TS 2014 64-bit Results.TS.starttime

Similar Questions

• No screws daqmx in labview 2014 64 bit

  Hello

  I have daqmx 14.0 installed on my Win 64 bit PC and LabVIEW 2014 SP1 32 bit. Today I installed LV 2014 64-bit on my PC and I don't see any DaqMX screws under the section i/o measure. And when I opened my project compiled in 32-bit LV 2014 then computing begins looking for screws DaqMX and I point it to "C:\Program Files (x 86) \National 2014\vi.lib\DAQmx" but the daqmx vis are broken.

  When I click on the run button broken, the error list displays 2 errors:

  (1) VI couldn't carpule

  (2) external component or missing driver

  It seems that I need to install special drivers for daqmx, so I downloaded daqmx 14.5 of the or site and during installation when it asks the path is by default "C:\Program Files (x 86) \National" but I changed it to "C:\Program File\National Instruments\" and the installation program gave an error message that I can't install the 32-bit files in 64-bit folder.

  How to solve this error?

  Thank you

  Ritesh

  LVCoder wrote:

  So should I just uninstall daqmx from my PC and re-install again. or do I uninstall labview and daqmx together and then install daqmx and labview?

  Reinstall everything DAQmx.  It will install only the parts you need, in this case, it should just be support for LabVIEW.

• Cannot install Datalogging and supervisory 2014 control with labview 2014 64-bit Module

  Community salvation OR

  I installed labview 2014 64 bits, then I tried to install Datalogging and supervisory Control Module 2014

  http://www.NI.com/download/LabVIEW-datalogging-and-supervisory-control-module-2014/4848/en/

  but a display of error messages "labview 2014 must be installed. What I have to install labview 2014 32 bit, is there another solution

  In addition to morem, try installing real-time 2014

  http://www.NI.com/download/LabVIEW-Real-time-module-2014/4832/en/

  an error message display "labview 2014 32 bits must be installed". is there any version for 2014 lv 64-bit

  Thank you

  The compatibility matrix is here.

  You must install LabVIEW 32bits.

  You have a specific need for 64-bit LabVIEW?

• Deployed Adobe CC 2014 32 bits to our neighborhood. Students launch Adobe Flash Professional and are able to start a project using ActionScript 2.0. But as soon as they click on save and try to save their project... boom... an error occurs "met with an in

  Deployed Adobe CC 2014 32 bits to our neighborhood. Students launch Adobe Flash Professional and are able to start a project using ActionScript 2.0. But as soon as they click on save and try to save their project... boom... an error occurs "met with an invalid argument' it happens to any student and any computer. Help, please!

  They can only use the old Adobe CS5 flash professional because it does not crash.

  Thank you

  Raul

  [email protected]

  CC for flash doesn't support AS2, so perhaps that is the reason.  CS6 (or earlier version) supports AS2.

• What is the serial number of photoshop adobe CC 2014 (32-bit)?

  What is the serial number of photoshop adobe CC 2014 (32-bit)?

  Hello

  CC requires no serial number because it works on your identification code Adobe please see https://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html

  ^ Ani

• Why I see 3 Versions of Photoshop (CC, 2014, 64-bit)

  I recently upgraded from CS6 CC. When I go to start > all programs in Windows 7 (64-bit), I see three entries for Photoshop:

  • Adobe Photoshop CC (64-bit)
  • Adobe Photoshop CC 2014
  • Adobe Photoshop CC

  Should I have all three? What is the difference?

  Thank you!

  Most likely, you just need Adobe Photoshop CC 2014 - this is the latest version. The new CC Installer installs just the 'good' version Photoshop... If you are running a 64 bit OS, then it installs the 64-bit PS, else the 32 bit PS the other two entries are the 'old' PS (until 2014). Best regards, Thorsten

• Adobe Photoshop CC 2014 64 bit. Cannot be selected photoshop to open the image windows system files.

  If in my pictures and select a picture, select open with... and it happens only with Illustrator CC 2014 and various default viewers even if I click brouse, go to where photshop is I can't select it.

  Any idea?

  Thank you

  On the window using Regedit to check shell Photoshop.exe windows extension key to change and open to make sure that the controls are properly set.

  

• Multiple USE Result

  Hello community,

  TestStand 2014 32-bit

  Aid scheme for the processing of the results.

  I have a main sequence and a regular sequence that is used for a single message to guest.

  The regular sequence is called main sequence, displays a message and the loop waiting for the true result pass/fail Test.

  Once the pass/fail Test finishes, then I put an end to the execution of the call of my regular sequence, which is shown in my database as UUT_STATUS terminate.

  I just connect my main sequence, which is the image with a UUT_STATUS of failure.

