Turn off the screen on Tecra and using external monitor/LCD TV

I recently bought an LCD TV and was anxious to use it as a monitor for my Toshiba Tecra M2V. I ran into problems.

I seem to be unable to 'disable' the laptop screen and ONLY use the LCD TV screen at cary, work, games etc. I seem to be rather only beable to COMBINE the LCD with my LCD screen, by creating a "two" screen I followed all the online help and I am still unable to have one screen.

I just want some LCD TV as my screen!

Any ideas on how to do this? It's really a pain!

TIA

Hello

Usually, you should be able to do this by using the FN + F5 key combination. As far as I know if the device is connected to the TV, you have three options (maybe depends on the laptop model) LCD only, LCD and external, just the TV device.

You can also try to switch using GeForce properties:
Display properties > settings > advanced > GeForce tab > Device Settings > Select output device.

Tags: Toshiba

Similar Questions

  • Disable the ability for applications prevent turn off the screen and start screen saver

    Hello

    I need to disable the ability of application full screen to turn off the screen and start screen saver. Basically just need to it:

    When there is no entry in the application that is running in full-screen, I want to turn on the screen saver and turn off the display. As far as I know, the windows default settings is to prevent turning on the screen saver during modes full screen.

    Thanks for the reply

    Hello

    Thanks for posting your query in Microsoft Community.

    According to the description, I understand that you have related questions screen saver settings in Windows.

    A screen saver is a program that, including the screen or filling it with moving images or patterns when the computer is not in use.

    Screensaver programs were designed to help avoid these effects by automatically changing the images on the screen during periods of user inactivity.

    Windows uses photos that better match your monitor for locking screen slide show.

    For more information: See photos on the desktop, start and the lock screen

    I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

  • iPad - I forgot to turn off my screen before cleaning, and now the police is so great that I can't narrow it down to access the screen.

    iPad - I forgot to turn off my screen before cleaning, and now the police is so great that I can't narrow it down to access the screen.

    James,

    Double-tap the screen with three fingers and then go to settings > general > accessibility >... put the Zoom wide.

  • How auto turn off the screen of the laptop when you use the external monitor?

    I don't wan turn on laptop screen and my external monitor at the same time. So is it possible to do automatic screen of my laptop to turn off as soon as I plug my external monitor to my laptop vga cable (without pressing Fn + F2 keys)?

    Please help me.

    Thank you.

    I don't know if it's possible, but you could try to go into display settings and set an external because it is main if possible display and then disable the laptop with Fn + F2 but idk if it will remain inactive if you portable computer power, then on again :/

    Update: how to do this, right-click on the screen area and select the screen resolution while having the connected external display then of you will find a drop down a 3rd or a 4th do not remember but inside, you'll find stuff like show desktop on the screen 1 or 2 to find out what your external display screen number is and apply it to this form then computer laptop screen should turn black as it is turned off and you will see desktop area is on external display so I hope that this has resolved your request.

    PS don't forget to press Bravo if it helped

  • Is Camileo S20 - possible to turn off the screen?

    Is it possible to turn off the screen when you use modes Time Lapse or motion detection to save energy?

    Hey Buddy,

    I downloaded the manual to the user off Camileo S20 and searched a little, but unfortunately I can't find any information about turning off the screen when you use Time Lapse or motion detection. It seems that the screen is always enabled.

    But you can connect the AC adapter when recording movies. If you still have the power. :)

  • Turn off the screen during the call

    I'm working on an application BB10 requiring to be able to turn off the screen in the same way as holding it close to your face during a call. What can I use to deactivate and reactivate the screen?

    I solved this by adding a container around the outermost container in the hide/show of the container and QML file inside in response to proximity sensors readings.

    I posted a question and answer on Stack Overflow to explain it: turn off the screen during the call

  • Venue Pro 8 - button / stop does not turn off the screen

    I just got a coming 8 Pro (32g).  The user manual says that I should be able to press the power button and turn off the screen.  However, when I press the power button, nothing happens.  I can for 4 seconds and the PC will ask to stop, but pressing on this button does not put the tablet in standby or turn off the screen at all.  I have to go to settings-> Power-> sleep just to turn off the screen.

    Yes, I checked the setting of the button / stop under control panel, and it is set to "Sleep" for all cases, battery and plugged in.

    Is there another setting somewhere to turn on the power button to turn off the screen?

    (Oops, deduplication)

  • Turn off the screen without home (800w)?

    I miss my 650 feature when I'm in an application and press the power button, the screen would just turn off. With the 800w, the unit displays first screen today, and a second pressure is necessary to turn off the screen. It's two presses it and sometimes extra work to get back to running my application. Solutions or workarounds for this?

    That should do it.  Scroll to view #33.

