TUXEDO 8.1

Similar Questions

• Tuxedo MQSeries adapter

  Hello

  Someone could you please provide some documents or explain about Tuxedo MQSeries adapter for Tuxedo 12 c?

  TMSNAME = TMS_MQS-> how to build this MSDS and how is it different from other adapters Tuxedo MQ?

  Kind regards

  Thierry P.

  Hi Nadia,

  Sorry for the delay in replying, Oracle OpenWorld was last week.

  I don't know what other MQ adapters you could refer to the Tuxedo has only one.  An entry must be made in the RM file that points to the libraries MQ and XA switch.  Then build you the TMS with buildtms.  All this is described in the documentationof Tuxedo.

  Kind regards

  Todd little

  Chief Architect of Oracle Tuxedo

• Mix of Java and C on the same server of 12.5 Tuxedo?

  I run an application big Tuxedo who perform a mix of Cobol and C calling each other in the same service.

  Is it possible that I have will convert the Cobol in Java code, so I'll have a mix of C and Java on the same single server?

  Or does the Java Tuxedo should only include Java in a single server

  Hello

  Within the server Java Tuxedo (TMJAVASVR) that the Java code is supported.  If a single server can support native languages as C and COBOL or Java, but not the two together in a single server.

  Kind regards

  Todd little

  Chief Architect of Oracle Tuxedo

  PS there is no 12.5 Tuxedo don't release 12.1.1, alone and 12.1.3.

• How to put mod_tuxedo authentication to connect field of Tuxedo?

  Hello

  I'm trying to connect apache with mod_tuxedo to the 12cR2 with USER_AUTH Tuxedo domain. But all http requests does not tpninit error 8 in the apache log and in the journal of smoking are the password application error message.

  When I put no security side tuxedo, http calls are OK.

  Apache has basic auth with the file provider. I tried Smoking tpusr file and the file passwd apache with the same users and passwd - apache authenticate.

  How can I configure apache/mod_tuxedo connect field with USER_AUTH Tuxedo?

  I can't find documentation.

  Apache config - part

  < location ' / CSMW/WS / ">".

  User need valid

  Order allow, deny

  Satisfy all

  AuthType basic

  AuthName "Tuxedo WS.

  AuthBasicProvider file

  # AuthUserFile/srv/app/at1/mw/httpd/conf/passwd/passwords

  AuthUserFile/app/mw/tux/at1/tpusr

  < IfModule mod_tuxedo.c >

  SetHandler Tuxedo-script

  Tuxconfig "/ app/mw/tux/at1/conf/TUXCONFIG.

  TuxService ENTRYSOAP

  < / IfModule >

  < / location >

  Part of Tuxedo config

  * RESOURCES

  IPCKEY 160002

  NETWORKID TuxAT1

  MASTER TuxA, TuxB

  MAXGTT 5000

  MAXACCESSERS 8000

  MAXSERVERS 6000

  MAXSERVICES 14000

  MAXGROUPS 190

  MAXDRT 600

  MAXRFT 4

  MAXRTDATA 2000

  MODEL MP

  LDBAL Y

  PERM 0666

  USER_AUTH SECURITY

  LAN OPTIONS, MIGRATE

  DBBLFAILOVER 2

  
  

  ......

  
  

  
  

  AUTHSVR SRVID = 1000 SRVGRP = MAIN1 SEQUENCE = 95

  
  

  ......

  
  

  DEFAULT: SRVGRP = ESP1 MIN = 6 MAX = 10 CLOPT = "-o /app_log/mw/tux/at1/stdout.entrysoap EI /app_log/mw/tux/at1/stderr.entrysoap s TP_REQ1:SERVER - C conf/middleware.env s ENTRYSOAP" SEQUENCE = 33

  entrysoap = 6800 RQADDR SRVID = SOAPA01

  ......
  

