Trying to access a specific clip with a chain

Similar Questions

• I'm trying to access a wireless network with the password provided for me. I get the following error message

  I'm trying to access a wireless network with the password provided for me. I get the following error message: "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 characters ascii or hexadecimal 10 or 26. "what does this error message mean and how do I address so that I can access the wireless network?

  I use XP Professional with service pack 3. I get this error message every other time I try to log in to a protected wireless network security. I used to not get this message; but, now, it may be impossible, sometimes to call all wireless providers when I might only need for a short period or after hours service opening.

  In addition, it is my computer that requires the network password to be different, not the provider of wireless. A password is given to me who works for other users, but my computer won't let me use it.

  Hello

  I suggest you to visit these links and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/the-network-password-needs-to-be-40-bits-or-104/f3fdc3ee-CB40-4107-A632-082093dcdcb8

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/need-to-connect-to-home-wireless-network-Windows/5bf37a22-cc42-4a0f-9d15-83e780f00123

  It will be useful.

• Get the error message "error loading DLL communication" when trying to access Wireless Utility Setup with a LexMark impact S305 printer

  Original title: trying to access Wireless Utility Setup with a printer LexMark impact S305 on windows 7, can nybody help me?

  lxeapss: error loading DLL communication, I get this pop-up box several times trying to access Wireless Utility Setup with printer. I have tried, defrag, virus scan (vipre), stop, went to the Lexmark Web site to get the latest software downlaod for printer?

  Hello

  Click on the link below.

  http://support.Lexmark.com/index?page=content&ID=so4452&locale=en&UserLocale=en_US

  Hope this information helps.

• I have blank page while trying to access the virtual shop with Journ.E tou

  After the update and reset, the page is empty, no access to the virtual store

  as I entered the serial number S / n: PX1530U-1ET1 :-) the correct S / n: this is not used and I don't know how I can fix it with correct password

  What to do about it? Without virtual store shelf is useless.

  Thanks for any solution...

  Post edited by: mirokmiro

  My personal accounts is: 33460

  Can't anyone help me?

  Thank you

• I'm waiting times tries to access a parallel port with VISA

  I get VISA time-out errors when you try to write to the parallel port. MAX said that the port works and I should be able to communicate with him. Device Manager Windows 2000 also said that the device works. I use writing to the parallel port with VISA example I found on the site of nor. To make it even more confusing (or), it runs on one computer but not another. All software and drivers are the same on both machines. On one who gives me the error of time-out, I am able to write to the parallel port using "accesshw".

  What a coincidence. The computer that I had problems with is also a Dell Optiplex. The pins of wiring together the way that you have specified has solved my problem of timeout. The cable I got with just bad has terminals 11 and 12 low attached as indicated on the page with a link to the code sample titled "with the help of VISA to access the Parallel Port in LabVIEW" I know why the original cable worked with a bridge but not a Dell Optiplex. Thanks for the quick fix!

• Trying to access the video clip

  I have a clip on Scene1 called "movieclip1." Inside the "movieclip1", there is a 'fadein' label, which under the label has the fadeing of movie clip in. Then I have a label called 'fadeout', that has the clip fading out.

  What I want to do is get the coding or script of action to do so that when I click on "portfolios_btn" (on scene1) it works what's under my label "fadein" inside the clip 'movieclip1 '.

  Then, when I roll-off clip I want to go and play whats under the label 'fadeout '.

  This 'movieclip1' is a drop down menu that disappears when I click on the portfolios_btn and fades out when I roll off the coast the movieclip.

  You must add event listeners for CLICK and ROLL_OUT event for the portfolios_btn.  In the case of Manager, simply say movieclip1.gotoAndPlay ("...");  where «...» "is the label of the associated image.  If you are not familiar with the addition of a button event listeners, then look for the addEventListener() method in the help documents (or take a peek through a few comments here... it is likely to occur).

• Trying to access Internet Explorer, to get the message to choose a program to open it with

  I'm having a problem with my office. I've been tyring trying to access internet and a message popped up that said I had to choose a program to open this file, so I clicked on internet explore, and I couldn't always access the internet. I also have a message that says windows need to know what program opens a file. I also tried to restore the system and followed the steps, and then a message came that said has he accompanied an andhad problem to stop the system. Also, all the icons have the same image on them they used to have that they have individual photos tried to change icons to original images out there that did not work either. I need help to return to how it was originally. I tried just about everything that I could help him please.

  * original title - need help wth windows xp *.

  Looks like the exe file association is drunk

  Go here download the exe reg patch, unzip the double click on it

  In fact, you can get all themn unzip, and then double-click them

• Trying to access C: I get various error messages. I tried to start with windows 7 Home premium safe mode

  I have several hard drives in my computer. Local disk C: is not available. Disks hard D; E; F; and G work without problem.                             Trying to access C: I get various error messages. I tried to start in safe mode, also tried to use the administrator user and still no luck.

