Trying to replace the clock usbConnectionStateChange

Similar Questions

• Problem with the INF file trying to replace the USB mouse

  I am trying to replace a USB mouse that works but sometimes gives me double clicks rather than alone. But all the attempts to have it translated into the same error viz:

  "The driver for this device is missing a necessary entry, maybe it's because the file INF was written for windows 95 or later." Contact your hardware vendor. »

  The mouse I'm replacing is an optical mouse of Trust and so far I have tried 3 other optical mice - an ASDA brand, a Dell and a Logitech Value Optical Mouse. All with the same result.

  All the mice tried claim to be plug-and-play compatible with Vista (Home Premium installed). None came with the drivers and the last Logitech there is no download associated with it - I don't think this problem of the manufacture.

  Any ideas anyone?

  Old Man River,
  Thank you for visiting Microsoft Answers community forums.

  To run the checker system with administrator rights files follow these steps:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type the following line and press ENTER:
  sfc/scannow
  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  If that does not resolve your problem, try going into Control Panel configuration, Device Manager, expand the device of Interface Group.  Right click on all of the mice that appear there and uninstall.  Restart the computer and that he should find Windows driver and install it.  If it is not the case, go to Device Manager, click the view menu, click Show devices and see if there is an other mice which do not arise before.  If so, delete them and restart again.

  Please let us know the status of your question.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion HPE h8-1330z CTO: video card dying fan, tried to replace the card, the computer does not start

  This Pavilion comes preinstalled with a nVidia GeForce GT 630 graphics card. The fan on the card goes bad - the card smells "burny" when I run, the fan works really hard and the computer crashes while playing graphics-heavy games.

  I tried replacing a PNY Verto GeForce GT 730 2048 MB DDR3 card. But now, with the Verto installed, my flag starts, it crashes just on the HP splash screen. I can not start safe mode nor can I access the BIOS settings.

  Care of the Verto seemed to think it would work in my Pavilion - PCIe 2.0, at least 300W PSU. I searched online for help but can't find a solution for my problem.

  Any tips?

  I checked the support page for my Pavlillion and I noticed a updated driver for my computer's BIOS. I installed and it seems to have solved the problem.

• I tried to replace the start page in Firefox with my own choice of several times home page and will not be defined - I get the circle with the slash through it, when I try to drag the icon of the Web page at 'home '.

  I use Windows 7 Professional and have tried all the tips troubleshooting recommended for this problem. I don't have the new version of Firefox installed, because he had all kinds of problems, so I went back to the version that I had--I believe it's 3.6.24. Since then, I have not been able to define a home page. Any help out there? Thank you!

  Try to drag the tab or the favicon of the site on the Home button if currently drag you selected text.

  If this does not work with dragging the icon and then copy the URL to the Clipboard and paste it via Options window in the area of the home page.

  • Tools > Options > general > startup: Homepage

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Tried to replace the video card integrated with card pci-e x 16 and lost audio - help please

  Is this normal - when you replace your car video with a pci-e video card you would lose your sound.  The system I have is a Pavilion a1450n and has 3 pci slots and 1 pci-e.  I changed the pci-e video in the bios and everything is fine, but no sound at all.  When I took out the card then I would sound.

  Please help.

  The former system of video seems to give me a little trouble.  He keeps hide and freeze from time to time.  Don't know when that will happen.  But when this happens, a blue screen it freezes or just blanks out and comes back.  It will happen nobody knows.  Everything else works fine.  Hate to give up this old gem - for a lot of software installed to lose.

  Thank you all very much for help.

  William

  Hi, William.

  Yes, when you have an old PC where the BIOS does not have HDMI.

  Your PC thinks that you have installed a sound card and a video card because of the HD audio chip on the video card.

  Thus, he disabled the integrated audio system.

  The fix should be easy...

  Go into the BIOS of your PC, look at the options menu and find the onboard audio setting.

  It will be set to auto or off.

  Change the setting to "Enabled". Save the configuration it and yet when you go out (save the settings and exit).

  When you restart, you should have the back of Board.

• HP G6-1b60us: Laptop doesn't work anymore after trying to replace the top cover

  Disregard this message. I solved the problem. There is a piece of Ribbon that is connected to the switch that was not plugged in. Thanks anyway.

