Problem when adding 2nd host in Iscsi storage shared

Similar Questions

• Nested ESXi - problem when adding the cloned ESXi hosts to the same data center in vCenter

  Hi all

  I installed a VM ESXi5.5 on top of WOrkstation10 and made a clone of it. Two of them are accessible and functioning very well themselves.

  However, when trying a add these hosts to vCenter, he begins to complain that:

  "Data store"datastore1"is in conflict with a store of data that exists in the data center which has the same url.

  and will not let me add the second host. Is there a way to fix this?

  Any help would be appreciated...

  Try to delete the local data store and re-create it.

• Problem when adding a sensor to IDS MC

  Hi all

  Any body has encountered the problem I'm facing here? I add 4 sensors to my MC IDS (2.2) and I get an error message when I tried to add the third argument, I clicked on (see the message) and I got the output attached... Please tell us how can I troubleshoot/fix this problem...

  Appreciate your cooperation...

  Concerning

  Regenerate the certificate of the probe. Usually, it is because the certificate of the probe has expired. Then return to IPS MC and add the sensor.

  For sensor 5.x through IDM:

  Configuration > Configuration sensor > Certificates > certificate server

  Click on generate the certificate

  For sensor 4.x through IDM:

  Device > sensor configuration > certificate > generate certificate of host

  Click on apply for sensor

• Problem when adding a photo of fireworks in Dreamveaver

  Hello

  I am new to Adobe products, but like them a LOT.

  However, I have a problem.

  I have a picture that I dealt in Fireworks CS4: I added a vector Auto mask (gradient to transparency).

  I am now trying to export this picture so transparency is maintained but not luck. I tried gif Adaptive transparency index or transparency alpha without good result.

  When I add to Dreamweaver CS3 (using the < Img > tag) my photo, it has instead a white finish (where transparency should by).

  I wonder that if someone can point me in the right direction - any idea is appreciated.

  Thank you

  Carly

  Hello

  PZ is correct, png is the best option, but you should be forwarned that a .png format maintains 'alpha/transparency' to a bit of a cost: it is usually a MUCH larger file in download size. You assign attributes in Fireworks, experiment a bit and set the 'slice' that you want and check the differences in the size of output file to compare the difference between .gif, .jpg, and .png. If it is a single image, and small enough, I would not be too concerned, but consider the time of collective download of ALL your images and data that you create your page - it is possible to integrate your background color of your image, it would likey be a better choice to choose .jpg or .gif format, if the time to download on your page is a concern. In addition, lowest for .png file size is reduced, but will usually create a white border around the silhouette - high will make a large transparent image (including the edges soft and melted), but will generate a file size that is much more important to choose wisely as you design your page...

  Hope that helps,

  Jesse

• Problem when adding 1 GB memory of my Satellite M60-103

  My satellite, running windows XP, became too slow; He had only 512 Meg of memory so a technician added 1 gb module, which gives a total 1.5 GB of memory.
  But since then I get from time to time problems with for example, touchpad and sometimes a blue screen with large print; in other words: the satellite is functional but is not stable.
  Is it because they put too much memory? say they have o replace the existing module and not add one more?
  Thks or your help.
  I'm not a technician, so please try to answer in simple English user

  It is certainly not too because your laptop model can manage with 2 GB of RAM.
  Can you tell us what module memory 1 GB is inside (specification and brand)?
  There may be a compatibility issue.

  Compatible with 1 GB of RAM for this model of laptop ha PA3411U-1M1G part number.

• problem when installing win7 lack of mass storage driver

  Dear Sir

  I have a problem during the installation of win 7 in HP PAVILION DV6700

  This laptop has been using vista so I want to change to win 7

  his wonder MASS STORAGE driver

  so I need this driver to install windows7

  Thank you

  If you need drivers, follow these steps:
  1. in the run box, type devmgmt.msc.
  2 unknown devices would be listed as such and plotted with a yellow question mark.
  3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
  4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
  5. an alphanumeric string like this PCI\VEN_1217 & DEV_7130 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
  6. Please provide this number so we can offer you the appropriate driver.

• HP Laser Jet 400 M401n: "incorrect email address" when adding 2nd ePrint printer account

  QUESTION:
  Get the error described trying to create a new email ePrint address after the attempt to add printer 2nd on our account.
  
  INFORMATION:
  + It shouldn't matter AT ALL because this is a process based on the web, but I'm on a Mac with OS 10.10.5 (Yosemite)
  + Printer already noted.

  * Sign on my HP, goto tab account and add a printer.
  * Enter the claim code on the printer I just got directly from my printer.

  * who did then appear next to enter an email address you want, such as: "[email protected]".
  HP site suggests actually creating your own custom address to make it easy to remember.
  
  * After this point, a small error in the instruction text appears, saying: "incorrect email address.

  * The only option available - persevering emails unnecessary, because NOTHING will not work, or... Press CANCEL

  * After the cancellation - my printer does NOT appear in my devices tab and to try once again, I must first of all remove the printer.
  * "delete printer" web services, back on my computer through services of printer via a web browser.

  ATTEMPT:

  * This has been a useless cycle and NEVER accomplished anything.  I tried to change the passwords of my SnapFish account AND my HP account online (which holds my ePrint account.

  * I tried the process on different browsers.  Does NOT work, or assistance.

  * And support HP online chat was totally USELESS with this question.  Either completely stupid points, or stupid questions that I had already answered or based on the information I had already tried.
  
  How can I get a second added printer if I can't spend not to add a second email ePrint?

  During the process, I could see that the printer has been added successfully.  I wouldn't be able to get to the next step (addition of e-mail) if it was not true.  However, I couldn't see the icon of the printer after they told me that my printer has been added.  Do not complete the E-mail process will make all the incomplete process.
  
  THE QUESTION AND ANSWER:
  The answer is the one who MUST be one of the first base of troubleshooting tips to do.  Check which browsers are used.  Most importantly make sure that Flash and/or Java is activated or as there are no extensions you might have that either inhibits these features somehow minor or major.  I had extensions that monitor those aspects that I have just went into Safari and temporarily disabled.  After completing the process - I turned on my rear power switch.
  
  NOTE TO ANY HP TECHNICAL SUPPORT *.
  The question is and has NEVER been on "BONES" - or more precisely, of Macintosh OS, which is superior in any case.  One based on web service or function such as this has NOTHING to do with the operating system.

• Problems when adding static routes to esxi 5.5 c

  Hello

  I read this KB on adding static routes:http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2001426

  But I'm unable to add static routes to my esxi 5.5. host. am I missing something here?

  ~ # esxcfg - road - l

  VMkernel itineraries:

  Interface of network gateway subnet mask

  10.238.187.0 255.255.255.0 subnet local vmk0

  10.238.188.0 255.255.255.0 subnet local vmk1

  by default 0.0.0.0 10.238.187.1 vmk0

  ~ # esxcli network ip route add - 10.238.188.1 - network 10.238.188.0/24 gateway ipv4

  In double track 10.238.188.0/24 found in the network.  Please remove first the old road.

  Kindly help.

  You cannot add a new gateway for a subnet exists in the vmkernel as you can't have two default gateway.

• Error when adding a host of SOAP...

  Hello

  I am trying to connect to a server by using WSDL SOAP plugin and whenever I'm trigering the workflow 'Add a host of SOAP', I get an exception as error:-

  Unable to load WSDL content and patterns! Reason: No type of coding: {http://schemas.xmlsoap.org/soap/encoding/} arrayType (name of the dynamic Script Module: addSOAPHost #8)

  Please help me solve this problem...

  Thank you.

  WSDL attachment

• SCSI address and null field problems when adding disks

  I had a spreasheet and requires up to 6 drives to be added to a list of virtual machines.

  vmname hdd1, hdd2, hdd3, hdd4, and hdd5, hdd6. I then want to run another command if hdd2 is lets say its to return "two disc exists."

  HDD1 must always be mapped to scsi 0:3.

  HDD2 must always be mapped to scsi 0:4 etc..

  but some time ago a hdd1 and a hdd3 and hdd6 but no hdd2 or hdd 4.

  I have two problems

  I don't know how to make sure the player is assigned to writing scsi address.

  I know how to do or not to do things if the fields are null or not.

  Help, please.

  You can specify a SCSI nummer if you add a drive hard using the vSphere API:

  $spec = New-Object VMware.Vim.VirtualMachineConfigSpec
  $spec.deviceChange = New-Object VMware.Vim.VirtualDeviceConfigSpec[] (1)
  $spec.deviceChange[0] = New-Object VMware.Vim.VirtualDeviceConfigSpec
  $spec.deviceChange[0].operation = "add"
  $spec.deviceChange[0].fileOperation = "create"
  $spec.deviceChange[0].device = New-Object VMware.Vim.VirtualDisk
  $spec.deviceChange[0].device.key = -100
  $spec.deviceChange[0].device.backing = New-Object VMware.Vim.VirtualDiskFlatVer2BackingInfo
  $spec.deviceChange[0].device.backing.fileName = ""
  $spec.deviceChange[0].device.backing.diskMode = "persistent"
  $spec.deviceChange[0].device.backing.split = $false
  $spec.deviceChange[0].device.backing.writeThrough = $false
  $spec.deviceChange[0].device.backing.thinProvisioned = $false
  $spec.deviceChange[0].device.backing.eagerlyScrub = $false
  $spec.deviceChange[0].device.connectable = New-Object VMware.Vim.VirtualDeviceConnectInfo
  $spec.deviceChange[0].device.connectable.startConnected = $true
  $spec.deviceChange[0].device.connectable.allowGuestControl = $false
  $spec.deviceChange[0].device.connectable.connected = $true
  $spec.deviceChange[0].device.controllerKey = 1000
  $spec.deviceChange[0].device.unitNumber = 5
  $spec.deviceChange[0].device.capacityInKB = 1048576
  
  $vm = Get-VM -Name MyVM
  $vm.ExtensionData.ReconfigVM_Task($spec)
  

  The above code adds a hard drive with number 5 on the SCSI to a virtual machine called MyVM. The line:

  $spec.deviceChange[0].device.unitNumber = 5
  

  sets the number of SCSI to 5. A value of 0 in the number 0 SCSI: 5 is defined by the SCSI controller. So if you have a SCSI controller then the first number will always be 0.

  I don't know what you mean with "I know not how to do or not to do things if the fields are null or not.".

• problem when adding a new row to the table.

  Hello
  
  I have a table in my ADF form. and when I click on CreateInsert adds a new to the table, but the premiere. I want that all the new lines to be added at the end of the table in a sequence. How can I do this?...
  
  
  Thank you and best regards,
  Helene

  Hello

  Try this:

  DCIteratorBinding dciter;
  BindingContainer links is BindingContext.getCurrent () .getCurrentBindingsEntry ();.
  dciter = bindings.get ("findAllTestAndryIter") (DCIteratorBinding);
  ViewObjectImpl vo = dciter.getViewObject ();
  If (vo! = null)
  {

  Line = vo.createRow ();
  int rangeSize = vo.getRangeSize ();
  int rowsInRange = vo.getAllRowsInRange () .length;
  int insertPos = rowsInRange< rangesize?="" rowsinrange:="" rangesize="" -="">
  vo.insertRowAtRangeIndex (insertPos, line);
  vo.setCurrentRow (row);
  }

• Problem when adding new column on table with report form

  Hello
  
  I have a form on table (either emp) with report(select_empno,ename,job_from_emp).i have insert, update, delete operations on the table.
  
