Turn on the problem.

How can I get my iMac to propel to the top? He gets to midway up and then stops.  Have you tried the unplug and hold down the button bugs and that they did not help.

What you're saying, looks like your iMac's hard drive is damaged. OS X will try to repair the disk at the start, but he can't and he died in your Mac.

The best thing to do right now is take the Mac at the Apple Store or dealer to get a diagnosis or repaired. You can also try to boot your Mac from OS X Recovery (if you bought your iMac after July 2011 or if you are on OS X Lion or newer) or the Mac OS X installation disc and run utility disk to see if he can repair the disk, but this probably will not work. I really hope that you have a backup of your files, because you'll need.

Tags: Mac OS & System Software

Similar Questions

  • Turn off the problem on Satellite Pro A210

    I'm having a problem with my Satellite Pro A210, running on XP. It seems to turn off without reason. I don't think it's a problem of overheating as it can sometimes after only a few minutes of use, and can stay on the day without problem. It is as if he goes into hibernation, although the blue power light remains on, but cannot be restarted without turning off the power and then walk back.

    Someone at - it ideas? Thank you.

    Hello

    could you please tell me the following things:

    1. which modelnumber does your machine have? (you can check on the nameplate on the bottom of the machine)
    2. what version of BIOS is installed?

    Welcome them

  • Alienware 17 R3, 15 R2, R2 13 not turning on the problem (the reason + FIX)

    Many people including me have exactly the same problem where their Alienware Laptop lights once you stop him for no reason at all. Now, people DO NOT panic! There is nothing wrong with your hardware. The laptop is perfectly fine. What is causing this issue is the BIOS they come out (1.2.12, 1.2.13, 1.2.14) these BIOS cause this problem ive never had an issues before on the latest bios of 2015 that was installed on the Alienware when I bought it until I've updated the above bios. Alienware I please ask you to not release a bios that would cause problems to people and please do some intensive tests before releasing anything. The sticky on the forum here has fixed the problem though, but he may return.

    This will solve your problem, it is said in this link install BIOS 1.2.13 or more, BUT DO NOT, and instead when the computer turns on after you follow the instructions for the fix mentioned in the link below, download BIOS 1.2.8 and install it, then 1.2.8 after you won't have the problem more.

    http://www.Dell.com/support/article/us/en/19/SLN301252

    1.2.8 is BIOS, I recommend to all install on their computers laptops alienware

  • Photosmart C6180 turning on the problem.

    Whenever I turn on my printer, I hit the power button and it begins to start. HP shows the icon and the progress bar goes, but then the screen goes black and it is turned off. He then proceeds to restart and the same thing happens. I got a time show a message and it says use the power button to disable the printer. I hit ok and it died on me and has continued it's restart cycle. I leave for a good 30 minutes and finally abandoned. I had to unplug it so it would interrupt attempts to start. I guess there is a problem with it start? Nothing is connected to it except the power cord. Is there a way can I fix? Thanks for your help.

    Hey riptex I found a solution today and thought you might want to try too. I found it here http://www.fixya.com/support/t2270571-c6180_keeps_powering_shuts_down

    Introduction Perform a semi full reset to set all the parameters of the user menu, settings of telephony, personal country header information and language of the user interface, memory fax, fax journal information, speed dial settings and mailing lists and junk fax on default settings. Perform a reset full semi the all-in-one

    • Use the key to activate the product.
    • Remove the power cord from the product.
    • Press and hold the # and 6 buttons.
    • While now the buttons, plug the power cord to the product.
    • Continue to hold down the buttons down until the color graphics display becomes empty, then release the buttons.
    • Use the key to activate the product. Reset information appears on the screen color graphics.

    I hope this helps you!

  • My new Xperia XA of the ultra network turn catch the problem!

    Initially I bought Xperia double M5, but it's a completely defective unit! And finally, who had died! Then after 3 months harassing Sony Center replaced me a XA ultra new Xperia.
    I use it for 13 days until now, I am facing problem with the signal from the network! He can't catch the Tower network correctly! Where other mobile do with the same network operator at the same position with complete tour! Signal bar is always as a point! Never complete! Smoking 2 or 3 bars at least! What the * beep * Sony! I am from Kolkata and I use AirTel sim. Already taken a new nano Sim, so no card sim or network problem!
    Now help me guys... Please. What I can do...
    Thanks in advance

    Do not lean on the bar, do this with two phones

    Settings > about phone > status > signal strength > what do you see?

  • Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is restless))

    Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is agitated and it is not difficult to work with him because I like and what I should I do?))

