Similar Questions

• Hello .i have two montors connected to my pc but it doesn't show that I have a

  Hello .i have two montors connected to my pc but it doesn't show that I have a

  Hello

  1. What is the brand and model of the computer?

  2. a computer can detect both monitors more early?

  I suggest you to refer to this article and check if that helps.

  Setup dual monitor: two screens are better than one: http://www.microsoft.com/athome/organization/twomonitors.aspx#fbid=pol8zDAfueP

  Solving the multiple monitor problems
  http://Windows.Microsoft.com/en-pH/Windows-Vista/troubleshoot-multiple-monitor-problems

  Refer.

  Set up multiple monitors: http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  I hope this helps.

• How to fix VMware View Server certificate revocation check connection error?

  Dear community,

  For about 2 weeks, I feel a revocation of the certificate check error in our environment Horizon see 6.2. The strange thing is that, within 12 hours about two (replication) connection servers and the vCenter Server / server of composer (on the same machine) are considered as having invalid certificates, even if, in fact, they are valid (CA certificates). We use no security servers.

  The view admin console shows the following for servers connection:

  The server certificate is not approved.

  The server certificate cannot be verified.

  For the vCenter, he said (that I have validated manually the certificate):

  No problems found.

  Certificate is not approved, but the thumbprint of the certificate is accepted.

  With the connection series on 'full', States that the login server logs for the vCenter server:

  TRACE (B 17-0 - 0E98) < VCHealthUpdate > [NativeKeyVault] validateCertificateChain response: {result = FAIL, EndEntityReasons = cantCheckRevoked, ChainReasons = invalid, SelfSigned = false, EndErrorCode = 16777280, EndInfoCode = 258, ChainErrorCode = 16777280, ChainInfoCode = 256, PolicyErrorCode =-2146885613}

  As far as I can see there no similar entries for login server certificates in the newspaper.

  At the moment I am under the environment with composer and vCenter certificates manually valid and invalid connection (red) server certificates (as view clients and browsers are not disabled).

  I already checked that I am able to do everything 'green' again via setting the registry key 'CertificateRevocationCheckType'2 (as described here Configure the server certificates certificate revocation check). This brings me to the conclusion that one of the intermediate certificates cannot be validated. So, I had the information a "version" of an intermediate (intermediate certification authority) certificate has been revoked. There seems to be no coincidence - like the time point is as well, but this particular version does not appear to be used in the servers of my connection.

  However, even with full logging enabled, I can't information which (intermediate) certificate cannot be validated and why. I expected to see something like 'OCSP verification' or 'check the CRL' but I can't find it in the newspapers. However, I noticed that one of the intermediate certificates lacked the OCSP URL (even if the field "Authority Information Access" existed). Of course I updated the certificate with a version that contains the OCSP URL, but it has not changed anything.

  In addition, I checked manually all of the certificates in the chain with openssl (for OCSP) and CRLs as well, but everything seems to be OK (all URLS are accessible and no opportunity of certificate has been revoked). Actually, I do not interpret the error as "that the connection to the server is an invalid certificate because it has been revoked", but "it cannot check if it has been revoked. The servers do not need a proxy and nothing configured, so (I checked the proxy settings system context, also).

  For now, the problem is not critical, such as 'red' status connection server has no effect on our customers and so I could turn off certificate revocation check (or switch to check that the certificate of the server (2)). But of course, I would really solve the problem.

  Is there someone who can give me a hint on what to check, for example, how do I know which certificate cannot be controlled and why? Someone had the same or a similar problem? Support VMware is working on the problem as well, but they seem don't know is not the problem, either.

  I appreciate the thoughts and responses! Thank you!

  Best regards

  Fabian

  Dear community,

  During this time, I was able to correct the error described at the beginning of this thread. Jump to the end to see what could probably help you...

