True compass indicator

Similar Questions

• How can I use the Module Robotics compass indicator?

  I need to use the Module Robotics compass indicator.

  I would like to know how to pass a value to him? What is the scope?

  Thanks in advance

  Guilherme

  It is a digital indicator, where the entrance is in degrees.  0 degrees is North, 90 is East, 180-South, etc.

  

• Show largest index in the array with the value 'True '.

  Hello

  Is it possible to show the maximum number of index with the value "true", as indicated under?

  I can show the value on what index series of 'real' ends with the function 'Table Max and Min', but when there
  a fake between these True, it shows that the index of the true left of the fake.

  I don't need to know the size of the table, because he must stay 8

  

  File is attached

  Hi Stef,

  Here you go:

  

• question about ownership of Val (Sgnl)

  Hello

  I read data from a connection telnet as a 16-bit binary values.  I strip the individual bits of that word of 16 bits in the light of the indicators.  For each indicator is turned on, I want to have a 'historic' associated indicator, which shows if it lights up, then went dark at some point (as a test).

  To do this, when I assign a value to a given indicator, I send this same value Val (women) of the indicator property.  Then I have a structure of the event which simply defines the true 'history indicator' whenever there is a change of value in the Val field (Windows).

  OK so my problem is that I can't be understand what constitutes a change in the value, because that what is happening, is that when there is an error on any indicator, ALL history indicators are lighting up.  The VI is vast and complex, to remedy that I've attached a picture that shows the important parts.  Notice on the left I have hide individual bits, and then on the right, is when I turn on the indicator based on the property Value Change.  I only mentioned here because they are discreet, but the code is identical... If the respective error bit changes value (low to high or high to low), then the light of history.

  So for example... If G_LOL somm goes active, the bits of history for all 5 indicators goes active.

  I put sensors on the signals I don't expect to light (e.g. probe #18 at the bottom of the picture to the left)... remains 'false' all the time (i.e. the value doesn't change), but it is seeing history turns.

  Any thoughts?  Thank you

  
  

• How to change and maintain power

  Hello
  I spend in 'true' an indicator using an OK botton. I want that when I press the botton for the first time my indicator is set to 'true' and remain 'true' forever, regardless of the status of OK botton... How can I do?

  Thanks in advance

  GM

  Try, for example, this recent post.

  

• How can I reset the time

  Hello

  The function of the program was to indicate the elapsed time. When the program has been run and the switch set to true, the indicator showed the elapsed time. And then move the button to false, the stop indicator to indicate the elapsed time. How can I reset the time elapsed to indicate the time elapsed since 0 when the button switch again without pressing the button "stop"? The program is attached. Thank you.

  From your description, it seems that your code is way too complex. -What are you really trying to do?

  

• Walk back/import a table in ODI

  Hi all

  I want to reverse an EBS 12.1.1 table database. My setting is:

  Boning: custom

  Context: Global

  Agent logic: Local (agentless)

  Knowledge module: Suite RKM EBS

  Option:

  -Use the mask: false

  -List_of_table: gl_item_cst

  Model of Oracle E-Business Suite R12.1.1-> click the boning. My session completed without error, but gl_item_cst of the table does not appear in Oracle E-Business Suite R12.1.1 model.

  Please help me solve this problem. Thank you.

  Kind regards

  Cong

  Based on feedback from the team of DEV of Oracle
  ======================
   
  We have a restriction on the use of the RKM with only Studio (No Local Agent). This
  Cannot be run on an agent. So please use Studio (No Local Agent) when running RKM.
   
  We already have the documented in the RKM Description:
   
  Current RKM description is:
   
  COMPONENT NAME: RKM BIApps E-Business Suite
  THE COMPONENT VERSION: 1.0.0.0
  AUTHOR: Oracle
  COMPATIBILITY: 11.1.1.7
   
  DESCRIPTION:
  -Reverse Engineering Knowledge Module
  -RKM for the EBS metadata
   
  REQUIREMENTS
  N/A
   
  BASIC CONFIGURATION
  N/A
   
  OPTIONS (see the description of the options for more information on each option)
  -ADD_SDS_SUPPORT (default: false): information (such as the columns of the CDC) CDC adds during the process of reverse engineering to support SDS
  -USE_MASK (default: true): use the TABLE_MASK option to determine the list of tables to deal with, otherwise, use the option of LIST_OF_TABLES separated by commas
  -TABLE_MASK (default: %): use a mask of table to determine the tables to deal with
  -LIST_OF_TABLES (default: null): allows to determine the tables to process a list separated by commas
  -ONLY_PROCESS_EXISTING_TABLES (default: true): this indicator determines
  If the reverse engineering process will go through all the tables (if set to false) or only the tables that already exist within the model (if set to true
   
  LIMITS
  -Cannot be run on an agent. Must be run on the Studio

  =>
  I found the cause. This input parameter works for me.
   