    Serial number C02FD2CPDF8V

  • MI iPhone 5s come, turn the changes when I place my finger close to her. How to solve the problem?

    Its been almost 9 months since I bought the phone. the problem started a few months back, but it was not frequent it. Whenever I take my finger near it or place it on the ringer switch, it changes abruptly from his State to ringtone and then go back to vibrate. It is very annoying when I have to play games in landscape mode.

    It seems that your switch as expected. Do you mean the physical switch is so loose? He doesn't have to show the orange line up to be turned on/off in order to remain silent?

    Another suggestion would be to return your phone and hold it so your index finger is on the side of the iPhone which has no switches or buttons. You can return your phone either in landscape mode.

  • my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

    my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

    Have you tried to connect your iPhone to iTunes or the wall charger and let your iPhone for 5-10 minutes to charge its battery?

  • Problem turning on the Satellite Pro S500 without battery

    Hello!

    I have the following situation with my Satellite Pro S500-115:

    The battery seems to be faulty now (it loads more and Win 7 Pro told me to replace it).
    When I turn on the laptop and the battery is connected, it works for a few minutes and then it suddenly off.

    But even if I remove the battery and the laptop connected to the DC IN, when I press the turn on button have nothing happens!

    If the laptop should not be able to operate in such circumstances, which is only connected to the electric network and with the connected battery off? I have to set in order to operate like this?

    Thanks in advance!

    > The battery seems to be broken now (it loads more and Win 7 Pro told me to replace it).
    > When I turn on the laptop and the battery is connected, it works for a few minutes and then it suddenly off.

    My old laptop battery is dead too much 6 years It's possible to use the laptop in the dough mode for just two minutes after the battery is empty, but I use the notebook with the AC adapter connected and that is why I don't need to replace the battery.

    > Shouldn't the laptop be able to operate in such circumstances, that is only connected to the electric network and with the battery connected off? I have to set in order to operate like this?

    Usually the laptop should be able to turn on and operate without battery connected.
    My laptop works fine with an adapter connected only. So what to say maybe the ESF is also affected, but it's just a suggestion

    But you must check if the BIOS is in place to this day... sometimes a BIOS update could solve some problems of power and battery.

  • Everything has been done to solve the problem with the FileVault have to be disabled in order to get the lights on the keyboard turns on at startup on the macbook pro?

    Everything has been done so far to solve the problem associated with the FileVault have to be disabled in order to get the keyboard lights turn on at startup on the macbook pro?

    I use FileVault. The keyboard on my MacBook Pro lights work perfectly. I'm under El Capitan 10.11.3.

  • I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility.

    I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility. However, the next time you start, the startup process is blocked to halfway to new (on the screen with the toolbar and the status of apple). I want a more permanent solution to reinstall the operating system every time. Would appreciate someone's suggestions and thanks in advance.

    Replace your hard drive.

    You have a backup of trust? If not, buy a disc of exterrnal for that as well.

    The progress bar from the left end at the beginning of the commissioning indicates that your drive has been so damaged, it could not be mounted. Five minutes of progress bar is shown as it does the equivalent of disk utility (ERD [Directory]). If you have reinstalled several times and the problem is not fixed, your drive is in solid form.

  • my laptop turns off when I play a gamehouse game. can you tell me fault could be the problem?

    whenever I try to play a game on gamehouse games my laptop turns off.  can you tell me whats going on.

    Hello

    1. what operating system is installed on the computer?

    2. this happens with all games or only on that particular game?

    3. you get any error message?

    4. are you play online or is installed on the computer?

    5. don't you make changes to the computer until the problem occurred?

    I suggest you to follow the steps from the link below and check if it helps:

    Game hangs or quits unexpectedly: http://support.microsoft.com/kb/303032

    (The above article is also valid for the game GameHouse)

    Hope this information is useful.

  • "due to an unidentified problem, windows cannot display windows firewall settings" fixed but still can not visit some sites and the laptop now turns off the coast on me. What should I do?