  At some point, I'll get one of the following messages

  My computer ran fine until a week ago. I have I think some how disable the administrator account and disabled drive C:

  (1) error 0 event log x 081000202.

  (2) temporary files for users: (Sean-pc) are limited.

  (3) I need the net administrator authorization.

  (4) C: not available Windows\system32\config.cmd.exe

  Hello

  Problems with the drive in Windows may result from permissions problems, or even corrupt corrupted user accounts.

  1. What is the exact error message you get when accessing drive C?

  Method 1: I suggest you to activate the default Administrator hidden on the computer account and check if it helps.

  Try to activate the built-in Administrator account, follow these steps:

  a. Click Start and type cmd in the box start the search.
  b. in the list of search results, right click Guest and then click Run as administrator.
  c. When you are prompted by user account control, click on continue.
  d. at the command prompt, type net user administrator / Active: Yes and then press ENTER.
  e. type net user administrator , and then press ENTER.
  f. Type exit and press ENTER.
  g. disconnect from the current user account.

  Method 2: Try to take ownership of the drive and check to see if the same problem happens.

  a. right click on the drive and then click Properties.

  b. click the Security tab and then click Edit.

  c. do one of the following:

  ·         To set permissions for a user who is not listed under group or user names, click Add, type the name of the user or group, click OK, select permissions and then click OK.

  ·         To change or remove permissions for a user or an existing group, click the name of the user or group, select the permissions and then click OK.

  For more information, see the article below:

  What to know before applying permissions to a file or a folder:

  http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

  "Access denied" or other errors in the access to or work with files and folders in Windows: http://support.microsoft.com/kb/2623670

  Method 3: Check a drive for errors: http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the doc

  I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the document (replacing the existing document) and close. Then another person can open the same document digitally sign another area of the form, save it, and close it. So on, and so on. Is there a way to do this? At the end of the day, I would end up with a PDF file with literally hundreds of signatures to enable different ACC everywhere...

  I don't understand what the problem is. In the post of the davidr96549424 on May 8, 2015 07:58 you presented a structure of a correct document. Is the issue of the creation of this structure in a PDF file? For this, you will need an Acrobat, not reader.

  XI in Acrobat, select Tools-> forms-Edit. Click 'No' on the form fields 'detect '. In the tasks Panel that opens, click on "add new field". Select "Digital Signature" and move it to the location in the document where you want to than the appearance of the signature to be. Repeat that for signature fields as you want. Users will sign by clicking on the prepared unsigned signature field which shows the dialog box "sign. Do not forget that as TSN has noted that a digital signature applies to the entire document. The entry in the document where it is is irrelevant. Each next signature covers all previous signatures.

  Your users can also sign a document from anywhere that they want without signature fields already prepared. For this select fill & sign-> work with certificates and the type of signing you want to sign up with. A dialog box that will tell you a rectangle for the appearance of signature rises and after you draw the rectangle of the dialog 'Sign' rises.

  PDF/Acrobat doesn't have a limit on a number of signatures in a PDF document. But! Don't forget that when you open a PDF file with Acrobat/Reader signatures valid all of them and takes time (several seconds - until 10 - for every signature), so if you have several signatures of dozens of their validation open can take a long time.

  I don't know how build you your workflow so that each person signs the same PDF and saves it. Economy runs on the same computer where the PDF is stored. You'll have to decide how to allow different people to have access to the same PDF. They, of course, you may sign this only one-at-a-time PDF.

• Suddenly, * only with Firefox * display all the computers in the House (error code: ssl_error_rx_record_too_long) trying to access any Google product.

  Today, all the laptops in the House (last FF ver) started throwing the error:

  (Error code: ssl_error_rx_record_too_long)

  Trying to access any Google products: gmail, Google + Analytics, Google Web site, etc.

  
  

• I am trying to access a site with videos on a daily basis, but there is no playback picture, only sound.

  When I try to access the web page, everything goes smooth, but when I get to video playback, it does not show an image, you can hear the sound of the video playback. I accessed this web site with other web browsers, and it works beautifully, with the image and audio playback. On the same site web, videos work sometimes, but it's very rare, and I don't know what determines this kind of behavior.

  Try disabling hardware acceleration in Flash Player.

  See the videos in Flash will not play in full screen

  • http://www.YouTube.com/swf_test.html (right click on the player: settings)

  Blink the window "display settings":

  • http://www.Macromedia.com/support/documentation/en/flashplayer/help/help01.html

• We get an error "D: / is not accessible." a device i/o error"when trying to access hard drive

  * Original title: e/s problem

  I am not able to access my hard disk.windows that says: -.

  "D: / is not accessible." an i/o device error. "

  I also tried chkdsk but it says that it is not directly operatable.

