Similar Questions

• Trying to access Web Interface WRT54G

  Hi all.

  I have a Linksys WRT54G, and I try to access the Web Interface of the router. The problem I have is that whenever I try to access the Web Interface, the router stops internet connection for all devices connected to them, they are wired or wireless broadcasting. The only way for me to find the internet connection is to insert the SetupWizard disc and go back through setting all things.

  I need to access the Interface so that I can enable port forwarding.

  Any help would be greatly appreciated. Thanks in advance.

  Are you sure your firewall on the computer (including the Windows Firewall) is off?  Some firewall is very difficult to put out.  In addition, disable your pop-up Blocker.

  To make an update of the firmware (or re-install), you will need to use the tftp.exe program.  The instuctions throughout the proceedings (including the tftp.exe info) can be found here:

  http://Linksys.custhelp.com/cgi-bin/Linksys.cfg/php/enduser/std_adp.php?p_faqid=3703&p_created=11515...

  After the installation of the firmware, don't forget to reset the default router, and then configure the router again from scratch.

• When trying to access web site, it says: err.apache tom cat/6.0.35-err

  Same as above!

  What Web site?

  You will find support for Internet Explorer in this forum: http://answers.microsoft.com/en-us/ie

• Access Web Service via POST - missing parameter

  I'm trying to access web services using the Http Post method, but I'm System.InvalidOperationExeption: missing parameter: ID

  error.

  I can access the Web service using HTTP GET, which shows that there is nothing wrong with the Web Service itself successfully.

  Here is the code I am trying

  String retVal = "";      try       {
  
            String data = "id='25'"; // parameter of the method           URLEncodedPostData encodedData = new URLEncodedPostData(null,false);          encodedData.append("content", data);
  
            byte[] postData = encodedData.getBytes();
  
            HttpConnection connection = (HttpConnection)Connector.open("http://localhost/Service1.asmx/TestService1");            connection.setRequestMethod("POST");          connection.setRequestProperty("Content-type", "application/x-www-form-urlencoded");           connection.setRequestProperty("Content-Length", Integer.toString(postData.length));
  
            OutputStream requestOutput = connection.openOutputStream();           requestOutput.write(postData);            requestOutput.close();
  
            int responseCode = connection.getResponseCode();
  
            String contentType = connection.getHeaderField("Connect-type");           ByteArrayOutputStream baos = new ByteArrayOutputStream();                     InputStream responseData = connection.openInputStream();          byte[] buffer = new byte[1000];           int bytesRead = responseData.read(buffer);                     while(bytesRead >0)            {             baos.write(buffer,0,bytesRead);               bytesRead = responseData.read(buffer);            }         baos.close();         connection.close();           return baos.toString();
  
        }     catch (IOException e)         {         return "ERROR: " + e.getMessage();        }
  

  The line in the "BOLD" throws an exception. HTTP response code I get from server is 500

  Any help would be much appreciated.

  Nitin

  Now, I found the solution.

  The problem was the URLEncodedPostData. If I use just string.getbyte (), it works.

• Can't access web page from the application of vRO with Firefox 39.0

  I tried to access to https://IPAddress:8281 / vco / and all of a sudden I'm greeted with the following error:

  An error occurred during a connection to ipaddress:8281. SSL has received a low ephemeral Diffie-Hellman key in the handshake message exchange the server key. (Error code: ssl_error_weak_server_ephemeral_dh_key)

  I think that Firefox updated itself between now and the last time I tried to access the web page.

  I checked the release notes for version 39 and I see this: remove support for SSLv3 unsecured for communications network

  -What is the source of the problem? Does anyone else have this problem?

  The problem is that SSLv3 and some suites of encryption used in vRO devices are now considered not secure and some applications for example. Firefox started blocking them.