    I have an Apire one laptop with Windows xp service pace 3. I had to restore it to factory about 3 years ago. Some time after that the sound system began to slow and the Synaptics mouse stop working properly. I can move the pointer, but the left click does not work. It works in safe mode but not in normal windows. I used the Acer eRecovery for correct, but it did not work. I tried to download the driver for the mouse on the internet, but some how it could stop the download. I gave up at tring to fix. Some time in late March or early April, I couldn't access internet and after 22:30. I ran the diagnosis that is provided by internet explore and he said that the HTTP and HTTPS worked but the FTP did not work. AVG later told me my firewall is disabled and there was the possibility to reactivate it and I did. After internet explore stop allowing you to enter certain sites that I wanted to enter, I ran the Diagnostics again and he told me that a firewall client has been the cause of the problem. I tried to control my firewall setting, but had that "due to a problem not identified, windows cannot display the firewall settings". I thought AVG was the problem, so I have unintalled then he returned and attempted to access the firewall but got the same message. I typed in Google MySapce and found this site. I followed a few directions given to others in the thread started by joecarpenter33 and discovered that my firewall has been deleted and Base filtering engine has been deleted also. I downloaded and ran Malwarebytes ANti-Malware and SUPERAntiSpyware Free Edition and tdsskiller. MBAM has found a Trojan. The results of the analysis is less to:

    Malwarebytes Anti-Malware (Trial) 1.75.0.1300
    www.Malwarebytes.org

    Database version: v2013.04.10.14

    Windows XP Service Pack 3 x 86 NTFS (secure/setting network Mode)
    Internet Explorer 8.0.6001.18702
    Ziadie Berry: BERRY-LAPTOP [Director]

    Protection: disabled

    10/04/2013-17:44:54
    MBAM-log-2013-04-10 (17-44-54) .txt

    Scan type: quick scan
    Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
    Analyze the options disabled: P2P
    Objects scanned: 271656
    Time elapsed: 43 minute (s), 42 second (s)

    The process of memory detected: 0
    (No malicious items detected)

    Modules of memory detected: 0
    (No malicious items detected)

    The registry keys detected: 0
    (No malicious items detected)

    The registry values detected: 0
    (No malicious items detected)

    Registry data items detected: 0
    (No malicious items detected)

    Files detected: 0
    (No malicious items detected)

    Files detected: 1
    C:\RECYCLER\S-1-5-21-4674304-3331980883-3375822000-500\$7832f44fdd2ba165f6ea01bec7f363fd\n (Trojan.0Access)-> quarantined and deleted successfully.

    (end)

    Malwarebytes Anti-Malware (Trial) 1.75.0.1300
    www.Malwarebytes.org

    Database version: v2013.04.10.14

    Windows XP Service Pack 3 x 86 NTFS
    Internet Explorer 8.0.6001.18702
    Ziadie Berry: BERRY-LAPTOP [Director]

    Protection: enabled

    10/04/2013 23:43:49
    MBAM-log-2013-04-10 (23-43-49) .txt

    Scan type: quick scan
    Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
    Analyze the options disabled: P2P
    Objects scanned: 269636
    Elapsed time: 49 minute (s), 41 second (s)

    The process of memory detected: 0
    (No malicious items detected)

    Modules of memory detected: 0
    (No malicious items detected)

    The registry keys detected: 0
    (No malicious items detected)

    The registry values detected: 0
    (No malicious items detected)

    Registry data items detected: 0
    (No malicious items detected)

    Files detected: 0
    (No malicious items detected)

    Files detected: 1
    C:\WINDOWS\assembly\GAC\Desktop.ini (Rootkit.0access)-> quarantined and deleted successfully.

    (end)

    I ran the Diagnostics today after Internet explore and my other browsers stop allowing me to internet access. That's what came back:

    Diagnosis of last run time: 17/04/13 17:48:14 WinSock Diagnostic
    WinSock status

    attmpting error information to validate the Winsock base providers: 2
    error not all entries could be found in the basic services provider winsock catalog. A reboot is required.
    user redirection of information in support of the appeal

    Diagnosis of network adapter
    Network location detection

    Info to help home Internet connection
    Identification of network adapter

    Info network connection: name = Local, peripheral network connection = Realtek RTL8102E Family PCI - E Fast Ethernet NIC, MediaType = LAN, type = LAN
    Info network connection: name = wireless, peripheral network connection = Atheros AR5007EG Wireless Network Adapter, MediaType = LAN, type = Wireless
    Info both Ethernet connections and wireless available, ask the user for selection
    required user input action: select network connection
    Info Wireless connection selected
    State of the network adapter

    Info network connection status: connected

    HTTP, HTTPS, FTP Diagnostic
    HTTP, HTTPS, FTP connectivity

    WARN HTTPS: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
    warn HTTP: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
    warn HTTP: error 12029 connecting to www.hotmail.com: a connection with the server could not be established
    WARN HTTPS: error 12029 connecting to www.passport.net: a connection with the server could not be established
    WARN FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
    WARN FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
    error could not make an HTTP connection.
    error could not make an HTTPS connection.
    error could not make an FTP connection.
     
    Still, he remains connected to the wirelesss connection, but won't let me access the internet. Right now I use a proxy to help, but access to the sites are limited.

