try to connect to the rds pool using rds Protocol keeps failing
try to connect to the rds pool using the Protocol rdp guard fail with the following error.
PCoIP works very well.
I fixed it. I had to change to each host of the session that follows.
Tags: VMware
Similar Questions
-
Get 810 error message when you try to connect to the VPN using L2TP protocol
Original title: L2TP will not let me connect.
I am in Workstation 9 and in each virtual machine, I have an AD - DC (2K8R2Enterprise), CA and RRAS (2K8R2Enterprise) and my last vm is a win7 (they are all tests). All are not updated, but the PPTP, IKEv2 work without problem. The second server that has the CAs and RRAS is a member of the AD - DC server. The Win7 is not on the domain and I have Win7 a client certificate. I have ensured that the CA root of trust is in the user store and computer Trusted Root CA. I have also ensured that the Win7 client certificate is in the user store and personal computer. I get a 810 error message when I try to connect to the VPN using the L2TP protocol. I have exhaustively studied this problem and I can't find a solution to this problem. I also raise the functional level of the domain to 2K8R2.
I think this should be a simple and easy solution, but where can I find the answer?Please help me.Thank you for your time.Allan.Hi Allan,
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:
http://social.technet.Microsoft.com/forums/en/category/w7itpro
If you need any other assistance, let know us and we would be happy to help you.
-
I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using a lan cable plug on my netbook (win 7 starter) that has wireless it gives me limited connectivity and no internet
Hi evilcrebyc,
Consult the following Microsoft articles and make sure that all settings are correct.
How to configure Internet connection sharing in Windows XP
http://support.Microsoft.com/kb/306126
Troubleshooting Internet connection sharing in Windows XP
-
Unable to connect laptop (wireless) broadband
Recently, I changed to wired broadband. When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.Remove any preconfigured network settings wireless then rescan to make new connection settings
Hope this will do the needfull
Please let us know
-
CARS: 2 nodes with Oracle single Client Access name (SCAN)
OS: OEL 5.4 64-bit
Version: 11.2.0.3
When I try to connect from the client to the RAC by using the SCANNER, I get ERROR: ORA-12541: TNS: no listenerOracle. I noticed that the service is in place and properly configured (client tnsnames).
servicioBD = (DESCRIPTION = (LOAD_BALANCE = yes) (ADDRESS = (PROTOCOL = TCP)(HOST = scanvip.domain1.local) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = serviceBD) (FAILOVER_MODE = (TYPE = SΘLECTIONNER) (METHOD = BASIC) (RETRIES = 180) (DELAY = 5))))
serviceBD service
SQL > select name, failover_method, failover_type, failover_retries, goal, clb_goal, aq_ha_notifications from dba_services where service_id = 3;
METHOD NAME TYPE PURPOSE CLB_GOAL AQNOT ATTEMPTS
---------------------------------------------------------------- ----------- ---------- -------- ---------- -------- -----
serviceBD BASIC SELECT 180 NO LONG YES
But when I do not use the service created for the tnsnames file SCAN, it's that if I directly put tnsnames to connect to any work of two nodes very well.
Node 1
servicioBD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = 10.210.2.10)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = orcl)
)
)
Or
Node 1
servicioBD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = 10.210.2.11)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = orcl)
)
)
I have also observed the following (cluvfy).
1 all LISTENER_SCAN running node 1
2 there is no TCP connectivity
3 the error message is obtained PRVF-5713
[grid@rac1 ~] comp cluvfy $ scan - verbose
Check scan
Checking the single Client access name (SCAN)...
ANALYZE the running node name? ListenerName Port running?
---------------- ------------ ------------ ------------ ------------ ------------
scanvip.Domain1.local 1521 LISTENER_SCAN1 true true rac1
scanvip.Domain1.local 1521 LISTENER_SCAN2 true true rac1
scanvip.Domain1.local 1521 LISTENER_SCAN3 true true rac1
Checking TCP connectivity to ANALYZE listeners...
Node of ListenerName TCP connectivity?
------------ ------------------------ ------------------------
RAC1 LISTENER_SCAN1 no
RAC1 LISTENER_SCAN2 no
RAC1 LISTENER_SCAN3 no
PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.17) (PORT = 1521)))'"running on the node"rac1"produces no output no output.
PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.19) (PORT = 1521)))'"running on the node"rac1"produces no output no output.
PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.18) (PORT = 1521)))'"running on the node"rac1"produces no output no output.
Check the resolution settings of name to 'scanvip.domain1.local '...
SCAN the IP address status comment name
------------ ------------------------ ------------------------ ----------
scanvip.Domain1.local 10.210.2.18 spent
scanvip.Domain1.local 10.210.2.19 spent
scanvip.Domain1.local 10.210.2.17 spent
Verification of the installation program ANALYZES VIP and the listener has failed
The analysis check failed on all specified nodes.
Could someone help me please.
The solution was to restart scan_listener.
srvctl stop scan_listener
srvctl start scan_listener
-
Windows does not remember the setting.