    Message is about: Treo 800w (Sprint)

  • Cannot turn off the issue of jam and paper cartridge (both at the same time)

    I have a HP Officejet 8600, running on a wireless home network.  The printer will not work.  We get two messages. 1. Introduction to jam, and I'm going through all the steps to clear paper, including the search for pieces of paper, as well as any leaves.  I found no paper, whole or in part anywhere in the printer.  2. at this point, I get a message that I have a problem with a printer (of ink, installed correctly, etc.) cartridge.  Simply replace us all cartridges, so I know that we are not out of ink.  However, when I opened the door to the area of printer cartridge, the cartridge does not move where I can check it out.  There's just right.  So I'm "stuck".  I don't know how to get the cartridge door to roll over so I can check!  I turned off the computer several times and tried to reset things, but nothing seems to work.  Any suggestions?

    Followed - I turned off the printer.  Then opened the cartridge and reaches into the printer access door.  Without moving the cartridge door, I pressed each cartridge to make sure it was placed correctly.  Then, shut the door and back running the printer.  The printer seems to start correctly.  I then opened the door, the door-cartridge moved where I could access them normally.  I double checked that each cartridge is installed and closed the door.

    At this point, everything seems to work properly.

  • Android app can turn off the screen?

    can any Android or app Android worn turn off the screen?

    I tried two Android applications that claim to turn off screen tap on the icon, but nothing happened. I guess that it does not work on BlackBerry.

  • How can I turn off the screen of welcome in PS CC 2015

    How can I turn off the screen of welcome in PS CC 2015?

    Edit > Preferences > General: check "don't show welcome screen on launch.

  • I apologize in advance if this isn't the right forum, but I need to do a reformat on this computer.  My question is, after you turn off the CC, PS, LR and bridge I have to uninstall as well?

    I apologize in advance if this isn't the right forum, but I need to do a reformat on this computer.  My question is, after you turn off the CC, PS, LR and bridge I have to uninstall as well?

    If you want to reformat the hard disk, in erasing all data on the computer, there is no need to uninstall.  Deactivation is sufficient.

  • Video projection turns off the screen of the computer - S1410-604

    I have a problem with my S1410-604 in what it will appear not video (from the DVD player or the clips inserted into PowerPoint) through a data projector without turning off the computer screen. I called Toshiba who told me 'this particular model does not support this feature. I discovered that it's also a problem with the M30 range. I think replacing it with a M40, but I want to be sure that the problem will not recur. I called Toshiba again and told me that this time it was a software issue and was likely to be a problem with their full range, but I can 'download something '. I talked to an another techie who said he had never heard of the problem and that all the computers up to date would be OK too. Two questions: 'download something' to solve the problem, and if so where, or failing that if I don't have to replace the computer, will be the range M40 do I want that it?

    Hi John

    Unfortunately I can't give you a precise answer, but I know very well that if you use display for laptop and external monitor or projector at the same time, it is possible that DVD movie or video applications will be displayed on LCD.

    Try please go to an external device only and after that left the movie DVD or Power Point presentation.

  • Satellite A660 - 11 M Comment turn off the screen when I download?

    I just want to know how in front of the screen to save power and protect the screen, someone tell me please! Thank you very much!

    In the power option, choose the duration you want to turn off the display (of 1 minute... never)

    http://img249.imageshack.us/img249/3229/powersettings.jpg

  • Turn off the screen during execution of operating system

    Hello
    Is there a way to disable the display of a Toshiba L300 19 f while the system works (plays music for example)...?

    Thank you.

    Of course you can do it.

    I do not know what power profile that you use, but if you use the balanced power plan type parameters and sets Turn off the option to display for 1 minute.
    I do the same when the laptop is running and when I want to listen to my favorite online radio station. I put it at 1 minute.

Maybe you are looking for

  • Cannot set in AHCI mode for disc SSD NB300

    Hello I have a Toshiba NB300 netbook, running Windows 8 Pro 32 bit, very happy with it!I have a Corsair 3 112 GB Force SSD drive is installed, and everything seems to work fine! Read on the SSDS, I see that a better performance for executing the SSD

  • windows 7 32 bit laptop required usb controller driver hp 15-d010tu(product id-F6D31PA#ACJ)

    Hello urgent need win 7 32-bit chipset drivers for my client... Please its very urgent im unable to find.

  • Display the date and time on the taskbar

    I just upgraded to Vista Premium 64 for Windows 7 Professional as well as the date and the time in the taskbar display became static at 07:25 08/01/2010. When I turn the date and time of the show, but I can't find a way to display the correct informa

  • Need driver Audio for Windows server 2003 for the INSPIRON 1545 laptop

    Hi all I need Audio and video drivers for my new laptop computer Inspiron 1545 laptop. It now supports drivers for Vista, XP and Windows 7 only. I installed Windows server 2003 to install SAP. But I am unable to get the sound.and not able to install

  • Authentication for switches

    Hello I have ben using the AAA command sequence and get my TAC routersauthenticated Server SE 4.2.Now I need to get cisco 3560 and 6513 switches authenticated by the same ACS server, kindly suggest if modifications may be required in orders. AAA new-