I get an error message saying that action was not executed.  I chose and then move to the chest.  This action was confirmed.  That move "chest" means?  East - identical to a virus threat?  I have to do something more?  TIA

  Sandee

  Hello

  Move to the chest means he has been quarantined and, consequently, nuetralized. You can either leave it there, delete it,
  or if it was a false positive, then you can restore it back to where it was.

  For more information on Avast, please check these sources.

  Avast - Support
  http://www.avast.com/support

  Avast - Forums
  http://Forum.avast.com/

  ===========

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 to get infections of virus and spyware. Seehttp://www.microsoft.com/protect/support/default.mspx for more details. For international information, check your subsidiary local Support site.

  I hope this helps.

• I got a message that there is an hour: Trojan.Win32.Generic detected in the time machine.  How can I remove it? Is this true?

  I received a message that there is an hour: Trojan.Win32.Generic detected in the time machine.  How can I remove it? Is this true?

  I have the version of yosemite 10.10.5 OSX macbook air.

  Whence this message?

• Mac Pro 2014 Retina screen shows lightning under empty battery but won't turn on

  Screen shows lightning under empty battery, but won't turn on. I had plugged it with two adapters to support different (long and short) that accompanies the retina macbook 17 inches. Ive left plugged in for 24 hours and still will not light. I have tried reseting everything I saw on the forum other messages such as pressing shift-control-alt-power - release and then pressing button works / stop and nothing. Sometimes just showing the Red/low battery with Flash below the middle of the screen, but it will not activate. I have all my work on this computer and need to have on it.

  The green light on the magnetic charge cable is not, however, this has only worked from time to time and then for a while so I was not worried about it. Any advice?

  You have to go to an Apple Store or an authorized Service provider. The fact and take up virtually even with different Chargers, the indicator light on the MagSafe does not light up and the display on the screen of the cries of hardware problems. And these sealed Macs really are repairable no-no.

• IPhone unlocked 6 works on all carriers of the United Kingdom, but will not activate on mobile of delight that use EE network sim works in my 4S but 6 says not found carrier shows 3 bar on signal but will not activate the phone?

  uunlocked iphone6 works on all networks 4uk but does not work on mobile thegy delight use EE network it shows 3 bars of signal, but no name even sim card works fine in my 4S but bearer of 6 sows not found mobile delight just advise manual setting of the bu AFN will still not be enabled?

  any help appreciated MikeC

  Contact the carrier. In all cases the pleasure is not a carrier official iPhone.

• The Epson Workforce 600 is connected via a usb cable, the other is a wireless network. I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it does not list

  I have two printers installed on my laptop, only appears.  The Epson Workforce 600 is connected via a usb cable, the other is a wireless network.  I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it is not the list when I go to print something.  When I select "Find a printer", it gives me a list of computer icons.

  Hello

  Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
  responsible for the proper functioning of the printer and their drivers provided.

  Good luck, you need to update or reinstall the latest driver.

  Epson - Support us.
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Epson - support from Europe
  http://www.Epson.co.UK/support

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• c:\windows\system32\powrprof.dll has stopped working or has an error.

  I tried to open a session, but a popeed of message saying c:\windows\system32\powrprof.dll has stopped working or has an error. I'm not sure what this means or what past... I did not any changes to my computer lately.

  How can I fix?

  You forgot to specify what system you use, if it's Windows XP, Vista, Windows 7, or even Windows 98.

  Powrprof.dll library contains functions for Configuration of Microsoft Windows Power Management Tools.

  1. http://support.microsoft.com/kb/q188213/
  Error message: error loading Powrprof.dll

  For Windows 98

  2 powrprof.dll errors might indicate a registry problem problem, a virus or malware.

  If you are using Windows 98, suggest you only look at the possibility of a virus or malware problem.