  Thanks for sharing the information.

  Good day!

• HP Jet 11-d010nr: compatibility of replacing the screen

  I am trying to replace the screen on the stream Hp 11 - d010nr of a laptop HP flow 11-r014w. Is it possible to make it work?

  Hello

  Number of screen for HP stream 11 part -rnnnaa machines is 834445-001:

  http://PartSurfer.HP.com/search.aspx?SearchText=834445-001

  It is not compatible with HP flow 11 -dnnnaa machines.

  Kind regards.

• Replacing the motherboard on the Satellite L750 - 16 X

  Hello

  I am trying to replace the motherboard on a L750-16 X. I think that I need this A000080670 card, which is available. Under the RAM slots the sticker says A0000806709B141422W. I'm not sure of what the average figures and additional letters and I was wondering if anyone knew if it is compatible.

  Thank you very much

  Unfortunately, it is not easy to help you with this. As you probably know it's user forum for this kind of info is not easy to find.
  I don't know where you want to get the new motherboard, but if you want to buy it by some authorized service they should now what they offer.

  I don't know if anyone here has the same machine and can help you with this. What you can try is to contact the nearest Toshiba service provider in your country and ask for help.

• ProBook 6440 b: replace the HARD drive with SSHD on HP Probook 6440 b

  Hello
  I am trying to replace the drive HARD original (Seagate Momentus 320 GB at 7200 RPM) with new SSHD (SSHD Sagate 500 GB;) REF: ST500LM0000). I've updated the BIOS without any problem for the F.60 Rev.A version (November 30, 2015). The operating system, I try to install from the DVD is Windows 10.

  Problem is that the installation process of Windows this new disc see. At the step where you set up new partitions, the disk is not visible.

  The installation process of Windows is an option to load drivers for the drive. It may be enough to have a driver. But I don't know which driver to use.

  Could you please tell me how to correctly install a new drive? BIOS is somehow locked on the original disk? Or in what could be the problem?

  I thank very you much for your time. I'm sorry for my bad English.

  Lukas

  In the BIOS, try to assign device SATA AHCI Mode.

  It's under Advanced > device configurations

• Replace the card wifi Atheros on Satellite A210-12 q (PSAELE)

  I tried to replace the Atheros card build-in with an Intel Pro Wireless 3945ABG LINK: [http://www.intel.com/network/connectivity/products/wireless/prowireless_mobile.htm]
  But for some reason any machine does not see the card.
  I tried with three types of Intel IPW3945ABG cards and none of them has been recognized by my computer.
  Is the cards intel not "compatible" with my computer or come into conflict with other hardware components.

  The card Atheros build does not work under Linux (it works quite :-(), so it is very important to me, to get the Intel working on my computer card.

  Hello

  the problem is that your computer has an AMD processor, so if you try to install a WLAN Intel card who needs centrino technology that is ONLY taken in CHARGE by the Intel platforms, then your won´t machine recognize the card. To answer your question: the map you´re trying to install is not compatible with your system.

  I wonder why your card is not working properly under linux, I have 2 machines with integrated atheros cards and they work like a charm (Ubunutu and Gentoo).
  So if you describe where the problem is so we can perhaps find a solution and you should not try to install a card intel...

  Welcome them

• Portege R700 how to replace the keyboard

  Hello!

  One of the keys on my R700 R700 laptop model PT311A-00Y00Q has a broken key. Apparently, you can get spare keys, so I need a whole new keyboard.

  I found this on EBay: keyboard http://www.ebay.com/sch/i.html?_trksid=p5197.m570.l1313&_nkw=Toshiba+R700+ & _sacat = 0

  But I can't find a guide to replacement of the keyboard, would you mind linking me to a guide?

  Thanks in advance.

