Turtle beach Px51 bluetooth headset does not not with dongle bluetooth on windows 7

Similar Questions

• My headset does not work after update of Windows 8

  His problems-Windows 8

  I just brought a new laptop running windows 7 with the free update of windows 8. I've now updated to windows 8, but my headset does not work, any help?

  Hello
  I have another effective solution

  For laptop plug in the battery and the power, then press power 5 times.
  After the plugin power only and test the plug with headset

  For Pc connect power and then press power 5 times.
  After this plugin power and taking test headphones

• G550 headset does not work after upgrade to windows 10

  After the upgrade to Windows 10, there as no sound from the speakers, I finally saw that the headphones were chosen as a default feature, so I changed the speakers... but now I only get not all the sound through the headphone jack, unless I put them to the audio device by default...

  There seems to be no audio driver for the g550 for windows 10... currently its using the windows high definition Audio Device driver v 10.0

  Is there a solution...

  Fixed it myself... installed the audio driver for Vista 32 bit for the G550 and now back to work both speakers and headphones. the pilot is Conexant High Definition Audio Smart 221

• Bluetooth headset does not work in Windows 8

  I've just upgraded in Windows 8 and my bluetooth headset does not connect (worked well on Windows 7), he could be detected with the mating, but always appear "offline" after having been matched, both headphones are having the same problem, while mice bluetooh work well, is there whatever it might be do?

  I solved the problem.  I upgraded my Lenovo E530 to Windows 8 and the helmet worked.

  I made a copy of the Broadcom Bluetooth 4.0 driver and installed on my HP LPTOP.
  The Voyager Pro + headset now works on the P and Lenovo

• Bluetooth headset does not work with Windows 7 - device is detected.

  I have a Dell XPS 1530, which had Vista 32 bit running. I have recently upgraded to Windows 7 Ultimate. Ever after that the Bluetooth of DELL BH 200 headset does not work with my laptop.

  The bluetooth adapter and the device is fine since I'm able to search and find all bluetooth devices, including my helmet. However, I get a yellow exclamation on the headset under devices. The headset can be paired with other devices such as my mobile and works very well.

  I tried to update the drivers and reinstall the device and the adapter from the Device Manager. We have a similar setup on my brother's computer and it works fine.

  Another thing to watch, would be what battery is used.  I know from personal exp some devices work with Toshiba stack, vs the MSFT pile up.  Do a search and see if anyone else uses a different battery with these devices. Network systems engineer * Zvetco biometrics * Windows Server 2008 R2 * Core 2 6600 @ 3.30 GHz * 16 GIGS RAM * NVIDIA 9400GT * * > please VOTE MESSAGES ALSO USEFUL TO HELP OTHER USERS

• While streaming a archive of the radio show, my headset does not work?

  I can listen to different media sources using headphones, but with Mozilla my headset does not work when you try to stream my favorite (kfjc.org) radio station broadcast archives. Sound continues to my crappy Laptop speakers.

  Thank you! It worked.
  Happy Holidays everyone.

• Compaq cq20 205tu - headset does not work

  I just bought this laptop 3 days ago.

  the speakers are ok, but when I tried to listen to music using a headset, it doesn't! I went to the portion of sounds in the control panel to check if my headset does not work. He says he works. to check this further, I used the option "test" of the computer. I heard the beep on my left and right ears. but when I try to listen to music and watch videos, only the speakers are workin, NOT my headphones.

  Please do help me. I don't really know what to do.

  Thank you!

  I think that you have Vista.

  Looks like your earphones must be defined for the playback device by default because your speakers are still to play the audio.

  There is a white speaker icon in Vista right next to your clock, rightclick it choose the playback device and you will see the window come in the middle.

  Normally the speakers to be on speakers with the green check mark.

  If there is a category for headsets or USB headphones and told to work then you must right-click on your helmet and choose set as default playback device, then apply, ok and restart the computer.

  Try this.

• H390-Logitech USB Headset does not install

  H390 USB LOGITECH HEADSET DOES NOT INSTALL

  After that several attempts - system looking for drivers - will not install driver successfully - tried them all used without success.
  running Windows 7 x 64
  This is supposed to be plug-and-play (game should not mean - search for an hour for a solution should work instantly)
  So what now?

  Hi tunewrite,

  ·         Have you installed the software and the related drivers?

  ·         He has already worked?

  ·         You are able to access the other USB devices?

  ·         You get the error message?

  Follow these methods.

  Method 1: Run the tool and troubleshooting hardware devices.

  Method 2: Try to use another USB port USB headphones and check.

  Method 3: Try to use the headphones on another computer and check if the problem persists.

  For reference:

  Tips for solving problems of USB devices (Applicable to Windows 7)

• Q10 Q10 blackBerry headset does not

  Hi, my headset does not work on my Q10. I tried different and all do not work. Any advice?

  When you plug the headset speaker should get muted. Apparently you have a problem to contact with the Jack of the phone. You can bring back for warranty repair.

  What I've noticed, is that you have to push very strong to get the plug completely. Did you really pushed hard enough?

• Logitech h340′s headset does not install correctly. "Unknown device".

  I use Windows 7 and comes from my brand new Logitech h340′s headset to connect to the PC via the USB port. Unfortunately, the device is not recognized and the driver so do not install automatically, so I can't use my headset.

  Here is the message I get:

  "Unknown device".

