Tune onQuery tips

Similar Questions

• Qosmio G40: TV Tuner does not not in Windows 7 64 bit

  Hello

  After months of patience and according to the pilots-info on the Toshiba site, I found it was time to replace my ultimate Vista32 with Windows7 Ultimate. It seemed that all drivers now have a 64-bit Windows 7 version, missing drivers / software could be replaced by the 64-bit versions of Vista. Unfortunately, I had some problems with TOSHIBA PCI TV DVB-T/Analog hybrid Tuner.

  Search a couple of ours for a sollution to this problem of TOSHIBA PCI DVB-T/Analog TV Tuner hybrid (x 64) with Windows 7. In the hardware Manager, it shows a yellow triangle with an exclamation point, telling me that there is a problem with the device. Through the properties, I get an error with code (39).

  I downloaded the drivers from the Web from Toshiba site that returns the following files:
  tisdbt1a64.cab
  TISDBT1A64.inf
  TISDBT1A64.sys
  and a "setISDBTDriverParameters" additional-regkey.

  (1) when I try to replace the drivers by through properties in devicemanager, I get a message back that the best drivers are already installed and there is no driver better is found.

  (2) install manually
  There are no instructions to install the downloaded files, or the registry key. When I try to install the "INF" with right click, I get an installationerror selected file inf does not suppoert this installationmethod.

  (3) when I try to use 'install the old hardware', the system ends in blue screen when the driver is selected and installed. After startup, the system falls again into blue screen. So I had to remove the device by using "save mode".

  (4) I also tried to install Vista 64-bit, the same behavior as (3)

  (5) I tried both 2_1_11-ISDB-T TV and TV-Tuner-2_1_1_0 Tuner. However, IMHO the former should be used.

  Finally, I reinstalled the system full (from scratch), but same problem occurs.

  Any suggestions? I found various threads on just the tips are given. Almost no one describes a sollution to work.

  I have not found a sollution

  Hello

  Try the driver for G50
  Some users here in this thread have been able to install this.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=182538

• Qosmio F20 - 153 - update Windows XP MCE not cause to see TV tuner

  Just do the following updates;

  Windows XP Windows tool for removing malicious software - September 2009 (KB890830) September 15, 2009
  Windows XP Security Update for Windows Media Format Runtime 9, 9.5 & 11 for Windows XP SP 3 (KB968816) September 15, 2009
  Office 2003 update for the junk e-mail Filter Outlook 2003 Microsoft Office (KB973515) September 15, 2009
  Windows XP Security Update for Windows XP (KB956844) September 15, 2009
  Windows XP Security Update for Windows XP (KB973768) on September 15, 2009
  Windows XP update for Jscript 5.8 for Windows XP (KB971961) September 15, 2009

  However, even if the System Manager recognizes the presence of the TV tuner, Media Center is no longer 'sees' as being installed.

  I tried to uninstall and reinstall the drivers. Windows XP behaves as it should and no error is generated. However, Media Center still refuses to 'see' the tuner.

  If I do system restore and restore to OS to forward these updates day and then MC works very well.

  Does anyone else have this problem? In addition, no one knows which of these updates is causeing it or have a fix?

  Thanks in advance.

  Post edited by: Multi

  Hello

  I have no idea why MS updates cause this problem, but if the windows OS recognizes the TV tuner and if the TV tuner is listed in the device manager then it would mean that the TV tuner works correctly.

  I think the MCE is the problem.
  Are you using the latest MCE?

  Here you will find the official page of MS MCE:
  http://www.Microsoft.com/windowsxp/mediacenter/default.mspx

  Maybe you will find some tips.

• Satellite A355 NXP FM Tuner v. 1.9 Radio Echo after Vista SP2

  I installed the Windows Vista SP2.

  Now, when I run the utility of Tuner FM NXP v.1.9, radio starts playing after a few seconds of "stuttering". Then, the audio is "echo". In other words, I hear two liable - 2 seconds late on the first. I can't describe the matter other than an 'echo '. This made the radio almost ineffective.

  Has anyone else encountered this problem? I tried to disable MS Windows Indexing. I see no obvious problem. No other changes have been made. This occurred immediately after the installation of Windows Vista SP 2.

  Any tips?

  Windows Vista SP 2 (x 64)
  Tuner FM utility 1.9

  Thank you.