  -USE_MASK: false
  -TABLE_MASK (default: %)
  -LIST_OF_TABLES: "GL_ITEM_CST" ("gl_item_cst" and "GL_ITEM_CST" are different)
  -ONLY_PROCESS_EXISTING_TABLES: false (the previous value is "true")

  Kind regards

  Cong

• How to display a ToolTip for a selectBooleanCheckbox in readonly mode?

  Hello
  
  I have a selectBooleanCheckbox which the readOnly attribute is set to true when other things are not configured. In this case, I want to inform the user with a ToolTip, it places the mouse on the box, that X is the reason it is disabled. How do I do that?
  
  Thanks in advance
  Sanogo

  Hello sandrine,.

  a possible solution is to use changed and changedDesc properties.
  When you set readOnly to true, set also passed to true - modified indicator will be rendered and hovering on it displayed the text in changedDesc - may be applicable to your use case

  Kind regards

  Branislav

• converting as3 in as3

  Can u please convert as3 in as3

  Code here:

  const DEFAULT_VOLUME:Number = 0.6;

  var intLastVolume:Number = DEFAULT_VOLUME;

  VolumContrl.btnMute.addEventListener (MouseEvent.CLICK, muteClicked);

  VolumContrl.btnUnmute.addEventListener (MouseEvent.CLICK, unmuteClicked);

  VolumContrl.mcVolumeScrubber.btnVolumeScrubber.addEventListener (MouseEvent.MOUSE_DOWN, volumeScrubberClicked);

  VolumContrl.mcVolumeScrubber.x = (52 * DEFAULT_VOLUME) + 341;

  VolumContrl.mcVolumeFill.mcFillRed.width is VolumContrl.mcVolumeScrubber.x - 394 + 52.;

  setVolume (DEFAULT_VOLUME);

  function muteClicked(e:MouseEvent):void {}

  setVolume (0);

  Update scrubber and fill position/width

  VolumContrl.mcVolumeScrubber.x = 341;

  VolumContrl.mcVolumeFill.mcFillRed.width = 1;

  }

  function unmuteClicked(e:MouseEvent):void {}

  Set the volume to the last used value

  setVolume (intLastVolume);

  Update scrubber and fill position/width

  VolumContrl.mcVolumeScrubber.x = (53 * intLastVolume) + 341;

  VolumContrl.mcVolumeFill.mcFillRed.width is VolumContrl.mcVolumeScrubber.x - 394 + 53;.

  }

  function volumeScrubberClicked(e:MouseEvent):void {}

  scrub the value true volume indicator

  bolVolumeScrub = true;

  begin to slide

  VolumContrl.mcVolumeScrubber.startDrag (false, new Rectangle (341, 19, 53, 0));

  }

  function mouseReleased(e:MouseEvent):void {}

  bolVolumeScrub = false;

  bolProgressScrub = false;

  stop all dragging actions

  VolumContrl.mcVolumeScrubber.stopDrag ();

  update of the progress/volume fill

  VolumContrl.mcVolumeFill.mcFillRed.width is VolumContrl.mcVolumeScrubber.x - 394 + 53;.

  record the volume if it is greater than zero

  If ((VolumContrl.mcVolumeScrubber.x-341) / 53 > 0)

  intLastVolume = (VolumContrl.mcVolumeScrubber.x - 341) / 53;

  }

  function updateDisplay(e:TimerEvent):void {}

  {if (bolVolumeScrub)}

  setVolume ((VolumContrl.mcVolumeScrubber.x-341) / 53);

  VolumContrl.mcVolumeFill.mcFillRed.width is VolumContrl.mcVolumeScrubber.x - 394 + 53;.

