Tungsten T3 with WiFi PalmOne & Email card

Similar Questions

• Satellite M100: Slow down data transfer WiFi with WiFi Intel 3945ABG card

  Just jumped a nine M100 XP upgraded to SP2 on our network and have problems with Wifi.

  Everything works, just really slowly. Takes about 5 minutes to drag an MP3 off file server, download web pages at the speed of a dial-up modem and my beard length doubles wait even a modest flash file to load.

  Have tried so far the following...

  -Speed is good on the ethernet cable, but not on wifi.
  -The connection is good on the wifi (11 Mbit/s) and the signal strength is excellent.
  -All other laptops on the network are quick work
  -J' updated the drivers for the last provided by intel, no change
  -J' applied all the service packs and updates to XP (was a brand new box yesterday)
  -Deactivation of different modes on the driver to make no difference
  -Disabling the QoS mode in the double network data NET Panel

  I see messages earlier that I'm not the only one who had this problem with Intel 3945ABG chip, but I do not see a solution of publication. Anyone who has been successful is to solve this kind of problem.

  The data rate is barely usable to access internet and quite ineffective for LAN filesharing or Skype.

  Hello

  > Connection speed is good on wifi (11 Mbit/s) and the signal strength is excellent.

  Well, seems that your wireless network card works on 802.11 standard B
  In the WLan card properties, you can try to set different options! I remember that you can find the options in the Advanced tab

  By the way: have you tried to disable the scanning engine antivirus software during moving file

• The Ralink RT5390 in a Pavilion dm1z wireless card works with WiFi on 5 GHz?

  I have a Pavailion dm1z, which uses the Ralink RT5390 wireless card. I have a router dual band with WiFi networks on 2.4 GHZ and 5 GHz. The dm1z is unable to pick up the SSID in the 5 GHz range, it can for the 2.4 GHz band. Is the Ralink RT5390 card dual wireless broadband? Can it captures my 5 GHz wireless network? If this isn't the case, allow new drivers for it? Or the dm1z can be updated to capture the WiFi in the 5 GHz range? What other options I have to do the 5 GHz WiFi?

  (5 or 2.4 GHz) USB adapter should work well on the laptop.

• Address a problem with your LOCAL WIFI card__Your network card has stopped working properly .___To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer. __ __

  A problem with your wireless network card Your wireless card has stopped working properly. To see if an updated version of your WLAN card is available

  Hello Jeroen Ratz,

  You should visit your computer manufacturer's website to download all updates for your hardware. Never leave the windows update utility, update your hardware to your computer. Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• can I use a mini ipad 4 (which has more cellular wifi) without sim card installed

  can I use a mini ipad 4 (which has more cellular wifi) without sim card?   I managed to update to 9.3.3 but the wifi keep disconnecting and lock the screen when I go to settings, Wifi.

  Yes, you can remove the sim card. The iPad will be only nag you about the missing card every now and then. But the sim card has nothing to do with wifi...

• Someone SP4600 750 celaron with WiFi?

  does anyone have a celeron 750 sp4600 with integrated wireless lan card, ive just installed xp pro win 2000 there and im almost positive after, he had the wireless network adapter in the settings before, but now I can't install it on xp pro

  These books did have this installed?

  Help!

  Hello

  Usually, drivers for Win XP Wifi differ on W2k.
  Have you installed the correct driver WiFi?

  Good bye

• PC Diagnostic tool indicates problem with WiFi - Satellite Pro A100

  Hey all

  Im having some problems trying to connect with my laptop wifi computers.

  Ran tool Diagnostic PC (toshiba) and the result said network fails but gave me no help to identify or reapiring problem.

  If anyone can help?

  Satelittle Pro A100
  Win XP
  512 MB of ram
  HARD DRIVE 60 GB
  ATI Radeon X 1400

  Malc

  Hello

  I put t know what problem you have, but check the status of the WIFI card in Device Manager. After this check, if the card is correctly enabled or disabled. If the map is successfully activated the laptop should be able to see WLAN network. If this isn't the case, I assume that there is a problem with the wireless network card.

  If you want to report us more on your problem.

  Good bye

• Problem with WiFi adapter (RTL8187b) on the Satellite L350-146

  Hello.

  Problem with WiFi (RTL8187b) on the Toshiba Satellite L350-146 adapter:

  Exchange of packets of 192.168.0.177 with 32 bytes of data:

  Reply from 192.168.0.177: bytes = 32 time = 3ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 4 ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 6ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 874ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 364ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 3ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128

  Ping statistics for 192.168.0.177:
  Packets: sent = 50, received = 50, lost = 0 (0% loss)
  Estimated duration of admission, transfer to ms:
  1msek = Minimum, Maximum = 874 ms, average = 34 ms

  Win Vista HP, drivers last.
  This problem with different access points.

