trying to install my printer
I was wondering if windows xp is supported to manage the installations of my lexmark 1200 series printer scanner and copier. Could be he you pls let me know how to get all of this with a cd of instalation please
Support of Lexmark site has 32-bit of Windows XP drivers, software and utilities for the Optra Color 1200 printer available. Click here to go to the site.
Tags: Windows
Similar Questions
-
I had a Trojan horse and had to do a reinstall of windows XP Pro is now trying to install my printer but I get the error message saying "entry point procedure GetMessage DLL is not found in the cscom dynamiclink library dll. Help, please!
Hello
I suggest you to refer to this link and check if it helps:
http://support.Microsoft.com/kb/308028
It will be useful.
-
Original title: print spooler could not be started
Trying to install a printer. Get "error 1920 Service print spooler (spooler) could start. Can you please help?
Hi phil195golf,
1. What is the brand and model of printer?
Try these steps and check if the problem persists.
Step 1: Run Microsoft Fix to diagnose the problem
a. see you can not add a printer and you receive spooler printer in Windows XP error messages
b. click Microsoft hotfix and run the tool successfully.
c. restart the computer.
d. install the printer and check if the problem persists.Step 2: If the problem persists, install the printer by turning off all non-Microsoft programs
see How to configure Windows XP to start in a "clean boot" State .
b. follow steps 1 and 2.
c. installing the printer and check the result.Note: Article, remember to follow 'steps to configure Windows to use a Normal startup state. "
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I am trying to install a printer wifi (Kodak ESP 7250) and they are both connected to the same wifi but when I try to add the printer, my PC can't find it. I made sure they are both connected to my home network and when I go to control panel / printer and try to add a network printer / wireless. He won't find it. Any ideas?
Hello
I suggest you to visit these links and check if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
It will be useful.
-
After trying to install a printer, Epsom SX130, on Windows 7, WORD has stopped working - have tried uninstall & restore but still cannot use WORD. After paying only £ 65.00 to restore the office, I'm very unhappy. It is the only document that we need to print, others may be sent by e-mail, but now I can't even open Word documents to use as attachments to an email. I'm totally desperate, do we buy a 'small' I wonder. More than 60 years, when I started it, maybe I was just too old or it's Windows 7 just make my / our life uncomfortable for us to update: Please keep in mind, I'm very, very, ridiculous with computers. We have done with a drive by the way if that makes a difference & downloaded an update. If the answer is "not compatible" that's fine, I can make documents on the old computer, BUT need words for emails: i.e. repeat orders etc. which are vital to our system of new physicians.
Am totally fed up now...
Hello
1. what version of Microsoft Office are you using?
2. you receive an error message when you start Microsoft Office Word?
You can perform the system restore the computer to the date when the changes were made not (before the date where Microsoft Office was working fine).
System restore
http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
NOTE: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.
For further assistance on the question, you can post your query in Microsoft Office community:
Microsoft Office community
http://answers.Microsoft.com/en-us/Office/Forum/Office_2007
It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.
-
Runtime error trying to install the printer on laptop software
I have a laptop HP with Windows 7 Home Premium SP1, my printer is a HP photosmart c5580 AIO. It prints well but without software of the printer on the laptop I can not scan to the computer and use all the features of the printer.
That being said, I am now trying to install the printing software Online and cd and I get Microsoft C++ runtime error and it will not install software.
Ive tired all convenience stores of HP, etc, etc...
Help, please
Sunny
Hi sunny1881,
Welcome to the HP forums!
I see you have a Photosmart C5580 which becomes a Microsoft C++ runtime error when you try to install the software. I'm sorry to hear that, but I will certainly do my best to help you!
I would recommend that you follow through this Re: Error message Microsoft visual c ++ runtime library through my colleague @SuperMario1 as these steps should be able to help solve your problem. This is a long thread, but the steps should help, so take your time and work through it.