  }

  function setVolume(intVolume:Number_=_0):void {}

  create the object soundtransform with the volume of

  the parameter

  var sndTransform = new SoundTransform (intVolume);

  Assign the object to the NetStream audio processing

  nsStream.soundTransform = sndTransform;

  mask/poster button mute and reactivate according to the

  volume

  If (intVolume > 0) {}

  VolumContrl.btnMute.visible = true;

  VolumContrl.btnUnmute.visible = false;

  } else {}

  VolumContrl.btnMute.visible = false;

  VolumContrl.btnUnmute.visible = true;

  }

  }

  Ask someone to do it for you, it is a bit much, especially when many changes are at the base. You must convert as much of it as you can first, then ask for help with the rest.  x, y, width, height (jn AS3) become FLF _x, _visible, _width, _height (in AS2)

  If you are looking for the AS2 startDrag method you should be able to deternmine how to change that.

  Since it is more a question of AS2, and only people looking for help with AS2 would be likely to find it useful, you should post in AS1/2 forums instead of here.

• unique field against db validation

  I want one field to be validated at the same time. As I have a few form fields and the first field I want to validate:
  
  "" < af:inputText label = "" User ID: "value =" #{nodeFlowBean.nodeVo.externalNodeId} "columns ="75"required ="true"readOnly =" #{nodeFlowBean.recordReadOnly} ' validator = "#{nodeFlowBean.validateUserId}" autoSubmit = "true" / >
  
  So I put a validator and autosubmit = true as indicated above. All form fields are required. Now when I tab on the first field that precedes the field validation is done properly, but with some error messages for this field; other areas also are validated and error messages shown for each of them. Is not what is expected. If a user fills in the first field and it is not valid messages should be displayed for the first field only, and not for fields that have not yet received any discussion.
  
  Has anyone else faced with this and found a solution?
  
  Then I check valueChangeListner now.

  I wouldn't say using DWR in this case - try to use the building in support of ADF Faces, as I mentioned earlier, with the immediate property.

• WebLogic 10.0MP1 mBean managed Server restart required?

  Is there somewhere an mBean that is true with indicator (or similar) when a change is made in the console (or through WLST) which requires a restart? I have searched the tree via WLST in my field and can't seem to find anything that gives me these data. I'm thinking there must be something since when an attribute such as "Turn the logfile at startup" is changed, restart is required and is stated as such in the WLS console.
  
  Basically, what I'm trying to do is include in my script, a way to test if a reboot is required for all servers that are managed in the field, once the script 'edit domain' is executed. If reboot is required, the script will perform restart.
  
  Appreciate the help and advice, if it's there.
  
  Thank you
  Todd

  Hello.

  The 'need to restart the server' is handful of wlst like this: http://edocs.bea.com/wls/docs100/config_scripting/config_WLS.html#wp1029452

  "In addition: http://download-llnw.oracle.com/docs/cd/E13222_01/wls/docs92/config_scripting/reference.html#wp1153965 but I still don ' t know if an MBean is changed with this attribute, in any case, it might be sufficient for you the script I think.

  Kind regards.

  Aurélien.

  Published by: Aurélien on 30 Jul DEHAY. 2009 09:25

• I received a note indicating that my MAC might be infected by a virus and she said to call a 1-866 number, which was the support Apple... is this true or a scam

  I received a note indicating that my MAC might be infected by a virus and she said to call a 1-866 number, which was the support Apple... is this true or a scam

  It's a scam

  Whatever you do, do not call this number

• Error attribute indicating the Django setting should be DEBUG = TRUE when she is currently DEBUG = FALSE. I don't know how to solve this problem. Need help change affecting please!

  I'm trying to access an online simulation via MyMIS Lab of Pearson for a class online. I was using this simulation a couple of days, but when I logged on this morning, the simulation does not open. I copy and paste the error message that appears when I try to open it. Basically, it reads "you see this error because you have DEBUG = True in your file settings to Django. Change False and Django will display a 500 standard page. I have no idea what Django settings are and have studied how to change the setting, but I'm not familiar with this at all. Any help would be greatly appreciated so I can get my homework done! Thank you!!!

