Trying to install wireless HP 7510. Running wireless Cisco, WIN XP and WIN 7 OS (and iPhone).
Just bought the 7510 - tried the automatic installation and he got a 169 IP address (my ISP gives us the addresses in the range 24). I can ping the printer, but not print. I tried the manual installation of the TCP Port, but after you enter the IP address, I get an error saying that it cannot detect the device. Ideas?
Back to basics. I turned off the printer, AP and cable modem and count to ten. Connected to the cable modem, let it sync. Branche plugged in AP, let it sync (confirmed by the work of PC), connected to the printer - he caught a 24 IP via DHCP. The only new thing here has been disconnected the cable modem. Not sure why the printer would not forget the 169 address and not know not why the modem cable would not provide an IP address, but it works now.
Tags: HP Printers
Similar Questions
-
I downloaded Photoshop CS2 and tried to install it on Mac. I have a license and heard its possible still install Photoshop CS2 for Mac. I'm on Mac 10.9.4. On the installation of scripts, I received an error - helps a lot?
heard it can still install Photoshop CS2 for Mac.
Only on Mac under 10.6 or earlier.
CS2 will not install on modern Macs like yours with 10.9.4 running Intel processors.
CS2 is a PowerPC software designed to run on PowerPC processors. It is not compatible with the Intel processors (without the Rosetta translator).
The latest version of Mac OS X can run CS2 (with Rosetta) was OS X 10.6.
-
I am trying to install an update to iCloud on my Win 7 PC and I get an error message that there is a problem with my windows install. How can I solve this problem?
Hello grandpa_bill,
Thank you for your participation in the communities of Support from Apple.
If you get an error when you install an update to iCloud for Windows, try to download the latest version of download iCloud for Windows.
For more information, see get help using iCloud for Windows.
All the best.
-
IAM trying to install updates on windows 7, but he keeps looking and never find updates?
I am trying to install updates on windows 7 but it keeps looking and never find an update tried everything still continues looking for updates, no results
Thank you
It is at the top left of the window update page
Then on the drop-down list where this image shows the check for updates but let me choose whether to download and install them.
Never check the updates appear in the list
Be sure to uncheck give me also recommended updates like... well ;)
-
I tried to install Illustrator several times. He finished the installation, and then when I click on it to open it it says error: 16
Error 16 http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
-including DW039, https://forums.adobe.com/thread/1500609
-
Use windows 10 and trying to install Creative Suite Production Premium (disk version) 5.5 and the disc will be 1-3 do not read / auto start? Any help will do!
You can try to download the installation files instead of using the drive.
CS5.5 - http://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS5.5: http://prodesigntools.com/adobe-cs5-5-direct-download-links.html
-
I opted for Windows 10. Try to install Photoshop elements 13 out of the Adobe site. He told me that the product I'm trying to install is n ot a real software from Adobe and seems to be counterfeit.
Hello
Please see warning: 'Adobe Genuine Software Validation failure... '. » | Windows
Hope that helps!
Kind regards
Sheena
-
I got Pro 8.0 on an old computer. tried to install pto 8.1 using only series. as old and it did not work. where can I find pro 8.0 or where can I find the correct SN?
If you do not need acrobat 8 pro or something another link below, you will need to explain.
Available downloadable Setup files:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC | XI, X | 9,8 | 9 standard
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7
- Photoshop Elements: 10, 11, 12, 13. 9,8,7
- Lightroom: 6| 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)
- Captivate: 8 | 7 | 6 | 5
- Contribute: CS5 | CS4, CS3
Download and installation help links Adobe
Download and installation to Prodesigntools help links are located on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions". window using the Lightroom 3 link to see these "important Instructions".
-
I am trying to install Adobe Photoshop elements Adobe Premiere elements 13 13 and can't find the serial number. Where is the serial number? It is a dvd.
-
Im trying to install drivers for a Nvidia Geforce GTX 260 on my windows vista 64 bit computer. Every time I have try and start the download, it is said that my driver is not a 64-bit driver, which is false, and that my system is 64 bit, which is true. SO... after I click 'OK', it begins to download only to have another pop-up saying "Setup has detected that the system in use is not windows vista 64 bit" which it is. Basically its contradiction with himself. im confused.
Im running windows vista 64-bit.
I just upgraded to a Nvidia 9800GT, to a Nvidia GTX 260.
In frustration, I deleted all the old drivers, but the new will not download.
The first error says that the drivers are not 64-bit.
The second error indicates the operating system is not 64-bit.
Let the site nVidia Driver detect your video card. If it still does not work, contact nVidia for a solution... Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/
-
I purchased mac snow leopard and tried to install it on my mac-pound aluminum end 2008, it could not install, I clicked on try again, then it restart it. It came with the screen of the language and I thought it was the clean install the way to do it, but I don't want TO REMOVE MY DRIVE because the memories of family, so I have snow leopard of ejection and tried to boot the system back to 10.5.8 but that did not work, it just turned off, so my question is is it possible to install mac snow leopard without deleting all my files, if not any other way to get all the files safe again. Please and thank you. I didn't backup:
Oh yes and I checked the disk on boot disk utility and nothing on my drive has been deleted and yet if...