  Sorry for bad English may

  Need to check if theres no interferense in your plase, check also if the WiFi adapter is ok!... you can do this reinstalling the driver and check if it works if not you have to go with an ASP in your area to check the Wi Fi card...

• RALink RT5390r 801,1 1 b/g/n 1 x 1 wifi adapter in a Pavilion dv6 notebook works with WiFi on 5 GHz?

  The card Ralink RT5390r 801,1 1 b/g/n 1 x 1 wifi in a Pavilion dv6 notebook wireless adapter works with WiFi on 5 GHz? I need to change the network card?

  Hello:

  Any card with a bgn suffix is a single 2.4 GHz single band card.

  A card with agn or abgn is a dual band.

  I doubt you will find a dual band compatible to your laptop wireless card.

  The BIOS has a whitelist which hangs in the cards wireless not supported to be installed.

  The service manual may indicate a card dual band for your model, but the part number will be probably wrong.

• I have an ACER Aspire One model ZG5/A150 can I put the card WIFI B/G card WIFI B/G/N

  I have an ACER / Aspire One model / ZG5 / A150 may update the WIFI B/G card for a WIFI B/G/N card?

  My system (Windows XP) will make use of the new speed of the upgrade card?

  If you are familiar with the process, yes you could upgrade the wireless card and Windows XP would be able to use the speed of upgrade, subject the new wifi card you select has Windows XP drivers available.

• Access to blackBerry 10 using WIFI: 64 GB card

  On my Z10: software version - 10.2.1.2977 10.2.1.3247 OS Version now impossible to access a 64 GB SD card via wifi, but a 32GB works fine.

  The card format fat32 above up to what this last updated... now it formats such as exFat.  I don't know if this change is linked, but this is when the problem started to occur.

  I use smbclient v.3.6.15 to connect.

  $ smbclient - U BlackBerry //192.168.0.5/media

  Enter the password for BlackBerry:

  Domain = [workgroup] OS = [Unix] = [Samba 3.0.37] Server

  SMB:------> ls

  . D 0 Sat Aug 2 09:28:58 2014

  .. D 0 Mar Feb 11 17:40:41 2014

  Books D 0 2 Mar 07:30 Apr 2013

  camera D 0 Wednesday 7 May 16:16:46 2014

  documents D 0 Wed Jul 16 22:22:10 2014

  downloads D 0 Sun Aug 10 14:05:21 2014

  Misc D 0 Wed Aug 6 08:39:12 2014

  music D 0 Mar 2 08:01:41 Apr 2013

  photos D 0 Sun Aug 10 17:56:03 2014

  impression D 0 lun 26 mai 13:08: 49 2014

  videos D 0 Mar 2 08:02:43 Apr 2013

  voice D 0 2 Mar 07:30 Apr 2013

  .metadata_never_index H 0 2 Mar 07:30 Apr 2013

  54007 block size 262144. 39002 blocks available

  SMB:------> quit

  $ smbclient - U BlackBerry //192.168.0.5/removable_sdcard

  Enter the password for BlackBerry:

  Domain = [workgroup] OS = [Unix] = [Samba 3.0.37] Server

  SMB:------> ls

  List of NT_STATUS_INVALID_HANDLE. \

  SMB:------> quit

  $

  Does anyone else have this problem?

  If I put a 32 GB card in and the format, I can access the media and the removable_sdcard without problem.  Put 64 GB in and format it, still doesn't work.

  If I have to I'll just go to the smallest card, this is the only method that I am able to transfer files with the encrypted card. (I guess I could transfer to the media, then move the phone to sd however)

  Thank you.

  BrianZ10 wrote:

  rat - 7 says:

  If you want Windows to be able to access the card using USB (mass storage not) or WIFI, card formatted in FAT32 and exfat should not.

  For some reason, Windows does not accept a network drive which is formatted exfat

  OK, well as long as the samba host can access the file system to be shared, it should work.  I use openbsd this is why I am stuck with WiFi for an encrypted sdcard.

  In general, I always format a card in the camera it uses, but I tried to format the card of 64 GB as fat32L on my computer and put back them in the phone manually.  It works fine for me now, I'll leave this way.

  Thank you<-->

  I used to do the same thing, just format it in the camera, but since the 10.2.1.3247 updated, it does not have to use either WIFI or USB access (not mass storage).