  TaurArian [MVP] 2005-2010 - Update Services

• On my laptop - HP Pavilion dv7, the audio led on the keboard remains orange when I turn on and outside. When on this subject that is supposed to be a white light showing that it is on. How can I fix it? It happened when I upgraded to Windows 7 from Vis

  On my laptop - HP Pavilion dv7, the audio led on the keboard remains orange when I turn on and outside.  When on this subject that is supposed to be a white light showing that it is on.  How can I fix it?  It happened when I upgraded to Windows 7 from Vista.  Help, please?

  Windows Update has nothing to do with the upgrade of Windows. Try posting in one of these specific forums Win7:

  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  http://social.answers.Microsoft.com/forums/en-us/w7performance/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?

  I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?

  Hi Kerrkid90,

  Welcome to the Microsoft Answers Community Forum site!

  To launch the browser, I want to suggest you to log on as an administrator in 1. Download the game

  2. run the setup.exe file

  3. right-click on it and run as administrator.

  If it fails, suggest to run the Windows Installer Cleanup utility by visiting the following link:

  http://support.Microsoft.com/kb/290301

  In the case if the above methods fail, you can also contact last chaos community to help you fix this problem:

  http://forums.aeriagames.com/?f=6

  I hope this helps!

  Thank you best regards &,.

  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• kb2707511 shows that it is installed but appears always that the update is ready to be installed.

  kb2707511 shows that it is installed but appears always that the update is ready to be installed. I uninstalled it down loaded the file and reinstalled, still the same thing, Fix - it Ran no problem detected, a suggestion? Windows xp home Service pack 3

  I also ran my anti-virus (AVG) Spy bot S & D, Microsoft Safety Scanner program and no problem found in none of the scans.

  I just want to update my post, I installed the kb2707511 update in the safe mode and so far he has not yet presented. Keep your fingers crossed that it does not yet appear. Thanks to all the people on this site that help people.

• Properties on my records show that about 25 GB, but when I check the properties on the disk C it says I have 103 GB

  Properties on my records show that about 25 GB, but when I check the properties on the disk C it says I have 103 GB. Are these files was hiding all? and how do I know if I can delete them or when they are?

  My computer is running out of disk space, and I want to delete some files, so the computer longer smooth but I can not find about 80 GB which is supposed to be on my computer.

  Very likely. This includes your Hibernate file, if there is one, your pagefile, and (I think) the Restore Points.

  You have a single hard drive? If so, how much is spread over it? If only a C: partition, how big is it and how much space you have?

  Deleting files (unless the hard drive is almost completely filled) won't help your performance. After the back if you need advice.

• NtrigApplet - unable to connect to the driver: failed to open device___TVAgent.exe - Entry Point not found the procedure entry point PowerReadACValue could not be found in the dynamic library POWRPROF.dll

  Hi all

  I have a HP TouchSmart tx2-1025dx Notebook PC Vista... I met 2 large pop-up windows that will not close & appear as soon as I turn on my computer gives me a time DIFFICULT to access anything whatsoever...

  They read as follows:

  NtrigApplet - unable to connect to the driver: failure to open the device

  TVAgent.exe - Entry Point not found the procedure point PowerReadACValue entry is not found in the dynamic library POWRPROF.dll

  CAN SOMEONE PLEASE HELP?
  THANK U :)

  Hi the apprentice 85,

  Remember to make changes to the computer before that happened?

  Looks like the problem is hardware or software related, I suggest you follow the below mentioned steps below to refine the question

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

   

  Step 2: Put the computer to boot to determine which program is causing the problem

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Opengl32.dll is not designed to run on windows or it contains an error. I reinstalled the graphics drivers. During the execution of the games, it shows this error. What should I do to fix this?

  Opengl32.dll is not designed to run on windows or it contains an error. I reinstalled the graphics drivers. During the execution of the games, it shows this error. What should I do to fix this? Is it a graphic file or a file from microsoft?

  Hi Jason,

  1. What is the number of brand and model of your system and graphics card?

  2 did you a recent software or hardware changes to the system?

  This error can be caused by an application, including any old games you have installed on your system.

  Because you tried to reinstall the drivers for video card, you can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.