Try to set up the workspace. Stuck at the required SMTP command prompt.

Similar Questions

• When I try to set up the synchronization and open an account, I get the invalid e-mail when I start typing my e-mail address.

  not valid email appears when I try to set up the synchronization

  Just keep tapping until the e-mail address is typed completely.

• Re: Satellite Pro C660 - how to do the recovery with command prompt disc?

  I have a brand new Pro C660 of Satellite. It worked fine for a day, now it will not load windows. I don't have to create the recovery disks, as I only had a few hours (Yes, Yes, I know, should have been the first thing I did). All data are present (but backed up just in case USB) and I can see the folder HDDREcovery with all data intact. However, I can't run the application to create recovery discs. Does anyone know how to extract the images and create the media using only the command line? (I can go into command prompt by booting from the Windows 7 disc a friend). All options fail own laptop startup disks. It says 'Windows does not load' and I try startup repair, but it detects no error. Any help/thoughts on this will be greatly appreciated!

  Hey,.

  It of not possible to create the drive with command prompt recovery. You must use the Windows Toshiba Recovery Media Creator.

  Now it s too late for you, but you can order a disc here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Why say that I have a wrong e-mail address when I try to set up the synchronization?

  I have an ipod touch. I downloaded the app home of firefox on the device.
  I then tried to synchronize my computer at home.
  When I try to set up a private account with firefox that I go to 'tools', enter "set up a synchronization", and then "create a new account. A window is this "e-mail address." As soon as I start to get into my email, that an "x" appears, followed by "it's a wrong e-mail address. That is what it is?

  Just keep typing until you have entered the full e-mail address.

• Try to set up the ICS using a WIFI dongle on your desktop via a router to other machines

  Hello

  I have an intermediate knowledge of networking systems, but I'm a little confused here and looking for a little help. That's what I try to do;
  I have an office with 3 computers all connected to a home network via LAN (through a router). One of the machines has a wireless dongle which is connected to a connection high speed of our adjoining office (and their network). I'm trying to set up the PC with the dongle to use internet connection sharing with the rest of the PC. Is this possible? And I need specific adjustment / cable on the router?
  Any help would be appreciated. It's probably also worth noting that I am unable to do a lot with the router/modem that is actually connected to the internet, as it is one) in a nearby office and b) not ours. The office just next door are asked "loan" us internet until we can be connected in a few weeks. We also use Windows 7 ultimate N

  Hello

  The question you have posted is better suited for the TechNet forums. You can post the question on the link below.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  I hope this helps!

• When I try to set up the live tv watch, he finds and then says cannot detect ir material. What can I do to fix this

  I INSTALLED A "AVERTV HYBRID VOLAR MAX TV TUNER AND MY WINDOWS 7 SHOWS THAT, BUT WHEN I TRY TO SET UP LIVE TV IT SAYS"IR MATERIAL.
  NOT DETECTED... " I HAVE ALSO A REMOTE WINDOWS 7 THAT WORKS, I BOUGHT IT THINKING HE COULD SOLVE MY PROBLEM, BUT IT DID NOT.
  JUST LIKE HOW TO IMPLEMENT HELP WOULD BE MUCH APPRECIATED THANKS

  Hello

  What program do you use to watch TV Online?

  Run the implementation of corner store TV tuner - he made sure that your computer receives a TV signal, and that your TV tuner is connected and configured properly.

  Open the set up TV tuner Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-set-up-TV-tuner-Troubleshooter

  Please visit the links below for more information:

  Set up a TV signal in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-TV-signal-in-Windows-Media-Center

  What should I know before adding TV tuners to use with Windows Media Center?
  http://Windows.Microsoft.com/en-us/Windows7/what-should-I-know-before-adding-TV-tuners-to-use-with-Windows-Media-Center

  Let us know the result!

• Try to set / change the password BIOS admin via the script WMI on ThinkStation D20

  Hello Lenovo Community!