  AttributeError at /simLaunch/launch/
  
  'Settings' object has no attribute 'XLSIMS_LAUNCH_URL'
  
  Request Method: 	POST
  Request URL: 	http://econdip.pearsoncmg.com/xlsim/simLaunch/launch/
  Django Version: 	1.5.2
  Exception Type: 	AttributeError
  Exception Value: 	
  
  'Settings' object has no attribute 'XLSIMS_LAUNCH_URL'
  
  Exception Location: 	/vh/docroots/econdip.pearsoncmg.com/prod/virtualenv/lib/python2.6/site-packages/django/conf/__init__.py in __getattr__, line 54
  Python Executable: 	/usr/bin/python
  Python Version: 	2.6.6
  Python Path: 	
  
  ['/vh/docroots/econdip.pearsoncmg.com/prod/virtualenv/lib/python2.6/site-packages',
   '/usr/lib64/python26.zip',
   '/usr/lib64/python2.6',
   '/usr/lib64/python2.6/plat-linux2',
   '/usr/lib64/python2.6/lib-tk',
   '/usr/lib64/python2.6/lib-old',
   '/usr/lib64/python2.6/lib-dynload',
   '/usr/lib64/python2.6/site-packages',
   '/usr/lib64/python2.6/site-packages/gtk-2.0',
   '/usr/lib/python2.6/site-packages',
   '/usr/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg-info',
   '/vh/docroots/econdip.pearsoncmg.com/prod/server/glservice']
  
  Server time: 	Sat, 30 Aug 2014 14:59:46 -0500
  
  Environment:
  
  Request Method: POST
  Request URL: http://econdip.pearsoncmg.com/xlsim/simLaunch/launch/
  
  Django Version: 1.5.2
  Python Version: 2.6.6
  Installed Applications:
  ('django.contrib.auth',
   'django.contrib.contenttypes',
   'django.contrib.sessions',
   'django.contrib.sites',
   'django.contrib.messages',
   'django.contrib.staticfiles',
   'django.contrib.admin',
   'gldata',
   'econ.ca',
   'econ.ue',
   'gllaunch',
   'datacapture',
   'xlsims')
  Installed Middleware:
  ('django.middleware.common.CommonMiddleware',
   'django.contrib.sessions.middleware.SessionMiddleware',
   'django.middleware.csrf.CsrfViewMiddleware',
   'django.contrib.auth.middleware.AuthenticationMiddleware',
   'django.contrib.messages.middleware.MessageMiddleware')
  
  Traceback:
  File "/vh/docroots/econdip.pearsoncmg.com/prod/virtualenv/lib/python2.6/site-packages/django/core/handlers/base.py" in get_response
    115.                         response = callback(request, *callback_args, **callback_kwargs)
  File "/vh/docroots/econdip.pearsoncmg.com/prod/virtualenv/lib/python2.6/site-packages/django/views/decorators/csrf.py" in wrapped_view
    77.         return view_func(*args, **kwargs)
  File "/vh/docroots/econdip.pearsoncmg.com/prod/server/glservice/xlsims/views.py" in launchSim
    23.     if TPIUtils.has_valid_signature(launch_data, url=settings.XLSIMS_LAUNCH_URL, key='bphsc2014'):
  File "/vh/docroots/econdip.pearsoncmg.com/prod/virtualenv/lib/python2.6/site-packages/django/conf/__init__.py" in __getattr__
    54.         return getattr(self._wrapped, name)

  It's a problem with a Python script that runs on the server.
  The site Web needs to solve this problem.
  If the problem persists then contact them by e-mail.

  You can try to clear the cache and delete cookies from this Web site.

  "Clear the Cache":

  • Firefox > Preferences > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox > Preferences > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

• I tried to install Firesheep and got an error message indicating that Firesheep is not compatible with Firefox 7.0.1 is true?

  is there anyway that Firesheep works with Firefox 7.0.1? The exact error message I received is lower in quotes.
  "Firesheep could not be installed because it is not compatible with Firefox 7.0.1.".

  http://codebutler.github.com/Firesheep/

  Versions of Firefox 4 + is not supported.

• I just got a message from Foxfire indicating that my laptop will not be secured through the operating system on my laptop.

  I opened my laptop and a pop-up message appeared when I opened Foxfire indicating something was Foxfire not be able to secure my computer through the operating system running on my Mac.

  Hello jaynpsfl, this is a true information - unfortunately firefox 16 was the latest version of the browser that supports os x 10.5 - there will be no updates for it security in the future.

  Firefox no longer works under Mac OS X 10.5