-
RPDF files missing.never post private information such as numbers of mail or telephone!
Ideas: pdf files are missing and error 646
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
during the installation of updates and some extensions files cannot be opened. Also when you do e-mail or any continuous strike moving cursor then have to keep changing the typing. Error 646 present during updates.
Hey Jaynie Tatt
Read and follow the information in the microsoft link below to fix your error code 646 using their fix - it or using the registry edit
http://support.Microsoft.com/kb/2258121
Walter, the time zone traveller
-
DMA2100 is frozen after trying to install wireless
I tried to connect a new DMA2100 to my VMC and now it is completely frozen, locked, hanging, etc. The initial screen will appear and you can window around during about 5 to 10 seconds, but then the device is completely insensitive. I was wondering if it was a bad camera, I brought another House and it's the same thing.
Here's the background, I tried to run the installation program to use wireless initially but the DMA2100 would simply wants it "search". I was never able to screen so I just unplugged the device, which would lead to a repetition of the same loop. I found a thread that said having the same questions that has been set using cable and update the firmware. I've updated to 1.1.6 and then was able to complete the configuration and use the functions of the Extender. As a result, I restore to its factory default condition, disconnected from the power, and disconnected the cable ethernet with intentions to go wireless.
(Remember, it's about two units) When I turned on the unit (s) back, I noticed as the default splash screen does not pop up but rather the main screen which has 'Settings' or 'SFBC '. Nevertheless, I followed through "settings" to run the installer again and choose Wireless this time. Once more, it froze just. I even waited all night on a single unit. This time, when I recycled power to the capacity of the facility, they arrived in the State where I can only window autour for literally 5-10 seconds until I can do it without more (I waited all night for that to change too). I tried the 'soft' reset (5 seconds the reset button) and the hardware reset (holding company of discount for 10 seconds power, break of 10 seconds and 10 seconds on). None of this changes anything. Within 5-10 seconds, I can window autour enough in 'settings' to see that it is a "wireless" network management mode But I did not have enough time before it crashes to change anything. My finger on the distance from the lock time was fun the first 10 times I tried. even when I thought that I managed to change something, it froze again.
I can't believe there is no real way to reset this (USB port?). Literally, these units cannot do anything now. I'm still waiting to hear from Linksys, but I thought that I would like to probe for any input... I am actually very happy with all of my other Linksys products, but the quality of these units is really shocking; I guess that's why there is a fire sale on these nowadays.
Workaround is to disconnect the antennas while the implementation. Also, be aware, that the wireless MAC address is different from the MAC address on the serial number sticker. If you use filtering of MAC address of your wireless router.
-
Trying to install wireless router WRT160N
Here's my network setup: cable modem adapter VOIP phone to a wired router to 2 desktops
I plugged the ethernet cable from the modem cable in blue port 1 of the wireless router, plugged the blue cable on port internet and then connected to the WAN port on the VOIP adapter. Also tried the reverse (ethernet cable to the Internet port, blue cable in port 1 and then to the WAN adapter VOIP port). Or work of configuration and installation is not complete.
The configuration above puts the router in front of the VOIP wireless and wired routers. Should I put the router wirelessly between the VOIP adapter and wired router or maybe AFTER the wired router at the end of the network?
I thought about it - the VOIP adapter must be first online... so now, my configuration is modem cable---> VOIP adapter--->--->---> computers wired router wireless router
Thanks for trying to help anyway!
-
None
Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
App Store apps in the right folder installation
Hi all It seems that my external hard drive is completely confused the App Store. I have a backup on this external hard drive, which also contains a folder "Applications". I disassembled the drive, but it does not help: whenever I have install some a
-
Support Firefox 8.0 login automatic password Norton
Older versions of Firefox did not support the functionality of automatic Norton password login
-
A former Officejet 6100 e prtinter is expandable to AirPrint?
We bought an Officejet 6100 printer in April 2013. I noticed that now the new printers Officejet 6100 have AirPrint compatibility. Can I put on my current 6100 to add this function firmware or software? {Information}
-
His problems with Satellite A100 (PSAA8)
I constantly sound with the laptop problems. While I hear the windows startup noise and beeps, I cannot hear any sound of things like CDs, iTunes, Media Player – in fact an error message will still appear. In Media Player, the error message "Windows
-
just bought a 6 d. shooting multiple exposures, and then disabled it push normal, but the functionality was not disabled. He is still shooting Multipe exhibitions. feel trapped. Help. How to get out or is it a defect of the camera? Thanks for any hel