  Following are the result of encryption currently configured in vRO 6.x:

    TLS_DHE_RSA_WITH_AES_256_CBC_SHA
    TLS_DHE_DSS_WITH_AES_256_CBC_SHA
    TLS_RSA_WITH_AES_256_CBC_SHA
    TLS_DHE_RSA_WITH_AES_128_CBC_SHA
    TLS_DHE_DSS_WITH_AES_128_CBC_SHA
    TLS_RSA_WITH_AES_128_CBC_SHA
  

  Those who have DH on their behalf (Diffie-Hellman) should be disabled (4 of 6). The easiest way is to remove from the list of encryption algorithms in the following files:

    /etc/vco/app-server/server.xml  (vRO server)
    /etc/vco/configuration/server.xml  (vRO configurator)
  

  After removing the unsecured encryption, you may need to restart vRO. Now you should be able to connect to the vRO device using Firefox 39.

• I get a 403-Forbidden: access denied message when trying to access my email in Microsoft Outlook Web App

  I use Firefox version with an OS Ubuntu LTS 14.04 33.0. I get a 403-Forbidden: access denied message when trying to access my mail from Microsoft Outlook Web Access (OWA). When I use another computer running version 33.1.1 Firefox with a Windows 7 operating system, I can access my email in Microsoft Outlook Web App perfectly. Anyone have any suggestions on how to get my Firefox browser on the Ubuntu machine to be able to access my email on OWA?

  This problem may be caused by corrupted cookies or cookies that are blocked.

  • Check the permissions on the subject: permissions page and in "tools > Page Info > Permissions.
  • https://support.Mozilla.org/KB/fix-login-issues-on-websites-require-passwords

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Edit > Preferences > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Edit > Preferences > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Cannot access the Web http sites

  Since yesterday, I have not been able to access any site that begins with http://, only Web sites that begin with https://. I do not download anything anything beforehand, it was working fine in the morning, but I came home in the afternoon and it did not work. No one else has used the computer. I can't go to these Web sites on firefox, safari or google chrome. I tried to unplug my router, clear the cache, history and cookies from my browser, resetting the computer, update the computer and the browser, use OpenDNS, but nothing works. I installed HTTPS Everywhere, that allows me to go on a site that wouldn't work before, but most of the websites that I use usually will not work.

  I'm lost for what to do, so any help would be appreciated.

   / System Preferences / network / advanced / proxies / then deselect "proxy web http.

• Get the status of the Http 404 error while trying to access dyn/admin

  Using Weblogic server to deploy the application. What server starts to become less than error and 404 error when trying to access the dyn/admin.

  storefront works well and I am able to access the application without any problem.

  SEVERE: javax.servlet.ServletException: * ERROR: could not get the ServletContext for atg_bootstrap.war. Lack of start-up NucleusServlet. (/ dyn, zero)

  javax.servlet.ServletException: * ERROR: could not get the ServletContext for atg_bootstrap.war. Lack of start-up NucleusServlet. (/ dyn, null)

  at atg.nucleus.servlet.NucleusServlet.initBigEarNucleus(NucleusServlet.java:843)

  at atg.nucleus.servlet.NucleusServlet.init(NucleusServlet.java:465)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletInitAction.run (StubSecurityHelper.java:337)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletInitAction.run (StubSecurityHelper.java:288)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.provider.WlsSubjectHandle.run(WlsSubjectHandle.java:57)

  at weblogic.servlet.internal.StubSecurityHelper.initServletInstance(StubSecurityHelper.java:98)

  at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:86)

  at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:74)

  to weblogic.servlet.internal.StubLifecycleHelper. < init > (StubLifecycleHelper.java:60)

  to weblogic.servlet.internal.StubLifecycleHelper. < init > (StubLifecycleHelper.java:34)

  at weblogic.servlet.internal.ServletStubImpl.initStubLifecycleHelper(ServletStubImpl.java:652)

  at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:593)

  at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1924)

  at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1901)

  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1791)

  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:2807)

  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1661)

  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:822)

  to weblogic.application.internal.ExtensibleModuleWrapper$ StartStateChange.next (ExtensibleModuleWrapper.java:360)

  to weblogic.application.internal.ExtensibleModuleWrapper$ StartStateChange.next (ExtensibleModuleWrapper.java:356)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)

  at weblogic.application.internal.ExtensibleModuleWrapper.start(ExtensibleModuleWrapper.java:138)

  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:124)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:213)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:208)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:70)

  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:24)

  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:729)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)

  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:258)

  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:61)

  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:165)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:222)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:414)

  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)

  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)

  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)

  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:191)

  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:99)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:295)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:254)

  January 11, 2015 08:31:35 java.util.jar.Attributes read

  WARNING: Duplicate name in manifest: name.