  It presents itself as having two unique identifiers in my table of UUT_RESULT.

  How can I keep the regular sequence to be connected in my database?

  Why are you running the guest with a process template?  Call in your advanced settings of sequence change process model Options to not to use a process template. The process model is the one that writes the results to the database.  If you change it to not to use a template so it will not touch the database.

  See the image.

  Hope this helps,

• Raspberry PI installed correctly on LabVIEW 2014 with LINX 3.0 (yellow warning)

  Hello everyone

  Well, I create this thread because I can't connect with my RPI with LabView2014, I'll put some different screenshots, as you can see I already install the LINX 3.0 on my computer.

  My computer sistem

  -10 64-bit Windows

  Products already installed

  -LabVIEW 2014 32-bit

  (this labVIEW I downloaded from the link of the PDF tutorial)

  LINX - 3.0

  -Control design and Simulation Module

  Module - MathScript RT

  NI - VISA

  VI - Pakage Manager

  -Also, I have my license activation

  I'm going to download some print screens in this same position

  Thank you

  Ruben Rhico

  Hey Patrick,

  Make sure that you have restarted LabVIEW since installing LINX.  If the problem persists, follow the instructions in sharpk in this thread.

  Let us know if that fixes the problem.

  Thank you!

  -Sam K

• How to determine the number of rows in the database and save the result to a local variable?

  Hello

  I'm a newbie in the use of TestStand, databases and SQL, and now I've met difficulties. I use TestStand 2014 (32 bit).

  I have a need to know the number of rows in a database and save that number in a local variable. I tried to practice using the database of the Types of step provided with TS. I tried to use the following in a SQL statement:

  Locals.NumberOfRows = ("SELECT COUNT (*) FROM TEST_TABLE")

  It returns an error: specified value is not the expected type. My goal is possible in this way, or I'm doing this completely wrong?

  -RautSa

  Thank you for your response, Norbert. I have a database of who wins new values at random, and sometimes I need the exact number of rows in this table.

  I managed to achieve my goal by using the SQL statement: "SELECT COUNT (*) as Rowcount OF TEST_TABLE", followed by a data GET operation, which records that number of lines in a local variable.

  -RautSa

• TestStand 2014 Version selector "Program Error"

  I upgraded to TestStand 2014 from 2013. I suspect that I deleted TestStand 2013 by using the uninstall program NOR but had not chosen 2014 TestStand using the version selector.

  When I try and run the selector version as an administrator, I get an error "unable to determine the current Version of TestStand. The Version selector then begins with the "Version Active current = n/a" and launch sequence buttons are grayed out.

  The select Version section all seem OK with 32 and 64 bit paths showing correctly and the projection of "2014 (14.0)" in the Teststand installed drop-down. When I click on 'Get active', I get a dialog box error which is entitled 'Attention' and says "program error".

  Is there a way to fix this? I installed 2014-64 bit and then reinstalled the 2014-32 bit version but still the same.

  I am on Win 8.0 and Avast antivirus and firewall (which I checked and logs do not show that it is not blocking anything related to this).

  I could just try and install the 2013-32 bit version and see if I can make some versions then and uninstall 2013 thereafter. This sounds like a good idea?

  Thank you very much: David

  I did a deactivation of 1 hour of Avast and used the repair option. This made me the Teststand service installed and everything is working again now.

  Thanks much for the tips

• SoftMotion module only runs under 32-bit labview and not 64-bit labview

  Good day everyone,

  I downloaded the softmotion module for my Labview 2013 64 bit but when I try to create a new set of solidworks there is no option for this.

  But when I installed the 32-bit version of Labview 2013 I could see the possibility of creating a new set of solidworks.

  Why can I not see the option for the Labview 2013 64 bit?

  P.S. I am using Solidworks 2014 64 bit Premium.

  Thank you

  This is the 64-bit

  

  This is the 32-bit

  

  The softmotion module is not supported for 64-bit LabVIEW.  You can see what we support in the link below.

  http://www.NI.com/white-paper/10383/en/

• DetermineReportFilePathNameExpr missing dll Testand 2014 SP1

  In my sequence of process template is only a call to DetermineReportFilePathNameExpr in content modelsupport2.dll. (Teststand 2014 64 bit) This call makes the Teststand sequence editor stop working. I guess (?) that the reason Miss dll as follows

  My system

  • Windows 7 64 bit
  
  
  • Testand 2014 SP1 (14.0.1.103) 64-bit
  
  
  • Version 14.0.1.103 sequence editor

  In the analysis of Dependency Walker modelsupport2.dll , used in the DetermineReportFilePathNameExpr call, I see the following dll lack on my system:

  • API-MS-WIN-APPMODEL-RUNTIME-L1-1-0. DLL
  
  
  • API-MS-WIN-CORE-WINRT-ERROR-L1-1-0. DLL
  
  
  • API-MS-WIN-CORE-WINRT-L1-1-0. DLL
  
  
  • API-MS-WIN-CORE-WINRT-ROBUFFER-L1-1-0. DLL
  
  
  • API-MS-WIN-CORE-WINRT-STRING-L1-1-0. DLL
  
  
  • API-MS-WIN-SHCORE-SCALING-L1-1-1. DLL
  
  
  • DCOMP. DLL
  
  
  • IESHIMS. DLL

  How can I get these DLLs?

  Best regards

  Hey Rainman.

  TestStand comes with the source code of modelsupport2.dll. It is located in the directory of TestStand components:

  32-bit: C:\Program Files (x 86) \National Instruments\TestStand 2014\Components\Models\TestStandModels\modelsupport2

  64-bit: C:\Program Files \National Instruments\TestStand 2014\Components\Models\TestStandModels\modelsupport2

  You can compile it if you have the CVI on the system. Otherwise, you can at the very least still look .c files and see what is happening in the code.

  For this particular function, it seems that we have changed it over the years. The new version of the function is DetermineReportFilePathNameExprEx2 and has more than two parameters: processModelClientPath and uutPartNum. If you create a new model of process from scratch, it's the call, so you must use your process template is more stretch if you decide you need this information.

  Try the DetermineReportFilePathNameExprEx2 and switch the values for processModelClientPath and uutPartNum. If it still causes TestStand hang, then I would recommend building a debug DLL to see the line of code where this occur.

  Edit: Also try passing an empty string or a value ' " for uutStatus. Nothing can be a problem. I do not expect to be a problem because TestStand converts this value to a point of value Null of appropriate architecture, but it should be test.

  Thank you

  -KP

• Failure TestStand 2014 operator Interface examples

  I tried to run a number of examples that illustrate the operator TestStand 2014 (32 bit) functionality of the interface, such as handling user interface Messages.  When I load and run the .NET solution interface operator beneath the example file I get the following error:

  System.Runtime.InteropServices.COMException was unhandled
  HResult =-2147221164
  Message = recovery of the class factory COM for component with CLSID {B2794EF6-C0B6-11D0-939C-0020AF68E893} failed due to the following error: 80040154 class not registered (Exception from HRESULT: 0 x 80040154 (REGDB_E_CLASSNOTREG)).
  Source = NationalInstruments.TestStand.Utility
  ErrorCode =-2147221164
  StackTrace:
  at NationalInstruments.TestStand.Utility.LaunchTestStandApplicationInNewDomain.LaunchHelper (point of entry MainEntryPointDelegate, MainEntryPointDelegateWithArgs entryPointWithArgs, String [] args)
  at NationalInstruments.TestStand.Utility.LaunchTestStandApplicationInNewDomain.Launch (point of entry MainEntryPointDelegateWithArgs, String [] args)
  at TestExec.MainForm.Main (String [] args) in c:\Users\Public\Documents\National Instruments\TestStand 2014 (32-bit) \Examples\Modifying User Interfaces\Handling UI Messages\DotNet\MainForm.cs:line 284
  InnerException:

  I tried restarting the PC and also reinstall TestStand 2014 but still not the same error.  I can, however, run the sequence editor and run sequences that without errors.

  I am that running on a Windows 7 64-bit installation and execution of the interface Visual Studio 2012 runtime solution.  Any ideas on what else to try?

  Kind regards

  David

  Hi David,

  Sorry to hear you're having trouble to get examples of the user interface to work.  A few questions to get a better idea of what is happening:

  1. If you have TestStand 32-bit installed only, ensure that the platform selected for the solution of the example is x 86, and then rebuild the solution.

  2. the example of the simple User Interface gives the same error?  ("\UserInterfaces\Full-Featured\CSharp\TestExec.sln")

  3. If you run the version selector TestStand and select this option to activate TestStand 2014 (even if it is already active), do you get any errors?  The example gives the same error after this step?

  4. If you have Visual Studio 2010 installed, please test this version as well because it's the version in that the examples have been developed.

• 2013 automatically compile in 64-bit exe?

  I will soon put in place an exe from 2013 on a variable network shared server will be fed a PC lab.  Before you start this way I want to be shure when I compile the vi (which will be on the server), it will be 64-bit.  Having trouble finding the exact answer in the literature.

  The 64-bit versions of labview require their own facility.  I tried earlier to install a 64-bit version of LV and the only version I could find is LV 2014 64 bit.  It was surprisingly difficult to find several 64-bit versions of LV on the site of NOR.

  Must be somewhere, but I think.

  EDIT: A word.