  Now I added a new column DOB for alteration report emp.i sql query to show the new column altered report.i insert process (Block anonymous plsql) to insert this column too all by creating a new row.but the problem is with update.i am not able to find how to upgrade this new column while doing the update to line level.
  
  pls let me know if you can give some ideas on this.
  
  
  Kind regards
  CK

  Well, sorry for sounding terse.

  I have a few questions.

  Have you added the item to the form page and associated with the database column?
  You use your own PL/SQL page process to update or do you use the 'row emp process' process produced auto?
  If it's your own please send the code with the word {noformat}

  {noformat} (with the curly brackets and in lower case) above and below it. Your code should be formatted like this once you've hit post message:
  

  BEGIN

  NULL;

  END;

  Cheers
  
  Ben                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    
  

• Facing a problem when adding favicon.ico on demand at apex5

  Hello

  I mentioned this blog ORACLE BRAINS: ADDING a FAVICON to APEX to add favicon. But I'm not able to change the appropriate line in the header definition in the model (filtered per page), as it cannot be changed.

  It shows as 'this model is subscribed to the matching templates in the main theme. To change this model, change the main master page and then refresh the theme. You can also create a local copy cancelled this model. Unsubscribed models can be modified and will not be overwritten by an update of the theme." " So, how can I find the main theme and change?

  Please help me on this.

  Hi ThiliBu,

  ThiliBu wrote:

  I mentioned this blog ORACLE BRAINS: ADDING a FAVICON to APEX to add favicon. But I'm not able to change the appropriate line in the header definition in the model (filtered per page), as it cannot be changed.

  It shows that "this model is subscribed to the matching templates in the main theme. To change this model, change the main master page and then refresh the theme. You can also create a local copy cancelled this model. Unsubscribed models can be modified and will not be overwritten by an update of the theme. "So, how can I find the main theme and change?

  Please help me on this.

  Using universal theme with Oracle APEX 5? If so, the blog you mentioned is suitable for older versions of Oracle APEX, with 5 APEX, you must follow the following blog to add favicon to your application.

  Reference:- APEX 5.0: Favicon customized for Applications using the universal theme | Inside Oracle APEX by Patrick Wolf

  Kind regards

  Kiran

• Problem when adding a folder of additional plugins via the preferences

  When I add an additional plugin using the plugins preferences in CS6 plugin appears in cs6 but my active tools will vibrate or vibrate around when I try to use them. If I uncheck preferences-plugins-additoonal plugins and restart the pulsation of the tools constantly.

  Anyone else run into this. No way to stop the exciting tools?

  You point the preference of plugins for plugins CS6 or a previous version of Photoshop plugins folder?

  If so, turn off this preference - you are doing more harm than good.

  If you are just pointing to a folder with third-party plugins, then most likely these plugins have some bugs that are originally "pulsed" tools.

• Problem when adding header/footer

  Hi all!

  We are chemical product design software company. Our products have the export to PDF (procedure established internally according to the specification of the public pdf format).

  One of our clients has Acrobat Pro installed and wants to add the header/footer for the pdf files generated by our software. And here the problem arises: If a particular page in this pdf file contains text data - the header is not displayed. If a page contains only graphics - everything is OK.

  I downloaded an example at http://www.multiupload.com/GE0EQ0LR5J . You can see the original file Test-head - Footer.pdf and after editing in Acrobat 8 Pro: the header appears on page 2, but not on page 1.

  Interesting fact: Acrobat Pro 6 inserts header to all pages, but 8.9 and X only on page 2.

  I broke my head trying to find why this is happening, but could not.

  Ideas, people?

  There is something very strange with the object of text on page 0 - if you run a low-level syntax of the file using tool control upstream Acrobat Pro, it will report a number of failures. You will also find that this is not a text object as an object page should (i.e. you cannot change it).

  I have not tracked down why this should cause the header/footer missed their calls to paint, but he does. I'll have a poke on but can't promise anything.