troobles with creation Station

Similar Questions

• Tecra M5: Double monitors with docking station?

  Hello

  I have a Tecra M5 with docking station, in the past with other laptops, I was able to hook up a monitor by using the analog port and the other with digital and used both with the screen down.

  This seems not possible on this new, I have options to perform a monitor with the laptop or with a TV screen, but not two monitors to separate whole.

  Everyone was able to get this to work if so how? Graphix is the NVIDIA Quadro NVS btw.

  Thank you

  Hello

  It is very interesting, but all I know is not possible. I'm not sure at 100%, but for something like that you need a special graphics card that supports something like that.

  The same situation is with my Tecra. But the idea with two external displays is not bad. :)

• The microprocessor as fast and compatible with creation software market who?

  Hello. I use Adobe first CC. I did a video processing that can exceed 5 hours. The rendering of my computer time is too long. 4790 3.6 GHz i7 processor has 8 MB Intel on my computer. I want to buy a new CPU on my computer better. The microprocessor as fast and compatible with creation software market who? Make the rate for which you propose to first CC processor.

  Exon processors so unfortunately I do not have a budget.
  Intel Core i7 Extreme Edition 3.0 GHz 20 MB Cache LGA 2011 v3 5960 X
  X 99-DELUXE ASUS / Intel U3.1 X 99-3200 Mhz (OCR) DDR4 Socket 2011-V3
  Kingston HyperX 3000 mhz Savage 8 GB DDR4 RAM x 4 = 32 GB

  Samsung 950 Pro 512GB 2500 to 1500 MB/s m2, SSD PCI-E 3.0 MZ-V5P512BW

  Archive of Seagate 8TB 3.5 "5900 RPM Sata 3.0 drive Sabit ST8000AS0002

  You can meet them in the budget. Is this system enough? Exon a passage or I?

  It is a system which may constitute the budget better than this system

  Thank you very much for your help

• Recovery CD Sony Vaio Z 2012 with Docking Station

  Hello

  I try to use my recovery CD on my Sony Vaio Z with docking station.  VAIO Care says if I want to perform a full recovery, I need to restart the system.  I restart, nothing happens.  How should I proceed?

  Hello USER 975909.

  Be sure to start at the bios and set the boot on external usb first priority and try again.

  Nick-

• What is the right way to extend a network with two stations 80211ac wireless fixed extreme apple via ethernet?

  I my house wired with ethernet and have logged as many devices via cat5e as possible. My problem is when I try to connect together the two apple airport extreme base stations and use the second to extend my network I lose the internet connection.  I am able to extend without problems via radio, but since I plugged in the House tried to take advantage of the fastest method by cable.

  Here's my network setup in a nut shell.

  In the basement, I have my router from Verizon Fios (gateway 80211n) currently configured to provide all the space an Ip address via dhcp (disabled wireless)

  Gigabit ethernet port 8 wired via gigabit switch through the cable between the bridge Fios and port 1 of the switch.

  two iMacs wired directly the fios gateway ports 2 and 3

  Base station extreme elementary apple (call it down at the moment) connected to the Fios bridge

  Extreme basestation secondary apple related to extreme primary apple base station

  Cable to switch TV

  Nintendo Wii connected to the switch U

  Apple TV connected to the switch

  Drive Blu - ray connected to the switch

  My mainly the Airport extreme is configured as follows

  connect via DHCP

  Address of the router is set to the Fios router

  FOR DNS, I used back free servers like Google, and level 3

  Wireless is set to create a wireless network

  Security is set to WPA2 Personal

  Turned on 5 GHz and 2.4 and 5 ghz are set to automatic

  Router mode is set to bridge mode off

  Second or first floor Airport extreme config

  Connect using dhcp

  Address of the router is also the Fios router

  Servers DNS is empty

  Wireless settings

  Network is set to extend a wireless network

  the wireless network name reflects my network

  wpa2 personal wireless security game

  Network

  Router mode is grayed out and pondered or bridge mode

  Second or first floor Airport extreme config...

  .. . Network is set to extend a wireless network

  Given that all routers are interconnected by Ethernet, you don't want to configure AirPort Extreme to "Extend a wireless network." This option should be used only if the connection between the wireless base stations. Instead, the two base stations must be configured to "create a wireless network.  This is because that, with them all connected by Ethernet, you have the basis for a network of mobile type.

  With this type of network, each router will broadcast their own Wi - Fi network, but because they will all use the same network name (SSID) and use the same type of wireless security and the password, all the wireless clients will see them as network «one»

• External monitor like main screen for M200 with docking station

  Hi all

  I have a Tablet M200 with GeForce FX go 5200. I have a Toshiba docking station and an external LCD display. When it is docked, I would use the external LCD as main display and the LCD builtin as the secondary display. (I want the taskbar, icons and newly opened windows on the external screen when it is docked.)

