Try to install SP3, it will come again?

Similar Questions

• I try to install SP3 on my old 32-bit xps system.

  I try to install SP3 on my old xp 32 bit system. Receive errors.  I tried all kinds of different links, MS even for SP3 install their support to a download page. can't afford a new computer, stuck with it? I t has no SP2 but this is not a "t really need is can someone help out me." What is my settings? I have automatic in windows to download the dates it doesn't work, I get can not display the page?    Thank you

  You must be at Service Pack 3 level before you can use Windows updates.

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

• I have Windosx XP Media Center Edition 2002 SP2, whenever I try to install sp3, that an error and I need to go to a previous configuration, what do I do to be able to install sp3?

  I have Windows XP Media Center Edition 2002 SP2, whenever I try to install sp3, that an error and I need to go to a previous configuration, what do I do to be able to install sp3?

  I have enough information about your computer to give you assistance-oriented. This might help:

  How to troubleshoot an installation fails to WinXP SP3 - http://support.microsoft.com/kb/950718 MS - MVP - Elephant Boy computers - don't panic!

• I have windows XP SP2 and when I try to install SP3, the current installation stops the computer stops.

  I was recently given an older laptop. I have windows XP Home Edition SP2. When I try to update windows, update web site scans my pc and says I need to install SP3 to update other windows. It downloads, but it starts to install, at Midway, the PC shuts down. When I power backup, windows starts to load, but discounts can go back every time. Only way I can get windows to work again is to join the conservation program and windows restore to before sp3 install atemp. I discovered that I need to install microsoft .net framework 2.0 SP2, but as it tries to install it, it stops and gives me an error code 1601. What is the problem and what can do to reslove? I don't know any history of what has been done until I got it. I know it works, but without SP3 and needs updated to work correctly. What can I do?

  Hello Chris3535,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it seems that you are having problems with Windows XP Service Pack 3. As I understand it, you cannot install Windows XP Service Pack 3.

  Step 1: check first pre - it not to install Windows XP Service Pack 3

  Steps to take before you install Windows XP Service Pack 3

  Step 2: Perform the steps in the link and check.

  You cannot install updates after a repair of Windows XP or after Windows XP SP3 is installed immediately after a new installation of Windows XP SP2

  Meet us if you encounter any problems during the Installation of Windows XP SP3.  or any other matter of Windows and I would be happy to help you.

  Good day!

  Hope this information helps.

• try to install sp3 on win xp pro Error Code: 0x8007042B the process is completed. Please help me

  Ive searched the web without a bit of luck. I reinstalled win xp sp2 took me a long time to get Installer 3.1 install. Finally, he did. now im really stuck with this problem and don't know where to begin the search. It would be really nice to have a fix for this, but I guess that's wishful thinking. can someone please tell me what I have to manually do to solved this problem so I can install sp3.

  Thank you, don

  Hi longryder,

  See the link below for advice troubleshoot an installation of xp sp3 failed.

  http://support.Microsoft.com/kb/950718

  Good luck.

• Get [error number: 0 x 80070424] when you try to install SP3 with Windows Update

  I got [error number: 0 x 80070424] when I was trying to do the updates window to install sp3, whatever that means? And how to fix it?

  http://support.Microsoft.com/kb/968002

  or

  http://www.techiecorner.com/112/error-number-0x80070424-in-Windows-Update-solution/

  should fix

• Try to install sp3, but when you restart windows does not restart

  I can't be in the updates because I think that I need sp3.

  I have sp3 on a flash drive and installed but when it

  says to restart it restarts, but windows does not restart.

  I am running windows xp2 and Ie 8.

  Hello

  You can check this link...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-Update-wont-work-after-reinstall-of/6e0d639a-EC79-4296-866f-e337c4679f25?page=2

  ... I suspect that your situation may be the same as BonitaTennis.

  If not, please answer with the details of your PC and to know exactly what happens when "windows does not restart.

  Tricky

• When you try to install Windows XP SP3, I get an error that I need to have service pack 1 installed first.

  Upgrate XP problems

  Hello

  I have an older version of XP (2002) and I just reinstalled after formatting my drive. I have problems to update to sp3. I get the error: at a minimum, you must have installed SP1. If I try to install sp1a hang it up because there is no response from the server. Can you help me please?

  If you have JUST done a clean install, read on. (Otherwise after return, especially if you have already installed anti-virus software.)

  SP1a is totally useless.

  You can use this upgrade path:

  Gold XP to XP SP2 to XP SP3.

  Here are the detailed instructions:

  1. download the installation of SP2, SP3 and IE8 files. I prefer to keep these on a USB key, but this is optional. Here are the links to all the installation of three files:

  http://www.Microsoft.com/download/en/details.aspx?ID=28 (for SP2)

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  And if you wish, download the Setup file of a good anti-virus program. I recommend Avira free Antivirus:

  http://www.Avira.com/en/Avira-free-antivirus

  Other good antivirus programs include Avast and MSE (both free):

  http://www.avast.com/free-antivirus-download

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

  2. disconnect Internet.

  3. temporarily disable the automatic updates.

  4. install SP2. Restart TWICE.

  5 install the SP3. Restart TWICE.

  6 switch to IE8. Restart TWICE.

  7 install an Antivirus software.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  8 make sure that firewall Windows is activated (it should be).

  (Now you can physically reconnect to the Internet.)

  9 visit Windows Update to download and install only the critical security updates.

  10 re - enable automatic updates.

  After the back if you need guidance.

• "ntoskrnl.exe is open or running in an another program'when I try to install win xp sp3"

  original title:, ntoskrnl.exe is open or ongoing in another program, when I try to install win xp sp3 / error message/how do I find them to close

  How can I find these programs to close

  Hello

  1. What is the exact error message?
  2 - what you want to say that you receive this error message when you attempt to install service pack 3? If Yes, then try to install SP3 in clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on Startand then click run.
  2. type msconfigand click OK.
  The System Configuration Utility dialog box appears.
  3. click on the general tab, click Normal startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Please provide more specific information on the issue. This could help us help you better.

• try to install XP SP3, but really takes a lot of time?

  Try to install SP3, but it has been 1 1/2 hour and only maybe 1/2 way. How long does it take?

  Try to install SP3, but it has been 1 1/2 hour and only maybe 1/2 way. How long does it take?

  It may take some time. You have now no choice than to let it run its course. You certainly don't want to interrupt the process. If it fails, then you can do it another way. Let it run...

• Try to install Windows 98 then switch to XP

  I have an old Emachine T1100 with 512 MB memory and I'm trying to install windows 98 on it, and then upgrade to Windows XP Home edition.

  I have the original disc of Windows 98, but when I try to install it continues to come with an error message indicating that a fatal error has occurred and widows was closed down to protect. I also have a disk of Norton ghost, but once again the same message is received. Can't go on the internet with the Emachine T1100 so I use my other computer. I need something I can download and put on a cd and then put that in my Emachine T1100 to fix. Any suggestions would be appreciated.

  Sorry my mistake

• I get an error 201 ever time I try to install my adobe creative on my PC software

  I get an error 201 ever time I try to install my software adobe creative on my PC. I start of aplication, and 15 minutes after it starts to install, I get this error 201 and I can´t continue with the instalation

  Follow the procedure below and check.

  N ° 1)

  Navigate to C:\Program Files (x 86) \Adobe.

  Open the Adobe folder and if necessary remove Adobe Creative Cloud folder.

  Step 2)

  Temporarily disable anti-virus and firewall.

  If you use Anti Virus Mcafee, AVG, Notron applications... etc. Be sure to turn off their smart firewall.

  Step 3)

  (1) open Control Panel and then click on the network and Internet"" option.

  2) click on Internet options, click on the tab "connections".

  (3) in the 'Connections' tab, select 'LAN' settings, you will be able to view the LAN settings box.

  (4) check the box-"automatically detect settings" and then "uncheck" all the other boxes as "configuration Script auto use", "Use a proxy server," proxy server ", then click on the ok button."

  5) click on the "Network settings" button once again, make sure that "automatically detect settings" is the only option selected, open the LAN Properties window.

  Note: If you use Wireless/Wifi Internet connection, try with Ethernet connection.

  Then try to install Adobe Creative Cloud app again.

  Reference:

  Download error, installation or update of Cloud Creative applications

• CANNOT install sp3 in windows xp HELP.

  I can't install the sp3 for windows xp, when I try to install and reboot a black screen appears with, various messages to, starting in the last known configuration starting in the last known good configuration, start with network etc etc, I have to use the keyboard to select the choice 1 and then I have to do a system restore to get back into my computer. I ran my anti virus which is coming back clear, NO spyware or viruses. My computer is also very slow, I have NO music on the computer programs or anything that could make it go slowly. I don't really know what to do, I'm not very tech at all, make me more and more confused as to what to do appaert to throw our the window lol lol. Thank you VERY MUCH in advance for any help given11 Karen x

  Nanna leighlas,
  Please post with the information requested here: what to post in the Windows Update forum

  I would say you can try a different virus scanner (such as a scanner online) just to check that you don't have a problem with virus\malware.  Here are some links that can help with this:
  Get rid of malware 
  Can I clean an already infected computer?    
  Windows Live OneCare Safety Scanner Windows XP

  Then, you must perform a clean boot on your system and then try to install SP3.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 1327 Invalid drive: G:\ when I try to install a program

  Hi all someone can help. When I try to install a program, it comes up with the error message above. Why? This has just started happening, and I don't know why. I have not changed any got to my knowledge.

  Please, perform the following steps:

  The ORB-click Start and type CMD into the search, command prompt right click the icon and left click on run as administrator
  In the command prompt, type the following:
  subst G: C:\
  Press enter

  Try to install the software you want

• Try to install CS3 Premium

  I'll buy Premium CS3. The person selling it made me the license transfer, even if I waited 3 weeks for an email on this subject and it didn't happen (from Adobe).

  So, I thought I would try it anyway. He sells me his sequence of complete upgrade, PS5.5, premium CS2 and CS3 Premium, so I can follow the same path he did. Yes, it has disabled and uninstalled everything.

  He also sent me the list of registered applications, a screenshot of his account. It shows that he had PS5.5 and CS2 Premium registered - it looks like it didn't save Premium CS3.

  So, I installed CS3 - no luck. At the end of the process I was invited for the CS3 sn, fine, it works. So I wonder for an eligible sn, the CS2 sn has been accepted. Then I was asked to enter a 2nd sn, CS2 upgrade qualification. All I have is the upgraded version, which has been accepted as full version, but not as an upgrade. Don't have a different serial number, not offered choices more.  Even though I have autonomous PSCS2 entirely legally installed (registered under my business account). Oh and PS7, if that's important. Also completely legal.

  OK, uninstall CS3 (correctly) and start over.

  Install the CS2. All right. It installs, using the sn of PS5.5 as well. Sign me up I enabled it.

  -The transfer must be OK and legitimate, or I couldn't have registered, right? Because it has BEEN registered for the guy who sells for me. I have proof. And I have just registered it. Yes, by using the correct email address.

  Try to install CS3, without uninstalling CS2 again.

  CS3 serial number is accepted.

  BUT now I need the sn for CS2.3 Premium continue. Not CS2. This one is rejected. Must be CS2.3.

  So I'll open a question in the support - but I can only ask a question about my products registered - which would have been, do not include CS2!

  Until I get home phone hell, can anyone place a flaw in all this?

  I had the same problem. I was sent to the wrong upgrade. I just called Adobe and they generate code, you can enter you can complete the installation and activate it. Ask a supervisor. If everything has been transferred to your name and you need CS3 I don't understand why they can't help you.