  1. At first, I installed an additional standalone VMware View Server connection in order to check the following related certificates:
     1. VMware support always told me to renew my certificates because they "were not valid" etc. - even if in fact they were (like external URL calls and attested manual verification and tests).
     2. That's why I created new additional certificates for the login server and configured to include the vCenter even as my production environment - only difference was I didn't inlcude the composer who runs the server vCenter himself.
     3. The result was that the server was "green" including both the vCenter Server certificate which could be 'not reliable' by the environment of production - strange, huh?
  2. After I reset the additional server to a turned wink where connection to the server was not yet installed (before that, I uninstalled the connection to the server in case there is information in vCenter thereon) and reinstalled as a replica of the production environment server. Somehow I expected this, but still quite strange the vCenter Server (and composer) now again was considered "invalid", even if the certificate of the server connection itself considered still valid and green. For test purposes, so I put certifice revocation checking on '2' (only one server certificate check) - but only on the 'old' production servers' and 'magical' everything has been considered valid. So as I see it, there seems to be some sort of information stored on the 'old' connection servers that makes them believe that invalid certificates and that the information is replicated on the third server unless I lower the revocation of the certificate controls on these servers. Altervative explanation could be that VMware View does not accept certificates with aliases that do not include the 'real' server name - that is / was in fact certificates the old servers connection. The new server certificate connection included the real name and the alias. I understand if this is the case, but then I expect that it be documented somewhere (I have not found this information) and also wouldn't understand why it worked without problem for several years before.
  3. After finding that out, I created new certificates for the 'old' connection servers, including aliases and real names and replaced the certificate on one of the servers (and restarted the login server) - only a few successfully. Once I put the revocation checking on '4' again on this server, the login server certificate was still considered valid, but not the vCenter and certificate of composer.
  4. Now, I've uninstalled the old login server (removed from the view) and reinstalled completely (including an update of the 2008 R2 2012 R2 OS) and after I have it reintegrated into the environment, everything remained green - as long I have will activate revocation checking on the second login server "old." This is why I did the same with this (completely reinstalled and reinstated it) and now everything is green with the revocation checking enabled on all replicas of server connection.
  5. The next step I uninstall the additional replica because I created only for troubleshooting purposes.

  So what will no doubt help in similar cases:

  • Reinstall the servers of connection one by one, including:
  • Uninstalling html access (if used), uninstall the login server to view, uninstall 'VMware' AD LDS Instance.
  • Removal of the connection to the server of replication group: run "s - r s uninstalled_ vdmadmin.exeservername" on one of the servers connection remaining.
  • Reinstall/Update OS (may not be necessary, but I did not test that)
  • Reininstall, return to the login server replica. If you used the certificates which included only the alias of the server I recommend you to create new ones, including the name of the server as well, but maybe it's not necessary as well. If you want to keep the certificates which only inlcude the alias it will be necessary to install this certificate after the first replication of the servers (see below).

  My question for technicians of VMware/developers: It is supported to use certificates include only the server alias. Otherwise why it worked before and where is it documented? Where are certificate cached information so that simply replace the certificate was only some, and not a complete success (see above). FYI - when I paired initially replicas that I had to install the CA (including only the pseudonym) after the first replication - now with certificates (including the server name and the alias), I could install the certificate before you replicate (= the login server installation).

• How to scan a document HP MFP127fn for my Ipad Air2 (the two are connected to my home network)

  Hi, how to scan a document HP MFP127fn for my Ipad Air2?

  The two are connected to my home network - the HP printer is connected by ethernet cable, and the Air2 Ipad connected by WiFi.

  I can print from the Ipad to the printer but cannot scan.

  The printer is properly connected (IE, it scans to another laptop (windows 7) without problems)

  Hi @regtown,

  My bad

  Looks like you won't be able to scan to PC or Mac with this printer. HP ePrint app is certainly compatible via iOS for printing, but it won't help you analyze for iPad.

  Kind regards

• not connected to the internet. Checked, connections w / wireless router. Everything looks ok. still no signal

  All of a sudden not connected to the internet. Checked, connections w / wireless router. Everything looks ok. still no signal.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Refer to the following articles. The steps of troubleshooting in these articles may help you resolve this problem.
  How to troubleshoot possible causes of Internet connection problems in Windows XP
  http://support.Microsoft.com/kb/314095
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

• Is it possible to have two mice connected at the same time?

  Hello. I have a gamer mouse, and I am pretty tired of changing the battery every now and then. So I was wondering if I could connect a wired mouse, I could use on the desktop, while my current mouse is always connected - for when I want to do some gaming. Windows Vista will allow that I have two mice connected at the same time?

