Trying to empty the queue through dbms_aqadm resulting in error

Similar Questions

• I suddenly can't all sites that I use every day on Firefox to load. I tried to empty the cache. No difference. How can I fix it?

  I use Firefox every day to access many sites. Yesterday, it worked perfectly. Today, that it won't work at all. I just get "Unable to connect" message when I try to load websites - and sites work on other programs (even if I need to use firefox to do certain things on some of them...) so it is not a problem of internet access. I read the help articles and they help at all. I tried to empty the cache. It makes no difference. I tried to check that no proxy is highlighted under the advanced access settings. It is, and see which makes no difference. I tried looking to see if Firefox is permitted to access the web through my windows computer - but I can't say what program he would need to connect. And I have not changed my settings since yesterday - when it worked perfectly (or seems to). That shouldn't be the problem.
  Ive wasted most of the fights with this morning. What the hell is going on here and how can I solve this problem?

  Hello, normally these problems are caused by a security/firewall software which does not recognize and therefore blocks the new versions of firefox - firefox 23 was released yesterday: solve connection problems to websites after Firefox update

• Why I get this trying to empty the Trash: the operation cannot be completed because the item "IMG_0645.jpg" is in use

  After selecting and dragging some photos of Photo on the desk I have their attached to an e-mail and sent them to the coast. Then I selected the 5 photos on the desktop and put them in the trash. When I tried to empty the trash later I received the following message: the operation cannot be completed because the item "IMG_0645.jpg" is in use.

  Aren't these photos on the desktop 'copies' of the originals in the Photo?

  All wise users out there with an answer?

  stop, disconnect all external devices

  Restart your computer in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  empty the trash after checking the files in there are of no use to you

  arrested again

  Reconnect the external devices

  reset.

• Trying to empty the trash.  After clicking on empty the trash.  An error comes up saying that this cannot be done due to the error 50.  Tried to check and repair disk permissions.  This finished.  Then tried to empty the trash again and got the same error

  I tried to empty the trash. After clicking on empty the trash. An error comes up saying that this cannot be done due to the error 50.

  Tried to check and repair disk permissions. This finished.

  Then tried to empty the trash again and got the same error 50 yet.

  I rebooted my macbook. When it restarted it flashed the apple logo, progress bar began to charge up to 15%, then the black and white code popped up for a few seconds, then a box pops up saying "your computer has restarted because of an error, press any key to restart." It is now is an endless restart loop.

  I can't go in safe mode or in disk utility.

  Any suggestions on what to try?

  Thank you

  What happens when you try to restart without danger as indicated to OS X Yosemite: start in safe mode

• The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Hel

  The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP

  Hello

  Control Panel - SOUNDS - Audio peripheral devices configuration-manager

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
  the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
  Just make sure that the version you have installed appears in the tab of the driver.

  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
  and show disabled devices - check your micro - highlight them, then lower right properties. Do
  of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
  and APPLY / OK changes.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• When you try to download sp3 for office 2007 I get 22% done then it freezes and comes up with the error 8007ee2. I tried all of the fixes recommended without result, ideas?

  When you try to download sp3 for office 2007 I get 22% done then it freezes and comes up with the error 8007ee2. I tried all of the fixes recommended without result, ideas? I am running Vista and office 2007. I tried all the Windows solutions but nothing works

  Hello Stephen,

  You happen to have another system that you can try to download the fixit on and then moving on a USB? You can also try this fixit as well: http://support.microsoft.com/kb/971058

• I'm trying to download the trial CC, but I get error 205 cod. How can I solve this problem? A few months ago, I used the trial CC and removed.

  I'm trying to download the trial CC, but I get error 205 cod. How can I solve this problem? A few months ago, I used the trial CC and removed.

  Help creating cloud / cloud creative applications download error

  http://helpx.Adobe.com/creative-cloud/KB/error-downloading-CC-apps.html

• Get Queue Status output / empty the queue

  Hey everybody,

  I am trying to create the program that will record all the data in a queue after a number / deadline is met.

