Try to learn the vcO - no actions in the workflow

Similar Questions

• Try to learn the Math.max function

  Hello

  I'm trying to understand how to use the Math.max function. Here is my simple code, but it has an error.

  Anyone know what I did wrong here.

  Thank you

  function myBiggie(); {

  Math.max (4:Number, 19:Number);

  }

  myBiggie();

  Babs

  There are a few mistakes and no way to see what the outcome will be.  Try the following and see how it differs...

  function myBiggie (): void {}
  trace (Math.Max (4.19));
  }
   
  myBiggie();

• 'Order' is not executed correctly in vro7 workflow... no error is displayed in the workflow...

  Hi all

  I'm trying to run the command nsupdate through the class 'Order' in the workflow vRO7 below. The workflow is executed correctly, but when I checked, I found that nsupdate command does not run successfully. I get no error in the workflow.  the resultOutput shows "2"... I'm confused... no idea how to run the command using 'Command' properly... Please help me...

  Here "tmpFilePath" is the name of the sh file what valid script content.  Nothing is more must be configured?

  

  Thank you

  Miloud

  You can check the /etc/vco/app-server/security/ddns-update.key file ownership/permissions?

  You can do this for example. running the following command in a terminal Linux

  ll /etc/vco/app-server/security/
  

  If the owner/group is set to root (maybe put the root when you copied the file), then could you change owner/group to vco with the following command, and then try to run the workflow?

  chown vco:vco /etc/vco/app-server/security/ddns-update.key
  

• Can not find all the workflow integrated

  I think I saw them once. But now I try to use the workflow integrated into orchestrator and can not find them...

  I just see http * snmp * documentation workflow - but where are all the other workflow integrated?

  found this article, it has resolved.

  vCenter Orchestrator 5.5 has no vCenter workflow in the library.

• I had installed the captain claw game and when I try to run the following error report is: of the Side-Scrolling Action-Arcade game has encountered a problem and needs to close.

  original title: C:\DOCUME~1\hariraj\LOCALS~1\Temp\7f3f_appcompat.txt

  I had installed the captain claw game and when I try to run the following error report comes... Please solve my problem...

  ....

  ARCADE-ACTION SIDE-SCROLLING GAME

  Of the Side-Scrolling Action-Arcade game has encountered a problem and needs to close.  We are sorry for the inconvenience.

  ERROR SIGNATURE

  AppName: cla.exe AppVer: ModName 1.3.0.60: cla.exe
  ModVer: 1.3.0.60 Offset: 000f3956

  THE FOLLOWING FILES MUST BE INCLUDED IN THE ERROR REPORT

  C:\DOCUME~1\hariraj\LOCALS~1\Temp\b285_appcompat.txt

  Please please please please help me... i will be grateful to you

  Hi Raj Kumar,

  You can follow the steps mentioned in the article below, which deals with a similar question

  Game hangs or quits unexpectedly
  http://support.Microsoft.com/kb/303032

  (Article apply to Microsoft games, steps for other games)

• try to open the Control Panel, a statistics box "this file has no program associated with it for performing this action.

  When I try to open the control panel a stats of dialog "this file has no program associated with it for performing this action. Create an association in the creation of an association in set Association Control Panel. "How to do that when I can't the mother lode, the program control panel? Thus the program Windows Fix It; t fix it.

  Hi ChuckCase,

  1. don't you make changes to the computer before the issue occur?
  2. what program of fixit of windows are you running?
  3. what happens when you try to open Control Panel?
  4. do you get an error message?

  Method 1
  I suggest you try the steps from the following link:

  Icons do not appear in the Control Panel, or you cannot start Control Panel, the Welcome Center, or games in Windows Vista
  http://support.Microsoft.com/kb/936686/en-us

  Method 2
  I suggest you to scan SFC.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• Whenever I try to download the update, I've learned the update failed with error U44M1P2003 code.

  Whenever I try to download the updated version, it fails and cites the U44M1P2003 error code. Can we help.please

  Robert123

  Thanks a lot, this question comes with the release of Photoshop elements or Premiere Elements.

  Please refer to the instructions in the links below, this should help solve the problem:

  Error Code U44M1P2003

  Error Code U44M1P2003 when updating of PS12.1?

  12.1 error installation update | Photoshop Elements, first Elements

  Let us know if that helps.

  Kind regards

  Bani

• Using script - library locked when you try to add the file to it

  Hello

  I'm just a simple script that I can run with my engines of the action, so if I add new enum values I can create new wrappers quickly. I am able to create a new VI on disk, but when I try to add the the VI to the library, I get "error 1562: library, or the specified project is locked." Just before adding the article, I tried to adjust the State of the library "Not locked", but has not been the tower.

  Directions to see the error:

  Open attached zip file

  Open 'Engine.lvlib Action '.

  Run "Script - Create Wrapper.vi.

  Please let me know how to get around this, I thank you,

  Gregory

  There are two reasons at least a library locks: 1) something he possesses is running, 2) is open in two or more instances of the application.  (This applies to classes too.)

  I started a project and took your scripts out of the library (to avoid the #1) and then open your Library Reference by path in your script, be sure to include the reference of the application (to avoid the #2).

  Works now.  (With the exception of the Init.vi but you mentioned earlier that you knew about it. But point 1 and 2 of article work fine.)

