Trojan threatens called cryptic.due

I have avg antivirus protection. It keeps saying that I have a Trojan called threat cryptic.due horse, when I move to vault avg keeps coated. I ran the last scan of microsoft security analysis and says no virus detected.

is this a known threat?

Because this detection is not confirmed and may be a false positive, it might help to make the item detected at one or more of the multiscanners:

http://VirusScan.jotti.org/en

http://VirSCAN.org/index.php

http://www.VirusTotal.com/

If only AVG detects this Trojan, you can report the AVG detecting as their FP potential:

http://forums.Avg.com/us-en/AVG-forums?sec=thread&Act=show&ID=395

Also, look at this thread of AVG forum for more information:

http://forums.Avg.com/us-en/AVG-forums?sec=thread&Act=show&ID=186062

Tags: Windows

Similar Questions

  • During a call to ActionVoip, getting the message "End call (call failed due to sound device on this computer problems)"

    Original title: I use Windows 7 Edition home premium.  When I am dialing from ActionVoip I get the message ' call ends (the call failed due to problems of audio device on this computer. "pls help...

    I use Windows 7 Edition home premium.  When I am dialing from ActionVoip I get the message ' call ends (the call failed due to problems of audio device on this computer. "pls help...

    Hello
     
    1. do you get errors related to other audio devices on the computer?
    2. what type of audio device you use? (You use a headset? If so, who is the manufacturer and what is the model?)
    3. in Device Manager, is the sound, video and game controllers show any exclamation point?
    4. have you made any software or changes to the material on the computer before this problem?

    Open the Device Manager

     
    To work on the issue, refer to these methods.
     
    Method 1:

    No sound in Windows

     
    Method 2:
     
    Reinstall the program in compatibility mode.
     
    Check out these links.
     
    Uninstall or change a program
     
    Install a program
     
    Make older programs run in this version of Windows

    Hope the information is useful.

  • G Tech support on trojan Virus call

    I got a call from a company called G Tech support claiming I have some virus Trojan affecting computers on the West Coast. He took me in mt computer an mre have shown a screen that showed a few errors. They want $115 to correct this breach of security. I tink it's a scam, but my computer has had problems lately. Can you tell me if this is a scam or not? Their site says key partner for Microsoft.

    Hello

    Web sites can be rigged, it's a scam.

    ----------

    In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
    Watch groups. Arm yourself with knowledge.

    No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
    computer. So that's the fraud or scams to get your money or worse to steal your identity.

    Do not fall for the fake phone Tech Support
    http://blogs.msdn.com/b/securitytipstalk/archive/2010/03/09/Don-t-fall-for-phony-phone-tech-support.aspx

    Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
    phone calls to help you fix your computer
    http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

    Scams and hoaxes
    http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

    Microsoft Support Center consumer
    https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

    Microsoft technical support
    http://support.Microsoft.com/contactus/?ws=support#TAB0

    Microsoft - contact technical support
    http://Windows.Microsoft.com/en-us/Windows/help/contact-support

    ===========================================================
    ===========================================================

    Follow these steps carefully:

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be more difficult to detect as the
    cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
    It will display all the infections in the report after you run - if it will not run changed the name of
    TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
    check with the other methods below.
    http://support.Kaspersky.com/viruses/solutions?QID=208280684

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
    security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
    here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    New Vista and Windows 7 version
    http://OneCare.live.com/site/en-us/Center/whatsnew.htm

    Original version
    http://OneCare.live.com/site/en-us/default.htm

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    After the removal of malicious programs:

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    ======================================

    If necessary AFTER THAT you are sure that the machine is clean of any malware.

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • External calls to CTS-3000 using CUCM

    Hello

    I'm trying to configure the scenario below, and I just want to know if it is supported

    We have a system of telepresence CTS-3000 registered to a CUCM dedicated just for telepresence units. We have ICT trunk between telepresence CUCM and CUCM have registered phones who works for inter-classes calls.

    When I ring a number external unity of the CTS, the call gets initiated and falls straight lines. I registered an IP phone to telepresence CUCM and I can make outgoing calls.

    On newspapers of the CTS, I see a "call ended due to the distance point of endpoint resource unavailable ' error.

    Thanks in advance

    If you try to call from your CTS, through ICT devices on CUCM telephony?  What are the endpoints you are trying to call?