  I've read some reports of users who have tried to replace the keyboard on the R700 and it's not very easy.
  It s difficult because you will need to remove the other parts like the
  Battery, sim card, express card slot, modules of memory, base Assembly to gain access to a
  Ribbon of aluminum on the back of the lid Assembly. Then you could cut the lid Assembly face to the top and peel the keyboard joined the insulator.
  And also you can not use the keyboard removed and isolator keyboard again. You will need to use new parts

• CD-ROM error at the start after replacing the DVD drive - Qosmio F20-574

  OK, so I have a Toshiba Qosmio F20/574 and I am trying to replace the factory DVD player (TEAC DV-W28E) with a Liteon DS-8A1P (f/w CX12). With or without a DVD Im reader get a CD-ROM error at startup. The only time where what I don't get, is when I start with the factory DVD player.

  Here are the things I've tried...
  -Cleared CMOS memory
  -Remove the bezel to ensure his grip at bottom
  -l' utility EEPROM set the drive to slave.
  -tested the portable player in another
  -uninstalled the factory dvd player via the Device Manager and tried to boot with the new dvd drive

  Here are the things that I found bizarre...
  -in the BIOS (BIOS 1.30 ACP) under IO device, it shows the hard drive and cd, but it is not listed by name, his watch only the IRQ of the primary and secondary IDE controller (integrated drive HARD IDE primary (1F0H/IRQ14), CD-ROM (170 H/IRQ15) secondary IDE). This does not change, even if I start without a DVD player.
  -There is no update available for this laptop BIOS. It is a Toshiba of the Japan and the Ive tried using Qosmio F20 BIOS 1.40 to another region, but this does not work.
  -I can't find a firmware for the Liteon DS-8A1P (CX17) update

  I can't think of anything to try. I really need help! Any ideas?

  I'm afraid that you are using the optical disc drive not compatible and there is nothing you can do. Check it please s user guides document for your model of laptop and you will find a list of all compatible ratings.

• Replace the print cartridge 8600

  I am trying to replace the black ink cartridge.  When I open the door on the front of the printer, nothing happens.  The printer cartridge door does not move and is inaccessible.  The printer seems to be on.  The green light is fading power on and off.

  Hello saratoga1,

  Thanks for the reply!

  I'm glad to hear that you solved the problem with a reset of the power (in the above troubleshooting guide Solution). Please select "Accept as Solution" 2 Message above for other members of the community can find our thread to see the appropriate link to solve this problem.

  Thank you!

• If I replace the control with another why DAQmx create channel once complain a false claim?

  I tried to replace the frequency by another control in the example found here complete PWM:

  http://www.NI.com/white-paper/2991/en

  However, I get the following error message:

  

  Possible reasons:

  Requested value is not supported for this property value. The value of the property may be invalid because it is in conflict with another property.

  Property: CO. Pulse.Freq
  Required value: 0.000000
  Valid values begin with: 22.300000e - 309
  Valid values ending with: 20.0e6

  Channel name: Dev1/ctr0

  Task name: _unnamedTask<10>

  My wiring diagram looks like this:

  

  If I cancel my change (i.e. I have remove the frequency control knob and turn it over to the control of the example, it works perfectly.)  I get the waveform is displayed in the oscilloscope.

  My goal is to simply use a frequency and duty cycle control knob.  How can I achieve this?

  There are two things to do.

  What I think you did now changes the scale of the handle.

  You will also need to change the values that are allowed to enter. You will do on the data entry tab in the dialog button properti.

  Uncheck the 'use default', the Minimum value limits and Maximum identical to your balance.

  Value "Response to value out of range" Coerce to both Minimum and Maximum.

  I hope this helps.
  Let me know if you have more problems.

• Synchronize the clocks of 2 PCI cards for analog inputs with e/s digital reference

  I'm trying to synchronize the clocks of reference of 2 PCI cards so that the analog inputs are synchronized. However, my appilcation has also digtial e/s on two cards, and who apparently made the mistake DAQmxErrorResourcesInUseForRoute_Routing. This discussion describes a similar problem, but the solution was to just put the reference clock to the slave device, who had no other tasks running on it, so what mine does.

  Is there way I can synchronize the clocks of refernce without interfering with the digital I/o?

  Thank you!

  PS: My application is in C++.

  The reference clock is really a lower-level component that is shared by all resources on a given device.  All tasks on a given device must use the same reference clock.  So if you use DAQmxSetRefClkSrc for a task, you can use it to set the same value for your other tasks.

  Best regards