  Hello

  You can connect two mice of universal Bus controller to the computer, but it goes to show that a single pointer.

• Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

  Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

  I just installed a Belkin modem-router - which went well. Can I connect WiFi gadgets etc. I can also connect to the internet via a network cable to my pc. I also installed a belkin usb wireless adapter and in Device Manager, says it is enabled and works.

  My problem is, I have no way of choice get a WiFi PC to display in the list (from the notification area) and cannot get the pc to give me options to create a wi - fi connection. The more I get to try to do that is "unexpected error"!

  If someone could help on this - I would be very grateful

  Good news - update of my ongoing saga with this Belkin modem/router.

  Got the pc to see wi - fi now. It turned out to be the Zone Alarm! As the router has a firewall, I uninstalled Zone Alarm completely. Also, I went into the properties of belkin usb and checked it was the most recent drivers, it does not so I installed them.

  So far so good

  Thanks for the help

  TREV Smith

• Unable to connect to the netgear router, it says failed to connect check connection

  Original title: netgear router

  Im trying to connect to my netgear router a TI repeat check connection failed to connect, but I can go on the internet. He began to do after I changed the channel on the router one moment I can reconnect you to fix. or go to the web page on the internet to solve if someone could help me that would be great.

  Hello

  1. What is the model No. the Netgear router?
  2 have you tried to login using the different browser and check?

  Check out the following link and check if you can access the router page.

  
  

  If you are unable to log on to your router

  http://KB.NETGEAR.com/app/answers/detail/A_ID/1097/~/if-you-cannot-log-on-to-your-router

  Alternatively, you can contact Netgear support for more details:

  http://forum1.NETGEAR.com/

  If you have any other questions, answer here and we will be happy to help you.

• Communication error has occurred during the last request please check connection.

  I get this error, Communication error occurred during the last request please check connection.

  Request failed with the following error message:

  301 moved permanently

  Nginx

  --.

  You want to start the last request?

  Original title: Communication Error Message

• Two internet connection on the same PC (WiFi and ethernet)

  I have windows 8.  I have two internet connections. A cable (wired) and another in the microwave (wifi).  Normally isn't a problem because desktop computers are on the cable connections and the TV, laptops and other toys are on wifi.

  But sometimes I want to use two connections on a PC, like download a large file and stream and watch the Broncos game at the same time. I want to use Ethernet as a main and did use WiFi when Ethernet is too busy. I can't understand how to do this.  Anyone know?

  Hi Gerard,.

  You can activate the Wifi and cable connected at the same time, but you can use the Internet from one of them. The computer will prefer the cable if the cable is connected.

  If both are capable of providing Internet access, computer will prefer the wired (Ethernet) network to access the Internet (and not use the Wifi network to access the Internet).

  The advantage of using two connections is to get Internet access without interruption when a connection does not work.

  I hope this helps! Let us know if you have other problems with Windows in the future.

• You can have two printers connected to a computer

  You can have two printers connected to a computer

  Yes you can have
  What is the connection method you use (usb or wireless)
  response with the models of printers

• When I click on to develop, a blue rectangle appears, with two lines connecting opposite angles.  I was able to get a picture in this window.  Can anyone help?

  When I click on to develop, a blue rectangle appears, with two lines connecting opposite angles.  I was able to get a picture in this window.  Can anyone help?

  Hello

  Please open Lightroom and click on Preferences.

  Once the preferences window opens, go to the performance tab, and please make sure 'Use graphics processor' is unchecked.

  After unchecking the option restart Lightroom, and it should deal with the issue.

  Please let me know if it helps.

  Kind regards

  Tanuj

• FMS auto trigger/check connection for clients

  Hello:

  This is my second request since the last time I had a huge help shape SE_0208, thanks man, forum thanks!