  Hi Rishanpc,

  Thanks for the post. I am sorry to hear that you found a mistake "D: / is not accessible." a device i/o error"when trying to access hard drive.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

   

   

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. have you checked if the cables are connected properly?

  2 what is an internal hard drive or external?

  3 have there been recent changes made on the computer before the show?

   

  The most common cause of a non-accessible i/o error is a disconnected cable. When the computer tries to access a device, and it's no response after several tests, it will generate this error. Another common cause is when a program tries to access a file that has been removed or eliminated.

   

  Disconnected Hard Drive/cable misconfiguration

   

  Internal hard drives require a specific set up. IDE hard disks can have only one master. If another hard drive has its defining together correctly pin code, a user is perhaps not able to access the data, and he will receive a message that the drive are not available. Cables come off inside the case of the computer also cause a not accessible i/o error. The user can correct this problem by opening the case and attach the data cables for each drive safely at the back of each drive and the motherboard.

   

  You can follow the steps below and check if it helps.

   

   

   

  a. go to "Control Panel" in the start menu and choose 'performance and Maintenance '.

  b. click on 'System' then go to the Hardware tab and click on "Device Manager."

  c. find the device that records an error by developing the appropriate category nodes. If the device has a red "X" on the icon beside its description, the hardware is disabled; Go to step d to activate it. Otherwise, go to step e.

  d. go to the general tab and click on "Activate the device" found in the device status section. then press 'OK '. (Note: you may need to follow the guests, as indicated via an assistant of favorable device.) If you do, continue to click "Next" and follow the instructions until the process is complete.) Test the equipment. If an error is displayed, go to step e.

  e. click the general tab and click "Troubleshooting" found in the device status section and then press 'OK '. Follow the prompts to fix the problem. If an error is still displayed, go to step f.

  f. click the driver tab and click on 'Update driver'. Follow the instructions until the process is complete and then to test the equipment.

   

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• 4 GB Clip with major problems - advice?

  I have a 4 GB Clip silver - he got in November last from Amazon and have enjoyed most of the time.  My only issues before today were random freezes especially at the end of some MP3s (usually 3 or 4 songs out of the 4 GB would freeze the unit whenever they were played).

  Today I load titles from XP machine (using the mode it is drag and drop/explore type) and got a "file of cannot be replaced on the device.» You are not allowed to create this element"message after successfully loading ~ 3 GB of music.   Did not have time to diagnose (apart from a few reboots of the player and my CPU) so I used the Clip for a few hours today, when he had what I thought, it was a typical random freeze.  I'm going to turn on it and all it says is not "enough space for music DB.  Please free 30 MB. "Strange, because I'm sure I had at least 700 MB free and not to mention the fact that I was using it just for a few hours.

  Have a very practical processor Vista I Plug and it is not recognized correctly.  The drive doesn't appear after 15 minutes of freezing Vista - then freezes my CPU when I try to click on it.  I tried to adjust to contain and pressing the Center button while connecting and who did nothing.  I can't do a soft reset as the Player stops immediately after the "not enough space for music DB.

  I just have to try it out on the XP machine - and it takes about 5 minutes to show as a player.  Click on in and after 10-20 minutes, I get this message - "G: / is not accessible."  Beeper has timed out. »

  Is it time to RMA it?  This device has a 1 year warranty?  Thanks in advance for any help.

  I could never make the Clip for you connect to my XP machine.  After dozens of attempts on my Vista computer with lock up ranging from 10 to 40 minutes to an hour trying to access the Clip - I was able to do a quick format and restore my Clip back to normal.  Strange, I wonder what's happened.

• Windows cannot access the specific file, you may not be authorized

  I get a message (windows cannot access the specific file, that you will not

  authorization) it comes to my Bernina software.  I've been using this software for 10 years

  Hello

  Have you tried running the program by right clicking > select run as administrator?

  You want to reinstall using the same method of click with the right button on the install.exe or setup.exe > select run as administrator.

  See you soon.

• When I drop a second video clip with audio in a sequence, how is the 2nd clip will not display or launches its audio track?

  I hope someone can help me with this.  I've just updated to the new CC first pro and when I drag a clip that has audio it displays correctly only audio in the audio track, BUT... when I drag a clip (or even the exact same clip) in the sequence of the audio track is not displayed and cannot be heard or published.  Just to double check, I did a new project, tried to load these two clips in reverse order and it worked the same way.  Only the first loaded track will show that it is the audio track.  When I create a new sequence by using the menus at the top specifically to test this, none of the audio tracks are displayed when the drug on the time line.

  I also tried to load the video in the window source first before I drag it down. Sometimes the source plays audio, sometimes it does not. Anyway the audio still does not appear.

  

  I hope that there is just a shoddy setting, I've turned on.  I know how to do Prime Minister rip the audio output and is it she's own track after the fact, but the whole issue is speed and convenience, and I never had this problem in the old version.  Thanks much for any help.

  Check A1 left the lock.