  Apache config

  
  

  
  

  Log Apache

  [Game 28 mai 12:39: 05 2015] [error] mod_tuxedo: don't tpinit/app/mw/tux/at1/conf/TUXCONFIG: 8

  [Game 28 mai 12:40: 11 2015] [error] mod_tuxedo: don't tpinit/app/mw/tux/at1/conf/TUXCONFIG: 8

  [Game 28 mai 12:57: 41 2015] [error] mod_tuxedo: don't tpinit/app/mw/tux/at1/conf/TUXCONFIG: 8

  Journal of smoking

  
  

  125741.ttux1! httpd.5406.896858080.1: LIBTUX_CAT:6244: ERROR: Application password does not match

  125741.ttux1! httpd.5406.896858080.1: LIBTUX_CAT:6247: ERROR: could not establish the security context. Error code 60, minor_status 4294967289

  125741.ttux1! httpd.5406.896858080.1: LIBTUX_CAT:6234: ERROR: authentication fails with error 70

  Kind regards

  Michal Fürst

  Hi Michal,

  It is an ovesight in the implementation of mod_tuxedo.  If you need mod_tuxedo to run a tpinit() with the credentials of the user to a secure USER_AUTH area, please fill out a bug with My Oracle Support.

  Kind regards

  Todd little

  Chief Architect of Oracle Tuxedo

• How manage the Tuxedo to reconnect to base what database restart or failover to standby dataguard?

  Hi expert,

  My Tuxedo apps using simple to connect to the oracle database, do not use XA.

  All connect and disconnect statements written in code.

  In the situation, when the base data to restart or failover of dataguard standby database. I have to restart all the servers in Tuxedo to reconnect to the Oracle server.

  If I want to reconnect to the database in the application code. I need to know all the exception of disconnection and catch.

  ORA-00028, ORA-03135, ORA-01012 are all oracle error. perhaps than others, no list.

  Do you know how to enumerate all the exception?

  or is there a way to reconnect db connection all servers in tuxedos at the request?

  Thank you in advance,

  Chao

  Hi Chao,

  The answer depends on the platform and version of Tuxedo.  On Oracle Engineered Systems with Tuxedo 12.1.3, you can make use of our new RAC are supported features to handle this in a transparent way, in addition to getting better performance if you use RAC.  New support includes support for FAN so connections can be switched forwards an instance goes down for maintenance.

  For all other environments, I would say looking at TAF (application transparent failover).  TAF should be able to reconnect transparent to another instance or database dataguard.

  Kind regards

  Todd little

  Chief Architect of Oracle Tuxedo

• Tuxedo 12.1.3 Linux - is it possible to disable the LLE warning messages in ULOG?

  There are many lots of warning messages such as the ones below ULOG file, and is it possible to turn it off? Thank you.

  100244.storesrv! GWTDOMAIN.25052.3023772576.0: WARNING: LLE discovery Configuration! Note that ISLAND has been deprecated. You should switch to SSL for secure network links.

  103202.storesrv! WSH.25270.3077255776.0: WARNING: LLE discovery Configuration! Note that ISLAND has been deprecated. You should switch to SSL for secure network links.

  You can export LLE_DEPRECATION_WARN_LEVEL = NONE to disable the warning message.  Settting LLE_DEPRECATION_WARN_LEVEL = ONCE will cause the message to be registered only one time per process.

  For customers of the shaking, you can set tuxedo.jolt.LLEDeprecationWarnLevel = NONE or tuxedo.jolt.LLEDeprecationWarnLevel = OUNCE.

  Kind regards

  Ed

• Tuxedo client implementation

  We have a banking application on Tuxedo with 6000 services advertised through server of the MSSS.

  Our customers access through them through plain/sockets, TCP, without workstation components.

  To do this, we have developed a multithreaded bridge that accepts client connections and calls for theses services.

  the answer back into this Jack.

  My question is what would be the best way to call via a client native Tux Tuxedo services, considering that it could be thousands

  customers connected at the same time.

  If call us via tpcall theses services, we would have to have me 1000 active threads in this bridge and 1000 IPC queue, so it doesn't seem a good idea.

  We would like to have a configuration style wire services and the other thread reading replys, but we have not found a way to do.

  
  

  Thanks in advance.

  
  

  Dani
  

  Hi Dani,

  The /WS way works, it's that a /WS client connects to a listener of WSL or workstation.  The listener then hands the connection to one of the many managers WSH or workstation that continue to process applications for the client to run.  A single WSL can support several WSH process and each process WSH can manage many clients.  The WSH accepts requests from the network and immediately makes an asynchronous call to the service requested by the remote client.  So to answer your question, if there are 100 concurrent requests, they are queued on the queue or queues associated with the requested service.  So if you have a single MSSS, then all 100 applications would be enrolled in the defined MSSS.