  I use FMS accept a stream RTMP of Wowza and played by Flash player, measures such as:

  1 Wowza publish rtmp streams. (very stable can be read by Flash 7 * 24 hours readers.)

  2. order to WHAT FMS accepts the rtmp stream:

  a. create the folder for the application named "Live2".
  b. to copy all the files form install dir\samples\applications\live
  c. conclusion main.asc Server codes

  var nc;

  var myStream;

  application.onAppStart = function() {}

  NC = new NetConnection();

  myStream = Stream.get ("foo");
  

  nc.onStatus = {function (info)}

  If (info.code == "NetConnection.Connect.Success") {}

  myStream.play("livestream",-1,-1,true,nc);
  

  }

  }

  NC. Connect ("rtmp://www.remotertmpserver.com:1935/live"); ")
  

  }

  3 reload the application, FMS can publish correctly.

  Problem is that FMS publishing always goes down, clients connected through LAN in Giga speed, stream rtmp Wowza output is very stable and

  can be read by Flash 7 * 24 hours readers. "Need one thing to do is click the button:" reload this application "in the fms_admin

  Console, then everything will be ok, FMS can resume for the publication.

  Guys, I have a lot of thing to do and can not affecting to the fort of the FMS server all day to watch.
  Anyway I do for FMS auto trigger/check connection for clients instead of manual by clicking on "Reload this application?"

  Thanks

  Hello

  I don't have the problem. But will give it a try.

  You have 'live' application in "live2" wowza and application in law FMS?

  1. is your server, wowza ceases publication but the live connection of live2 app is still preserved? Then at the start of the Publisher publishing the stream to wowza, live2 Subscriber will get the stream, until then live2 Subscriber will be in standby mode.

  2. the link between wowza and fms is broken? You can then initiates the connection once more once the connection is interrupted. Pls change the code to live2 as...

  application.onAppStart = function() {}

  NC = new NetConnection();

  myStream = Stream.get ("foo");

  nc.onStatus = {function (info)}

  If (info.code == "NetConnection.Connect.Success") {}

  myStream.play("livestream",-1,-1,true,nc);

  }

  Else if (info.code == "NetConnection.Connect.Closed") {}

  NC. Connect ("rtmp://www.remotertmpserver.com:1935/live"); ")

  }

  }

  NC. Connect ("rtmp://www.remotertmpserver.com:1935/live"); ")

  }

  Let me know if this this is not the case

  Kind regards

  Janaki L

• Two computers connected to the same account sync will not sync-ing

  I have two computers and an android device. I have set up A computer with sync, and it connects to a device and a virtual machine running in the computer, without any problem. I have another device that is not synchronized with them. It seems to be loged on the same account of Firefox. If I click Synchronize under preferences tab, all the options are checked and the account name is displayed. However, neither the favorite nor other data seem to be in sync to the device. Any thoughts?

  Hi ohnoplus,
  Thank you for your question. I'd be happy to help you explore this question with you. Here are a few troubleshooting steps that we can take:

  1. Please make sure that the version of the browser on Android is superior or 29.
  2. Please check in the accounts that there is no (obsolete) account.
  3. Please also try to remove the account, add once more
  4. Please, I beg you, then take a test and add a new bookmark, password or something on behalf of the Fund. Click on "Synchronize now".
  5. Set the account and synchronize it manually in the menu account on the mobile device.

  Note it may take a long time to synchronize on the first time, but please post back with the results and if there are errors, then, we can allow error logs.

• Two internet connections - that I don't want.

  I have Windows XP and a Belkin N Wireless Modem Router.  I seem to have set up two wireless network connections - "Nina", which is the right one and another called "Nina 2".  I do not remember to do this last, but it keeps appearing with the lower right icon that indicates a connection or other on my laptop and netbook.  'Nina 2' is not working properly and I want to get rid of him and just keep the 'Nina' reliable.  How can I do this?   I tried to look at my internet connections, but only 'Nina' appears.  Honestly, I can't think how "Nina 2" arrived there and just want to get rid of it because it interferes with my getting on the internet with my laptop and netbooks.  Help!

  Thank you.

  Ninaanne

  Hi Ninaanne,

  The configuration of the router? You have several THAT SSID configured on the router?

  Before checking the router, try click on start-> Control Panel-> network connection-> manage wireless-> and in the list that you don't want to delete. If you delete the name of the list, you can still get Nina2 listed in the Wi - Fi connection but do not connect automatically.

  I think its something in the router.

  I hope this helps.