trouble with power off

Similar Questions

• Bug: iOS 10, Siri invades even lock screen with power off

  iOS 10, Siri invades even lock screen with power off

  Since the upgrade to iOS 10 (iPhone 5 s) siri appears when I forgetting to unlock my phone because I'm not used to this way to unlock yet. But siri on lock screen is disabled in the settings. I can close siri all together, but I don't consider it as an option.

  Is this a bug in the iOS 10 or did I miss something?

  Hello nick_ve,

  Thank you for using communities of Apple Support.

  I see that since you have upgraded to iOS 10, Siri starts each time you try to unlock your iPhone and Siri on the lock screen is disabled in the settings. I completely understand, because when I upgraded, it took me a few tries to get adjusted to unlock with the Home key. I'm more than happy to help you with this.

  Press the Home button on your iPhone 5s once unlocks the screen, and freezes for more than one second will activate Siri. It is good to keep this in mind when you unlock your iPhone.

  There is also an alternative solution I would like to share with you. You can disable this option in settings > general > accessibility > Home button. Turn the finger remains open. You can unlock the iPhone with Touch ID without having to press the Home button.

  Have a wonderful day!

• Computer has a black screen with a message "power off, then reinstall the jumper in normal mode position."

  Original title: black screen?

  My computer has a black screen with: turn off power and reinstall the jumper in normal mode position? Help!

  Hi Miguel C.
   
  a. What is the brand of your computer?
   
  b. do you remember of any changes to your machine before the question?
   
  I don't know what motherboard you have, but some is shipped with the 'Clear CMOS' jumper in the position unequivocally. Check the manual of your motherboard for this rider and make sure that it is in the normal position.
   
  J7B1 computer configuration jumper block requires a single rider set the configuration of the BIOS Setup utility. This allows the configuration in the configuration utility BIOS, including the frequency of bus and the processor motherboard speed.
   
  Note: Do not move this jumper with the computer turned on.
  
  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
   
  I think, you'd be best to contact the manufacturer of the motherboard as this seems to be a motherboard problem.
   
  Aziz Nadeem - Microsoft Support
   

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Sudden power off of the show on X 220 Tablet with accumulator

  We discovered this problem in early August with our new X 220 tablets.  We have a 1 to 1 tablet pc program.  About 75% of our first grade class has experienced this problem.  The tablets are running on battery power with its long battery life.  Units spontaneously just will be turn off.  Not a clean shutdown but just a power off.  The batteries are in different States, when this happens, most of the time that both batteries are almost full.  I've seen this dozens of times with the students in my classes.  We discovered that it also affects another high school on our consortium.  Bulk buy our tablets with several other secondary schools.  Another school that has this problem has the same model and the manufacturer even date 11/06/2012.  It is estimated that 200 to 300 units are allocated between the two schools.  Lenovo product engineers work on the search for the source of the problem, but we have many frustrated students and parents.  Just curious if anyone else has experienced this problem with X 220 tablets and slices that were made around the first part of June?

  
  

• Power off SX20 with tactility and touchscreen

  Hello

  is it posible to power off of the SX20 codec through the touch screen? I just saw the option pending, but I can't find how to turn off the power.

  Furthermore, how can I set the sensitivity of the touch?, now when the codec is the sleep option, when someone is near the touch screen of this change online without touching.

  concerning

  Hi Filiberto,

  No, the SX20 cannot be turned off through the touch screen.

  You can reduce the sensitivity of the touch by turning on the resilience of the EMC mode.  To do, look on the Touch under settings, administrator (and connect), EMC resilience and set on IT.

  Note: Your question might be better placed in the section of forums where these devices are more actively discussed as in the section on IP Video telepresence , you posted in-I would say, if the above has not answered your query, you move your discussion there.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions?

  Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions? I have tried almost everything turn power switch wifi in the middle and doing it to try to track down the problem in the Device Manager and im completely disgusted

  Have you tried turning off and back on again?

• unmatched iwatch of iphone and incorrect password (power off) gray of iwatch

  My iwatch is locked and it is showing the error "wrong access code open the Apple Watch app on your iphone, go to access code, then tap reactivate entry password to try again. I tried the hard reset, but it did not work. I can't reset the iPhone because it is non-matched and when I tried to reset to iwatch again then power off and power reserve options are grayed out.

  Can someone help me please?

  Hello

  Follow these steps to clear your locked Watch:

  • Connect your watch to its charging cable - with power connected.
  • Hold down the side button until you see the cursor off the power.
  • Press firmly (IE more firmly than usual) on Power Off and then press erase content and settings.

  Then re-pair shows your watch by using the app on your iPhone, choose to restore from backup when the possibility.

  More information:

  Set up your Apple Watch - Apple Support

  If you have forgotten the password for your Apple Watch - Apple Support

• HP Color LaserJet M277dw MFP: Disable auto power off after inactivity for HP Color LaserJet M277dw MFP

  What is the purpose of mobile printing solutions if you cannot activate your home printer?
  My printer stop automatically after 8 hours of inactivity and therefore makes it impossible for me to use mobile printing. The printer is connected via WLAN (without active ports to stop the closing).
  In the configuration, there are only options to stop after 2, 4 or 8 hours. No option on disabling of automatic shutdown.
  Pls do that for the people who work on the firmware updates, they must include an option to disable auto power off, many people are already complaining that and nothing has changed so far.
  Its just illogical. You make big announcements for HP eprint and other stuff, but your printers are not able to do so even if you could theoretically make eprint if your standing next to your printer all day.
  I just got this printer pluged and installed and already tired of this BS!
  I know that there is no solution, so just send it to the people who can change it.

  for all of you who read this post, I was in contact with the technical team of HP and they said that they don't give you the ability to disable auto power off on purpose, it is HPs energy-economy-policy to do and there are no plans to change this in the future
  in my case, I only WLAN's, yet is not automatically stop (although it should be), I guess I'm lucky that my router it ping every now and then and is therefore not stop
  If you can't fix it yourself with active ports and may not have at all, it will probably not option left than the back of the printer

• Unusually slow MacBook pro, as well as problems with power.

  I'm looking for help on setting my Mac, any help from anyone would be great!

  Recently, my MacBook Pro (running El Capitan) at the end of 2013 model started running really slow unawares (before that it was perfect). No hardware or software, changes began to really randomly goes slowly. My mac has always very well maintained, regular clean ups of junk, utility to check disk done often, no useless apps or data.

  Other questions, I'll have with power up the mac off is when I press the power button to turn off it starts then a few turns (don't not even to Apple to loading off-screen, shines the screen but then powers), I have to hold the power button for 10 seconds approximately to get power properly, when I close the lid without turning off then open it I went to the login screen instantly but then close the book Mac downs completely.

  I ran the Apple Diagnostics, no problem. I also ran repair disk utility, no change. I even did a clean install of the operating system and there was a very minor change, but always far make the level it's at.

  Thank you

  A slow Mac may be due to not enough available storage space.

  Click on your Apple  menu at the top left of your screen.

  In the menu drop down click on about this Mac , and then select the storage tab.

  Your Mac is the bare minimum needs 8 GB of storage available just for the operating system not to mention all your personal data.

• Is it possible to stop auto power off while downloading?

  Is it possible to stop auto power off while downloading?

  Can you please be more specific with your problem?
  What model of laptop do you have?

  What happens exactly and when?

• Pavilion 15: Power off

  I have to use the shift with off switch key (on windows 8) to power the laptop off, if I use only only its turning off the display only, but is always cut power off button.

  Hello

  Try disabling the hybrid Windows 8 start - you can do the following.

  Right-click the battery icon, and select Power Options.  In the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close all open windows and check if the laptop will now be shut down properly.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K

• 1950-801D satellite does not or sudden power off light

  Hello

  My laptop is running or when it does it turns off suddenly without any warning.
  The power light is on, but the battery doesn't seem to be loading.

  I can't think that it's the battery that is the cause because power should keep the laptop or allow it to boot? Any suggestions?
  One person suggested a possible motherboard and someone else suggested a charging problem?

  Help!

  Stand by. What happens when you remove the battery and start computer laptop with power only? You can use Notepad as usual?

• Please explain power off icons

  On a 10 B8000 Yoga, when I choose to turn it off, I get a window which displays three lines:

  > Power off

  > Airplane mode

  and the third line has 4 icons:

  > a speaker with an X.

  > a tablet with two wavy lines,.

  > a speaker with two concentric arcs.

  > and two trees.

  I think that I understand the first 3, but what the heck are the two trees for?

  I tried to select and cannot tell any difference in the operation of my tablet.

  (Btw, I called Lenovo support with this question THREE TIMES and after speaking to FOUR rehearsals and lots and lots of waiting time, nobody knows the answer, most don't know what screen I hate...)

  exilio wrote:

  On a 10 B8000 Yoga, when I choose to turn it off, I get a window which displays three lines:

  > Power off

  > Airplane mode

  and the third line has 4 icons:

  > a speaker with an X.

  > a tablet with two wavy lines,.

  > a speaker with two concentric arcs.

  > and two trees.

  I think that I understand the first 3, but what the heck are the two trees for?

  I tried to select and cannot tell any difference in the operation of my tablet.

  The speaker with the mutes the audio with vibrate mode off X.

  The tablet with two wavy lines on mute, but turn on vibrate mode.

  The pregnant with two arcs UN-mutes the audio and turns off vibrate mode.

  I don't know what the "two trees" icon is.

• 4 IPad keeps going to power off of the screen, the screen is cracked but do not know if I need to replace the screen button or power?

  4 IPad keeps going to power off of the screen, the screen is cracked but do not know if I need to replace the screen button or power?

  Press the sleep/wake and Home buttons and hold for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• My computer is stuck on the 3/3 update, and even if I force power off and restart, that just guard on that happening. What can I do?

  I run windows vista on my pc, and every time that I turn it on, it just sits on the 3/3 update and will not progress. Even when I force my PC to power off and restart it, it continues to be. The first time he tried this update, I have dropped about 3 hours and returned to the configuration to update: stage 3 of 3-0% screen. Since it always happens. My pc is unusable because of this. What can I do?

  .. .my computer came pre-installed with vista, so I do not have a disk

  Not that I recommend a repair install, but the manufacturer was required to provide a way to reinstall Windows. If the computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to reinstall Vista.

  Assuming that Vista SP2 is not installed, I recommend you open a free support incident, NIC. See the link in my previous answer. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft