Try to install the Lifecam cinema software. Model 1393. Windows 7. Dell 570 PC

Similar Questions

• Error 1721 when you try to install the Sprint SmartView software to use the Sierra Wireless 598U device.

  Error 1721 when you try to install the Sprint SmartView software to use the Sierra Wireless 598U device.

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  "Connect to a network, mail and the Internet."

  They will help you with your question in the Vista Networking Forum above.

  See you soon

  Mick Murphy - Microsoft partner

• I try to install the McGraw Hill software and get an access denied error message. I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  I try to install the McGraw Hill software and get an access denied error message.  I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  Right-click on the setup.exe > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• I try to install the game Exile web spider on Windows 7 software

  This error appears when I try to install the exile of Spiderweb software, on my Windows 7: "the Version of the file is not compatible with the version of windows you are using. Check your computer system information to see whether you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  I'm not savvy computer very and I need help to find what I need to do. I tried the shooter of program compatibility problems, but when I hit the button "Start program" after setting the parameters, nothing would happen. I tried several times.

  "The Version of the file is not compatible with the version of windows you are using. Check your computer system information to see whether you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  Press the Windows key and Pause/break key to see if you have a version of 32 or 64-bit Windows 7.

  Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Forum Windows 7
  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Bruce Hagen ~ MS - MVP [Mail]

• Try to install the hot sync software for Palm Treo. SE MSG saying it is not installed correctly.

  Mobile phone software Palm Treo wont install on my new HP laptop.

  Hi Dotdoug,

  A. is the first time that you connect the device to vista?

  B. What is the exact error you get when you try to install the software?

  C. what version on Palm treo do you use?

  D. how you try to synchronize the device?

  You can try to download windows mobile device center 6.1 and then try to synchronize the device with vista.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=46F72DF1-E46A-4A5F-A791-09F07AAA1914&displaylang=en

  The link below provides more information about synchronizing palm with vista.

  http://KB.Palm.com/wps/portal/KB/na/Treo/T850/unlocked/solutions/article/33441_en.html

  http://KB.Palm.com/wps/portal/KB/common/article/44532_en.html

  Hope this has been helpful.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Impossible to install the Lifecam cinema on Windows XP SP3 software

  I can't install the software on my Windows XP machine.

  I get the following error:

  Microsoft Visual C++ Runtime Library

  Program:... UME ~ 1\Paul\Local Settings\Temp\LifecamSetup\setupstb.exe

  This application has requested the execution in an unusual way.
  For more information, contact the application support team.

  Ok

  ___________________________________________

  I tried everything I could find on the internet and I get the same error!
  Microsoft wants an identification number of the software product, which I don't know, because the software will not load.

  Any advice would be greatly appreciated!

  PS: I don't have any problems to load the software on my Vista 64-bit.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Try to install the new copy off error vista WINDOWS CANNOT OPEN THE REQUIRED FILE 0x8007000D

  OT: Hey tried down laptop restore none tried to install the new copy off vista prem with no joy only error 0x8007000D WINDOWS can NOT OPEN THE REQUIRED of joy

  Portable Hi down tried restore none tried to install the new copy off vista prem with no joy only error 0x8007000D comes WINDOWS CANNOT OPEN THE REQUIRED FILE of joy

  Hi jamesgillwn,

  1. when exactly you get this error message?
  2. what disc do you use to reinstall?
  3. What is the exact error that appears when you try to start?
  4. at what point of the installation you get the error message?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  Try the steps from the following link:

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Note: When you perform the installation, you will lose the data, make sure that you need to backup your data before you perform the installation.

• "run as" error code when I try to install the HP printing software

  I'm trying to install HP Deskjet F300 to my printer/scanner series; whenever I do I get a message "run as" telling me I don't have administrative privileges. However, I am the only set upward on this computer. How to do this?

  Try right-clicking on the printing software > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• I try and install the updates for software that I have not yet.

  Why Windows Vista wants me to download updates of the programs, I have not yet

  For some reason it wants me to download updates for Office 2007 security and I have same Office 2007. I'm just beta test right now version 2010. And updates won't install even. Just telling me error 646.

  Anyone have any ideas why its doing this.
  Toppers BBS http://toppersbbs.dtdns.net

  Hello

  Updates from time to time offer other, you do not need. You have any viewer Office or had a
  Office trial on the system?

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Install errors with Windows XP Sp3 every time I try to install the updates or software, I get an error message telling me that I have a current installation.

  I have Windows XP version 2002 SP3 and when I try to download and install updates, windows messenger or things like this I get an error message telling me that I can not install because of an another current installation, I tried to find what is installing but I can't pinpoint what or where its tring to install. Y at - it somewhere I can look at or a program I can run to find this mysterious install so I can kill him. I really apperciate any help on this. Thank you...

  Hi friskymarine,

  1. do you run any Setup before the show?
  2. what updates you trying to install?

  We recommend that you restart the computer before start you the installation of update. If the problem persists, then reregister the Installer engine. To do this, try the following steps:
  a. Click Start, click Accessories and then click command prompt.
  b. at the command prompt, type the following and press ENTER after each line:
  MSIExec /Unregister
  MSIExec/regserver
  c. check the difference.

  Task Manager to use to see if any background program or process is running: http://support.microsoft.com/kb/323527

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to install the 32-bit software on my Windows 7 Home Basic 64-bit?

  I use the family Windows 7 Edition Basic 64-bit. Now I want to install a 32-bit program (software of Rockwell RSView32) which works well on Windows XP Service Pack 2, but the installation of the program Wizard does not open in my Windows 7 Home Basic 64-bit. I tried the shooter of compatibility issues. Even he couldn't help me.

  What should I do to install RSView 32? Can someone help me?

  Thank you...

  Usually 32-bit software installs correctly on a 64-bit system, however, some applications are unspecific and if so, even in compatibility mode is unlikely to succeed

• Cannot install the drivers and software for HP Deskjet 5650

  I removed most of the HP entries to my printer from the Start Up. Since then I have not been able to get the Printer Wizard to start. Recently, I uninstalled everything related to the printer from Add Remove programs. Since that time I tried to install my HP drive. It comes up with the error that the software does not support my operating system. My operating system is Windows XP Home Edition SP3. The software is looking for Windows XP. I downloaded the drivers and software from HP. When it runs, it starts very well. For some reason, it isn't detecting my printer. After you select how the printer is connected to the computer and the connection at the same time the software tries to finish, but he comes up with an error and says it cannot complete the installation. I am able to install the drivers, but when I try to install the drivers and software is when the error appears. How can I fix? It would be nice to use the wizard for printer hp again.

  I found the solution to my problem. Before I could install the software and drivers for my printer that I had to remove completely all the software and the printer driver. Here's what I used to delete the printer driver. Restarting my PC after removing the printer driver has been the most important step. Everything works fine now.

• Attempts to install the 2006 version of britannica on windows 7 but cannot take the step of configuration of the Setup program.

  Encyclopedia britannica 2006

  Hello. I try to install the 2006 version of britannica on windows 7, but can not reach the stage of configuration of the Setup program. Appreciate any help. See you soon

  See the developers website for compatibility with Windows 7 and if there are updates, corrections or difficulties that might ensure compatibility.

  Windows 7 Compatibility Center

  Check if your application software or hardware is on the list

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Software:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=software

  You can also try to run the program in compatibility mode

  You can find more information on compatibility modes in the articles below:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-question

  The software is designed for an earlier version of Windows such as Windows XP? Most older programs don't work with Windows 7, in particular some programs for Windows XP, can you need to perhaps upgrade to Windows 7 Professional or ultimate edition if you run not an edition and download the Windows XP Mode free program which will allow you run old programs:

  Run in Windows XP Mode requires:

  (1) Windows 7 Professional, Ultimate or Enterprise (not supported in Home Premium).

  Windows XP Mode and Windows Virtual PC

  http://www.Microsoft.com/Windows/Virtual-PC/default.aspx

  Windows XP Mode now accessible to more than PC

  http://windowsteamblog.com/Windows/archive/b/Windows7/archive/2010/03/18/Windows-XP-mode-now-accessible-to-more-PCs.aspx

  Get started with Windows Virtual PC

  http://www.Microsoft.com/Windows/Virtual-PC/get-started.aspx

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

  Windows 7 - upgrade Express features:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade

• SE error message: 'tsbyuv.dill' is missing, when you try to install the Creative webcam model No. VF0350.

  Original title: Installation of Web cam problem

  Mr President, whenever I try to install the creative material no web cam model. VF0350 to my laptop I get the error message that the "tsbyuv.dill" file is missing and asked to search for the file in c:\live!c~1\videoi~2\i386 is missing, so impossible to install my webcam creative VF 0350. I don't have the CD to install this product and so when I connect it to USB port on my laptop it doesn't work

  Hi Germany,.

  What is the brand and model of your laptop?

  Tsbyuv.dll is a module that contains functions to manage the Toshiba video display.

  If you are using a Toshiba laptop computer, you can check out the Toshiba support link and try to update the latest version of the drivers for the chipset and video drivers and check.

  Toshiba support

  You can try to download the drivers for the webcam from the following creative support link and check.

  Live! Cam Chat IM (VF0530)

  Also, check out the following links:

  http://support.creative.com/kb/showarticle.aspx?SID=53034

  http://support.creative.com/kb/showarticle.aspx?SID=48811

• When I try to install the upgrade of the software real player says I need, he says that there is no installed: 246 encoder and not enough disk space

  no installed: 246 encoder

  When I try to install the upgrade of the software real player says I need, it is said that there are no H 246 encoder installed and not enough disk space, even if I removed several programs releasing upward (I hope) a generous amount of disk space. I have a Toshiba satellite P105-S6124 2006.

  Hello

  ·         The question is limited only with Real Player?

  Method 1:

  You can try running Disk Cleanup in Windows XP, which will safely remove unused files from the computer and check if that tool:

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  Method 2:

  You can try to install the latest codec pack from the Web site by using one of your favorite search engines and check if it helps:

  With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

  See also:

  http://www.Microsoft.com/download/en/details.aspx?ID=507

  Method 3:

  If the problem is specific to Real Player, you can try to uninstall ad reinstalling the program and check if it helps.

  How to change or Remove a program in Windows XP