When I try to connect to the net on my laptop LG I often get the message saying that windows could not connect and I have to go into the advanced settings and check the box that says allow windows to configure the network. My problem is that windows doesn't remember this setting and that I need to check the box almost everytime I try to connect. He made it with my desktop so I was wondering if anyone has a solution for this.Using a wireless router? What is the brand and model of your router? I don't think it's a matter of windows.
Troubleshooting in windows wireless network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows
Hope this helpful. Post back if your problem is not resolved in the link above.
-
Hi every time I try to connect to the internet... .a to install the 'Sonic activation module'... .comes upward, then he told me to ' insert the diskette and click ok "... What is and how can I get rid of him? I don't have this drive. I'm on windows xp. Thanks for your help, Pat
original title: sound activation moduleSeems to me there was a company of game named sonic. We recently hired a game. If Yes (or someone who uses the computer did) you must go to the installation and finish it or uninstall the game.
If this does not work, you could get the free CCleaner and run it but you need a little knowledge to use it. You can watch the start section and see if a program loads the name sonic inside or somewhere in his speech. Delet it is probably correct, but it is best to uninstall the program, get the free RevoUninstaller might help if the windows uninstaller is corupt (CCleaner uses only that). It's a little harder to use, but he'll come down.
-
whenever I try to connect to the internet (mozilla firfox) it says I have to buy vista security 2011 to clean my laptop. How can I get rid of this to connect online
Hello
these rogue program names belong to a type of malware using different names but producing the same results
Read and follow the EXACT at the below link removal instructions
Read this information
Vista anti-virus 2011, Vista Total Security 2011, Win 7 Home Security and include some of the names by a rogue new name change randomly to settle on the victim's computer. When this particular rogue is installed, it will install as a variety of names in different programs, with each having their own graphical user interface according to the version of Windows running on the computer. Whatever the name, however, they are all the same exact program with just a different name and skin on this subject. This rogue goes by many names in different programs, of which I have listed below depending on the version of Windows that is installed on:
Windows XP rogue namesNames of Windows Vista RogueWindows 7 fake namesXP Antivirus Vista anti-virus Win 7 antivirus XP Antivirus 2011 Vista anti-virus 2011 Win 7 anti-virus 2011 XP Anti-Spyware Vista Anti-Spyware Win 7 AntiSpyware XP Antispyware 2011 Vista Antispyware 2011 Win 7 antispyware 2011 XP Home Security Vista Home Security Win 7 Home Security XP Security 2011 Home Vista Security 2011 Home Win 7 Security 2011 Home XP Total Security Vista Total Security Win 7 Security Total XP Security 2011 Total Vista Total Security 2011 Win 7 Security 2011 Total XP security Vista security Win 7 Security XP security 2011 Vista Security 2011 Win 7 Security 2011 XP Internet Security Vista Internet Security Win 7 Internet Security XP Internet Security 2011 Vista Internet Security 2011 Win 7 Internet Security 2011 Follow the EXACT below removal instructions
http://www.bleepingcomputer.com/virus-removal/remove-win-7-Internet-Security-2011
-
Whenever I try to connect to the internet, it gives the error message 651 windows 7
Original title - windows 7 651 error
I recently installed windows 7 and I use a broadband connection... Whenever I try to connect to the internet, it gives the error message 651 while I had no problem with this broadband connection in windows 8.1... How to fix this error, please help me...
Hi Alexandra,.
Please contact Microsoft Community.
- You use a wired connection or wireless?
Method 1: I suggest you use the resolution of the problems of the article below Internet connection and check if it helps.
In Windows network connection issues
https://support.Microsoft.com/en-us/KB/313242
Method 2: Try disabling your antivirus software and then try to connect again and check if the problem persists or not.
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.
Hope this information was helpful and let us know if you need more assistance. We will be happy to help.
-
When I try to connect to the internet it tells me I need network drivers.
Original title: Windows 7 drivers
Hi, I recently built a computer with a motherboard Asus H81M-E. I installed Windows 7 pro 64-bit. When I try to connect to the internet it tells me I need network drivers. Where can I find the drivers? There are all the other drivers that I need to install for the computer to function properly? Thank you for reading, I hope you can help.
I don't know a lot about the generation of computers, but I don't know that you need a network adapter to connect to the internet, which would be listed in the Device Manager. You really need to go to the asus help and support. But to give you an idea of what adapter need use Google to search for: asus h81m-e network driver
Good luck
-
Hi all
I had problems with my Toshiba Satellite A665 to internet connection. Lately when I try to connect to the internet, for the first minute or so it says 'No internet connection' (or something similar). Basically, he has the yellow warning triangle. Sometimes I can open the browser and search normally, but other times - and this happens more often it won't let me use my browser. When I have not fix the problem, he said that the DNS server is not responding. The problem is this same error happens all. unique. time. and the other computers in the House connect to the internet just fine. I called TWC and what I get on their part, it is "there no reported outages in your area. Useful, right? Tends to be gnawed by the use of Netflix and Hulu Plus, but this has never kept internet bandwidth to work in the past. What is going on? I'm so tired of having to go all the way down the stairs to reset the router every hour (on a good day) to get the computer to connect to the internet.I contacted Toshiba and they say that all the drivers on your computer are up to date and nothing is broken. I have also not downloaded or installed anything on my computer.If the reset of the router fixes the problem you should probably watch that as the culprit. Check the software/firmware for the router and see if you can borrow to someone router to test.