  In addition, please note that it is recommended that a set of MSSS have a fairly limited number of servers manage, as all the inactive servers throughout the queue will be awakened to try to process a request.  So if a lot of servers in the defined queue are inactive, they'll all be awakened and one of them will actually process the request.  The rest hangs again waiting for a message.  So under a lighter load, a lot of process context switches may be incurred.  That said, if the load is light, it cannot be important.  Also, it is often a good idea to have several sets of MSSS manages a set of services to provide more capacity in the queues.

  We have customers with 50,000 or more customers using /WS without problem, so I'm sure /WS can manage your number of clients.

  Kind regards

  Todd little

  Chief Architect of Oracle Tuxedo

• Transactions involving several RM in Tuxedo

  Hi Little Todd-Oracle.

  Assume a bank with server both B1 and B2 branches, each having its own database (Oracle) DB1 & DB2 (mysql).

  Take the B1 branch has an A1 account & branch a A2 B2.

  Suppose that a1 has 100 balance & account a2 has balance 0.

  At this point all plugged balance is 100.

  Assume that a transfer of 100 is launched from A1 to A2.

  Suppose that during this transfer operation was only half committed i.e. the balance was reduced on DB1, another customer (customer audit) is started for the balance of the whole Bank branches.

  Suppose the client verification transaction ends before the valid transfer transaction the increase in balance on DB2.

  The audit client would yield a ZERO balance which is incorrect.

  The pdf file attached shows the sequence diagram.

  My first question is

  Is there a way to Tuxedo to hold to start new operations (i.e. block to tpbegin/tx_begin calls) while a transaction is still committing (tpcommit is current)?

  My second question is

  Is it another way as a tuxedo configuration setting to fix this?

  My third question is

  This problem comes under the domain of a TM that Tuxedo?

  If it's not then how this issue is resolved in Tuxedo ATMI applications?

  Thanks in advance.

  Best regards

  Abbas

  Hi Abed,

  My understanding of isloation serializable is the RM will acquire both read and write locks.  Select statements would "for update" as part of the selection, which looks at the database to take an exclusive lock at this time there.  So in your sequence diagram, select statements of verification transaction will block until validations of transfer in each respective database transactions that select statements of will transfer transaction out exclusive locks.

  Kind regards

  Todd little

  Chief Architect of Oracle Tuxedo

• Question of compatibility/coexistence ORACLE TUXEDO

  Our existing PeopleSoft environment
  UNIX AIX 6.1

  PS HRMS tools Application 8.5 9.1

  PS Finance tools 8.51 Application 9.1

  We are about to upgrade only the HRMS

  PS HRMS tools 8.5 Application 9.1to PS
  Application tools 8.54 HCM 9.2

  Question-

  1 will be new ORACLE TUXEDO 12cR1 (12.1.1.0) work with PS Finance tools 8.51

  2. can you Oracle Tuxedo, Version (10.3.0.0, 64-bit, Patch level 081 - for end of PS) coexist with ORACLE TUXEDO 12cR1 (12.1.1.0,64 bits)?

  Hello

  For question 12cR1 PeopleSoft and Tuxedo, you will need to check with the PeopleSoft team as I do not know their version dependencies.

  When you ask can coexist Tuxedo 10 and 12, the answer is Yes, although I don't know exactly what you mean by coexist.  They can be in the same field of MP, or in distinct areas linked through the gateway of the field.  If they are in the same domain, then the MASTER machine must be one who executes the later version of Tuxedo.

  Kind regards

  Todd little

  Chief Architect of Oracle Tuxedo

• TUXEDO C server using Oracle 11 g ProC receives ORA-01012 not connected by mistake on EXEC SQL PREPARE

  Porting of some former service C code for TUXEDO that used Informix to Oracle... a trial.

  Service logic uses dynamic SQL to SQL and pre-compiler instructions to then run the

  Statement and return to the client in the form of an XML doc.

  Port is done now and during the test initial (after you have configured the TUXCONFIG, environment, Oracle DB, etc) am receiving an Oracle ORA-01012 not connected when the TUXEDO service routine tries to prepare the SQL SELECT statement.

  The statement in question is a simple "SELECT * FROM EMP".