• Corrupt the VI block diagram (try to view the BD accidents LV)

  The attached corrupt version 2010 VI in the room is '8810A control.vi.'  I put work a few days into it, so it would be nice to get it back.  I can open it fine to display the front panel.  When you try to view the block diagram, an outline of the BD window appears and freezes LV.  Usually, after a few moments, LabVIEW itself disappears completely.  No error message; no sign of it in the taskbar or any where.  I tried to save the VI to a previous version, but LV will receive an error.  In trying to "Double hierarchy to the new location", I get a popup saying "LabVIEW: file generic i/o error.»  I then did a copy of VI, open and tried to delete everything from the face before completely.  Still can not go to the BD.

  I think that what caused the error was when I accidentally clicked my mouse button that I arrived to move the cursor quickly through the BD of this VI.  I couldn't tell if it hit or moved something on the comic.  I don't remember for sure, but I think that at this time there LV froze and I had to kill him and restart.  After happened yesterday, I moved on to work on other screws which have not been affected.  I guess I'll have to recreate (because I had not yet created backups).  in the future, I hope that I can remember save projects at least twice a day.  I've used Mercurial and it works well.  Hard lesson learned.

  Try this.  I saved to LV9, opened with LV9 then did a cleanup of comics.

• How do we uninstall 'player fantapper' program? When I try to uninstall the program he wants to open and run.

  How do we uninstall 'player fantapper' program?  When I try to uninstall the program he wants to open and run.

  Learn how to use Bing.

  http://answers.Yahoo.com/question/index?QID=20110425162538AAU5Iun

• I downloaded the 32-bit, Windows 7, Internet, and now when I try to open the file you just downloaded with an MS-DOS screen opens then closes instantly. What should I do?

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi Chris.Plucker,
   
  Thank you for using the Microsoft answers Forum
   
  I would like to ask you a few questions to better understand:
   
  (a) you try to open the file from Internet Explorer?
   
  (b) if so, have you tried with other browsers?
   
  (c) from which site did you download Windows 7?
   
  (d) what is the name of the file you want to download?

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  Follow the steps below to put your computer in a clean boot state:

  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  1. sign the computer by using an account with administrator rights.

  2. click on the Start button, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  3. on the general tab, click Selective startup, and then clear the Startup items load check box. (The box use the Boot file is not available.)

  4. on the Services tab, click to select the hide all Microsoft services check box, and then all disable.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  5. click on OK, then restarting.

  Check the link to learn more about the clean boot below:

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click the Start button, type msconfig.exe in the Start Search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  2 in the general tab, click the Normal startup option, and then click on OK.

  3. When you are prompted to restart the computer, click restart.

  Waiting to hear from you

  Thanks and greetings
  Aziz Nadeem - Microsoft Support

• When you try to print the document his service hence giving error does not

  I am using windows xp pro sp2

  When you try to print the document his service hence giving error does not

  then I start the services.msc print spooler service, but this only works for printing after that it gave the same error

  Please help me

  Hi kalpesh_vaghela,

  1. Did you the latest changes on the computer?
  2. What is the full error message that you receive?
  3. What is the number and model of the printer?
  4. You use any program to print the document?
  5. Are you experiencing a similar problem with any program that allows you to print?
  6. You have security software installed on the computer?

  Method 1

  See the link below and try the fixit tool available, check if it helps.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

   

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.

  When you are prompted, click restart to restart the computer.

• Make 'Open with' when you try to access the Western Digital My Book Essential

  I had this external hard drive for a few years, it has always worked well. I recently had to factory restore my computer and external has been working very well then, but now whenever I try to open the drive, a window saying 'Open with', and a list of the programs on my computer that I could use to try to open it with.

  None of them have worked. I can access the files on the disc if I search for them with the search command, or if I try to open one of them of any other application, IE: Word, but it opens normally.

  I called WD; they say it's a problem of microsoft. I've walked by here and google it as much as I the chance, but doesn't that seems to be a particular problem, and I don't know what to do.

  Thank you.

  ... I've recently had to factory restore my computer...

  Was it a reinstall of Windows on an installation disk or a restore recovery where you used an Original Equipment Manufacturer (OEM) restore the function either BIOS or a menu option?

  If it were the first, you will need to install the drivers for all devices integrated on the motherboard systems you.  You get these or the web site of the manufacturer of the motherboard or, if a support system on the packaging manufacturer's support web site.

  If the latter, you may need to install updates for the software updates USB which were in Service Pack 2 and Service Pack 3 for Windows XP.

  It would be useful to learn more about your system.  that is, Windows version, edition and level of service pack, manufacturer and model of the motherboard, or, if a system, manufacturer and model of the system.

  Please read: KB555375 - how to ask a question

• When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties

  I move the file from my old PC which took place with Vista on a new computer running with Win 10 where I have Windows Live Mail is installed.  When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties".  After studying this issue on the forums, a proposed solution was to reformat the drive in NTFS format, I did.  This does not solve the problem.  Any suggestions?  Would it be OK in this case to ignore the message and copy the file without its properties?

  Well data files/user of vista should work. Yes a NTFS format is good, go to run, or cmd, type:

  diskmgmt.msc in msc, R.click on the material, delete the partition, create one, format. Use the default settings,

  Once thru, L.click the disk, go to actions, all, select 'enable '.

  In addition, live windows for vista is microsoft discontinud

• Whenever I try to change the settings for startup from the Control Panel, a pop up tells me that I need to activate Windows Defender and open

  I installed Microsoft Security Essentials today and I'm trying to edit startup programs. Whenever I try to change the settings for startup from the Control Panel, a pop up tells me that I need to activate Windows Defender and open.  However, most of the security will not allow Windows Defender be turned on and I want to change the startup parameters.  How can I accomplish this?

  Hello

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And now edit startup in Vista without using Defender programs, use one of the following methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.