DMA2100 is frozen after trying to install wireless

I tried to connect a new DMA2100 to my VMC and now it is completely frozen, locked, hanging, etc.  The initial screen will appear and you can window around during about 5 to 10 seconds, but then the device is completely insensitive.  I was wondering if it was a bad camera, I brought another House and it's the same thing.

Here's the background, I tried to run the installation program to use wireless initially but the DMA2100 would simply wants it "search".  I was never able to screen so I just unplugged the device, which would lead to a repetition of the same loop.  I found a thread that said having the same questions that has been set using cable and update the firmware.  I've updated to 1.1.6 and then was able to complete the configuration and use the functions of the Extender.  As a result, I restore to its factory default condition, disconnected from the power, and disconnected the cable ethernet with intentions to go wireless.

(Remember, it's about two units) When I turned on the unit (s) back, I noticed as the default splash screen does not pop up but rather the main screen which has 'Settings' or 'SFBC '.  Nevertheless, I followed through "settings" to run the installer again and choose Wireless this time.  Once more, it froze just.  I even waited all night on a single unit.  This time, when I recycled power to the capacity of the facility, they arrived in the State where I can only window autour for literally 5-10 seconds until I can do it without more (I waited all night for that to change too).  I tried the 'soft' reset (5 seconds the reset button) and the hardware reset (holding company of discount for 10 seconds power, break of 10 seconds and 10 seconds on).  None of this changes anything.  Within 5-10 seconds, I can window autour enough in 'settings' to see that it is a "wireless" network management mode  But I did not have enough time before it crashes to change anything.  My finger on the distance from the lock time was fun the first 10 times I tried.  even when I thought that I managed to change something, it froze again.

I can't believe there is no real way to reset this (USB port?).  Literally, these units cannot do anything now.  I'm still waiting to hear from Linksys, but I thought that I would like to probe for any input...  I am actually very happy with all of my other Linksys products, but the quality of these units is really shocking;  I guess that's why there is a fire sale on these nowadays.

Workaround is to disconnect the antennas while the implementation. Also, be aware, that the wireless MAC address is different from the MAC address on the serial number sticker. If you use filtering of MAC address of your wireless router.

Tags: Linksys Adapters

Similar Questions

  • my calendar has frozen after trying to move a clip in e-mail by using the calendar; still frozen after that force them to leave

    my calendar has frozen after trying to drag and drop a piece of mail to the calendar; still frozen after forcing them to leave... using OS X v 10.9.5

    Get the error that civilian could not be refreshed... requires a force quit and then when reopened, get the same message

    Try restarting your Mac in safe mode:

    -Stop your Mac

    -Wait until your computer turns off and after that press the power button

    -Just after you hear the startup tone, press in and hold the SHIFT key

    -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

    -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

    -Click on the disc to check, then, if requested to solve the problems on the repair disk

    -After that click on verify disk permissions, and then click Repair disk permissions

    -Once the process is complete, stop your Mac and turn it on again after 30 seconds

    I hope this helps!

  • Tecra S11 BSOD after trying to install BIOS v3.1

    Tecra S11 BSOD after trying to install BIOS v3.1

    I have reinstalled all utility fingerprint successfully. After that I tried to install the new BIOS v3.1, but I got the BSOD
    Win 7 pro
    Where can I find the minidump to see what file that are the problem?

    C/windows/minidump folder is empty.

    Hello

    Do you get the BSOD during the BIOS update procedure?
    Are you using the Windows operating system preinstalled Toshiba? or did you install your own system?

    If you have installed your system, then you should check that the VAP is installed as well.

    Also, I found this info about the update to the BIOS:

    + Attention! +

    + Please close all applications before running the update. +

    + At the end of this process, the computer will be restarted in order to update the EC. +
    + While updating the CE, the screen will not appear and the power LED etc can blink. +
    + The computer may restart several times. There is no abnormal behavior. +
    + Please wait until the computer is restarted fully. +

  • win xp sp3 restart after trying to install edimax ps-1216u for printer laserjet p1102

    win xp sp3 restart after trying to install edimax ps-1216u for printer laserjet p1102
    I have the printer installed that tried to install edimax ps-1216u and when it tries to install the printer, the computer restarts

    Problem solved! I have disabled smart installation with SIUttility for this computer. I have manually installed the printer by adding the port tcp/ip standard and all is ok now.

  • STOP STOP 0x0000008e error error messages appear after trying to install Windows XP on the new drive

    Original title: Stop error 0x0000008e error displayed after trying to install Windows XP on the new drive

    STOP 0x0000008e error. Also setupdd.sys - address F740DFEA base at F73EC000, Datestamp41107c8f. After trying to install Windows XP on a new hard drive. Never been in the BIOS. A bit afraid to change much, but it is said that the caching and shadowing should be turned off and boot into Safe Mode, but I cannot get Safe Mode because there is no OS on the drive. Also, he wants to know if I want to install Windows XP to a partition on the disk. I looked at other readers, and there is a partition, so I think I should. Any information would be appreciated. "Just an old fart."

    Hello

    See the following article: error message "STOP 0x0000008e" during the installation of Windows XP

  • After trying to install the updates. my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer.

    Visa update problem

    After trying to install the updates.  my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer.  I tried to follow the instructions provided here because it seemed to be the same problem.  But when I restart and hold down the F8 key so I can boot into safe mode, I tried selecting safe mode and I get the same results, and I tried again by selecting the option 'Disable automatic reboot' which seems to be an option on the same page with the option of safe mode.  Whatever it is, the same message comes back and I can never get to where I can see my desktop to click 'start '.  I can't get out of this cycle.  I installed the update because it said I needed to install it.

    *************************************************************************************************************************************************

    Turn off your computer by holding the power button for about 20 seconds.
     
    Start your computer in safe mode: press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears
     
    Disable the automatic restart in the event of system failure:
     
    • Click Start
    • Click on Control Panel
    • Click on system and Maintenance link.
    • Click on the system link
    • In the left pane, click Advanced system settings
    • Locate the startup and recovery area, click the settings button.
    • In the startup and recovery window, uncheck the box next to automatically restart.
    • Click OK in the startup and recovery window
    • Click OK in the System Properties window
    • Close the system window
     
    After that... While STAYING in safe mode I do a system restore and maybe try a manual install of the update later.
     
    For the sake of space I refer you to the article about how to proceed.
     
     
     
    Please let us know if this solution works for you

    Theresa
    Microsoft Answers Support Engineer

    Hello

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  • After trying to install a specific program, I get this appcrash, check the event log,

    * Original title: app Crash

    In general, I store my programs on a USB key. I've never had a problem installing or running

    install them on my computuer using windows 7 home edition 64-bit.

    Lately after trying to install a specific program, I get this appcrash, check the event log.

    It seems to say that the file for this installation is damaged, but how can this be since the installation has worked before?

    Get corrupted - it happens.  Jump drives die all the time.  You might be able to reformat (erase) and get more life out of it, or you can get a new USB, install again and use it until it is damaged again.

    Average life of a disk is 5.2 years, but just like people, many drive die younger and many die older. You never know what will be yours.

  • After trying to install word printer epsom has not stopped workung - uninstalled but stll not working not

    After trying to install a printer, Epsom SX130, on Windows 7, WORD has stopped working - have tried uninstall & restore but still cannot use WORD. After paying only £ 65.00 to restore the office, I'm very unhappy. It is the only document that we need to print, others may be sent by e-mail, but now I can't even open Word documents to use as attachments to an email. I'm totally desperate, do we buy a 'small' I wonder. More than 60 years, when I started it, maybe I was just too old or it's Windows 7 just make my / our life uncomfortable for us to update: Please keep in mind, I'm very, very, ridiculous with computers. We have done with a drive by the way if that makes a difference & downloaded an update. If the answer is "not compatible" that's fine, I can make documents on the old computer, BUT need words for emails: i.e. repeat orders etc. which are vital to our system of new physicians.

    Am totally fed up now...

    Hello

    1. what version of Microsoft Office are you using?

    2. you receive an error message when you start Microsoft Office Word?

    You can perform the system restore the computer to the date when the changes were made not (before the date where Microsoft Office was working fine).

    System restore

    http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

     

    NOTE: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    For further assistance on the question, you can post your query in Microsoft Office community:

    Microsoft Office community

    http://answers.Microsoft.com/en-us/Office/Forum/Office_2007

    It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  • After trying to install Windows updates, my computer turns off.

    I tried to load 2012 ARO.   In the end there was a request to restart my computer, so I left closed... it has been slain on the third phase of the judgment since then.  Support ARO said that it's a microsoft issue, not a question ARO.  I tried to restart in SafeMode known last... but who doesn't have a wok.  At out the battery, disconnected it, everything that I could think of and nothing works.  Help, please.

    original title: don't stop after update

    (1) never install two security systems on the same computer because of the possibility of conflicts like this.  Norton may have similar tools to what you were trying to install.

    During the validation of the subjects as that one, don't forget to post your operating system of Windows and the computer make and model.

    Recovery discs are here with your system?  Alternatively, did you create recovery discs?  Have you created a boot disk?

    (2) by changing the boot order, you can force your computer to boot from a CD/DVD drive, a floppy, or even out of the network drive.  Use the startup disk or recovery disk if you have one.

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

    If the answer to the above is failed.

    (3) reboot and start typing the F11 key

    Y at - it a recovery screen?

    Follow the prompts

    Select fix my PC

    Description of the Windows XP Recovery Console for advanced users

    http://support.Microsoft.com/kb/314058

    If the answer is still no, you need to get the site of the manufacturer of the computer recovery discs. I think that you will be able to order Windows Vista or Windows 7 but Windows XP is rained on many sites and an internet search may be more useful in this case.

    How to get the installation discs for Windows XP for installation of boot floppies

    http://support.Microsoft.com/kb/310994

    Bing search engine

    http://www.bing.com/shopping/Microsoft-Windows-XP-Professional-with-Service-Pack-3-32-bit/p/7EC2D538C44375E9D976?q=sale%3A++Windows+XP+&lpq=sale%3A%20%20Windows%20XP%20&form=hure

    Recover Windows Vistsa operating system using HP Recovery - (relates as well to Windows XP)

    http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c00809678&product=18703

  • Error 800b0100 code after trying to install KB2416470

    I tried to install this update of security for some time now. I tried to install the analysis TOOL and I still have this problem. Also, I rebooted the computer and tried to cut the firewall so to download. Always down. Whats up with that?

    I guess I'll mention that I have a Windows Vista HP laptop X 86 - based PC still ruin on the Service Pack 2 due to this update has failed.

    LaurainFlorida,

    First, configure the computer to start in minimum mode - How to solve a problem by performing a boot in Windows Vista or in Windows 7

    NOTE: in the Clean boot state all the 3rd party firewall will be disabled. Make sure that the native Vista firewall is now activated by clicking on the start ORB, in the Start Search field type in the fire. Under, click on Windows Firewall to ensure that the programs that he is now.

    When you have restarted, it as a clean boot, click the round of departure.
    In the field type to find in the programs.
    Under programs, click programs and features
    Click once on the Microsoft .NET Framework 3.5 SP1.
    In the Menu bar, just above the list of programs, click Uninstall/Change. Accept the UAC prompt.

    Wait for the window to load and then make a mark next to repair, then click the next button.
    If the repair operation is successful, Cancel the boot minimal steps nowand restart the computer.

    Download and Save KB2416470.
    Security Update for Microsoft .NET Framework 3.5 Service Pack 1, Windows Vista Service Pack 2 and Windows Server 2008 Service Pack 2
    Because it is the correct update for your computer, click the button download next Windows6. 0-KB2416470-x 86.msu .

    When the download is complete, close all open programs, applications and browsers.
    Now install Windows6. 0-KB2416470-x 86.msu
    Restart the system, if you are prompted to.

    If the failure of the repair operation, you must uninstall Microsoft .NET Framework 3.5 SP1, reboot, then download and Save .
    Microsoft .NET Framework 3.5 Service Pack 1

    Suggest that you leave the computer in clean boot configuration when you do the above.
    After that .NET Framework 3.5 SP1 installs, Cancel the Clean boot as follows.

    After you restart the system, updates for the .NET Framework 3.5 SP1 should be revived to him through Windows updates.
    If all goes well, they will install now.

    MowGreen
    Expert in Windows IT Pro - consumer safety

    * - 343-* FDNY
    NEVER FORGOTTEN

  • Cannot start Windows after trying to install the Vista SP2

    I just tried to install Vista SP2 and now whenever I try to turn on the cpu it gives me a blue screen and restarts. It does allow me to start in SafeMode either. In addition, it seems to be impossible to find my restore points. I was able to stop the screen using the F8 menu and it gives me this error on the blue screen

    STOP: 0X0000007E (0XC0000005, 0X81C223BB, 0X803998F4, 0X803995F0)

    For some reason, when I go to the cmd prompt to advanced troubleshooting guide, I can do, he says that I am the X and not the C drive, if that has something to do with my restore points does not.

    I tried to get the menu of the restoration on C manually through C:\windows\system32\restore\, but nothing was there.

    Any help would be appreciated. I will not lose rather all my data in a reformat.

    Thank you
    Matt

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you installed SP2?

    A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?


    0X0000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
    A system thread threw an exception who did not catch the error handler. There are several individual causes for this problem, including the hardware incompatibility, service driver or defective peripheral system or software problems. Check (EventVwr.msc) event viewer for more information.

    Source: http://aumha.org/a/stop.php#0x7e


    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

    Common exception codes are:

    0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.     [emphasis]

    Source & more: http://msdn.microsoft.com/en-gb/library/ms795746.aspx

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; ( Problems after installing a service pack).

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Problem with starting after trying to install XP.

    I have a Samsung NF110 netbook with an external cd drive. The hard drive has two partitions - c: and d:. C: installed Windows 7 and d: was empty. I wanted a machine to dual-boot with Windows 7 and XP in different partitions. I tried to install XP on the d: partition but during installation only choice was installed on the c: partition (replace Windows 7). I decided to do it and then I hope to install Windows 7 on the d: partition later. The installation process copied all files XP from the CD, but when it came to restart it has always tried to boot from the cd and start the implementation process. I tried to remove the cd drive, and then it came with NT invalid Boot.ini detect failed. I tried various suggestions found on forums to fix this. The most popular seems to be to get to the Recovery Console, and then type bootcfg/list and bootcfg /rebuild. When I do bootcfg/list it shows a Microsoft Windows XP Home Edition installed. However after the rest of the instructions for example enter the loading and do/fastdetect identifier does not solve the problem. Someone at - it any other suggestions to correct what I guess is an MBR corrupted. Wouldn't be better to just format the entire hard drive and start from scratch?

    Thanks in advance for any help offered.

    http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

    You must install the oldest OS first, so XP first then win 7. XP doesn't know how to run win 7, so if you install after win 7, you will lose the ability to boot under win 7. A repair of Windows 7 installation can fix.

    install xp and when you do, be sure to create 2 partitions, one for xp and one for win 7

    http://apcmag.com/how_to_dual_boot_windows_xp_and_windows_7_xp_installed_first.htm

  • HP Pavilion ze4900: blue screen of death after trying to install Windows on Pavilion ze4900?

    After the death of my hard drive in my Pavilion ze4900, I replaced it with another hard drive for laptop, I had laying around.

    I also tried to install Windows XP Home from a Windows installation CD, the same OS, the laptop had before the hard drive died.

    Everything is going well until the laptop has been made all the installation files, instead of giving me the opportunity to install Windows or repair Windows, the laptop will eventually show me a blue screen with the message:

    "A problem has been detected and windows has shut down to prevent damage to your computer.

    What can I do to fix this? I installed Windows XP on another computer using the same CD, so the CD disappeared not corrupted and replacing the hard drive is hardly used.

    Any help would be greatly appreciated!

    @zenvo2015,

    Hello and thanks for the display on the HP support forums.  The first thing you want to check is if there are any problems with the hard drive that you put in.  Run BIOS diagnostics for the drive and the equipment to make sure that there is no problem.

    Laptops HP - diagnostic system (F2)

    And.

    HP Notebook PC - test a hard drive from BIOS

    Please let me know how things are going.

    Thanks again for posting and have a great day.

  • After trying to install updates error 80070643 # appears

    Continue to receive the error code 80070643 # after attempting to install updates. Update for microsoft Net Framework 4. Have tried several times to update with

    without success.

    Windows Update error 80070643 http://windowshelp.microsoft.com/Windows/en-US/Help/e5304fc1-9264-4d97-9c35-3c3ad167e1701033.mspx>

    UTC/GMT is 16:48 Thursday, September 1, 2011

  • my computer went non responsive after trying to install windows 7

    My office while trying to install windows 7 has stpped answer after 1 hour, still nothing 1 hour later, approximateley ideas?

    Start by unplugging devices external, discs additional (just leave the reader who connected Windows installed. For laptops to ensure that you are connected to an electrical outlet and not running off the battery voltage.

    J W Stuart: http://www.pagestart.com

Maybe you are looking for