  Start using the WMI Lenovo_SetBiosSetting class on a D20 system.

  If I understand the documentation that there is a limitation on the BIOS password in the past, but I updated to the latest BIOS Rev who support States was added for this feature.

  I use a script that changes the supervisor on computers password successfully thinkpad, but when even to run the script from command line on the D20 system it returns "SUCCESS" however to change the password did not effect!

  I'm using the right parameters are the standard of lenovo

  ' pap, oldpass newpass, ascii, we.

  I thought maybe "pap" is not the correct setting for password Admin on the D20, however the WMI available, posted 2010 guide, does not show otherwise.

  Someone at - it an example script that they can display successfully change the password on a D20 system?

  Please and thx!

  Did you run the SaveSetting script after changing the password?

  You can get the SaveSetting script from the sample scripts D20 located at the following link:

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=UM002033

  You can use the script SetAdminPassword from the library of scripts of series E, then a follow-up that with something like what follows before restarting:

  "cscript SaveSetting.vbs" originalpwd, ascii, we.

  Replace 'originalpwd' with all what your existing password was at the time wherever you booted the system.

• How to access the parameters using command prompt - administrator account

  I am administrator on my machine Home premium windows 7 and tried to make a sfc/scannow command prompt, but it said that I need to run it as an administrator. I need to know how to access this setting so I can use the command prompt. Thank you.

  Steve

  When I click on

  You should right click to see the drop down menu. Right click = right button of the mouse. Click the left mouse button =.

• Trying to format Vista since the repair screen (command prompt)

  I'm trying to find an ad that says how to format the hard drive of the repair screen during installation. He explained how to format the drive by going to the command prompt while trying to repair the installation. I can access the command prompt, but can't remember the commands I need to reformat the hard drive. Any help would be greatly appreciated.

  You do a Vista repair install of in a Vista operating system running. Unlike the way he did in XP.

  Done formatting part of the installation process:

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  See you soon.

  Mick Murphy - Microsoft partner

• Start icon disappears from the taskbar. Command prompt concludes that he cannot fix corrupted files.

  My power icon disappeared from my taskbar after a reboot. Following the advice of the Forum I turned on command prompt and asked the sfc/scannow.

  After a long search, I received notification that there were a few corrupted files and not all could be fixed. This had occurred previously in 2012.

  After a security alert, security, I downloaded the program named Emet. After reading more below in the Microsoft forum, I found the comments which Emet

  may damage files. I decided to uninstall Emet. When I finished that I discovered that the Emet icon has disappeared from the taskbar along

  with the battery icons and a few other icons. I took my Asus laptop at Best Buy and the tech there called a Microsoft service don't. and

  has got instructions to restore the missing icons using the appropriate record. It was in summer 2012. When I stopped my laptop Sunday, December 21, 13

  and then reopened Tuesday, December 23, 13 I found that, once more, my power icon had disappeared from the notification area. The correspondent

  subprogrammes in the control panel for the management of the icons in the notification area were inoperative for the icon of power and a few others. This

  was the exact situation I had in 2012, about 16 months ago.

  After failing to solve the problem with the command prompt, I thought I would ask for help. For the moment, I managed without going through the power icon

  presented at the center of mobility in the office and after having pinned the control panel to the taskbar on the right.

  Hi Ronald,.

  When you first start a new computer, the operating system typically runs Startup service initializations that can take anywhere from one to six hours to finish, depending on which applications are preloaded on the computer. Make sure that you give the operating system sufficient time to finish these Startup service initializations until you stop or restart the computer. This problem generally not happen once the operating system has completed initialization of all before background services is restarted.

  I suggest you refer to the following article which has a few registry tweaks to solve the problem. Please follow the steps and check out them.

  System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer

  http://support.Microsoft.com/kb/945011/en-us

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link to view the corresponding article:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Let us know the status of the issue. We would be happy to help you.

• Media Center (XP) crashes whenever I try to set up the guide.