  > Has anyone else encountered this problem? I tried to disable MS Windows Indexing. I see no obvious problem. No other changes have been made. This occurred immediately after the installation of Windows Vista SP 2.

  I think you're the first person who has posted it here in the forum.
  I looked for similar topics but I found nothing.

  If you have noticed this after the Vista SP2 so I guess it has something to do with the new MS. patches Maybe there is a problem of compatibility between some patches and the pilot.
  But have you tried reinstalling the driver?
  If this is not the case to do this and check what's happening

• Is there a driver 64 for key USB DVB - T Tuner TOSHIBA PX1211E-1TVD?

  Hello
  I am usiing the key USB DVB - T Tuner TOSHIBA PX1211E-1TVD and can not find a driver for Win 7 64 bit.
  Are there Tom Driver for this OS?
  Or is it possible to use it without a specific driver? I mean something like BDA or more (I don't know-.-)

  Tanks

  Hello!

  > can not find a driver for Win 7 64 bit.
  Why you can t find a driver? What do you think could be the reason for this? Is it really so strange?

  Let me give you a little tip: Windows 7 is not yet on the market and so there is no drivers for Windows 7 available. All that s!

  You can try the Vista drivers because most of them also works on Windows 7, but it's all for the moment you can do.

  Good bye

• HP Pavilion 500-336: Tune for my HP Pavilion 500-336 not completed upgrades

  When I started my computer the tune in the lower right hand corners has an explanation of interrogation and when I click it, it has 5 recommended updates.  So I click to download and install them and it goes through the download and installation, and then at the end they are all return, and he wants I would do. I tried to restart my computer, but they are all still there.  I have windows 10 and AVG Antivirus on my computer.  Why doesn't HP assistant on install updates?

  TeddyBears4me

  Please disable the AVG and re-run the HPSA

  some internet security blocks the installation process

  or download the driver form the System page

  small Tip:

  Disable Internet Security each time the BIOS driver and network updates

• How to make TV tuner card

  no detected TV tuner card

  You have a TV tuner card installled? Are you sure that it is seated correctly.  To be sure, remove it and reset in the slot.   Have you loaded drivers, software, or firmware for the card and where you got these files?  What is the manufacturerr, the brand and model of the TV tuner card?  Which version of Vista you are using (for example, 32-bit Vista Business SP2)?  This is the manufacturer, brand, model and serial number of your computer?

  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  Check the list to see if TV Tuner device is listed - otherwise, it is not installed.  If so, click it to check if the details reveal problems.  If you need to get drivers (and you for thr TV tuner card even if you used on a disc that came with the device), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  I hope this helps. Please, help me help you by answering ALL of the questions above and by testing the updated drivers and by communicating the results in your answer. I can't offer any reccomentdations without this information.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• use OPT_ESTIMATE or CARDINALITY tip for correct estimation of nested loops

  I'm using Oracle 11.2.0.3.  Below the execution below plan, how can I use tip OPT_ESTIMATE or CARDINALITY to teach optimization E-lines for ID 9 (Nested Loop) 30553 instead of 6.