  Make sure that the manifest has no duplicates, and

  blank lines to separate different sections at the same time your

  manifest and in the META-INF/MANIFEST. Entry in the jar of MF.

  Below is the web.xml file

  <? XML version = "1.0"? >

  < ! DOCTYPE web - app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3 / / IN" "http://java.sun.com/dtd/web-app_2_3.dtd" > ""

  " < web - app xmlns =" http://Java.Sun.com/XML/NS/JavaEE "

  " xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "

  " xsi: schemaLocation =" http://Java.Sun.com/XML/NS/JavaEE http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"" "" "

  version "2.5" = >

  < display name > ATG Application < / display-name >

  < description > year Application ATG < / description >

  <!--

  It's the name and value of the "web application parent ', which is the name

  a web application, which has a defined in SessionNameContextServlet

  who will define the scope of session for this web application.

  This definition is commented out here in the 'main' web application, but

  You can copy this init param control in a web application to child who

  I wanted to share the same session with this servlet scope.

  ->

  < context-param >

  atg.session.parentContextName < param-name > < / param-name >

  < param-value > / dyn < / param-value >

  < / context-param >

  < context-param >

  atg.dafear.bootstrapContextName < param-name > < / param-name >

  < param-value > / dyn < / param-value >

  < / context-param >

  <!--

  If the context root is defined here, then ServletContextWebAppRegistry will use

  This parameter as the root of context to this WebApp.  It must correspond to

  the context parameter root in application.xml.

  ->

  < context-param >

  root of context of < param-name > < / param-name >

  twodegree < param-value > < / param-value >

  < / context-param >

  <!--

  ATG. Assemble context parameter indicates that we want to run the

  AssemblerPiplineServlet that will use the assembler api to return the content

  Since the Manager of the experience or the guided search.

  ->

  < context-param >

  ATG.assembler < param-name > < / param-name >

  < param-value > true < / param-value >

  < / context-param >

  < context-param >

  atg.filter.PageFilterDebug < param-name > < / param-name >

  < param-value > false < / param-value >

  < / context-param >

  <!-< filter >

  < filter-name > PageFilter < / filter-name >

  > class filter < atg.filter.dspjsp.PageFilter < / class filter >

  < / filter >

  < filter mapping >

  < filter-name > PageFilter < / filter-name >

  *.jsp < url-pattern > < / url-pattern >

  < / filter-mapping >->

  <!--

  Called when a request is a .jsp file, the PageFilter servlet is

  the entry point into the DAF pipeline. PageFilter calls

  ATG/dynamo/servlet/dafpipeline/DynamoHandler to start the servlet DAF

  pipeline for JSP applications. The pipeline of servlet DAF builds on JBoss

  to manage the page compilation process in its entirety.

