Trying to access Web Interface WRT54G

Similar Questions

• Cisco SX20 - cannot access web interface after factory reset

  Hi guys,.

  I just did a factory reset on my SX20,

  and now I can't access the web interface, I need to add the key to release

  Basically I can't configure the IP addresses directly through the Executive Director of unity
   
  I need to add the release key and access to any interface
  Help, please!

  SX20 Cisco TC6.3.0

  You can access the settings locally using the remote?

  If so, you should be able the enable http as well as the fixed IP address using the remote control.

  The factory reset should have change setting IP DHCP, so if it has a network connection, this IP address must be included in the top of the page, to the left of the screen.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• Trying to access web https

  Hello: I'm on 4.1.1. I created referece web service WSDL to http and it worked fine (http://www.webservicex.net/CurrencyConvertor.asmx?wsdl). Now, I'm trying to connect to wsdl using https (https://stage.e-verify.uscis.gov/WebService/EmployerWebServiceV23.asmx?wsdl). I went in owm (oracle Wallet Manager) to create a portfolio. The instance of the apex, I pointed out to this portfolio. I just finished the wizard to create a report and the form to a web service, but it does not work.
  
  I hit the test connection, but does not. I used to get an error ACL/portfolio before the implementation of the portfolio and pointing to it. After you set up the portfolio I get more than the error, but no answer no more. I then did the certificate of trust in import in owm to pull into a PKCS #7 file, that I caught on the https site. But I still have no answer. I may try to import BASE64 certificate, but do not expect help.
  
  One thing I notice, is that the user name and password entered when you test the web service reference does not appear in the application. I expect to get a response, even if the username and password are wrong, but I do not have, and they are not yet in the query I see.
  
  Are there examples to set up an https connection using wsdl with apex and wallet?
  
  Thank you, Hawk
  
  Published by: Hawk may 1, 2012 14:29

  It was probably just the version of soap that was causing the problem then.

  Just to let you know, I don't think that you need to import additional certificates for https://stage.e-verify.uscis.gov/ I've tried to the effect that the URL directly from Developer SQL using a freshly created portfolio and it worked fine. This is probably the only sites that use chained certificates where you might have to go to all the problems of import certificates.

• When trying to access web site, it says: err.apache tom cat/6.0.35-err

  Same as above!

  What Web site?

  You will find support for Internet Explorer in this forum: http://answers.microsoft.com/en-us/ie

• Access Web Service via POST - missing parameter

  I'm trying to access web services using the Http Post method, but I'm System.InvalidOperationExeption: missing parameter: ID

  error.

  I can access the Web service using HTTP GET, which shows that there is nothing wrong with the Web Service itself successfully.

  Here is the code I am trying

  String retVal = "";      try       {
  
            String data = "id='25'"; // parameter of the method           URLEncodedPostData encodedData = new URLEncodedPostData(null,false);          encodedData.append("content", data);
  
            byte[] postData = encodedData.getBytes();
  
            HttpConnection connection = (HttpConnection)Connector.open("http://localhost/Service1.asmx/TestService1");            connection.setRequestMethod("POST");          connection.setRequestProperty("Content-type", "application/x-www-form-urlencoded");           connection.setRequestProperty("Content-Length", Integer.toString(postData.length));
  
            OutputStream requestOutput = connection.openOutputStream();           requestOutput.write(postData);            requestOutput.close();
  
            int responseCode = connection.getResponseCode();
  
            String contentType = connection.getHeaderField("Connect-type");           ByteArrayOutputStream baos = new ByteArrayOutputStream();                     InputStream responseData = connection.openInputStream();          byte[] buffer = new byte[1000];           int bytesRead = responseData.read(buffer);                     while(bytesRead >0)            {             baos.write(buffer,0,bytesRead);               bytesRead = responseData.read(buffer);            }         baos.close();         connection.close();           return baos.toString();
  
        }     catch (IOException e)         {         return "ERROR: " + e.getMessage();        }
  

  The line in the "BOLD" throws an exception. HTTP response code I get from server is 500

  Any help would be much appreciated.

  Nitin

  Now, I found the solution.

  The problem was the URLEncodedPostData. If I use just string.getbyte (), it works.

• Help - LI running, but get Apache2 Ubuntu default page while trying to access the Web interface of log insight

  Hello

  I installed the Log Insight 2.5 VM via vCenter Server ESXi 5, 5. I was able to deploy the virtual computer successfully and you can see the network through VAPP Options settings. (Attached picture - TIME settings).

  Question:

  Unable to access LI web Interface. While trying to access the Web interface, I get 'Apache2 Ubuntu by default Page' (img attachment). Insight of the newspaper runs and opens the web application on port 80.

  Newspapers, controlled far-

  status of /etc/init.d/loginsight

  Open a session running Insight

  Attached image Loginsight2-DURATION - file /storage/core/loginsight/var/runtime.log

  # sh li - cassandra.sh - status

  SH: li-cassandra-sh: not found

  Check if the tcp 80 port is open through the netstat command. Yes, it is open.