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  | Id  | Operation                                   | Name                        | Starts | E-Rows |E-Bytes| Cost (%CPU)| E-Time   | A-Rows |   A-Time   | Buffers |  OMem |  1Mem | Used-Mem |
  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT                            |                             |      1 |        |       |  4604 (100)|          |  30553 |00:00:02.56 |     208K|       |       |          |
  |   1 |  SORT ORDER BY                              |                             |      1 |      6 |  7044 |  4604   (1)| 00:01:05 |  30553 |00:00:02.56 |     208K|    41M|  2086K|   36M (0)|
  |*  2 |   HASH JOIN OUTER                           |                             |      1 |      6 |  7044 |  4603   (1)| 00:01:05 |  30553 |00:00:02.10 |     208K|    38M|  3120K|   39M (0)|
  |*  3 |    HASH JOIN OUTER                          |                             |      1 |      6 |  6870 |  4599   (1)| 00:01:05 |  30553 |00:00:01.97 |     208K|    38M|  3120K|   39M (0)|
  |*  4 |     HASH JOIN OUTER                         |                             |      1 |      6 |  6744 |  4591   (1)| 00:01:05 |  30553 |00:00:01.85 |     208K|    37M|  3121K|   39M (0)|
  |*  5 |      HASH JOIN OUTER                        |                             |      1 |      6 |  6570 |  4584   (1)| 00:01:05 |  30553 |00:00:01.74 |     208K|    37M|  3121K|   38M (0)|
  |*  6 |       HASH JOIN OUTER                       |                             |      1 |      6 |  6414 |  4576   (1)| 00:01:05 |  30553 |00:00:01.60 |     208K|    37M|  3121K|   38M (0)|
  |   7 |        NESTED LOOPS                         |                             |      1 |        |       |            |          |  30553 |00:00:01.44 |     208K|       |       |          |
  |   8 |         NESTED LOOPS                        |                             |      1 |      6 |  6318 |  4572   (1)| 00:01:05 |  30553 |00:00:01.31 |     182K|       |       |          |
  |   9 |          NESTED LOOPS                       |                             |      1 |      6 |  1830 |  4568   (1)| 00:01:04 |  30553 |00:00:01.11 |     124K|       |       |          |
  |* 10 |           HASH JOIN                         |                             |      1 |   2069 |   270K|  2499   (1)| 00:00:35 |  30646 |00:00:00.46 |   23738 |  6539K|  2033K| 7965K (0)|
  |* 11 |            TABLE ACCESS BY INDEX ROWID      | DSCLR                       |      1 |   5079 |   158K|   533   (1)| 00:00:08 |  91395 |00:00:00.28 |    6460 |       |       |          |
  |  12 |             BITMAP CONVERSION TO ROWIDS     |                             |      1 |        |       |            |          |    197K|00:00:00.16 |     615 |       |       |          |
  |  13 |              BITMAP AND                     |                             |      1 |        |       |            |          |      4 |00:00:00.14 |     615 |       |       |          |
  |  14 |               BITMAP OR                     |                             |      1 |        |       |            |          |      4 |00:00:00.07 |     276 |       |       |          |
  |  15 |                BITMAP CONVERSION FROM ROWIDS|                             |      1 |        |       |            |          |      2 |00:00:00.02 |      69 |       |       |          |
  |* 16 |                 INDEX RANGE SCAN            | XIF913DSCLR                 |      1 |    274K|       |    14   (0)| 00:00:01 |  68407 |00:00:00.01 |      69 |       |       |          |
  |  17 |                BITMAP CONVERSION FROM ROWIDS|                             |      1 |        |       |            |          |      4 |00:00:00.05 |     207 |       |       |          |