  ->

  < filter >

  < filter-name > PageFilter < / filter-name >

  > class filter < atg.filter.dspjsp.PageFilter < / class filter >

  < / filter >

  < filter >

  < filter-name > ForwardFilter < / filter-name >

  > class filter < atg.servlet.ForwardFilter < / class filter >

  < / filter >

  < filter >

  < name of filter > ErrorFilter < / filter-name >

  > class filter < atg.servlet.ErrorFilter < / class filter >

  < / filter >

  < filter mapping >

  < name of filter > ErrorFilter < / filter-name >

  < url-pattern > / * < / url-pattern >

  < distributor > ERROR < / dispatcher >

  < / filter-mapping >

  < filter mapping >

  < filter-name > ForwardFilter < / filter-name >

  < url-pattern > / * < / url-pattern >

  < distributor > BEFORE < / dispatcher >

  < distributor > ERROR < / dispatcher >

  < / filter-mapping >

  < filter mapping >

  < filter-name > PageFilter < / filter-name >

  < url-pattern > / * < / url-pattern >

  < distributor > APPLICATION < / dispatcher >

  < distributor > ERROR < / dispatcher >

  < distributor > BEFORE < / dispatcher >

  < / filter-mapping >

  <!--

  Configure the core Servlet. This servlet definition is required

  in each web application that uses the functionality of the dynamo.  When mapped.

  It exposes the browser kernel component, but should not be

  mapped to the paths on a site online.

  ->

  < servlet >

  < name servlet - > NucleusServlet < / servlet-name >

  > the servlet class < atg.nucleus.servlet.NucleusServlet < / servlet-class >

  < load-on-startup > 1 < / load-on-startup >

  < / servlet >

  <!--

  This servlet exposes the dynamo as a servlet server administrator in your

  application server.  It is not necessary, but useful for access to the

  core component browser, the dynamo configuration manager, and

  performance monitor

  ->

  < servlet >

  < name servlet - > AdminProxyServlet < / servlet-name >

  > the servlet class < atg.nucleus.servlet.NucleusProxyServlet < / servlet-class >

  < init-param >

  proxyServletPath < param-name > < / param-name >

  < param-value > / atg/dynamo/servlet/adminpipeline/AdminHandler < / param-value >

  < / init-param >

  < load-on-startup > 2 < / load-on-startup >

  < / servlet >

  <!--

  This servlet presents the dynamo servlet pipeline.  It is necessary if

  you want to support the JHTML portion on your site pages.  The path of the context

  and servlet path used by this servlet are added on all URLs

  for JHTML pages on your site.

  ->

  < servlet >

  < name servlet - > DynamoProxyServlet < / servlet-name >

  > the servlet class < atg.nucleus.servlet.NucleusProxyServlet < / servlet-class >

  < load-on-startup > 2 < / load-on-startup >

  < / servlet >

  <!--

  This servlet must be defined in each web application that is named

  as a 'major' web application (i.e. its context name is the value of)

  setting atg.session.parentContextName to another web application).

  It is usually the dyn.ear web app.

  ->

  < servlet >

  < name servlet - > SessionNameContextServlet < / servlet-name >

  > the servlet class < atg.nucleus.servlet.SessionNameContextServlet < / servlet-class >

  < / servlet >

  <!--

  This servlet handles requests for special session-init issued by CCA

  and the caliber e-mail system.

  ->

  < servlet >

  < name servlet - > InitSessionServlet < / servlet-name >

  > the servlet class < atg.nucleus.servlet.InitSessionServlet < / servlet-class >

  < / servlet >

  <! - utaku redirection of payment - >

  < servlet >

  < name servlet - > TwoDPaymentProcessServlet < / servlet-name >

  > the servlet class < com.twodegree.commerce.order.payment.servlet.TwoDPaymentProcessServlet < / servlet-class >

  < / servlet >

  < servlet-mapping >

  < name servlet - > TwoDPaymentProcessServlet < / servlet-name >

  <>url-pattern/MCO/withdrawal/payment/olsPayCCRequest < / url-pattern >

  < / servlet-mapping >

  <!--

  You can enable this for diagnostic purposes in case you have trouble

  other marketing services, you can go directly to the core.  It will be

  You can directly access the Component Explorer.  He

  is no authentication on this so do not not for an online site.

  < servlet-mapping >

  < name servlet - > NucleusServlet < / servlet-name >

  < url-pattern > /noyau / * < / url-pattern >

  < / servlet-mapping >

  ->

  <!-server admin to exposes dynamo->

  < servlet-mapping >

  < name servlet - > AdminProxyServlet < / servlet-name >

  < url-pattern >/Admin / * < / url-pattern >

  < / servlet-mapping >

  <!--> pipeline of exposes dynamo to serve pages DSP

  < servlet-mapping >

  < name servlet - > DynamoProxyServlet < / servlet-name >

  < url-pattern > /dyn / * < / url-pattern >

  < / servlet-mapping >

  < servlet-mapping >

  < name servlet - > InitSessionServlet < / servlet-name >

  <>url-pattern / init-session < / url-pattern >

  < / servlet-mapping >

  <! - ContextLoaderListener spring - >

  <>earpiece

  org.springframework.web.context.ContextLoaderListener <-listener class > < / listener class >

  < / earphone >

  <!-spring-> application configuration file location

  < context-param >

  contextConfigLocation < param-name > < / param-name >

  /Web-INF/spring-context.XML < param-value > < / param-value >

  < / context-param >

  < Welcome-file-list >

  index.jsp welcome < file > < / welcome-file >

  < / Welcome-file-list >

  < jsp-config >

  < jsp-property-group >

  *.jsp < url-pattern > < / url-pattern >

  encoding-> < UTF-8 < / encoding of page >

  < invalid script > false < / invalid scripts >

  /includes/prelude.jspf < include prelude > < / include-prelude >

  < / jsp-property-group >

  < / jsp-config >

  < / web - app >

  <!--@version $Id: //product/Eclipse/main/plugins/atg.project/templates/web.xml#1 $$ change: $425088->

  Hello

  Check if the atg_admin.war is present in your ear.

  If not then DafEar.Admin module is not picked up correctly and the ear does not correctly.

  Try to make the ear using the CIM and not by the runassembler command.

  Kind regards

  Prateek Gupta

• Help - LI running, but get Apache2 Ubuntu default page while trying to access the Web interface of log insight

  Hello

  I installed the Log Insight 2.5 VM via vCenter Server ESXi 5, 5. I was able to deploy the virtual computer successfully and you can see the network through VAPP Options settings. (Attached picture - TIME settings).

  Question:

  Unable to access LI web Interface. While trying to access the Web interface, I get 'Apache2 Ubuntu by default Page' (img attachment). Insight of the newspaper runs and opens the web application on port 80.

  Newspapers, controlled far-

  status of /etc/init.d/loginsight

  Open a session running Insight

  Attached image Loginsight2-DURATION - file /storage/core/loginsight/var/runtime.log

  # sh li - cassandra.sh - status

  SH: li-cassandra-sh: not found

  Check if the tcp 80 port is open through the netstat command. Yes, it is open.

  Telnet on port 80, it says connection and crashes. Image attached - telnet-LI

  Able to ping the IP address successfully.

  How can I check http logs on console LI?

  I would really appreciate response to this soon. I'm working on installation LI for more than a week and struggling to get through this way.

  Thank you

  Radhika

  I believe that you with the configuration, but I tell you that the configured IP address and the IP you hit in your browser are not still the same IP, Log Insight does not work on Ubuntu, so you hit another system. To prove this, connect you to the console of the Insight newspaper and run:

  # cat/etc/SuSE - release

  SUSE Linux Enterprise Server 11 (x86_64)

  VERSION = 11

  PATCHLEVEL = 2

  You will see that you are running SuSE to see a Ubuntu screen tells me that you have an IP address duplicate in your environment and you hit a node that is not an Insight newspaper. I hope this helps!

• When you click Web sites my Avast 5.0 antivirus warns me that a malicious URL tries to access my system or that a Trojan horse was prevented access. Malware/Trojan attempt is always of the same address:[Ticon.in/nte/kuz/.exe/xhdoe515bvo3

  Suspect Maleware / Trojan.

  This has happened

  Each time Firefox opened

  == I tried to access a website

  Hello Dave deaf.

  It is possible that you have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?

  Whenever you have a problem with Firefox, whatever it is, you must make sure that it is not caused by one (or more) of your installed modules, whether an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode (remember to select disable all add-ons when you start safe mode). If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and theme and this one for plugins.

  If you need help with one of your modules, you will need to contact the author.

  In addition, it is possible that your system is infected by malicious software. To search for malicious software, install, update and run these programs in this order. They are all free for personal use, some have limited functionality in their 'free mode', but the features you won't miss are not really necessary to find and remove the problem you have. Remember that not all programs detect the malware even!

  Malwarebytes' Anti-Malware - malwarebytes.org/mbam.php
  SuperAntispyware - superantispyware.com
  AdAware - lavasoftusa.com/software/adaware
  Spybot Search & Destroy - safer-networking.org/en/index.html
  Windows Defender - microsoft.com/windows/products/winfamily/defender/default.mspx
  Dr Web Cureit - freedrweb.com/cureit

  If they can't find it or cannot erase it, please tell me and I will provide you with further assistance.

• QT: How to access the HTTPS Web site?

  There are specialized libraries necessary to deploy to access websites https with QNetwork and Playbook?

  I always have error 6.

  Others also have problems with this?

  Have you tried to connect the signal of SSLErrors and see what error? If the error is not important, you can tell Qt to ignore the SSL error

  check this: http://doc.qt.nokia.com/4.7-snapshot/qnetworkaccessmanager.html#sslErrors

• Latest version of Firefox (version 32) cannot access web sites. Using Windows 8.1 compatibility issues?

  Firefox will automatically update to the latest version which is now the 32 version. I get the following error message: "Firefox can't find the server at us.data.toolbar.yahoo.com"preceded by "Sever not found" what is happening on any site web I'm trying to access. Reload version 31 Firefox works fine, but then it will be updated again.

  Windows 8.1 is my operating system.

  The latest version is 31.0 Firefox as the only way you would be updated to the current Beta build, which is Firefox 32.0b2 (b2 = Beta 2 as you can say six to 12 beta) build is if you were on the beta channel because of you install a beta version and that he continued to use it since. If you have installed the Firefox 31.0 is upgrade to 32.0b2 then the 31.0 you have installed is a Beta version (make sure the name of the file has not had to say 31.0b# because there were nine of betas) and not the Firefox 31.0 release say mozilla.org or https://www.mozilla.org/en-US/firefox/all/

  The typical reason for a new version (Windows) being not not able to connect after a new major version of Firefox update or install is usually due to a software firewall does not block the new .exe but it can stll have the previous version allowed.

  • https://support.Mozilla.org/en-us/KB/Firefox-cant-load-websites-other-browsers-can
  • https://support.Mozilla.org/en-us/KB/configure-firewalls-so-Firefox-can-access-Internet

• Increasing problems to access web pages in Safari or Chrome

  Hello. I have a Mac Mini 2.5 GHz, 4 GB RAM, 500 GB HD; running Mac OS x 10.11.2; Safari 9.0.2; Sophos AntiVirus Home Edition 9.4.1; Chrome 49.0.2593.0 dev (64-bit).

  Several months ago, I started to have problems of access to some web sites, namely OpinionWorld and your voice. I would get an email from them with a link, like http://dkr1.ssisurveys.com/projects/start?psid=s_LXqAJmxx3JVOk_yTSTvgBEHjCAUQLr>, and when I went to access I got error:

  400 bad request

  Your browser has sent an invalid request.

  so that I could access these sites from my mother did investigations using his computer and Windows 10 machine. I had the same problems in Safari or if I pasted the links in Chrome. After some time I also started having problems with other websites such as Amnesty International. I would like to click on a link such as al http://www.amnesty.org.au/action/action/41035/?utm_source=FBPAGE&utm_medium=soci & utm_content = 20151220043000 & utm_campai... > and he'd make the same error 400 Bad request. I took it to the Genius Bar for an appointment and after a long period it check and tries to connect to some of these sites from another Mac and my mom on my Mac Mini account, that the Apple employee said it was a problem with sites and not with my computer, but problems encounter on the other computer and even on my mother's account were different. On the other machine, it seemed that someone else had bought the areas OpinionWorld and your voice and I forgot what happened account of my mom, but it wasn't a 400 error. Also, it didn't explain why I was able to access it on a Windows 10 using Chrome for Windows machine. Also, it was just the links OpinionWorld and your voice, not links to Amnesty International etc.