  Telnet on port 80, it says connection and crashes. Image attached - telnet-LI

  Able to ping the IP address successfully.

  How can I check http logs on console LI?

  I would really appreciate response to this soon. I'm working on installation LI for more than a week and struggling to get through this way.

  Thank you

  Radhika

  I believe that you with the configuration, but I tell you that the configured IP address and the IP you hit in your browser are not still the same IP, Log Insight does not work on Ubuntu, so you hit another system. To prove this, connect you to the console of the Insight newspaper and run:

  # cat/etc/SuSE - release

  SUSE Linux Enterprise Server 11 (x86_64)

  VERSION = 11

  PATCHLEVEL = 2

  You will see that you are running SuSE to see a Ubuntu screen tells me that you have an IP address duplicate in your environment and you hit a node that is not an Insight newspaper. I hope this helps!

• WRT54G V3.0 Web Interface broken after FW update

  I meet the same web interface problem after I updated the firmware, like in the case below, but with my v3.0 WRT54G. The firmware file I upgraded to was WRT54GV4.0_4.21.1_US_code.bin. Will provide you with instructions and decommissioning file name so that I can use the web interface again? I did the steps of resetting, tried a different PC, but get the same problem of web interface. Thanks in advance.

  WRT160nV2 Web Interface broken after FW update. Registration date: 21/05/2009

  Yoohoo!

  Now I know why you have this nickname. Thanks for your help. Problem solved. Web interface works again.

  Must have been the tftp download from the link you provided because I used the same firmware upgrade (WRT54GV4.0_4.21.1_US_code.bin) file I downloaded and tried to install previously.

• WRT54G v4 unusable web interface after firmware update

  I tried to upgrade (actually downgrade) my WRT54G v4 firmware 4.30.11 to 4.21.1. When the progress bar reaches the mark to halfway, I got the message saying that the upgrade was successful. However, now the web interface is so messed up that it is unusable. It's a sign that something went wrong.

  Power, WLAN, Ethernet 1, and Internet lights are all green solid, which should be a good sign. After the upgrade, the web interface says "WRT54G 4.21.1', which is the firmware messed up I am downloading. Browsers, then restart my computer, I have confirmed that it is a router problem, not a problem of the browser cache. I also tried to do a hard reset by pressing the reset for 30 seconds button, unplug the router while holding down the button of reset for 30 seconds and then plug the router while holding down the button of reset for another 30 seconds. This has not fixed anything.

  I encountered a similar problem after an update of the firmware several years ago and the fix to upgrade the firmware using TFTP. This time, however, the TFTP utility could not download the firmware. Using a hack that I found on the internet, I have re - download the 4.21.1 firmware, but the web interface was always messed up. I then downloaded the 4.30.13 firmware. The web interface is still messed up, but then he said "WRT54GL 4.30.13. I then went to the firmware I wanted, WRT54G 4.21.1. The web interface is still screwed up, but said «WRT54G 4.21.1»

  Anyone know how to solve the problem? Yet once, it took place immediately after a firmware update, the web interface is unusable, is not a problem of the browser cache and tried a hard reset.

  Thanks in advance if anyone can help.

  My router model is WRT54G v4. The v4 WRT54G and the WRT54GL are generally considered to be the same device with different model numbers. According to the article of Wikipedia WRT54G, "the WRT54GL is technically a reissue of the version 4 WRT54G."

  I used the firmware 4.30.X for years without problems. However, I decided to switch to the 'right' firmware for my router and something went wrong during the upgrade.

  I solved the problem. I basically just dropped the Linksys firmware and uploaded the DD open source-WRT firmware mini instead. Now everything works fine.

• Access the interface user Web de VMware Server 2 will crash Firefox 3.5

  Hello

  Trying to access the web interface installation of VMware Server 2 running on Enterprise Linux 5 update 2 64-bit

  using Mozilla Firefox 3.5 on XP causes Firefox to crash.

  Previous Firefox 3.0.11 version was able to connect and log in successfully.

  Everything in FF 3.5 cach has been deleted before trying to access the user interface. In addition, the certificate has also been removed before.

  When you access the UI first with 3.5 ist ask to accept the certificate (identical to 3.0.11)

  This will result in a blank page is displayed.

  Closing FF 3.5 (clear cache included) and re-open it at the interface of the web UI that causes FF crash.

  I m the only one to see this problem with the new Firefox 3.5 access to VMware Server 2 Web UI?

  Kind regards

  Agent of

  Although VMware-server - 2.0.1 - 156745.x86_64 has been out for a while, so I just assumed it was your version.

  Silly me

  Hope that cure your problem.

• I get a 403-Forbidden: access denied message when trying to access my email in Microsoft Outlook Web App

  I use Firefox version with an OS Ubuntu LTS 14.04 33.0. I get a 403-Forbidden: access denied message when trying to access my mail from Microsoft Outlook Web Access (OWA). When I use another computer running version 33.1.1 Firefox with a Windows 7 operating system, I can access my email in Microsoft Outlook Web App perfectly. Anyone have any suggestions on how to get my Firefox browser on the Ubuntu machine to be able to access my email on OWA?