  |* 18 |                 INDEX RANGE SCAN            | XIF913DSCLR                 |      1 |    274K|       |    42   (0)| 00:00:01 |    209K|00:00:00.03 |     207 |       |       |          |
  |  19 |               BITMAP CONVERSION FROM ROWIDS |                             |      1 |        |       |            |          |      5 |00:00:00.06 |     339 |       |       |          |
  |* 20 |                INDEX RANGE SCAN             | XIF910DSCLR                 |      1 |    274K|       |    67   (0)| 00:00:01 |    239K|00:00:00.04 |     339 |       |       |          |
  |  21 |            NESTED LOOPS                     |                             |      1 |        |       |            |          |  21749 |00:00:00.10 |   17278 |       |       |          |
  |  22 |             NESTED LOOPS                    |                             |      1 |   3404 |   339K|  1965   (1)| 00:00:28 |  22772 |00:00:00.03 |    1246 |       |       |          |
  |  23 |              TABLE ACCESS FULL              | TMP_RPT_BD_STATE_DATA_DWNLD |      1 |   3255 |   257K|    11   (0)| 00:00:01 |   3255 |00:00:00.01 |      27 |       |       |          |
  |* 24 |              INDEX RANGE SCAN               | XIE2OCRN                    |   3255 |      7 |       |     1   (0)| 00:00:01 |  22772 |00:00:00.03 |    1219 |       |       |          |
  |* 25 |             TABLE ACCESS BY INDEX ROWID     | OCRN                        |  22772 |      1 |    21 |     1   (0)| 00:00:01 |  21749 |00:00:00.06 |   16032 |       |       |          |
  |* 26 |           VIEW PUSHED PREDICATE             |                             |  30646 |      1 |   171 |     1   (0)| 00:00:01 |  30553 |00:00:00.63 |     101K|       |       |          |
  |  27 |            WINDOW BUFFER                    |                             |  30646 |      1 |    21 |     1   (0)| 00:00:01 |  46946 |00:00:00.59 |     101K|  2048 |  2048 | 2048  (0)|
  |* 28 |             TABLE ACCESS BY INDEX ROWID     | DSCLR_FLNG                  |  30646 |      1 |    21 |     1   (0)| 00:00:01 |  46946 |00:00:00.32 |     101K|       |       |          |
  |* 29 |              INDEX RANGE SCAN               | XIE1DSCLR_FLNG              |  30646 |      2 |       |     1   (0)| 00:00:01 |  46946 |00:00:00.21 |   59862 |       |       |          |
  |* 30 |          INDEX RANGE SCAN                   | XPKH760_RGLTY_ACTN_DSCLR    |  30553 |      1 |       |     1   (0)| 00:00:01 |  30553 |00:00:00.18 |   57541 |       |       |          |
  |  31 |         TABLE ACCESS BY INDEX ROWID         | H760_RGLTY_ACTN_DSCLR       |  30553 |      1 |   748 |     1   (0)| 00:00:01 |  30553 |00:00:00.11 |   26218 |       |       |          |
  |  32 |        TABLE ACCESS FULL                    | DSCLR_ST_TYPE_TBL           |      1 |      4 |    64 |     4   (0)| 00:00:01 |      4 |00:00:00.01 |       5 |       |       |          |
  |  33 |       TABLE ACCESS FULL                     | RGLTY_RSLTN_TYPE_TBL        |      1 |     12 |   312 |     7   (0)| 00:00:01 |     12 |00:00:00.01 |      10 |       |       |          |
  |  34 |      TABLE ACCESS FULL                      | INTTR_TYPE_TBL              |      1 |     14 |   406 |     7   (0)| 00:00:01 |     14 |00:00:00.01 |      10 |       |       |          |
  |  35 |     TABLE ACCESS FULL                       | SNCTN_TYPE_TBL              |      1 |     15 |   315 |     7   (0)| 00:00:01 |     15 |00:00:00.01 |      10 |       |       |          |
  |  36 |    TABLE ACCESS FULL                        | PRDCT_TYPE_TBL              |      1 |     25 |   725 |     4   (0)| 00:00:01 |     25 |00:00:00.01 |       5 |       |       |          |
  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  Query Block Name / Object Alias (identified by operation id):
  -------------------------------------------------------------
  