  Unfortunately, I can't find the right combination of settings of this. If I put Windows to extend the desktop on the external screen, "use it as primary display" option is grayed out. I don't get the span horizontally or vertically options in the nView utility, just the Standard and the Clone (and this only if I do not extend to the office.)

  How can I get the external screen be the main while being the internal school?

  Thanks in advance!
  Kind regards

  Levente

  Hello
  What home-unit station use?

  Tablet Multi dock PA3315E-1PRP or Port Replicator advanced III: PA3314E?

  thx for the info,

  Good bye

• Tecra M9 - save the settings of display with docking station

  Hey there.

  I have a user who has a Tecra M9 on a docking station.
  There are 2 monitors connected to the docking station with VGA, the other with DVI. I use the Nvidia Control Panel and configure the screens and all is good in the world.
  That is until the user off the laptop, some work at home, then puts the laptop in.

  Therefore, only one monitor works, with the second out of action.
  I can go back and reset the configuration, but the user does not want that to happen every day.

  Any suggestions on how to get the laptop to save your setting as the case not docked or anchored?

  Thank you!

  > That is, until the user off the laptop, work at home, then puts the laptop in.
  Do you know what the user did in the past?
  To my knowledge there is not any special options that could save it. If you click on the button (apply) the changes are made and recorded.

• Tecra M9-104 with docking station - DVI resolution

  I wonder if anyone can help. I have a Tecra M9 - 104 running Windows XP. I also have the docking station to go with it. The great thing about the docking station, it's that it can out to two screens as the port on my M5 Replicator could not do.

  I bought two identical external screens that have a native resolution of 1440 x 900. I went into the Nvidia display configuration and set up to display both (one is plugged in VGA and one DVI port). However, the display on the DVI monitor is wrong. After further investigation I woke up the menu of the monitor on the screen to see that the resolution actually be issued is 1280 X 1024, despite Nvidia screen saying 1440 x 900 has been the output. Whatever I do, I can't increase the resolution on DVI port.

  The only thing I could find on Google and these support forums is that the maximum resolution on the DVI port on a port replicator is 1280 x 1024, but it was for the M1 and M2 series. This laptop is the last series and as such, I expected that the spec had been updated at this time.

  Someone at - it ideas?

  Could be due to a limitation of the video driver on the laptop, or you can try to download a utility that requires to use a different resolution, its called Powerstrip (do not have a download link sorry).

  Be careful with it though, you can mess up your video driver

• Portege R700 with docking station may not automatically switch to the external display

  Hello!

  In the past, we bought a lot of A600, R500, S10, and always a docking station for every laptop here at Desjardins, we bought.

  Now we have a little problem with the new R700 model: PT318C - 00G 001,
  We bought 30 of them.

  WHY when we put in the tie-down (with the nearby screen) it can display automatically to the external display no/switch? (in this case a 22inc LCD)
  It is connect with the HDMI/DVI cable. And when we get the display by sliding in the graph of intel and media panel (V 6.14.10.5258), after a reboot of the docking, the screen is all buzzy... sometimes both screen are dark, and we must use a combination of keys to move.
  It's really not easy to use for our users...

  With the old model as the A600 or S10, all have always worked well, if we are on the dock, the pop screen directly on the external LCD, so I stopped him, ondock it and start up of all is well on the screen of the laptop.

  We are on Windows XP Pro SP3.

  I tried the utility Toshiba display device change and expansion Mobile from Toshiba. are not clear...

  Thanks for your help.

  Have you installed a version of vanilla from Windows? Or XP has been installed from the Toshiba Recovery Disc?
  Maybe you are missing several key structural factors (common modules for example). Also make sure that you use the drivers to display on the Toshiba site.

  Also try a BIOS update (v1.70 is the last one I think).

• Android tablet with docking station: table of the emoticons are not more

  Skype for Android: since the last updated version, I can't view the emoticons for IM table. I use an Asus Android tablet placed on a docking station (external keyboard). When I click on the smiley face in the message new message, nothing happens. When I "right click" on the same smiley, it replaces a keyboard symbol. But no emoticon upward shwing.

  When I disconnect the Tablet from its docking station, no problem, it behaves as it should.

  Could you please solve this problem with the use of the docking station (external physical keyboard)?

  Thanks a lot beforehand.

  I did the same thing, and it works for me too!

  Thank you very much Alexnik! Great customer service.

• Portege M200 - weird display with docking station problem

  Hello

  I use a Portege M200 with MS Windows Vista and the Toshiba docking station. Whenever I connected the system closed down it will start with low light and different screen resolution. The brightness can then be adjusted in Vista.