  I recently had to re - install WXP MCE and when I go to the installation guide, it crashes as soon as I take my provider each time.  Also, now that I have the signal from the tuner set up, if I try to go to settings, tv guide I'm invited is ongoing I want to continue, or cancel a download

  First you posted a question of Windows XP to a group in Vista

  Why did you have to reinstall, there was an existing problem until you thought that a reinstall would cure? If it was a new installation you also installed the system drivers in the site of PC makers, or the cd drivers. Or you made the mistake of allowing the MSUpdate to install / update the drivers

• Try to set up the network between Windows XP Home edition and Windows Vista Home Premium.

  I had a printer connected to a laptop with window vista home premium that I want to share with my other netbook with Windows xp home.

  two computers connected to a network via a router adsl modem to connect to Internet.

  I put the two WORKING groups on the basis of the same name.

  checked XP network places haven't seen vista pc, I had even impossible windows firewall.

  in Vista PC I put the

  ---> private network location

  ---> all in sharing and discovery are enabled

  I had the two PC but still do not see each other.

  So, what should I do?

  Please help, I don't want to move the printer, nor the computers here and there in order to print something from these two pieces, maybe more with different windows in the future...

  Thank you.

  Kind regards

  Michelle

  Hello

  Maybe this can help.
  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot one

  Re just one example. Your list will focus on how your system is configured.

  ** Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• HP 8660 hard crash when you try to set up the network

  So, the strangest thing happened to my all-in-One printer, apparently without me even not touching.

  We have changed our ISP and had to spend our routers/wireless modems in our apartment. It is - of course - our printer drop the connection to the network - no surprise.

  So the big weird thing is, when I now try to establish a connection to our new network, our hardcrashes printer and needs a reboot (ie. on / turn off the) to the same function again.

  When it crashes I get a brief error message VERY (less than one second - white letters on a BSOD background), after which all the LED lights on the printer starts flashing and the screen tells me that the printer must be powered on/off voltage.

  The code (I tried to catch in the less-than-per-second duration is shown) is: B8409490

  When the printer is connected by wire (LAN), everything works like a charm. Using the copy function works fine as well. But since a cable solution is exactly what we were looking for, any input as to what the problem could be is greatly appreciated!

  PS:

  I tried to reset the settings and the use of the factory through the hidden «menu factory» reset Problem persists.

  Hi Diojr,

  Thanks for your reply and information!

  I'm sorry to see that you receive the error message when you try to connect to your network. I see the wired connection works fine. I noticed that you have already tried a factory reset and the same problem persists.

  If you haven't already done so, I suggest updating the firmware, and then try to reconnect to your network (wireless).

  Please let me know how it works for you!

  Click this link for downloading the Firmware update, select first your operating system and then download:

  Officejet Pro 8600 Firmware update

  Good luck

• I get an "Unable to generate thumbnail" error message when you try to set up the blog using RSS Blog

  error message when you try to install blog using blog rss

  Ok. I managed to remove the two problems at the moment.  Later, I'll try to add the blog.

  Thank you for your help.

• Setting up the synchronization with the new PC - old PC is watered, no key recovery!

  Here's the question. I got a new PC at work today, but before that I did it, I set up sync on the former and synced my bookmarks and history to the cloud.

  Now, I have a new PC, but when I try to set up the synchronization to recover my favorites, it asks me to pair the device or enter the recovery key. I don't have the old appliance to enter the pairing information, and I never had a "key recovery" when I did the initial installation.

  How can I get a key to recovery sent to my E-mail address?

  You can have the recovery key to send you. You can only retrieve password lost (forgotten) of the sync account.

  You should have a backup copy of the key to sync when you initially install Sync.
  
  If you don't do this then the data is lost (the key synchronization is used locally to encrypt data before downloading).

  • https://support.Mozilla.org/KB/Ive-lost-my-Firefox-sync-account-information
  • https://support.Mozilla.org/KB/Firefox-sync-troubleshooting-and-tips