    CTS endpoints use telepresence Interoperability Protocol (TIP) for call control.  Only endpoints speak advanced the CTS models are CTM bridge.  Video normal Cisco phones do not TIP (including 9971, 7985, CUVC, etc.).  Audio only phones also do not speak the TIP.  Basically, the CTS rooms can only call each other without a MCU such as Community trade marks or the server of telepresence from Tandberg/Codian.

  • Help blackBerry Smartphones! No outgoing call...

    Hello

    I just got a new 9700 and when I'm composing it gives me me the following message.

    Call failed due to the error of control box SIM Toolkit. Please try again later.

    and then I get a second message-

    SIM: Call inadmissible.

    I tried to update its version to change the settings, called my network (which told me to try to format its software) but no luck so far...

    I would appreciate your help,

    Thank you!!

    Your sim card is old.  Go to your provider and get a new sim card.  This seems to be the solution.

    Why go avec.743 when you can obtenir.862?  Follow the instructions (exactly) from the first post of the following thread:

    http://www.BlackBerryForums.com/General-9700-series-discussion-bold-2/232638-latest-OS-9700-5-0-0-14...

  • How to retrieve error messages after failed call Web service or pl/sql

    Hi all

    The EBS version: 12.1.1 on windows 2008 server.

    I'm calling pl/sqls via the ISG (process_item, process_eco...). If a call fails due to wrong input parameters, it returns an 'E' to me according to the Statute, a count of the number of error messages were collected, but no message itself? Is there an extra function call to get the error messages? I found FND_MESSAGE-GET but it does not return me anything!

    Thank you
    Konrad

    Hi Konrad,.

    As we found out, search the repository for internal name ERROR_HANDLER integration and use. Informing the public the answer for this one!

    Kind regards
    Gareth
    http://garethroberts.blogspot.com

  • Cracked screen

    Hello guys!

    I use a 6 s iPhone for almost a year. Recently my cousin threw to the ground violently. I picked up and saw that the screen was cracked badly. There was a hole in the side at the bottom right, I could easily see the material of the speaker.

    First of all, on the first day, speaker, touch, touch id worked. Second day, touch has not worked, but the calls came. due to the touch, I couldn't answer.

    Second, on the third day, the calls came but were not sounds. vibration worked. but I felt that he had become slow to unlock and lock. sounds came later.

    Now, I want to correct. I saw in the apple website which display could be repaired. I guess that there are a lot more problems and cracks on the inside. Besides I don't have an Apple store in my country Bangladesh, South Asia. All I have is some authorized stores.

    I don't know if it will be fixed or not. Please tell me the cost and how to fix it. I don't have AppleCare.

    Please, use this link: contact support

  • I have a G4 laptop.  I put a new hard drive in it?

    I have a G4 laptop in very good condition, but there is very little space on the hard disk.  Can I put a new one in it?

    Yes, although the effort can be called "Difficult" due to other elements

    in the path before the actual task is completed. Not only the wires or cables.

    the screws are different lengths and must therefore be ordered so that you can

    keep track of their investment for better.

    Replacement of the disks hard ATA/IDE rotation is more difficult to obtain, and

    a better alternative is a product available (example) OWC

    It is a Solid State Drive. Faster, the performance of the system greatly improve

    and consumes less energy. An example of 60 GB is here for ATA; they have other:

    https://eShop.MacSales.com/item/OWC/SSDMLP060/

    Examples include when above is also presented on the website page

    is a rotating disk hard of 60Go, much less expensive. does not improve

    performance, as does an SSD, especially if you are using Leopard 10.5.8.

    https://eShop.MacSales.com/search/?q=iBook%20g4 & filter.catidpath = 4081

    Instructions on the replacement hard drive with additional detail in the commentary to the user

    section, located at the iFixit repair for iBook G4 guide page. See your:

    https://www.iFixit.com/device/iBook_G4

    Good luck in this case!

  • I would like to make a small point here...

    I saw a lot of messages from people who are to "palm pre do X, and I'm screwed cause I was counting on that.

    If you relied on it, and you're really fucked, then the person who screwed up is you.  No Palm or Sprint.

    < soapbox >

    We call it due diligence for a reason and the thing * is * a 1.0 version, people.