  However, when you try to save the output of the Flush queue / status of the queue, I'm not sure how to proceed. My original entry is a group of 4 elements.

  The output shows that it is "an array of clusters of 4 elements..."

  My initial approach was to: change of the table to a group (of 8 items)-> separate each element in another group 4 elements-> merge each specific item to get a unique flow of each of the 4 original elements.

  Result: 1 table-> 1 cluster-> 8 clusters-> 4 data streams, each stream of data representing one of my pieces of original entry (my goal).

  However, this seems to be a long process and I can't help but feel that I'm on in a much simpler way to do.

  I would now like to know if it's the only way I can save each of the indivudual 4 elements in the original 'picture of clusters of 4 elements' produced from the Flush queue / status of the queue?

  Also, is there a way to save/log ALL the data directly from the Flush queue / get an output of status of the queue (jump cutting/splitting of process data)?

  Thank you!

  What you really want to do, is use Dequeue item inside a FOR loop.  Inside the loop, ungroup you your cluster and the output values of the wire.  Let the loop FOR the autoindexing and you will have a different picture for each item in your cluster.

  See the example I did here: http://forums.ni.com/t5/LabVIEW/TDMS-File-starts-recording-data-at-20Hz-but-after-a-short-time/m-p/3...

• I tried to empty the trash, secure, but there are 5 items in. Can you help me?

  I tried to clear all items in the trash, but as I clicked on Secure Empty Trash he began to delete and then stopped with 5 elements still in there. Can you help me? James

  Please read article by solving the problems of Trash from the X Lab for some troubleshooting steps. You can find the article on:

  http://www.thexlab.com/FAQs/trash.html

  Another good article is directly from Apple, this article is you may not empty the trash or move a file to the Trash - Apple Support

• How to empty the queue in 9.2?

  Hello
  In oracle 10 dbms_aqadm package serve there procedure to clean up the queue table. How serve the table queue in oracle 9.2?
  Concerning
  MKr

  BEGIN
  DBMS_AQADM. () ALTER_QUEUE
  queue_name-online "np_out_online."
  duree_retention-online 24 * 60 * 60 * 21); -21 days waiting in line after waiting
  END;

  When a message is removed from the queue, it is suppressed by the background process when the time in the field of the TIME_MANAGER_INFO of the queue_table is due.
  If the messages are NOT beeing deleted then your background queue monitor process does not run (IE if you specifically set the AQ_TM_PROCESSES = 0). On a 10g it is supposed to be disconnected. I'm not on 9i - but a good guess is maybe to put it at 1? Or try for a good answer on 9i metalink.

  To my knowledge retentionn 0 is the default value - so check the TIME_MANAGER_INFO and the AQ_TM_PROCESSES column.

  concerning
  Mette

  Published by: mettemusens on 2009-08-10 14:22

• Reliable messaging, attempts of the queue and management of AIA errors

  Hello
  I would like some advice on how to best use AIA errors management process in a process that uses the queues.
  We have a composite that picks up messages from a queue and executes a particular process on each message. If the errors of process, it preforms a rollback put the message on the queue. It retries then 3 times, possibly succeed in another attempt.
  My question is how this process should use error handling infrastructure. We want to see a single error Notification only in the final of new attempt fails. We do not want to be informed for each failure, that we will end up with a lot of unnecessary notifications.
  How it should be managed in AIA? Is there a flag located in the message when it's final attempt that the composite can check before sending the notification of the error? Or is used another method?
  Robert

  While I can't help you make these decisions, I want to make a final comment on this: it must also ensure not too much engineering workflows. What you describe with the queues, before and after the EBS would be wise in some complex scenarios (and that's why you'll find that the developer of the AIA Guide), but I doubt it's the right plan in each case of use asynchronous integration. This design has apparently more options, but also more code, several components middleware such as queues, so significantly more complexity leading to harder overall maintenance.