    I used the tweaking software and my firewall is back but, I have yet to visit some sites and the laptop now turns off by itself.

    Hello

    Follow these methods.

    Method 1.

    Start the computer in safe mode with network and run a full scan of computer viruses.

    To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

    Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

    Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

    Method 2.

    If the steps above do not help, then try to scan the computer using Windows defender in offline mode and check if that helps.

    Search for spyware and other potentially unwanted software: http://windows.microsoft.com/en-US/windows7/Scan-for-spyware-and-other-potentially-unwanted-software

    What is Windows Defender Offline? : http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline

    Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

    Method 3.

    You can create a new user account and check. Once the new user account works fine, then copy the data from the old user account for the user account.

    How to copy data from a user profile damaged to a new profile in Windows XP: http://support.microsoft.com/kb/811151

    Let us know if you need assistance with any windows problem. We will be happy to help you.

  • Go off & on several times before the monitor turns on. Comp seems to start OK but the problem is with the screen.

    Original title: XP start help please...

    ... are to be turned off & on several times before monitor lights. Comp seems to start OK but the problem is with the screen. Do I have to make a boot disk & if so - HOW?

    Hello

    ·         What is the brand and model of the computer?

    ·         You get the error message?

    ·         Did you check the connection of the cable to the monitor?

    ·         Have you tried to update to the latest graphics card and motherboard chipset drivers?

    First, try to connect your monitor to a well known PC, maybe the old laptop that you use now. If the monitor works, the problem is with the video card in your PC. If the monitor does not light, the monitor. It is usually cheaper to buy a new monitor that in order to be an old repaired, unless the monitor is still under warranty.

    Try connecting a monitor well known to your PC. If the monitor works, your old monitor is fried and needs to be replaced.

    If your monitor works when connected to another PC, the problem could be your video card. First, and then you turn on your PC, the power and cooling case fans run they. If they do not, it could be the power supply.

    Then, open the computer case. Before you do anything inside, unplug the power supply.

    IMPORTANT! Touch any metal part of the computer case to connect to the PC. A single static spark can destroy computer circuits.

    If the video card is the type of card that plugs into a slot on the motherboard, remove the screws or attached at the top of the card, remove the card, to manipulate the card by the edges to avoid disturbing the circuits on the card, carefully and re - install the card. Sometimes simply reinstalling the card corrects the problem.

    If this does not work, replace the video card with a card of similar type. Perhaps now is the right time for an update of video card.

    If the video card is integrated into the motherboard, you can install a new card in one of the PCI slots on the motherboard. When the PC starts for the first time, go into the bios and disable the onboard video.

    Resources for troubleshooting problems in Windows XP

    http://support.Microsoft.com/kb/307960

  • start-up problems: when you turn on the computer, it goes through all the trunk starts to load windows xp then starts again again and again

    When you turn on the computer, it goes through all the departures start loading windows xp then again again and again...

    Hi Keryn_Jansen,

    1. did you of recent changes on the computer?

    2. you receive an error message?

    3 when was the last time it was working fine?

    Check if you can start the computer in safe mode or from the last good known Configuration.

    Advanced Troubleshooting for General startup problems in Windows XP

    http://support.Microsoft.com/kb/308041

    How to fix a computer that does not start

    http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

Maybe you are looking for

  • L50-A-19N satellite will not start in the BIOS

    Hello I have a problem with my laptop.I have installed 8.1 and fedora 20 windows. I was in fedora, when I decided to restart Windows.Instead of grub, I saw message with the error and my notebook has stopped booting. I pressed the power button / stop,

  • How to do the downgrade Windows 8.1

    Hello I did windows 8 (default value in my U) upgrade to 8.1 windows, but I do not work with this new OS... is there a way to downgrade to windows 8 back? Unfortunately, I have no recovery of my previous OS...

  • BIOS update fails (SoftPaq sp59792, version F.53Ap01)

    HP Support Assistant on my taskbar keeps telling me "significant action". The important action is an update of the BIOS (SoftPaq sp59792, version F.53Ap01). I have taken the following steps several times, but the "Important action necessary" message

  • Home Publishing 2000 exe problems

    I have reinstalled Home Publishing 2000 on my PC but when I try to run the program I get an error message telling me that some components are missing or broken. The Help Menu informs me that this means that a JPG and GIF graphics filter is missing. W

  • disabled automatic update

    My shield of security in the taskbar indicates the automatic update is disabled.  When I try to solve the problem, it said I have to go to systen and click auto update, and turn it on.  When I go to automatic update it is said that it is on.  I hit i