I would like to know how it goes for you
-
The problem occurred when trying to install a network printer on my laptop that is running Windows 7. Now, when I select the printer in the menu "add a printer" and press "Next", I get 'Unable to connect to the printer' & 'the operation failed with error 0x00000002 ".
The printer is a network printer, connected to my desktop running Vista. In addition, it is a Brother MFC-8300.
I can install the printer when it is connected directly to my laptop, but when I try to add it as a network printer, I have the problem that I have just described. I should mention that I had to install a special version of the driver ("Brother MFC-8300 v.2") on my desk to solve another problem, I had with another computer on the network, which was running Vista-64 (see http://www.vistax64.com/vista-print-fax-scan/77226-brother-mfc-8300-printing-blank-pages.html).
So basically this is what happens:
(1) I click on 'add printer '.
(2) I click on 'Add a network, wireless or Bluetooth printer.'
(3) I select ' Brother MFC-8300 v.2 on VISTAMACHINE ' and click 'next '.
(4) a "Windows printer Installation" window appears and says "connection to Brother MFC-8300 v.2 on."
VISTAMACHINE"and underneath"seeks pilot."
(5) a "Add a printer" window appears with an "X" inside a red circle next to the mention 'to connect to the printer.
"Windows cannot connect to the printer", and "Operation failed with error 0x00000002".
Does anyone know what I need to do?Create two printers on the computer, the device sharing. Make a word share name, do not use the name of the driver for sharing. Spaces in the name to make it even more difficult when you set a SMB (local port) connection to the printer. Set the Port for two printers shared the same (I assume that the device is connected to a USB Port).
Use the driver Vista Inbox for the part for 32-bit machines. Use the driver provided Brother (Brother MFC-8300 v.2) share for 64-bit machines.
Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1
-
Error 1053 while trying to install a printer.
* - Original title - error 1053
Tried to install the new printer on Windows 7 OEM OS. Put it on CD, you click on run and immediately got error stating: (abbr.). Print spooler Windows was arrested. Start the print spooler service. I click Start stressed after the highlight of print spooler in Services. Immediately receive error 1053: could not start the print spooler. Service has not responded to the request in a timely. Attempted to fix by downloading the Microsoft .NET Framework 1.1 Service Pack 1 hotfix. Tried 4 different patches that were made to work for Windows 7. Everyone says this system not covered with this patch. Without other options, any solution?
Hi man 3D.
I understand that you can not install a printer. I'll help you with this problem.
1. What is the brand and model of the computer?
2. What is the brand and model of the printer?
3. have you made changes on the computer recently?
4. what security software is installed on the computer?
Method 1.
Open the printer Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Printer-troubleshooter
Method 2.
Install a printer: http://windows.microsoft.com/en-US/windows7/Install-a-printer
Method 3.
Solve printer problems: http://windows.microsoft.com/en-US/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
Method 4.
You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.
Method 5.
I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833
Try these steps and let us know the status so that we can help you.
Thank you.
-
I just bought a printer for my computer, tried to install it but it keeps saying: he can't find a driver for it. It's a HP Deskjet 3052 a
The following Support for the printer HP Deskjet 3052 a gives little help for installation problems: http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=61341&tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=5061073
The 'how' section of the same site can also have something that will help: http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_task=useCategory&cc=us&dlc=en&lang=en&lc=en&product=5061073
-
Try to install e-printer on a netbook... don't get a message on the spooler service. What is the spooler service?
Hi Pat,
Spooler service manages print jobs by saving in a queue and submit them to the printer in order specified instead of sending them directly (which can cause the printer back up if too is sent at a time depending on how printing is setup and the printer works).
Try the simple fix to see if it works. Go to start / Control Panel / Administrative Tools / Services and place you on print spooler and double-click it. Click the Dependencies tab, go to all the services listed there and confirm that they are automatic and started. If this is not the case, change it to automatic, and then restart them. Once finished, return to the print spooler and set it to automatic and start it. Click OK and close out Services and control panel and restart. When you come back, come back to Services and check that the print spooler again told automatic and started. If this isn't the case, after back and let's check other things. If so, proceed to the installation of the printer, and this particular problem should no longer be a problem.