  Sometimes, I would have similar problems with other sites. Sometimes I could open in Chrome but not Safari, or if I clicked on the link it won't work but if I pasted the link and press return it would work. More recently, I was not able to access the site with Safari iTunes feedback feedback/itunesapp.html >, he just said:

  Bad request

  Your browser has requested that this server could not understand.

  Reference #7.ebb7d117.1450593610.0

  I receive for several sites these last time. Also although when I accessed this site through Chrome, it worked, when I had finished my comments he tried to go to http://www.apple.com/feedback/itunesapp_thankyou.html> where he got another 400 error but when I went there now it worked.

  Also when I tried to access the first link in this post just recently I received:

  403 Forbidden

  Request prohibited by law.

  in Safari. Previously I would have uninstalled and re-installed Safari and Chrome, but apparently it is like an option with Safari.

  Can anyone suggest what should I do then? Thank you for your consideration.

  Can anyone suggest what should I do then?

  He doesn't know what is the problem but "Sophos" is capable of anything beneficial and his presence will only complicate troubleshooting. Remove it. Back up your Mac before making changes to its file system.

  Use the Remove Sophos Anti-virus program. It will be installed in the Applications folder on your Mac, unless you have moved or deleted. In this case, follow the instructions in uninstalling here: https://www.sophos.com/support/knowledgebase/122710.aspx. Ensure that its eradication is complete and irrevocable from your system. Do not reinstall, or something like that. Only then will you be able to solve the problems you are having.

• WRT110 still not access web utilities without reset

  http://homecommunity.Cisco.com/T5/wireless-routers/unable-to-access-router-admin-page/m-p/293835/HIG...

  Existing for a long time, that IE8 lightened temporarily problem (actually only for a day or two).

  Router needs to be reset to display the web online utility. Any version of Windows or IE. With and without A / v and firewall. Tried MANY variables.

  This router will not access advanced settings utility web pages no matter what I do, unless it is in power, power off, then on again.

  Once I get this problem straightened out, I can answer another: my new netbook unable to get Internet at home with my password. It requires the loss of connectivity to the desktop connected when I try.

  But I really need to know what I'm doing wrong, why I can NEVER get the admin pages online without power the router off tension.

  Please guide me.

  Well I keep reading on the problems caused by updating the firmware of the router so I hesitate.

  I think I can have thought of it.  I'm crazy, that's what was causing it in this case.  IWAS using the Mac address filtering, but which became a pain because I work on friends and required to have computers to enter their mac address. Then I disabled the mac address filtering.  I know that was off since mid-June, at least, but had not tried to access the routers Web pages since then.  The mac addresses that have been allowed are still there, but the filtering turned OFF / disabled.

  Yesterday I re-enabled mac address filtering and here I can not only access the router using EasyLink Advisor Web pages but, once I entered the mac of my addy netbook, it can get on the internet without problem and it does not address to renew (which caused my Wired desktop to lose connectivity).

  UGH!  SO I mean if you once used the mac address filtering and turned it turned off/disabled it, you must remove those addresses from this page online. Of course, I didn't know that, but now that it is reactivated I can get in.

  I can access the router admin do pages without problem now, no reset.  And my netbook can now proceed without problems.  The two issues were linked.

  So this is resolved for now.

• Get the error message "error loading DLL communication" when trying to access Wireless Utility Setup with a LexMark impact S305 printer

  Original title: trying to access Wireless Utility Setup with a printer LexMark impact S305 on windows 7, can nybody help me?

  lxeapss: error loading DLL communication, I get this pop-up box several times trying to access Wireless Utility Setup with printer. I have tried, defrag, virus scan (vipre), stop, went to the Lexmark Web site to get the latest software downlaod for printer?

  Hello

  Click on the link below.

  http://support.Lexmark.com/index?page=content&ID=so4452&locale=en&UserLocale=en_US

  Hope this information helps.