  The server is defined in a group belonging to a group that has an OPENINFO string that connects to the Oracle DB.  This seems to be the case I see the sqlplus using the view v$ session where the user sessions connect when servers of launch.

  No idea why the EXEC SQL PREPARE is causing the server to disconnect from the DB?

  THX.

  W. MacKenzie

  It was with the inclusion of the DB = orcl tag in my OPENINFO in the TUXCONFIG.  Remove that and specify the database instance in the envfile for the configuration.  Works now.

• Tuxedo 12 c upgrade, the communication was due by the customer

  Now, I'm trying to improve Tux from 8.1 to 12 c. After tmboot server, all right. However, when the client calls the service, the server process could not get the function parameter, and the parameter is null.  for example:

  Service:

  Login (char * Tin, short insizing, char * short * out);

  Tin has received is empty, but the service is called.

  Note: The tuxedo 8.1 and Tuxedo 12 c have been installed on the same machine at the same time.

  Are there any suggestions?

  Hello

  What exactly are you trying to do? you try to run the servers update on tux8.1 on 12 c runtime? If Yes, then try to recompile the

• Tuxedo of Oracle and Oracle Tuxedo message queue on a virtual machine.

  Hi friends.

  How is it going?

  A small question.

  So let's go live using Oracle Tuxedo 12.1.1.0 with binding distinguished Bulletin Board and Oracle Tuxedo Message Queue 12.1.1.0 on a Virtual Machine (VMWARE) running Oracle Linux 6.2. However, we want to know if there are recommendations or mishaps in which we face before running Oracle Tuxedo on a virtual machine?

  I mean, I wonder if I have to worry about kernel parameters, settings of virtual machine or any other thing that could ruin everything.

  Another question.

  Oracle also provides certification of VMS where Tuxedo Oracle would go on top of the?

  Todd little-Oracle

  Maurice G-Oracle

  Hi Bruno.

  I'm not sure what you mean with single Liaison Bulletin Board.  I guess you mean a cluster or the MP configuration?  And is it really a clustered or just a single machine of the MP configuration?

  About the configuration, you use Tuxedo services as well or just Tuxedo Message Queue?  The biggest problem with the configuration of the BONE is the IPC resources.  If you do a-c tmloadcf on your UBBCONFIG file, it will help you to determine the required minimum IPC resources.  In general, I suggest configuration much more resources than the minimum to allow for the changes to come and for some of the parameters for heavier loads.  In particular IPC message queue settings are strongly dependent on the load.  So make sure that the maximum message size and the size of the queue are big enough for your expected workload.  You can monitor the slot load using the ipcs command.

  We don't certify virtual machine environment, but support also a long time the VM vendor to ensure compatibility, obviously VMware and Oracle VM who both do.

  Kind regards

  Todd little

  Chief Architect of Oracle Tuxedo

• Q-Oracle/Tuxedo system alongside the version 6.0 or higher

  Hi Little Todd-Oracle how things are?

  My work team have two questions related to the queues in Oracle Tuxedo.

  our team wondered if Oracle Tuxedo/q system to 12.1.1.1 version can interoperate with Oracle Tuxedo/q system to version 6.0. We are in doubt if a Tuxedo domain to 12.1.1.1 version have access or a way to use the queues deployed in another area Tuxedo to version 6.00 or higher. If so? How does it work?

  Other questions are what concerns the advantages and disadvantages to have a queue by queue space or the queue of more than one in a single space in the queue? the reason why we ask, we realized that our client development environment and production environment are made slightly different. In the development environment, there is a space in the queue and the queues are in there but in the production environment has created a space of the queue for each queue.

  Could you provide some ideas of theses and expertise for us?

  Thank you so much once again.

  We hope that you do well.

  Best regards.

  Hello

  I'm fine, thanks for asking!

  About the interoperability/q, I know exactly what you are trying to accomplish.  If it is really several areas, then it should not be a problem.  / Q use the servers TMQUEUE access to the queues/q.  These TMQUEUE servers are accessed through a service name that is the same as the name of queue/q.  He tpenqueue() and tpdequeue() API just call a service under the name of the queue under the covers.  If you can bear/q on several areas important name space of expectation as a service name in the configuration of the domain gateway.  We support connections between the different versions of Tuxedo, it "should" work, which means that the customer or you need to test this first.  Make sense?