     1 - SEL$A8B7A3F4
    11 - SEL$A8B7A3F4 / D@SEL$13
    23 - SEL$A8B7A3F4 / OH@SEL$1
    24 - SEL$A8B7A3F4 / O@SEL$13
    25 - SEL$A8B7A3F4 / O@SEL$13
    26 - SEL$13512960 / DF@SEL$13
    27 - SEL$13512960
    28 - SEL$13512960 / DF1@SEL$14
    29 - SEL$13512960 / DF1@SEL$14
    30 - SEL$A8B7A3F4 / H7@SEL$2
    31 - SEL$A8B7A3F4 / H7@SEL$2
    32 - SEL$A8B7A3F4 / DS@SEL$9
    33 - SEL$A8B7A3F4 / RST@SEL$11
    34 - SEL$A8B7A3F4 / ITT@SEL$3
    35 - SEL$A8B7A3F4 / ST@SEL$5
    36 - SEL$A8B7A3F4 / PT@SEL$7
  
  Outline Data
  -------------
  
    /*+
        BEGIN_OUTLINE_DATA
        IGNORE_OPTIM_EMBEDDED_HINTS
        OPTIMIZER_FEATURES_ENABLE('11.2.0.3')
        DB_VERSION('11.2.0.3')
        OPT_PARAM('optimizer_index_cost_adj' 20)
        ALL_ROWS
        OUTLINE_LEAF(@"SEL$13512960")
        PUSH_PRED(@"SEL$A8B7A3F4" "DF"@"SEL$13" 11)
        OUTLINE_LEAF(@"SEL$A8B7A3F4")
        ELIMINATE_JOIN(@"SEL$2D47CDEA" "DTT"@"SEL$13")
        OUTLINE(@"SEL$14")
        OUTLINE(@"SEL$A8B7A3F4")
        ELIMINATE_JOIN(@"SEL$2D47CDEA" "DTT"@"SEL$13")
        OUTLINE(@"SEL$2D47CDEA")
        MERGE(@"SEL$3FAACB6D")
        OUTLINE(@"SEL$15")
        OUTLINE(@"SEL$3FAACB6D")
        MERGE(@"SEL$11")
        MERGE(@"SEL$A1A6E401")
        OUTLINE(@"SEL$12")
        OUTLINE(@"SEL$11")
        OUTLINE(@"SEL$A1A6E401")
        MERGE(@"SEL$9")
        MERGE(@"SEL$BFB1842A")
        OUTLINE(@"SEL$10")
        OUTLINE(@"SEL$9")
        OUTLINE(@"SEL$BFB1842A")
        MERGE(@"SEL$7")
        MERGE(@"SEL$EEDE2B8C")
        OUTLINE(@"SEL$8")
        OUTLINE(@"SEL$7")
        OUTLINE(@"SEL$EEDE2B8C")
        MERGE(@"SEL$5")
        MERGE(@"SEL$A6B38458")
        OUTLINE(@"SEL$6")
        OUTLINE(@"SEL$5")
        OUTLINE(@"SEL$A6B38458")
        MERGE(@"SEL$171BE69E")
        MERGE(@"SEL$3")
        OUTLINE(@"SEL$4")
        OUTLINE(@"SEL$171BE69E")
        MERGE(@"SEL$AF02BF1E")
        OUTLINE(@"SEL$3")
        OUTLINE(@"SEL$2")
        OUTLINE(@"SEL$AF02BF1E")
        MERGE(@"SEL$13")
        OUTLINE(@"SEL$1")
        OUTLINE(@"SEL$13")
        FULL(@"SEL$A8B7A3F4" "OH"@"SEL$1")
        INDEX(@"SEL$A8B7A3F4" "O"@"SEL$13" ("OCRN"."ORG_PK" "OCRN"."DSCLR_DSCLB_FL" "OCRN"."DSCLR_RPTBL_FL"))
        BITMAP_TREE(@"SEL$A8B7A3F4" "D"@"SEL$13" AND(OR(1 1 ("DSCLR"."FORM_TYPE_CD") 2 ("DSCLR"."FORM_TYPE_CD")) ("DSCLR"."DSCLR_TYPE_CD")))
        NO_ACCESS(@"SEL$A8B7A3F4" "DF"@"SEL$13")
        INDEX(@"SEL$A8B7A3F4" "H7"@"SEL$2" ("H760_RGLTY_ACTN_DSCLR"."FLNG_PK" "H760_RGLTY_ACTN_DSCLR"."DSCLR_PK" "H760_RGLTY_ACTN_DSCLR"."REC_SEQ_NB"))
        FULL(@"SEL$A8B7A3F4" "DS"@"SEL$9")
        FULL(@"SEL$A8B7A3F4" "RST"@"SEL$11")
        FULL(@"SEL$A8B7A3F4" "ITT"@"SEL$3")
        FULL(@"SEL$A8B7A3F4" "ST"@"SEL$5")
        FULL(@"SEL$A8B7A3F4" "PT"@"SEL$7")
        LEADING(@"SEL$A8B7A3F4" "OH"@"SEL$1" "O"@"SEL$13" "D"@"SEL$13" "DF"@"SEL$13" "H7"@"SEL$2" "DS"@"SEL$9" "RST"@"SEL$11" "ITT"@"SEL$3" "ST"@"SEL$5" "PT"@"SEL$7")
        USE_NL(@"SEL$A8B7A3F4" "O"@"SEL$13")
        NLJ_BATCHING(@"SEL$A8B7A3F4" "O"@"SEL$13")
        USE_HASH(@"SEL$A8B7A3F4" "D"@"SEL$13")
        USE_NL(@"SEL$A8B7A3F4" "DF"@"SEL$13")
        USE_NL(@"SEL$A8B7A3F4" "H7"@"SEL$2")
        NLJ_BATCHING(@"SEL$A8B7A3F4" "H7"@"SEL$2")
        USE_HASH(@"SEL$A8B7A3F4" "DS"@"SEL$9")
        USE_HASH(@"SEL$A8B7A3F4" "RST"@"SEL$11")
        USE_HASH(@"SEL$A8B7A3F4" "ITT"@"SEL$3")
        USE_HASH(@"SEL$A8B7A3F4" "ST"@"SEL$5")
        USE_HASH(@"SEL$A8B7A3F4" "PT"@"SEL$7")
        SWAP_JOIN_INPUTS(@"SEL$A8B7A3F4" "D"@"SEL$13")
        INDEX_RS_ASC(@"SEL$13512960" "DF1"@"SEL$14" ("DSCLR_FLNG"."DSCLR_PK" "DSCLR_FLNG"."BLLBL_FL"))
        END_OUTLINE_DATA
    */
  