  "Windows has stopped this device because it has reported problems. (Code 43) »

  Then when I try the convenience of Windows it tells me that 'the best driver for your device software is already installed. Windows has determined the driver for your device software is up-to-date. »

  Device type: Bus USB controllers
  Manufacturer: (host controller USB Standard)

  I tried to restart, but it still does not work.

  All Windows updates have been installed.

  I really don't know what to do to be able to use my newly purchased helmet.

  Thanks in advance for your help.

  Hello Soraya,

  Thank you for reaching out to us on Microsoft Community.

  Before I can give you some suggestions to solve this problem, I want to collect the following information from you:

  • What is the brand and model of your computer?
  • Significant changes have been made on the computer before this problem?

  I would like to inform you that, "Windows has stopped this device because it has reported problems. (Code 43)" may occur if the peripheral equipment fails or if the device driver fails.

  Step 1.

  I suggest you follow the steps in the following link:

  http://TechNet.Microsoft.com/en-us/library/cc725873 (v = WS.10) .aspx

  See: Also the error codes in the Device Manager in Windows

  Step 2.

  As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  • Click Startand then click Control Panel.
  • Click system and Maintenance, click System, and then click Device Manager.

   

  Note: If the control panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  • In Device Manager, double-click to expand the 'Bus USB controllers', right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  • Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  Do get back to us and let us know the State of the question in the case where you need further help or your next post. We, at tender Microsoft to excellence.

• Headset does not and I can't hear any sound on youtube.

  original title * headset not working not

  I woke up this morning thinking that she's going to be a sunny day until I made that I can't hear any sound on youtube.
  Now, my reaction was to unplug my headphone to my audio jack cable and plug it in again. And then catalyst SHOULD be launched and has notified me that my headset was plugged. But it does not. Then, I realized that my plug in microphone works very well with my microphone. Which was good.
  BUT I noticed that the ONLY way for my "playback devices" figurentsur helmet was if I moved a little left cable into the audio input jack, my headphones would work, but only my right side of the helmet. But as soon as I stopped to put pressure on the left to my cable DISCONNECTED headphones and I had to do it all again. Now, I don't know if it's because of my Windows I installed yesterday WINDOWS 8.1 PRO or because my helmet AND my audio jack are *... Also it does not with another helmet either. So any help from ANYONE, I would be really grateful if I could hear again...

  TECHNICAL DATA:
  INTEL CORE I7
  R9 Radeon 295 x 2
  16gbRAM
  2 TB
  2600 MhZ

  Thank you

  Hello

  Thanks for posting your query on the Microsoft Community.

  The question is limited to the YouTube Web site?

  Sound problems can be caused by cables that are not connected properly, damaged drivers, incompatible drivers, sound settings, missing updates and problems with your sound card.

  I suggest you to external speakers as peripheral by default and check if that helps:

  1. In the area of notification of taskbar beside the date and time system, right click on the speaker icon and select playback devices.
  2. In the sound dialog box that is displayed on the playback tab, click speakers/headphones playback device to select it and activate the buttons below.
  3. Click Properties, and then in the speakers/headphones Properties dialog box that appears, under the Advanced tab, click default settings.
  4. Click apply or OKand you're good to go until you try to reconnect the headphones or speakers.

  If the problem persists, try the steps in the Microsoft Help article and check if it helps to solve the problem:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps and let us know the State of the question, we will be happy to help you.

• Hey guys I have a problem with my turtle beachs x 11 headset PC problem?

  Hey guys I have a problem with my turtle beachs x 11. I think that his problem of windows as it does say not connected when I pluged clearly on the front I see this using sound Manager in Control Panel. Only until you get the sound is to use the part of the Atrium is where I replace my listing of speaker with the turtle beachs taken for the helmet and it dosent read my forehead has the helmet thing and does not with headsets and its really annoying, so what is the problem you ask I can't use the front of a helmet branch so I need the change of the back 100% of the time and I need to switch between the headset and the speaker the only time where the before work is when I remove the speaker jack on the back and then I used his Manager in the control panel and it counts it as a speaker. I want to ask I want it where I can have my speakers work in the back and the front, I can have my headphones and when I want to spend in the speakers and just unplug the headphone part in front of the help I can't keep my pc like this: /.

  What kind of PC you are using? Home build or OEM (DELL, HP, etc.)?
  -If the house built.
  The cable between the Panel before you must have two different connectors to the motherboard.
  You must use the right connector, as we'll pass the speakers turned off when you the helmet
  is plugged into the front panel and the other not.

  If OEM - check support or forums from the mfg.

• Shortcut Ctrl C does not work in the main window of Firefox

  I use Firefox version 38.0.5, Windows 7
  Since the update Ctrl + C shortcut does not work in the main window of Firefox. (I can't copy text from any website using Ctrl + C).

  Click right and using the copy in the menu works perfectly. CTRL V and Ctrl X work fine without problem.

  Ctrl C works fine when copying text from the address bar and search bar, I just can't copy anything from anything in the main window of firefox.
  

  I tried to run Firefox in safe mode, I have also reset firefox and a virus scanner, but nothing has solved the problem.

  If anyone has any suggestions, that would be great. Thank you

  See:

  • bug 1173979 - copy Ctrl + C is broken in the last Irish FF 38.0.5

  Please, do not comment in bug reports
  https://Bugzilla.Mozilla.org/page.cgi?id=etiquette.html

• Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

  My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

  Help please

  Hi asalamk,

  The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

  You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

• ASUS laptop computer: touch screen does not work after update of windows 10

  My touch screen does not work after update of windows 10 in Chrome. How can I fix it?

  Hello

  Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.

  Kind regards.