I hope this helps.
Good luck!
-
HP has me turn off the firewall, hide windows programs, uninstall HP System. I also cleaned the registry, disk and defrag, I also downloaded the hotfix from Microsoft and it is impossible to identify the problem or difficulty there. At one point I could get to download the software before I would get error messages or #33472310 and 25672887.ZIP. Now I can't get that far, I get to the point where he say he prepares the system for installation when it stops with the message "the system cannot ind specified path. I'm not now about to install I was Sunday when I started. Can anyone help?
Hi Julien,
Please provide the complete error message you receive when installing the printer software.
I suggest you try the following steps:
Step 1: use the Windows Installer Cleanup utility for delete all entries that are associated with the product that you have trouble to install (printing software):
Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:
http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe
Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start, point to all programsand then click Windows Installer Cleanup.
In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all, and then click Remove. When you have deleted all entries, click exit, and then start the installation of the product
Description of the Windows Installer Cleanup utility
http://support.Microsoft.com/default.aspx/kb/290301
Step 2: Put the computer to boot and then try to install the program
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.
Important: n ' forget not the computer to start normal follow step 7 in the link.
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
The cd I have for printer gives me error message 'Pilot' not compatible with the current system and I can't install the printer driver. Is there a cd that I can buy or download free I can get?
Yes - go to http://support.lexmark.com/index?page=content&productCode=LEXMARK_X1270&actp=PRODUCT&id=DR15494&segment=DOWNLOAD&userlocale=EN_US&locale=en and download the latest software.
Note: the link above is for the 32-bit software, so if you need the 64-bit version, it can be downloaded at http://support.lexmark.com/index?page=content&productCode=LEXMARK_X1270&actp=RECOMMEND&id=DR11218&segment=DOWNLOAD&userlocale=EN_US&oslocale=en_US&locale=en
-
I was wondering if I should get a new printer or can I still use my old F4240 on my new computer laptop that has Windows 7 Professional? When installing DVD, he tells me that it is not supported.
Appreciate any help you can give me.
The Deskjet F4240 is supported in WIndows 7. It is possible that the DVD you have was released before Windows 7. You can download the complete driver recommended from HP here.
The wizzard running install driver to http://www.hp.com/go/tools would also be an option.
-
Im trying to install a printer and I get this error message
"the WIN16SUBSYSTEM has BEEN UNABLE to ENTER PROTECTED MODE, DOSX MUST BE in YOUR AUTOEXEC. NT AND PRESENT IN YOUR PATH, then it wont let me load software with what happens when I run the cd printer and suddenly the installation button to install the software
I wonder if this CD is for Windows XP. Try to connect to
http://support.Lexmark.com
Then, locate your printer and download the driver that it is displayed. It should come with instructions for installation.HTH,
JW -
trying to install a printer with no disc set lexmark
Cannot install my lexmark printer have no disk adjustment upward
Cannot install my lexmark printer have no disk adjustment upward
Hey factoryworker
Go to the lexmark website and download the drivers and software for your printer modelWalter, the time zone traveller
Maybe you are looking for
-
How long will it take to fix my iPhone screen 6? The screen is broken. The phone still works fine and I can always drag. I made an appointment at the Genius Bar. What I need to leave the phone or they will fix it immediately?
-
I have a MacBook and I want to use it without entering a password each time I open it. It is, how?
-
It is even possible to securely download Skype for Linux?
Download page redirects to HTTPS, http, there is no signatures or hashes that I can find, and of course Linux does not have Authenticode. Did I miss a secure way to download Skype for Linux, or there is no such thing?
-
Hi, I use Skype to chat internally. But one day, Skype is now always in offline. Evethough it is connected to the internet, I'm still offline. any thoughts?
-
Hi all! We have a customer who wants to print RDP remote at a local levelAIO printer is connected. the printer is unable to print on the TS00xport - driver problem. now, we found, is it possible to print directly on the unc path of theprinter when it