  I'm just glad you can now go and enjoy the divce as you used to

• HP Pavilion g6-1b53ca with wifi Ralink RT5390 will not run on 802.11n

  Hello.  Does anyone have any advice for the following?

  I have a laptop Pavilion g6 with a b/g/n wifi Ralink RT5390 card.  It works very well with my Linksys WRT54G and GS DD - WRT routers.  I recently got a new Linksys EA2700 with v1.0 of the Linksys firmware.

  The laptop again works very well with the Linksys EA2700 as long as it's WPA2 with mixed mode at 2.4 Ghz.  It shows connected to 54Mbps... which is g mode.

  Any ideas on why he used to connect fashion n greater speed?  It is only 5 meters and shows an excellent signal strength.  When I change the EA2700 from mixed mode to mode N... The HP error message just says... impossible to connect... the diagsnostics can't find anything.  I have a Samsung wifi phone and there is no connection problems in n to the same router EA2700 mode.

  The laptop shows the RALINK RT5390 as with the 3.2.13.0 version in Add/Remove Programs section.  The shows 5.0.9.0 device driver date device driver dated 27/11/2012

  Thanks a lot if anyone can make comments.

  Edward

  Hi, Edward:

  Please see if updating the driver to the latest version of help.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127448-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

  Then go to the Advanced tab for the device in Device Manager and check if there is a bgn mode to select.

  It is possible that the pilot, that you have only has an auto or b/g mode.

  You can also check first before updating the driver.

  You should get 65 to 72 Mbps on the 2.4 GHz band.

  The card can receive and transmit on the 5.0 GHz band.

• Update internal laptop DV6500 Wifi N Wireless card?

  Hi all

  I was looking to see if it was possible to upgrade my laptop wifi internal card a G wireless with a Wireless N card.  I would avoid making the USB card or expresscard because the expresscard is too expensive and you can't really find them much more, and just USB sticks out too far and use USB ports.  It seems that it is not difficult to do the physical replacement, I found the card looks like, it can be all just unscrewed and replaced.  However, after looking at some threads here and other observations and comments online, it seems you need to find just the right part to do, even if I did not really reach a concrete conclusion as to which is the right side and where.  It seems that HP is quite picky about what cards you can put in those laptops.

  So my question is, if I want to do an upgrade of a Wi - Fi N, is there a compatible card to use my laptop?  Here are my specs:

  Laptop DV6500z

  AMD Athlon X 2 64 1.8 gHz processor

  4 GB of ram

  Windows 7 32 bit

  Wi - fi + bluetooth (which is another question, is bluetooth built-in wifi module or is separated in this laptop?)

  I looked at the maintenance and Service of Guide (http://h10032.www1.hp.com/ctg/Manual/c01295877.pdf), and he mentions on the bottom of page 4 top of page 5, the types of wifi modules.  It shows a few Intel ones and some Broadcom ones.  In my hardware device manager it appears as a Broadcom 802.11 g network adapter.  On the module itself, it does not seem to show a lot of additional information...  It simply shows the part number 441090-001.  After watching this pn in HP partsurfer, I get the following description:

  Wireless 802. 11 b / g mini PCI card (Broadcom, Hoya) adapter - 54 Mbps data rate

  So which PN I get at this level to WiFi N?  Thank you!

  -capT

  Actually, scratch that... I guess I won't do anything else with this 'thing'. Finally, he gave the soul the other day, and nothing I've done has been able to revive. Owell. RIP I guess. Whatever...

• Tungsten E2 with Notes 7.0

  I just upgraded to 7.0 Notes and software Intellisync synchronizes is no longer with my Palmone Tungsten E2. Anyone know of a solution that allows the synchronization? I'd be happy with calendar and contacts.

  Have you checked to see in Intellisync offers an update for the software version you have. They may have released a newer version.

  Message relates to: None

• Anyone having problems with WiFi connectivity after upgrade to Sierra?

  I was wondering if anyone else knows issues with WiFi connectivity since the upgrade to Sierra 10.12? I have not had any problems with connectivity WiFi previously on El Capitan. Now I have regular randomly loose connectivity. My internet is cable and when it is connected I have a 100% connection. My details of iMac and I have used only 10% of my storage.

  

  No problem with my iphone 6.

  Hello AspDesigns,

  I understand that, since the upgrade to Mac OS Sierra, your Mac seems to have trouble staying connected to Wi - Fi. Fortunately the diagnosis built-in wireless can help identify the source of so much trouble.

  Search for Wi - Fi using your Mac problems

  See you soon!