  Regarding the queues by queue space, I think it is largely a question of scalability.  Each queue has one or more servers TMQUEUE who manages the space in the queue including all queues.  So if you have a single space with 5 cocks in it and a single server TMQUEUE queue, you can manage maximum simultaneous operations for queues 1/q.  You had defined the 5 lines each in a separate queue space, then each would have its own server TMQUEUE which means you could service 5/waiting queue of requests simultaneously.

  I hope that helps!

  -tl

• R2 Oracle Tuxedo

  Hi people.

  My name is Bruno Taboada I found here to ask some questions.

  I am creating a sample project using Oracle Tuxedo Release 2, however, I have some question about it.

  First, I created a simple project to a queue and waiting and that it worked fine, but when I tried to test some examples of oracle documentation I realized the new version of oracle Tuxedo does contain some features such as: tpenqplus() but tpenqueue() one definition. So, with this in mind, I wonder if the 12cR2 Oracle Tuxedo (12.1.3) there is a queue of messages from Tuxedo Oracle? in the opposite case.

  How to install Oracle Tuxedo Message Queue (12.1.1.0) in 12cR2 Oracle Tuxedo (12.1.3)? or else

  Should I use Oracle Tuxedo 12cR1 (12.1.1.0) because it's already been perfectly integrated to other modules of Tuxedo oracle like salt, TSAM including OTMQ?

  Fact 12cR2 Oracle Tuxedo (12.1.3) along Oracle Tuxedo Message Queue (12.1.1.0) separately but taking part in the same area? in this case, it is recommended to be deployed as such? How does it work? I have no idea. any suspicion?

  Finally, Oracle goes to get out a built-in version of Oracle Tuxedo (12.1.3) 12cR2 with Oracle Tuxedo Message Queue? in the affirmative. When will it be?

  I hope that I was clear enough.

  Thanks in advance for all replies.

  Best regards.

  Todd little-Oracle

  Hi Bruno.

  Queue messages from Tuxedo is a product of queues advanced messages that combines reliability and transactional features of the Tuxedo/q with the rich capabilities of Oracle MessageQ of e-mail.  So, the answer is simple if/q will meet your needs in a Tuxedo application, use/q.  If you don't need all the features of tuxedo, but you need robust advanced messaging, use messages from Tuxedo queue.  If you need both, add Tuxedo queue of messages on Tuxedo.  So if you need things like notification of delivery, offline messaging, and other more advanced messaging facilities Tuxedo/q provides and if you still need a Tuxedo, add Tuxedo messages on Tuxedo queue.

  Kind regards

  Todd little

  Chief Architect of Oracle Tuxedo

• A string of data Java Tuxedo server sending thai lang but salt is?

  A string of data Java Tuxedo server sending thai lang but salt is?

  I am java code, read data in oracle 11 and send data to the salt

  but the thai lang data?

  I do. Thank you Todd bit in posting

  I do not know is a correct.

  I started java envelopment

  Export JAVA_TOOL_OPTIONS = ""-Dfile.encoding = UTF8 ' "

  Tuxedo Java Server can send data LANGUAGE THAI to the success of the customer.

• Range of ports Application Tuxedo

  Hi all

  Is it possible to restrict the tuxedo application to use a specified range of ports while it is & running (except JSL, WSL, GWTDOMAIN)?

  Question - the tux request arrives with random ports assigned to the application connection to the DB servers, who sometimes is of WSL, JSL, NWADDR of another application of Tuxedo who was expected to come later on the same box.

  I am looking for a way to limit the first application of tux to come within the port range specified for servers. So they do not overlap with other Tux (WSL, JSL, NWADDR).

  Thanks in advance.

  
  

  Hello

  You can avoid this problem by ensuring that the ports used by the different Tuxedo system servers (WSL, ISL, GWTDOMAIN, BRIDGE, etc.) out of the range of ephemeral ports for your operating system.  This will ensure the connection of client as in the database that use (ephemeral ports) ports of the source never comes into conflict with one of your server's ports.  In the above example, 12249 and 12251 ports are ephemeral ports, i.e., dynamically allocated ports by the operating system specifically for the initiated client connections source port.

  See this section to determine how to change the range of ephemeral ports for your operating system if you need to do.

  Kind regards

  Todd little

  Chief Architect of Oracle Tuxedo