  The seeds of AIA use these interim queues as well - but only where the use case really required, for example where the orchestration of an order goes through the various stages of treatment. In this scenario, you do not want to be able to resubmit a message that failed each of these persistence points while guaranteeing delivery. For a one-way flow of integration that basically displays a message to application application B wouldn't us usually do.

  Gerhard

• I'm trying to get the update, but I keep seeing error 46?

  I'm trying to get the update to CC but keep see error 46?

  Hello

  Please see

  Cannot install Creative cloud installation - error code 46

  Hope this helps!

• I tried to install the updates through microsoft updates and when I tried it said that I had to update the software update was growing up and when I rebooted, it said missing operating

  I had run recovery on the PC and went to updates of Microsoft for the update and when I did he told me that I needed to update the software to update so I did and when I rebooted after successful update it gotten past screen of the bios and everything said missing operating system so I restarted and tried to recover again but still says Missing operating system, I went into the bios and it HDD to see fixed so I have no idea what to do ideas?

  am on win xp home eddition
  HP pavilion a810n

  any help would be much appreciated thx in advance
  Chirs

  Hello

  You can check this link:
  "Operating system not found" or the "Missing operating system" error message when you start your Windows XP-based computer
  http://support.Microsoft.com/kb/321626
  

• Until recently, I was able to get the Windows updates. I tried to get the updates today and I get error 0 x 80070008.

  Running XP Pro SP3, 8 IE as default browser, allows for the Windows updates until recently.  Haven of peace has been updated in over a month.
  Use IE to select Windows Update. Get error 0 x 80070008.   Tried the MS Fixit tool and which failed with a message that it has encountered a problem.
  Anything specific to help me be able to understand what is happening.

  Hello

  I suggest you try the steps from the link below and check if it helps.

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update: http://support.microsoft.com/kb/836941

  Hope this information is useful.

• Trying to expand the space system restore automatic gives error 0x8007007B

  I just had a problem with a driver and wanted to use system restore.  To my great regret, my computer did not a single restore point.  When I went to do it manually, I found that its maximum use was 0% for the restoration of the system in the C drive.  I tried to increase it, but every time I press on apply or ok (an increase of any amount) the following message appears:

  "Could not apply the settings for the following reason: the file name, directory name or volume label syntax is incorrect." (0x8007007B).
  When I press ok, he said: "there was an unexpected error in the property page: (same message as above).»  Please close the property page and try again. »
  I've done the obvious reboot and so on, and it allows me to create a manual restore point, but won't automatically set restore points or be it me to increase the disk quotas.
  Any help would be greatly appreciated.
  (I use a clean install of Windows 7 Professional 32 bit, on a 3 GHz Pentum D, 1 500 gb SATA I partitioned the drive, 4 GB DDR2 and standard components, no software or special equipment).

  Hi sss68,

  Welcome to Microsoft Windows 7 answers Forum!

  The error 0x8007007B occurs when the system is configured to store restore points to a location or a bad way.
  Set the path to the appropriate Windows 7 restore point.
   
  To remove this error , perform the following solution:
  To set the path of the appropriate Windows 7, restore point as follows:
  1. click on start.
  The Start Menu appears.
  2. type sysdm.cpl in the start search box and press .
  The user account control window will prompt you for permission to run the program.
  3. click on continue.
  The System Properties window appears.
  4. click on the System Protection tab.
  5 under automatic restore points, clear all invalid location or duplicate
  6. click on verify drive C: with the Windows Logo
  7. click on apply, and then click Ok
   
  Create a system manually restore point:
  1 open the system by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click System.
  2. in the left pane, click System Protection if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on the tab System Protection and then click on create.
  4. in the System Protection dialog box, type a description, and then click on create.
   
  Follow the document below for additional guidance on the creation of System Restore Point:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-point

  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum.