Trying to install wireless router WRT160N

Similar Questions

• I am trying to install my router nexxt_1DC2AO wireless, but cannot get connected after installation

  I have a Nexxt_1DC2AO wireless router, I installed it and it went through, but when I try to get a connection I get a message saying that windows could not connect to Nexxt_1DC2AO

  Hello

  See the following Microsoft article:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Just installed wireless router... advice nned to change settings

  Sorry if it's a sore subject. I tried to use the search function and did not understand what ppl were talking about anyway... Here's my situation:

  I had to install a new wireless router today and fortunately I got a new Linksys sitting in the closet that I got a year or two ago. It is a model BEFW11S4-VN.  The notice said just to watch the 'user's Guide' which is located on the boot CD if I want to change my settings. I did it and it was as much help as the famous Windows 'Help' button :/

  In any case... How do the settings of this device box?

  Thank you

  Thank you

• Re-setup of printer after new installed wireless router.

  Having recently installed a new wireless router, that I had to reinstall my Photosmart B110a as I did not see the printer on Apple devices using the router.

  There are 2 Intel MacBooks, 1 iBook G4 and a PowerBook G4 all work OSX 10.5.8 plus an office of G5 running 10.4.11 on this router.

  I installed the driver but when I try to add the printer I get a dialog box requesting the "Ipadmin" username and password.

  I don't, as I remember, put in place a group skinning Ipadmin and I was wondering if anyone else had come acrosds such a request?

  Is this useful? : http://support.apple.com/kb/TS2754?viewlocale=en_US&locale=en_US

• DMA2100 is frozen after trying to install wireless

  I tried to connect a new DMA2100 to my VMC and now it is completely frozen, locked, hanging, etc.  The initial screen will appear and you can window around during about 5 to 10 seconds, but then the device is completely insensitive.  I was wondering if it was a bad camera, I brought another House and it's the same thing.

  Here's the background, I tried to run the installation program to use wireless initially but the DMA2100 would simply wants it "search".  I was never able to screen so I just unplugged the device, which would lead to a repetition of the same loop.  I found a thread that said having the same questions that has been set using cable and update the firmware.  I've updated to 1.1.6 and then was able to complete the configuration and use the functions of the Extender.  As a result, I restore to its factory default condition, disconnected from the power, and disconnected the cable ethernet with intentions to go wireless.

  (Remember, it's about two units) When I turned on the unit (s) back, I noticed as the default splash screen does not pop up but rather the main screen which has 'Settings' or 'SFBC '.  Nevertheless, I followed through "settings" to run the installer again and choose Wireless this time.  Once more, it froze just.  I even waited all night on a single unit.  This time, when I recycled power to the capacity of the facility, they arrived in the State where I can only window autour for literally 5-10 seconds until I can do it without more (I waited all night for that to change too).  I tried the 'soft' reset (5 seconds the reset button) and the hardware reset (holding company of discount for 10 seconds power, break of 10 seconds and 10 seconds on).  None of this changes anything.  Within 5-10 seconds, I can window autour enough in 'settings' to see that it is a "wireless" network management mode  But I did not have enough time before it crashes to change anything.  My finger on the distance from the lock time was fun the first 10 times I tried.  even when I thought that I managed to change something, it froze again.

  I can't believe there is no real way to reset this (USB port?).  Literally, these units cannot do anything now.  I'm still waiting to hear from Linksys, but I thought that I would like to probe for any input...  I am actually very happy with all of my other Linksys products, but the quality of these units is really shocking;  I guess that's why there is a fire sale on these nowadays.

  Workaround is to disconnect the antennas while the implementation. Also, be aware, that the wireless MAC address is different from the MAC address on the serial number sticker. If you use filtering of MAC address of your wireless router.

• Connecting Wireless Router WRT160N error message

  This is the report on the progress of the errors after the diagnosis of my connection, I received. Everything I tried to do has not solved my problem. Help, please! Thank you

  Event (class of assistance RNWF MSM) helper class:

  Wireless Diagnostic Helper class event

  For all the info on this session, see the Wireless Diagnostic informational event.

  Helper class: Native WiFi MSM
  Initialize status: success

  Information for a diagnosis of connection
  The GUID of the interface: 0c5fedf8-83c2-45eb-a664-bc2385294b58
  Name of the interface: Intel (r) Wireless WiFi Link 4965AGN
  Interface type: Native WiFi
  Profile: DaveJeremyCameronBen
  SSID: DaveJeremyCameronBen
  SSID length: 20
  Connection mode: Infra
  Security: Yes
  Connect even if the network is not broadcasting: No.

  Result of diagnosis: problem found

  Root cause:
  The wireless settings of the adapter on this computer do not match the parameters of 'DaveJeremyCameronBen '.
  The selected data rate is not correct.

  Detailed root cause:
  802.11 connection failed due to status 18 code: Association denied due to the station asking does not support for all data in the BSSBasicRateSet parameter rates

  Repair option:
  View the settings of the adapter wireless network on this computer to verify they are compatible with this network
  If you set up or own this network, you might be able to solve the problem by changing the settings about to access or wireless router to be compatible with the settings on this computer. Contact the network administrator for "DaveJeremyCameronBen" or your hardware manufacturer for assistance.

  Event comments: 0

  I think that there is a profile saved on your wireless computer.

  What is the operating system on your computer?

  Delete the profile on your wireless computer. I think you are using the wireless adapter intel on this computer.

  Open the Intel wireless card utility. You will find the profiles saved on your computer. Delete the profile of wireless network you are trying to connect.

  Now, open the wireless router configuration page. Go to the wireless tab and check the name of the wireless network. Click the Wireless Security tab and check the wireless security settings. Make sure you have the key/password network correct.

  Now try to connect to the network again.

  If it's windows XP operating system, then you can also connect to the network wireless using windows wireless network utility.

• Wireless router WRT160N cable on the desk, I loose internet when the laptop is turned off.

  I have wrt160n v2 router wireless, it does not work for me.

  If my wireless XP laptop is only powered ON the Vista desktop internet wired connection works, I'm not wired or wireless using laptop computer, not on the internet, only power.

  If the laptop is turned off, I have no internet on the desktop, always connected via the router.

  The laptop is used and I didn't know if the without built-in thread was pretty new, so I bought a card to go in wireless.

  When everything is on everything is to play on the internet times two computers, but if you turn off the laptop I have to connect internet directly on the Office to continue in the internet.

  I started working with a tech support yesterday and they are difficult to understand. I had put in the new firmware and the problems persist.

  Can someone help me, I don't really have time to be on the phone for hours figure this all out.

  Thank you

  Jackie

  go to http://audipages.com/router/ and follow the instructions

• Trying to install wireless HP 7510. Running wireless Cisco, WIN XP and WIN 7 OS (and iPhone).

  Just bought the 7510 - tried the automatic installation and he got a 169 IP address (my ISP gives us the addresses in the range 24). I can ping the printer, but not print. I tried the manual installation of the TCP Port, but after you enter the IP address, I get an error saying that it cannot detect the device. Ideas?

  Back to basics. I turned off the printer, AP and cable modem and count to ten.  Connected to the cable modem, let it sync. Branche plugged in AP, let it sync (confirmed by the work of PC), connected to the printer - he caught a 24 IP via DHCP.  The only new thing here has been disconnected the cable modem. Not sure why the printer would not forget the 169 address and not know not why the modem cable would not provide an IP address, but it works now.

• HP Pavilion p6-2143w: is HP Pavilion p6-2143w require an adapter connect a wireless router

  2 days now trying to install the router, Asus RT-N66R to my HP Pavilion p6-2143w, my people server says I need an adapter?

  Impossible to see if that answers the problem, works without interruption until next week, when I'll go buy an adapter for it and I hope to solve my problem and will have wireless!   Thank you

• Change Wireless Router WRT54GS to a new PC

  I just bought a new PC and would like to transfer the router to the new. What is the best way to do it? I have to reset the router, I have tried to install the router on the new PC (with CD) and received an error that it is reading my old one (the same).

  Thank you

  JC

  You don't have to change anything on the router. You don't need the CD of configuration that came with the router.

  Wire your PC for the WRT and that's it.

  If you want to connect wireless and then find your network and you connect. Enter your password and everything is ready.

• Linksys Router WRT160N - Wireless does not connect to the cable modem

  I installed the Linksys WRT160n router to replace an existing G router. When installed the new wireless router works, but the router does not receive a connection (IP address - look under status) of the cable modem (so no internet). When I reconnect the old router and then connect the new router, I get any internet connection through two routers (so the old dishes router the IP address that accepts the new router).

  I have configured the router N new for

  "Automatic configuration - DHCP", no need for connection, IP address dynamic, etc (as required by ISP - Timewarner)

  I tried to renewal and release IP address by the router N when it is connected directly to the main switch (the switch to connect to the cable modem). In so doing, shouldn't that assign a new IP address to the router?

  I am allowed 3 IPs from the cable company (because of the switch) and I use all three with three different internet IP cameras to each address for home security system.

  Any suggestions on why the router is not connecting to the internet? Do I need to reboot physically everything on the network, including the cable modem?

  If I understand your post, you said that your ISP gives you 3 Internet IP addresses and you have 3 cameras that use one of these Internet IP addresses.  If this is correct, then that leaves no IP Internet address for your WRT160N use - so that would explain why your WRT160N cannot get an Internet connection.