    I bought mine on a new area of activity, hoping they would find * any * way to cancel my old service on my partner's account and the port number in a month when I'm ok with it.  In the meantime, I have * kept * Nextel BlackBerry 7100i that was my phone for 4 years and 5 replacements (yay, CLOSE), because it's the kind of judgment my employer pay me to have: If you are important enough that Palm or Sprint you screwing that may affect your work, then you have not * put * your job on the line for the new toy until you don't know not to the task.

    If I am not happy with the progress it makes in the next 25 days, then I'll put it back.  And I'm out, what?

    3 hours on Saturday and the only accessory I bought was a Plantronics Pro that I buy anyway (and I'm very happy with, Yes, thank you).

    Oh and two a month phone bills.

    Small price to pay for my bosses upset me not.

    If you're in this in-between place where you cannot afford to do it this way, but you're stuck if it screws to the top...

    Then, you're not the launch customer for the front.

    < / soapbox >

    It's just a phone, people.  And if she is not just a phone for you, then wait for 3 months...

    I think that this Troll was fed enough by everyone, including me.

  • Have Skype prepaid card sent the United States into Europe SE. I can't add account

    OK, I had a map of Skype photographed and sent me 5 months ago. It works great, but I have to make a number of calls and sent a new card, but there is no way to enter additional credit to my account. The service here for some reason any now will not acknowledge receipt of a prepaid card of Skype, but he has done it before.

    I have to get this working soon, to make a few calls families, due to medical emergencies I need to talk with a family, who do not have computers, only phone and the cost of the calls of the sea is too much the other way.

    This might also work.

    I finally got a member of the family to get back online on Skype.

    They entered the process that appears in the United States on their computer.

    and then they were copied and sent me the URL they receive on their computer

    www.Skype.com/go/prepaidcardUS.

    It seems crazy to me that I couldn't get this URL out of the SE Europe

    I think maybe Skype needs a feature saying something like

    [I am a U.S. citizen, travel, business or study abroad and need to add

    money on my Skype account with a prepaid card] who could help.

    I don't know where to send such information to company Skype appropriate

    but it would have helped me.

  • How can I change the ID of the operating system?

    I'm under Debian GNU/Linux, where Firefox is called Iceweasel due to restrictions on redistribution license. How do I ID as "Firefox/Windows XP service pack 2" instead?

    URL of affected sites

    http://Netflix.com

    Try to install the addon named User Agent Switcher. Then you should be able to choose between several preset User Agent strings or define your own. This site can be useful for this task.

    This string is very likely that you have been looking for:
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3

  • How and where can I report an email from a pirate to the authorities?

    My friend yahoo address has been hacked. Not knowing this, that I said to my friend.   The pirate responded to me!  They are claiming to be stuck in the Philippines & asking for money to pay their hotel bills and hospital.  I want that the police or a person to find it!  My friend is aware that its password questions & security have been compromised. IT IS URGENT!

    This solution article provides information on how to report abuse and SPAM in Windows Live Hotmail.

    To report a spam or unsolicited e-mail:

    * Windows Live Hotmail customers should click the "Junk" to the report Spam button.

    * Non-Windows Live Hotmail customers should address an email to * address email is removed from the privacy *, * address email is removed from the privacy * or * address email is removed from the privacy * (according to the original e-mail domain: hotmail or msn or live). Attach a copy of the spam email to this email and send it. If we do not receive a copy of the email as an attachment our ability to take action against spamming account is struck.

    * We request a full copy of the email so that we have conclusive evidence showing what Windows Live Hotmail account, SPAM was sent. It is possible that the email address has been tampered with, and we are not wrong to close a non-spam account.

    To report abuse:

    Customers who wish to report abuse on impersonation, harassment, exploitation of children, pornography etc., coming from a Windows Live Hotmail account to send its complaint to * address email is removed from the privacy * with all the corresponding information.

    * If you are threatened, call your local law enforcement.

    * If you would like to report abuse on a non Windows Live Hotmail account, please send the complaint to * address email is removed from the privacy *, where xxxxxx.com is the text that appears after the "@" symbol in the e-mail address of the sender. For example, if the unwanted emails came * address email is removed from the privacy * then report the e-mail message to * address email is removed from the privacy *. You can also use the http://abuse.net site to identify the correct abuse statement.

    * In addition to these means of Spam reports, you can also click "report as Spam," button in your e-mail program.

  • ProxyServer registry settings

    Hi, I had problems with a slow connection to websites.  I managed to fix it by unchecking "Enable Proxy" by setting these files using regedit.

    HKEY_CURRENT_USER/Software/Microsoft/Windows/Internet/ProxyEnable settings
    HKEY_CURRENT_USER/Software/Microsoft/Windows/Internet/ProxySetter settings
    However, the parameters keep returning.  They always go back to logon, and sometimes they come back by themselves.  I tried to delete the ProxyServer file but it keeps returning.  Clearly some script or application does.  How?
    The problem started for a long time when I was infected by a virus.  I deleted the executable, but clearly something continues to be wrong.

    OK, the scanner picked up a very bad Trojan horse called cycbot who lives in dwm.exe.  Now, it has been removed the problem seems to be recurring.  So thank you for this piece of useful information.  When I googled the problem apparently many other people suffer from this, so I hope that this forum is also useful for them.  (And possibly warns of danger of mucking around with the registry, too).

  • Antivirus keeps freezing of the OS until it finishes the scan

    I have a Compaq Presario C751NR Notebook and the antivirus keeps freezing of the Vista x 86 operating system and finally it goes to the blue screen. This happens whenever the antivirus analysis reached this path or string.

    c:\windows\winsxs\x86_microsoft-Windows-p... structure.resources_31bf3856ad364e35_6.0.6000.16386_en_us_62e599a3b... \peri.dat

    I tried to flush caches of Temp and Java. I did a sfc scan and the cleaner.and registry CCcleaner that he always keeps freezing upwards. Only, it freezes when I run the antivirus. I ran three different types of antivirus and all three antivirus programs freeze the OS every time to the path or string.

    c:\windows\winsxs\x86_microsoft-Windows-p... structure.resources_31bf3856ad364e35_6.0.6000.16386_en_us_62e599a3b... \peri.dat.

    In addition, earlier, I had a nasty Trojan horse called Trojan.Agent/Gen-FraudPack, which I got rid of by safe mode and running the antivirus. Around the same time, Vista did an update of windows, and I'm afraid that if I do a system restore I will reintroduce the nasty Trojan.Agent/Gen-FraudPack. I don't know what else to do. Help, please! Thank you

    Sorry, I took a lot of time answering but I just reinstall the operating system. I accidentally started reformatting install my OS while looking for the check disk on the recovery disk and it erased my Boot Manager and I was force to a cleaning.  Sorry about that

  • Invalid product key Vista

    Hello, I recently bought a laptop Acer 5536 G that came pre-installed with Vista, and not a windows installation CD.

    My laptop has been formatted with a Windows Vista DVD and I'm unable to activate with the product key provided with the laptop. After Google search, it is my understanding that a preinstalled OS CD key will not save a DVD Version?

    So any advice or help fixing this issue would be very useful, I'm unable to call Microsoft, due to not having a landline, so if I have to contact them is an email address? I was unable to find anything to use to communicate with them by e-mail.

    Your laptop may have a recovery partition (if it wasn't delete when you have formatted the drive using the Vista DVD). Check the instructions on what F key, you will need to press on (example: Ctrl + F11) during the initial startup process.

    Also contact Acer support: http://www.acersupport.com/ for help and also to ask questions about the availability of the recovery media.

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

Maybe you are looking for

  • CDAQ 9201 noise compared to PCI-6120

    Hello I haveproblem with our cDAQ, more precisely with the 9201 tension module. Thesignal resulting seems much too noisy, especially compared to our 6120.Could someone take a look at it and tell me if this is the desired result. I measuredthree thing

  • How do I detect when a write of correlated digital output is completed

    Hi LabGurus I'm trying to synthesize a SPI signal on the output lines digital stamped usin a M - Series USB Daq (6225, 6229). I wrote most of the code and have developed the following problems: When I use 'finished samples' to the clock mode, the wav

  • Center of mass

    Hello This is a picture taken by a camera. How to automatically find the coordinates of the center of mass of my character which is actually a kind of dumbbell. I would use the fact that my barbell has a balanced image. Can someone help me with a sim

  • Too long and too big display settings, can not reset!

    I tried to do the CIO more then my husband could better see the screen, but now everything is elongated and too big! When I go to display settings, I can't reset because the 'Apply' button is off the screen and I can't click on it! Help!

  • Display and sum numbers

    Hi, I am a new developer and try to learn the native sdk. I tried several times, but don't know how I can add 2 numbers and display, don't have an option convert or number type just the text. I want to receive 2 issues (in diferent textfield) and dis