Turning on and turning off T61 takes about 5 minutes for each.

Similar Questions

• We know the answer slow printer. We use XP and it takes about five minutes for the printer to answer.

  We know the answer slow printer.  We use XP and it takes about five minutes for the printer to answer.

  Hello

  1. have you you can all changes on the computer before this problem?
  2. What is the brand and model of the printer?
  3. have you updated the printer driver?

  Try to run the fix it tool in the following article and check.
  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

• It takes about 6 minutes for the computer to boot.

  * Original title: Windows 7 Starter

  It takes about 6 minutes for the computer to boot. I mounted early and disabled now needed to start programs.

  If it were my system:

  1. I'd be more suspicious of malware, run ADWcleaner and have a good program antivirus https://toolslib.net/downloads/viewdownload/1-adwcleaner/

  2. I would like to delete all programs that claim to make it work better, safer or faster computer.  The vast majority of them is actually malware

  3. I remove any "protection" software on your computer and let the only Antivirus product quality - more below...

  4. I would use the manufacturer of my disk drive hard testing program to ensure that it is not a failure

  5. I would like to be sure that none of the drives are more than 75% in use

  6. I would check my memory using the auditor memory Windows 7

  7. I would like to install and run Autoruns to check what is in the startup process

  8. AND, above all, focus on the applications installed.  Some of them are notorious resource hogs who insist on running at startup.

  9. I would like to delete startup programs/applications, unless I really need to start

     Common unbelievers that cause slow-start ups:

  • Garmin Express
  • Roxio anything
  • Skype
  • uTorrent
  • FrostWire
  • Trusteer
  • Dropbox
  • OneNote
  • EverNote
  • All Apple products
  • QuickBooks
  • Spotify
  • Pandora
  • AOL desktop
  • Some games, especially online ones

  What Antivirus buy?

• Start-up phase takes about 10 minutes for bot

  of course I changed something on my departure upward. now, it takes about 10 minutes before my office show upward. When I turn my computer on my screen is blue, almost black, and I get a dash flashing (-) in the upper left corner. it flashes for about 10 minutes. before he finally start. Help!

  [Moved from comments]
  

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are facing problems when the computer starts.

  1. what operating system is installed on the computer?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Check if the problem is caused by some faulty devices on your computer. I suggest that you disconnect all external devices except the mouse and keyboard to your computer and check to see if the same problem happens.

  Method 2: Try to run the troubleshooter of Performance:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 3: Try to boot in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  (For Windows Vista)

  Method 4: If the question does not exist in Mode safe mode then try to set up your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.

  More information: Optimize Windows 7 and Vista for better performance:

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  Please follow these recommended steps and post if you still experience the problem.

• Somehow my new Apple TV 4 causes my Panasonic Plasma TV turns off every 30 to 60 minutes.

  Somehow my new Apple TV 4 causes my Panasonic Plasma TV turns off every 30 to 60 minutes. I thought for sure I had capacitor problems with my TV (he is about five years old) but my wife suggested to check our new ATV4 because the problem started just after Christmas when we got the new ATV4 and the problem occurs with our ATV3. I was skeptical but I have tried to unplug the power cord on the ATV4 and to my surprise the TV cutting question disappeared, so I have to have my ATV4 unplugged when not in use and plug it in when I want to use it, a real pain in the *. If accidentally, I forgot to unplug my ATV4 after using my TV stops every 30 to 60 minutes after my ATV4 is connected and not in use. I'm at a complete loss as to what is causing this problem. For any help or suggestion would be appreciated.

  ATV turns off after a certain period of time in the settings: http://help.apple.com/appletv/#/atvb7a7550e3

  The ATV also has the ability to control the power of the TV via the HDMI cable, if the value.

  I will try to put the ATV to sleep immediately after use, as explained above and see if the TV turns off then.

  If so, go into the settings, remote controls and disable control of your home with remote control entertainment system and see if only he stops.

  When the TV turns off, it is on the entry of Apple TV and the screen saver or you look at another entrance, for example, a cable?

• How can I turn off the xbox 360 controller wireless for pc

  How can I turn off the xbox 360 controller wireless for pc

  Hello!

  I made a small application for this! It is called XboxExt (Manager of the Xbox 360 controller). There is no way to disable the controller in a failure to properly on PC. With the Games Games for Windows Live you can press the GUIDE button on your controller, and you can turn it off.
  So my app is doing the same thing, but not only with Games for Windows Live games. So you can use it anywhere, anytime.
  Web site: Xbox 360 controller Manager
  Best regards
  Parker

• Screen ACL in Windows 7 towers / turns off in 1 or 2 minutes on its own

  Strange problem started recently. My computer laptop LCD screen turns off in 1 or 2 minutes on its own even to power cable. I checked and have already reset all power plans, but the screen seems to stop on its own. I was not able to understand the problem.