I hope this helps.
-
try to connect to the network, need help.
* - Original title - Help network!
Im trying to connect to my network, but it won't let me go up. It says im not connected to any network, but im allowed to get on the internet... the network in the try icon has a red x through it, and no matter what im network I can get on the internet but not on the network. What should I do to fix this? I tried all of the troubleshooting steps and he says that there is nothing wrong,
Hello
1. What is the brand and model of the computer?
2. What is the security software installed on the computer?
3. have you made changes on the computer recently?
4. What is the full error message you get when you try to connect to the network?
5. What are all the steps you've tried?
6. how many computers is connected to the network?
7 is the computer connected to a home network or domain?
8. do you have a wired or wireless?
Method 1.
I suggest you follow the steps in this article.
Using the troubleshooter from network in Windows 7: http://windows.microsoft.com/en-US/windows7/Using-the-Network-troubleshooter-in-Windows-7
Method 2.
How can I solve the network card problems?: http://windows.microsoft.com/en-US/windows7/fix-network-adapter-problems
Method 3.
a. click "Start", go to run, type "services.msc" (without the quotation marks) in the Open box and press ENTER.
b. click on the button continue to check the permission of the administrator.
c. 'Knowledge of network locations' service right click and choose Properties.
d. under the general tab, click Start.
e. click next to automatic startup type.
f. click OK.
Restart the computer and check.
Method 4.
If the problem persists, please take a screenshot of the window "network and sharing Center" and upload it. After the screenshot of the problem you are experiencing. Click on the link: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-c620-401c-a804-9f6337cd3053
I hope this helps.
-
Not able to connect to the server OPAM using the customer remains
Hi all
I have a working server OPAM. I am able to connect to the console of OPAM using url "http://localhost:18101/oinav/opam and could perform all operations as managing the Fund, account, target, check in etc.." Now I'm trying to use the rest of the OPAM API to achieve the goal of managing, according to the documents I should connect to the server of OPAM "https://< servername >: 18102/opam /" but I get no response from the server when I tried to connect in this way. If I try to connect using "http://localhost:18101/oinav/opam"URL I am able to connect and get the response code 200, but not able to invoke any API and get the error"page not found". " I don't know why OPAM server is not sensitive on the SSL port, when I am able to do all operations using oPAM console that still connect to the OPAM server using SSL port.
Please help me.
Did the nslookup of your match servername IP address than 18102 listening?
That is to say
netstat - year | grep LISTEN | grep 18102
vs
Nslookup serverName
In addition, you imported the SSL certificate for https OPAM instance into your customer REMAINS reliable?
-
6i form is disabled when you try to connect to the DB 11g
Hi all
When I try to connect to the local level of database 11g R2 from SQL * PLUS or SQL Developer. But by the form 6i using TNSNAMES connect identifier, shape gives an error and turned off!
but when connecting to the remote database using the answer TNSNAMES connect identifier that it connects successfully.
Why? and how to solve?
Note:
I formatted the server and reinstall Windows Server 2008 and then reinstall the 6i Forms, but that does not solve the problem!
Dear Sir
That we met the same problem to our customer. Follow these steps.
sqlplus /nolog connect / as sysdba shutdown immediate startup restrict alter database character set internal_use UTF8; shutdown startup
Manu.
-
When the creative cloud installs an update happens to 5%, and then he said: try to connect to the server. Any suggestions
Please refer to the document:
- Using creative cloud | Download error in the applications tab of Creative Cloud Desktop Application
- Error download or update Adobe Creative Cloud applications
- Connect to CC - stuck on "Installing update..."
Concerning
Stéphane
Maybe you are looking for
-
Need to purchase Satellite X 200
Guy; I intend to get nine X 200, however through the forums found many problems in terms of driver XP. The machine is really nice and I'm really feeling for these stupid incompatibility problem concern. Otherwise I'll change Toshiba and another :)))
-
Can I put an old computer to Windows 7 (64 bit)?
I have a desktop PC, HP Media Center m7260n, bought in 2006. At ran Upgrade Advisor: other than the need to do a clean install of Windows XP and an Aero compatibility issue, I respect the basic requirements. I have 5.5 GB of RAM installed, but it cur
-
Windows host process (Rundll32) has stopped working
Is a general Vista problem and also a general problem of Thinkpad, but it has what I feel to be a frequency among the W500s so I thought to post it here. In recent weeks, I got this error (Windows host process (Rundll32) has stopped working) several
-
Installation Photosmart C5250 on Windows 7
I tried to install my Photosmart C5250 on my new Windows 7 system. The result is that it cannot be installed on this operating system. Without the center of HPSolution, I can't scan to a PDF file. Is there a cd to load this printer on Windows 7?
-
BlackBerry 10 where can I find the default LockScreen background / 10.3.1
Hello Maybe it's a silly question, I would like to use the default lock supplied with 10.3.1 background (the one below) as my main background as well, but I can't find it on my phone. Anyone know where it is stored? (not in "protected_media/wallpaper