  This plan gives you an idea of why your initial synchronization has been long - most of your readings are one-piece readings and you have read 53 724 blocks. If you estimate 1 centisecond by read (which could be on a reasonable charge system) then it is 537 seconds. to 5 milliseconds per read, it's still 268 seconds or 4 minutes and 30 seconds.

  A quick break down of some (the worst case) potential time - only you can say whether or not some of these readings will be always/often/never being cached in the file or at the SAN level.

  Line 11 - physical reads 6 400 done - it's a tree bitmap then the readings are in the order of physical table with no. rereads. Call 5ms by read-online 32 seconds. L

  | * 11 |            TABLE ACCESS BY INDEX ROWID | DSCLR                       |      1.   5079.   158K |   533 (1) | 00:00:08 |  91395 | 00:00:01.27 |    6460.   6400 |       |       |          |

  The hash join takes us from 6 400 to 11 788 because it joins, lines 21 to 25 (nested loop) in which most of the work is the random access table with some automatic caching: 26 seconds. Do a search here rather than indexed 22 000 access? Which would be faster, which would charge less.

  | * 25.             TABLE ACCESS BY INDEX ROWID | OCRN                        |  22050.      1.    21.     1 (0) | 00:00:01 |  21059 | 00:01:04.74 |   15634 |   5280.       |       |          |

  Three nested loops that introduce more readings:

  11788 9-> 26386:14 600 of the predicate view pushed which some lies but a very large index and a table of random access 73 seconds

  8 26386-> 33783:7 400 index line 30 - big clue about 37 seconds Access hides

  33783 7-> 53691:19 900 31 table access - large table line, not much caching, 100 seconds.

  In each case, you can ask if an analysis would take less time than all of these random reads.

  NOTE - all I'm pointing our here where you potentially use a lot of time so that you can ask whether or not you should do little of the query in this way, or if there is an alternative, or if the work you're doing is absolutely necessary. If you want to optimize the query you should consider the intent of the query and think your way through a reasonable join order to see if you can imagine an effective way to get the same data. I have written a few articles and presentation on an approach that begins by drawing - here is a link to an article I wrote for a group of SQL Server: https://www.simple-talk.com/sql/performance/designing-efficient-sql-a-visual-approach/

  and a video I did with Kyle Hailey, while he was working for Embarcadero:Tune in for the ultimate SQL Tune-off | Landing pages

  Concerning

  Jonathan Lewis

• Where is the guide PC tune-up for Windows 7?

  Forum Hardware Just curious. Everything in the drop down the first page of this section of the FAQ forum are dated older than 5 or 6. I know that some of the info is still valid, but all this will be updated?  And is there a reference site that I can rely on new construction? PPBM site seems to have stopped operating.

  In any case, I was looking for this guide developed for the PC running first. I can't find anywhere.

  I don't know if what I have is 'this development guide' for Win7 but I have a lot of saved links

  Indexing of Windows is BAD http://forums.adobe.com/thread/676303

  While in the properties, make sure you have indexing left in car

  -for the reader and for all directories, to improve performance

  http://www.decrap.org/ remove bloatware

  http://support.Microsoft.com/FixIt/

  Record of the http://blog.raxco.com/2012/05/18/windows-7-tool-records-your-pc-problems/ measures

  Free System Optimizer http://www.iobit.com/advancedsystemcareper.html

  Http://windowssecrets.com/newsletter/putting-registry-system-cleanup-apps-to-the-test/ registry cleaners

  Make sure that you have the hard drive by default OFF indexing for all the drives and folders!

  http://www.PCWorld.com/businesscenter/article/220753/windows_7_godmode_tips_tricks_tweaks. HTML

  Temp/Cookie Cleaner http://www.mixesoft.com/

  http://forums.Adobe.com/thread/789809

  Win7 Toolbar http://WindowsSecrets.com/comp/110210

  More tips Win7 http://windowssecrets.com/comp/110127

  Services public http://windowssecrets.com/comp/110106 (start-up Solutions)

  Win7 help http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/

  Configuration http://windowssecrets.com:80/comp/100218 Win7 article

  Win7 http://windowssecrets.com:80/comp/100304 monitor

  Win7 optimization http://www.blackviper.com/Windows_7/servicecfg.htm

  Win7 Adobe Notes http://kb2.adobe.com/cps/508/cpsid_50853.html#tech

  Server Update Win7 Adobe http://forums.adobe.com/thread/586346 problem

  A FAQ Win7 Adobe http://forums.adobe.com/thread/511916

  More Win7 Tips/FAQ http://forums.adobe.com/thread/513640

  Process http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx

  Compatibility http://www.microsoft.com/windows/compatibility/windows-7/en-us/Default.aspx

  Win7 God Mode http://forums.adobe.com/thread/595255

  Error installing CS5 http://forums.adobe.com/thread/629281

  CS5 help issue http://kb2.adobe.com/cps/842/cpsid_84215.html

  Win7 and Firewire http://forums.adobe.com/thread/521842

  http://Lifehacker.com/5634978/top-10-things-to-do-with-a-new-Windows-7-system

  http://www.DownloadSquad.com/2009/05/29/7-free-Windows-7-tweaking-utilities/

  Win7 64 bit crushing and 'a' in trouble http://forums.adobe.com/thread/580435

  http://prodesigntools.com/if-any-problems-downloading-or-installing-CS5.html

  Http://forums.adobe.com/thread/504907 injury tools

  Also http://www.tune-up.com/products/tuneup-utilities/

  Also http://personal.inet.fi/business/toniarts/ecleane.htm

  Disk optimization hard http://www.video2brain.com/en/videos-5353.htm

  - and http://forums.adobe.com/thread/1083797

  Reinstall Win7 http://windowssecrets.com/newsletter/win7s-no-reformat-nondestructive-reinstall/

  Tools Anti-Malware http://windowssecrets.com/newsletter/the-advanced-system-recover-toolkit/

  Repair AVI http://forums.adobe.com/thread/888268

  Tune Vista & Win7 64 bit http://forums.adobe.com/thread/436139

  GPU http://www.techpowerup.com/downloads/2092/TechPowerUp_GPU-Z_v0.5.8.html monitor

  http://WindowsSecrets.com/newsletter/clean-install-Windows-7-from-the-upgrade-disc/

  C drive space http://forums.adobe.com/thread/1007934?tstart=0

• My i pod classic has no summer when option in I tunes 12.5

  My I pod classic has no summer when option in i tunes 12.5.  I want to manage my iPod

  Launch iTunes and connect the iPod.  The iPod is displayed as a button on the device, close to upper left corner of the iTunes window.  This screenshot of my iTunes appears iPod device button, circled in red

  

  Click this button to display the settings of the iPod summary screen in the iTunes window.  Along the left side of this screen, in the sidebar, in setting, click the iTunes (like the music) media type to set up automatic synchronization for this type of media to iTunes.

  So if you are more familiar with the "tabs" to set up the iPod, who went in the upper part of the window of iTunes Plus, it works the same way, except that the features are now in the sidebar on the left side.

• Sign in I tunes required Visa card

  Sign in I tunes required Visa card

  You have a question? If you do, you will need to provide details of what exactly you're trying to do, and what happens when you do that.

  If you mean that you are either prompted to enter in the details of payment before you can download anything, then you made? You get an error message by? If you try to create a new account and don't have payment details you must use these statements when you create an account: create or use your Apple ID without a mode of payment - Apple Support

• Recommendations/tips for a beginner contributor?

  Hey all!

  I started to contribute to communities of support today, but the interface may seem a little tricky to work with sometimes. I was hoping that some useful people would be willing to share tips/advice for someone new in the region!

  Currently, I am just by clicking on the 'Content' link and refreshing for the new questions to answer, although sometimes sorted by "involved" to follow up on the questions answered. Really hoping to find some easier ways to use to check on different communities or focus on specializations.

  Thanks in advance!

  Take a look at this plan of the Site communities and categories.

  TT2

• Classic i - pod, i-tunes not recognized not

  plugged the iPod on a Mac Classic.  Naturally, it erases all the music on the iPod. However, none of the music on the Mac was recorded on the ipod.  The monitor of playback for music stated, 'no music'.  Then, to make matters worse, when I plugged the ipod into my PC, it has not copied anything from the computer.  I went to devices on the drop of i-tunes, but the iPod does not appear as a device.  At one point, I got a warning to the effect that the iPod was corrupt.  I tried to reset by pressing the menu and select button, got the picture of the Apple, but still i-tunes does not recognize the device.  I tried this on another PC, that I have before at the end.  Same result. Both computers have the latest version of i-tunes.  On the page 'about' on the i - pod, I see that the version is 2.04PC, so I guess that the original software was for a PC and plug it into a Mac that messed up.  Can I load onto the ipod via the internet on PC?

  Naturally, it erases all the music on the iPod.

  Don't know what that means "naturally"...  If iPod was already associated with your Windows computer's iTunes library and you connected to your Mac, it shouldn't erase the iPod unless specifically can you tell iTunes Sync music library iTunes to Mac or do a restore (to erase the iPod).  Since that it has been deleted (probably with a restoration), after the restoration, the iPod uses the manually manage music and videos by default.  It still "synchronizes" but nothing is loaded onto the iPod.

  If you are planning that iTunes to automatically sync your music library on iPod, you assign to Sync music.  Find the iPod touch device in iTunes.  Here is a screenshot of the upper left corner of my window in iTunes, iPod button circled in red

  

  Click this button to display the settings of the iPod summary screen in the iTunes window.  Along the left side, in the sidebar, under settings, click on music.  To the right, the music from the iPod settings screen.  Check the box to Sync music.

  NOTE: All of the songs on the iPod that are are not in your iTunes library (on computer) will be lost.

  This enables automatic synchronization.  You can choose to synchronize the entire music library (if it fits) or a part of the selection .  Set up this screen as desired, then click apply to sync.  Further, iTunes automatically keeps iPod "in phase" with the changes to your music library (or the selected part of it) when you connect the iPod (or click sync , if already connected).

  NOTE: If your iPod is currently "corrupt", you will need to do a restore of the iPod in iTunes, before you can set it up to Sync music.  The restore button is on the settings of the iPod summary screen in iTunes.  Use any computer you plan to use with the iPod, to proceed to the restore.

  Can I load onto the ipod via the internet on PC?

  Embedded iPod software is the same, the only difference is how, the iPod's hard drive is formatted for Mac or Windows.  And do a restore on the iPod in iTunes, it's how the iPod software is reinstalled.

• I recently downloaded my favorite CD music in my I tunes library, how can you transfer this music on a USB Flash drive so that I can play the music through my stereo system H D - Bike. I'm 10 Windows on my PC

  I recently downloaded my favorite CD music in my I tunes library, how can you transfer this music on a USB Flash drive so that I can play the music through my H D - bike

  stereo system.

  I'm 10 Windows on my PC

  Select the songs in iTunes, let them slip into a file Explorer window showing the flash drive, drop.

  TT2

• Tune Up my Mac software safe to use on desktop Mac computers?

  Hello team Apple,

  I found this http://www.tuneupmymac.com/Features#.V-cFmDKZOV5 software and was wondering is it worth to download this software to tune up and remove unnecessary records on the Mac desktop. For now, it works well, but I often wonder if it runs more slowly so that was when I bought my Mac end 2011. I was told to stay away from MacKeeper.  I have approximately 427 GB of free HD space and 16 GB of RAM. The RAM is usually between 7 and 8 GB and some programs and open. I closed usually programs or apps if not using them. My OS X is currently El Capitan. I think I'll be able to download macOS Sierra in autumn.

  There an honest answer as to the ability of software to clean, optimise and delete records with users of Apple Mac? Comments, suggestions or advice will be highly appreciated. Thank you.

  Macs have built in procedures that automatically run and do what is necessary. More 3rd party 'tune up' and 'cleaning' software cause more problems than benefits. You won't find many people here their recommendation.

  Sierra of BONES was released on 20 September and can be downloaded from the App Store.