  This problem may be caused by corrupted cookies or cookies that are blocked.

  • Check the permissions on the subject: permissions page and in "tools > Page Info > Permissions.
  • https://support.Mozilla.org/KB/fix-login-issues-on-websites-require-passwords

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Edit > Preferences > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Edit > Preferences > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• When you click Web sites my Avast 5.0 antivirus warns me that a malicious URL tries to access my system or that a Trojan horse was prevented access. Malware/Trojan attempt is always of the same address:[Ticon.in/nte/kuz/.exe/xhdoe515bvo3

  Suspect Maleware / Trojan.

  This has happened

  Each time Firefox opened

  == I tried to access a website

  Hello Dave deaf.

  It is possible that you have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?

  Whenever you have a problem with Firefox, whatever it is, you must make sure that it is not caused by one (or more) of your installed modules, whether an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode (remember to select disable all add-ons when you start safe mode). If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and theme and this one for plugins.

  If you need help with one of your modules, you will need to contact the author.

  In addition, it is possible that your system is infected by malicious software. To search for malicious software, install, update and run these programs in this order. They are all free for personal use, some have limited functionality in their 'free mode', but the features you won't miss are not really necessary to find and remove the problem you have. Remember that not all programs detect the malware even!

  Malwarebytes' Anti-Malware - malwarebytes.org/mbam.php
  SuperAntispyware - superantispyware.com
  AdAware - lavasoftusa.com/software/adaware
  Spybot Search & Destroy - safer-networking.org/en/index.html
  Windows Defender - microsoft.com/windows/products/winfamily/defender/default.mspx
  Dr Web Cureit - freedrweb.com/cureit

  If they can't find it or cannot erase it, please tell me and I will provide you with further assistance.

• LaserJet p1102w: how to access the interface web printer with new router

  I just bought a new wireless router, hoping that I'll be able to more easily print with my p1102w.

  Internet access works ok desktop and laptop (wireless).

  However, I had bookmarked the IP address of my printer, and before, I've always been able to access it by clicking on the bookmark. I checked the range of IP addresses for the router, and the IP of the printer is outside this range, so I don't know why I am no longer able to access to this. I can't access the web interface, whether they come from my laptop or desktop (wired). However, the printer is capable of printing from the desktop without problem.

  How do I enter this? I would like to restart the configuration wireless configuration, but I thought I needed the web interface for this.

  I should just insert the CD? I made a tweak or two and would prefer to keep all the settings of the printer even if I can, but I can start all over again if I have to.

  
  HP LaserJet p1102w

  I just deleted the printer on my laptop computer, reset the settings of the printer default and then run Setup from the wired desktop wireless utility wireless. Seems to have worked, I can now access the web interface via my laptop now.

• Access SupportAssist web interface from another computer?

  Hello

  I installed the Version 1.3.0.148 of SupportAssist for servers and I can't access the web interface from another computer, only from the server I have installed.

  I could not find in something configuration files allow only localhost.

  Is it possible to make the web interface available to other computers on the same LAN?

  Thank you

  Version 1.3.0.148 for servers

  Hello

  You can also access the SupportAssist on a remote system if the 2607 port is open on the system where the SupportAssist is installed.

  You can use the following URL to access help support

  https://

  installed >: 2607/SupportAssist

  Hope this helps

  Thank you

  Christelle

• N3048 access to the Web Interface without OOB

  I recently had our switch replaced by RMA and have access to the web interface via oob. I'm not sure how to access ports and other subnets and want to access the web interface of the server room outside. It's probably something very obvious, but I don't have the original switch to check the configuration. Any help would be appreciated. Thank you.

  You can use in-band or oob access to administration from inside or outside the server room.  The port of oob is a completely separate network used for management only, but you can also use a port in the Strip management.  By default, VLAN 1 is usually used in the Strip to transport of management traffic.  If you set an IP address on VLAN 1 you should also be able to manage from this IP address.  Measures would be to define the IP address on VLAN 1, ping ping to test connectivity, remote and then use your browser to connect to the web INTERFACE.  You should be able to use the same username/password that was used for the oob port.  Without a set of name of user and password, the web INTERFACE will not allow the session.

  B

• PC54x8 access to the web interface of WS2012

  Hello. We have a strange problem. Because we are not networking gurus, we use the web interface of the switches to manage them (instead of using the CLI). The problem is that when connect us to the web interface of WS2012, the browser (IE) freezes. We tried this on several machines of WS2012.

  Management of WS2008 R2 works without problem.

  Is this a compatibility issue with IE10 (WS2012) compared to IE9 (WS2008 R2) or something else? I tried to add the address IP for trusted sites, but that did not help. Unfortunately only the servers with WS2012 are connected to this particular switch, so we are unable to manage it more (from the web interface).

  Any ideas what could be the cause of this? The web interface requires Java? Given that we have not installed on WS2012 servers.

  Unfortunately I found no work around to get the software to work with IE10. The recommended solution is to use another browser, which as you've found, works very well. I believe that the idea is that in future updates that IE10 will be supported, but I don't have a roadmap on how that would be released.