  If I misread your post, and you have an Internet IP address available for the WRT160N, you might have a problem with your modem and two WRT160N tries to use the same 192.168.1.x subnet.  To check this, follow these steps:

  (1) Please indicate addresses that use your cameras (IE before you take the test below).  If the addresses do not begin with 192.168, then erase the last half of each address.

  (2) Please indicate your ISP

  (3) Please indicate the make and exact model of your modem (not the WRT160N) number.

  (4) Please do the following test:

  Put your entire network.  Disconnect the switch (including cameras) to the modem.  Using an ethernet cable, connect your modem directly to your computer.  (Do not use the WRT160N for this test).  Turn on the modem and the computer.  Make sure you have an active Internet connection, then go ahead with what follows: (even if your Internet connection does not work, include this and move forward.)

  Go to 'Start' > all programs > Accessories > command prompt.
  A black DOS window will appear. Type "ipconfig/all" (with no quotes), and press the Enter key.   Copy all results in your next post.  To make the copy, highlight the results, and then use the keys copy (Ctrl-c) and paste (Ctrl-v) keys.  If your "IP address" does not begin with 192.168, then for security reasons, delete the latter half of your IP address.

• Try to install Net Gear Wireless router to work with my laptop. It keeps telling me that my domain name is a question.

  I'M TRYING TO INSTALL A WIRELESS ROUTER FOR MY LAPTOP, THE ROUTER IS NETGEAR, I ALWAYS GET TO THE POINT CONNECTING DOMAIN IS THE ISSUE.

  original title: ARTICLE 871122 WZC

  I think you've got the third-party software installed on your laptop to configure the wireless adapter. Third-party software seems to have disabled the Wireless Zero Configuration (WZC) Microsoft service. You will need to reactivate it.

  Follow the steps below to activate the automatic configuration on your laptop.

  1. Click Start, click Run, type % SystemRoot%\system32\services.msc/s, and then click OK.

  2. double-click on Wireless Zero Configuration.

  3. in the startup type list, click Automatic, and then clickApply.

  4. in the Service status area, click Start, and then click OK.

  Software configuration of certain wireless adapters removes the automatic configuration service. If this is the case, you can try this fix by changing the registry value.

  WARNING: Editing the registry can be dangerous, use it at your own risk.

  1. click on start - run and type reg. And then click OK.

  2. browse this registry key: HKEY_LOCAL_MACHINE es\WZCSVC

  3. next, create a DWORD value and name it 'Start' and set it to 2.

• While trying to install a Linksys E1500 he repeats that my computer is not connected to the router.

  Computer problems and the router

  I have a windows xp 2002 with service Pack 3. While trying to install a Linksys E1500 he repeats that my computer is not connected to the router. Ive tried a new cable and it does not solve the problem. He also said that my computer does not have wireless capabilities. Any suggestions?

  You'll be much more likely to get useful (or even possible) suggestions if you provide the full text of the error messages you get, without paraphrasing.

  For example:

  He repeated to me that my computer is not connected to the router. --> What is the real error message?

  He also said that my computer lacks wireless capabilities--> what is the error message itself?

  You are "trying to connect via a cable" to the router or you're talking about your Internet service (for example, the router is connected to the Internet via a cable)?

  You think that your computer has "wireless capabilities?  Open the Device Manager (start > run > devmgmt.msc > OK), then click on the + sign next to "network adapters."  Please provide the names of any devices listed there.

  Is your computer without a name, a laptop?  There a name of brand anywhere (for example, Toshiba, HP, Dell, etc.)?

  Open System Properties (start > run > msinfo32 > OK)
  Click Edit > select all
  Click Edit > copy
  Right-click in your response here and select Paste
  Be sure to hide the "System name" or "User Name" if it makes you feel better, but please do not remove anything else.

• I can run router WRT160N wireless switch wireless E900

  Recently the range of my Ipad has declined. So I bought an E900 to suplement my WRT160N (2 areas served by two different wireless).

  My question is can I connect my modem cable in the E900 and have both the wireless on this work and feed the WRT160N via a wired connection so that the WRT160N can also act as a wireless router?

  If so what needs to be done as I tried to connect them without the Linksys E-series installation CD and it did not work (surprise ;-()

  JB

  Sure here ya go.

  http://KB.Linksys.com/Linksys/UKP.aspx?pid=80&login=1&app=search&VW=1&articleid=3733

• Trying to install the network wireless, but not can not find the installation CD

  I would like to get another CD to install a wireless network for router wrt160n v2. I rest the default router. Prefer to download the installation CD Assistant if possible.

  Thank you in advance for your help!

  You don't need any CD for install/access to the router.  Go to 192.168.1.1 with a computer wired with your browser.  Username blank password, "admin". Now, you can configure the router manually as all.