  Also changes to the power management has no effect on this behavior. For example if I increase the delay before the screen stops at 10 minutes (with or without battery) it always closes the screen in 1 or 2 minutes

  Can you please suggest what could be the problem.

  I have an Intel Core 2 duo processor - x 64-HP DV4t laptop

  Thank you

  Varun

  Varun

  Hi Varun,

  ·        This happens to you while you use a particular program or are the random problem?

  I think it is a hardware problem and you may need to contact the manufacturer of the laptop computer for further assistance.

  In addition, uninstall any software of management of power given by the manufacturer and check.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Satellite is really slow and takes about 10 minutes to open a session

  Hello

  My satellite phone is really slow and takes about 10 minutes to open a session. It also takes awhile to open up applications in particular the internet. Once the internet is open, it takes a while to access the net. The application actually drags across from the scene and it looks like a curtain closing additional idling.

  Need help.

  Concerning
  Russ

  Hello

  Have you checked the CPU usage rate?
  Start the Task Manager and check if any strange background process needs the full CPU performance.

  I also recommend to check the laptop for some viruses and malware. These programs could make the laptop and the lazy BONE.

  However the portable equipment could bad work.
  You should check the memory using the Memtest86 program. It s freeware. Check the HARD drive for bad sectors and also try to defragment the HARD drive!

• You try to transfer data to new computer, takes about 30 minutes to collect data, and then told me that it will take 33 + hours of transfer

  I have 2 PC, two 40 g X 2 g, an old score about 12 GB of data, 71% free, new is ready to receive. When I make the connection with a null cable and start, it takes about 30 minutes to put together and start the transfer, but it gives a transfer time of 33 + hrs and that means, I let it run for about 6 hours, and he was always less than 6% of fact. No games or large, larger files is about 12 MB. Any help? Bob

  If cable "null", you hear a serial RS-232 cable, you probably chose the slowest method of data transfer possible.  A serial cable tops out at raw data of 115 Kbps (115 000 bits per second) rate the most current Ethernet 100 Mbit/s connection - is about 1000 times faster.

  I don't know why some s/w you use takes 30 minutes to "collect" information before starting the transfer, but if you have about 12 GB of data (and don't have / want an Ethernet connection), why not just get a big enough USB.  You can get a 8 GB USB key for less than $15 and a 16 GB for about $20.  If you have USB 2.0 (which is likely, unless your old computer is older than 10 years), the maximum raw data rate is 480 Mbps with rates effective data around 20-30 MB/s for the memory sticks.

  At 20 MB/s, 12 GB should be transferred in about 600 seconds or 10 minutes.

• Aero on vista on seems to make execution slower and start upward after the microsoft icon on screen-it takes about 1 minute to get on the desktop! Otherwise everything else is relatively ok - for vista, that is _

  I ran a check for preformance on my vista and it came as 2.6 - slow due to the Aero.  How to solve this problem and have rated overall performance.  Also when starting my Acer, it takes about 1 minute to start after the microsoft icon. After 1 minute, then the system tray and the desktop is displayed.  What's wrong?  I ran all the controls of viruses and worms, and all have been supported by Kaspersky or deleted, fixed or quarentined!
  Help!

  I ran a check for preformance on my vista and it came as 2.6 - slow due to the Aero.  How to solve this problem and have rated overall performance.  Also when starting my Acer, it takes about 1 minute to start after the microsoft icon. After 1 minute, then the system tray and the desktop is displayed.  What's wrong?  I ran all the controls of viruses and worms, and all have been supported by Kaspersky or deleted, fixed or quarentined!
  Help!

  You can read this:
  http://www.Vistax64.com/tutorials/81176-speed-up-performance-Vista.html

  t-4-2

• Has conducted an assessment of WEI, and, the window according to the analysis is complete, but progress seems to be about 95% and wrote "this may take a few minutes. Your screen may blink during the process.

  Original title: WEI

  I recently did a full scan of the system with all the tools available and used windows manufacturer to scan the hard drive, HARD drive program. Everything is cleaned up and updated. I conducted an assessment of WEI, and the window said the analysis is complete, but advances seem to be about 95% and wrote "this could take a few minutes. Your screen may blink during the process. "It was about 20 minutes so far and the box on the bottom, said"Cancel ". I'm going to be it, but ask yourself what can be the issue. Any help/ideas would be appreciated.

  Yes, I think that he / she forgot to mail the scanner :)

  The link I posted has a Mr. fixit for me on this matter use you it?

  You can scan with mbam free :/

  https://www.Malwarebytes.org/antimalware/

• L20 - 264 takes about 10 minutes to stop

  Hi my L20 - 264 is very very slow when stopping down, standing or hibenating.
  Select start/turn off computer he can takes about 5 minutes to bring up the options bar. Of and then selecting turn off for example then pick up another 5 minutes before the laptop actually powers.
  There is no software hogging the system because I've been surfing or play media files.
  Is due to the fact that it has only 192 MB of ram, because I thought the upgrade anyway. Or I am barking the wrong tree?

  See you soon

  Hello

  I agree with Jonathan

  A little more RAM can be very good, and it can make your device faster and more flexible. I recommend you to check all active running process. Generally, many of them is absolutely useless, but they can slow down the system quickly especially if the device does not have a lot of RAM.

  I recommend clean up the operating system, use the Defragmenter tool and check applications that start with Windows. Many of them may be disabled. Enforcement antivir may also slow the operating system currently running. Check all this. I hope that your device will work better.

  By the way: the compatible memory module for your device are
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)

  Good luck!

• Startup takes about 5 minutes to complete to start on my HP laptop.

  Desktop loads upwards just fine, fast, straight bar tool with the exception of the Wi Fi Connected icon, it takes about 5 minutes to appear, this time on that hard drive lite is a little hard. If you tap the icon on the tool bar network bars she says you are connected. If you try to open something out of the Office during that time, he just sits there watching waiting for you to start to complete. Once starting over thing work fine, that too, if you plug in a USB key during the startup time (5 minutes), you hear the sound that you always hear when you plug one but it doesn't appear in Windows Explorer until after 5 minutes of waiting. I did a system restore to a moment where it was sunny and that did not help. I ran a defrag on the C drive, I ran a disk check, with no errors found. I look in the task during this time Manager, and you see no programs running. I run Malwarebytes and Super Anti Spyware and nothing detected. Can someone help me with this?

  Hello

  Welcome to the Microsoft Community Forum.

  I understand that the process of starting your computer is slow. Let me ask you a few questions to better understand.

  1. What security software do you use?
  2. You did it all meaning hardware or software change?
  3. You get the error message? If Yes, when and what is the exact error message?

  I suggest that you perform a clean boot procedure, and then try to install the add-in.
   
  See the link to perform the clean boot.

  Method 1: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Important: Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  Note: See " " How to reset the computer to start normally after a boot minimum troubleshooting "to prepare the computer to start as usual after troubleshooting. "

  Method 3: Optimize Windows performance

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Note: Data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk be lost.

  Method 4: You can use the provided patch below it article and check if that helps to solve some problems.

  http://support.Microsoft.com/mats/slow_windows_performance/

  You can also see the article: Unexpectedly slow start in Windows 7 or in Windows Server 2008 R2

  http://support.Microsoft.com/kb/977419/en-us

  Please come back if the problem persists, we will be happy to help you further.

  Thank you

• Roxio takes about 190 minutes to compress my dvd for burning, is this normal?

  Time to compress the video

  I have a laptop Dell Inspiron N4110 Win7 professional.  The laptop uses a dual-core Intel Pentium B940 / processor dual thread clocked at 2 GHz with 4 GB RAM and 200 GB of free space on the hard disk.  I am recording video analog (NTSC) and stereo audio to aid Easy VHS of Roxio hardware to DVD / software package.  Video is scanned in real time by the A/D converter.  A 100-minute VHS video produced a mpg of 6.13 GB hard disk file.  The compression process of Roxio to shrink the file to mpg of 6.13 GB less than 4.7 GB for recording on a DVD + R single takes about 190 minutes.  Is it a normal time for my laptop?  Are there other programs of compression that would be much faster?    Would be a better laptop with an Intel quad core / 8 processor i7-2860QM thread and 8 GB of RAM to reduce the significant period of time compression, for example less than 60 minutes?

  DVD-video is encoded more time-based
  as the size of the file. Compression is not necessary.

  A video file of 100 minutes should fit on a 4.7 GB DVD.

  Have you tried Windows DVD Maker?

  Windows 7 - burn a video DVD with Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
  (Windows 7 Home Premium / Professional / Ultimate / Enterprise)

  The following freeware can also be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD-flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in most
  free-standing DVD players... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  To allow a longer time on the DVD... left click the
  The project settings button / select video / open the target
  Bitrate of drop window. Choose a will more small number
  result in a longer time on the DVD. Press on... Accept.

  The vertical bar to the left of the screen will tell you
  How much compression you need.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  software advanced as Sony, Cyberlink, Nero, Roxio,
  Adobe, Ulead, etc... but at least it is a start.

  Good luck.

• The Print Test takes about 15 minutes to complete.

  I have the same problem with a D1520. I went through all the self-help and the Test print. The Print Test takes about 15 minutes to complete.

  This is caused by the failure of one of your cartridges.  Remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.