  To solve the problem, I have to disconnect it, then put it in PC Mode and finally stop Vista. With the next offline boot, it works correctly and can be re-docked. Maybe it's just a lack of understanding of the system? It seems that with a rooted boot, nVidia somehow takes place or is there different profiles?

  Thank you!

  Alexander

  Hello

  At first, I must say that Portege M200 is old enough laptop model and I really wonder that Toshiba supports this model of laptop for Windows Vista. You are really lucky in this regard.

  In any case very important is info which edition of WXP Tablet Toshiba offered tools for/disconnect. If I remember well, it was utilitarian Toshiba Mobile Extension. Using this tool you has been able to use different settings for Bay service as well as for output screen to choose the correct resolution.

  Under Vista it is controlled by Vista and, AFAIK, Toshiba does not have any special utility for this. You must also understand that procedure/disconnect (power switching power supply) is controlled by Vista and I can imagine that under Vista it does not work perfectly.

  My opinion is that there is not much to do, but I hope I'm wrong on this issue. Let's see what else users of forum about this.

• Tecra 9100: Installation of the printer with docking station connected

  I have a Tecra 9100 with a docking station that run under WIN - XP SP1. Trying to install my printer, an Epson 740 with USB connection, I found that I need to create 2 entries for the same printer, 1 environmental off-STATION and 1 for MOORING environment, known as the XXX (1 copy). Is this normal or have I done something wrong.

  This is different from my old Portege that keeps the 2 hardware profiles, 1 connected uindocked and 1, and there is only 1 entry in the Printers folder.

  Also, if I unplugged the printer from the docking station and later taking again on another USB port,
  He will ask reinstall me the printer again.

  Thanks for any comments from anyone.

  I have Tecra M1 and use it on the same port replicator as you have your 9100. The same happen to me if I want to use the webcam on different USB ports. Use it on the same there is no message but using the second port he asks the driver.

  It seems to be normal. :)

• Sony Vaio Z - improved performance with docking station

  Hello

  I recently bought the sony vaio z at the station and noticed the graphics performance decreases when the docking station is attached. The Windows experience index - I have a rating of 6.5 for the graphics when using the integrated graphics card Intel 4000 and a 6.0 with the graphics card ATI 7000series. Is this good? Is there a setting I should change to fix this? I think that the ATI graphics card is better than the integrated Intel graphics card.

  Thank you.

  Hello

  I recently bought the sony vaio z at the station and noticed the graphics performance decreases when the docking station is attached. The Windows experience index - I have a rating of 6.5 for the graphics when using the integrated graphics card Intel 4000 and a 6.0 with the graphics card ATI 7000series. Is this good? Is there a setting I should change to fix this? I think that the ATI graphics card is better than the integrated Intel graphics card.

  Thank you.

• I mixed adapter for Satellite U400 with Docking Station adapter

  I have a satellite U400 laptop and a USB-Docking-Station dynadock.
  The Docking Station has a power supply of 5V and the laptop has a power supply 19V, but the connector are excatly the same thing.

  Unfortunately I mixed the two connectors.
  The result was a big bang and the Docking Station black smoke. It also kills the keyboard and mouse wireless receiver.

  Thanks Toshiba :(

  I totally agree with the previous user
  You used the wrong AC adapter it is a mistake to Toshiba?

  The example posted by Boarder says it all

  Who is responsible for the error if you would feed a bad fuel; your or the manufacture of the car?
  I think that it s even with your laptop before you plug in and plug whatever it is you laptop you must make sure that it is a right and support for the party.

  That s my personal opinion

• Tecra A10 - change of resolution with Docking Station problem

  Hello

  I own a Tecra A10 - 14Q and I like it a lot - it is a very beautiful piece of hardware, including the functionality of UMTS.

  When the Tecra is moored to the dock Express, and the external monitor (Samsung SyncMaster 22 "with resolution 1600 * 1200) is on defining the Office to be cloned on both screens, passes resolution of 1280 * 800 on the Tecra to 800 * 600 as"best resolution.

  I tried Intel and Mobility Center graphics settings, but I can't find a way to set I want to keep the resolution 1280 * 800.

  Suspicion to do so automatically is welcome. I found that a program that now lies on my desk that I run so it redefines the resolution to 1280 * 800, but I would like to stress that resolution remains just that it is.

  Kind regards

  YaGru

  Hello

  It's not easy to say why the resolution automatically decreases

  But sometimes, if the external monitor would be connected to the Tecra A10 directly without using the Express Docking Station?

  Otherwise the problem could be linked to the dock Express (Replicator of port express?)

  Maybe the 1600 * 1200 resolution on external monitor is too high for the express port replicator and so there are some questions which s my personal suggestion