Two monitors with a view 4.0 using PCoIP on ESX 3.5 hosts (4 VM version)

Similar Questions

• Two monitors with computer desktop Slimline?

  Hello

  I want to set up two monitors with my HP Slimline.  Is this possible?  I know I have to change the graphics card to accommodate two cords.

  Slimline s5310f

  64 bit

  NVIDIA GeForce 6150SE nForce 430

  LG E2360V LED monitor

  Hello

  You have options:

  1. install a video card that supports two monitors. -> the best performance option

  2. use a video USB adapter/converter.   -> What are your needs of video connection? VGA, DVI orHDMI

  3. use a USB attachable monitor such as this AOC 16 "monitor.

  Option #1.

  Look here in HP Partsurfer for video cards that are used in the new Slimline models with a 220 Watt power supply.  These cards have been made specifically for the HP Slimline PC with a 220 watt power supply.

• T5565 two monitors with RDP

  I use light customer T5565 for access to the server terminal server. I use image Thinpro T6X43202 Rev 1 (June 6, 2013). When we connect with two monitors Office spans both screens, as if it were a single monitor. It is a big problem because staff can maximize windows without that it spans both screens. Is there a fix out there for this. When I connect with two monitors with a computer dekstop both monitors are working fine. I read forums where people run linux commands to install Freerdp to work around this problem, but I can already see the FreeRDP on the thin client. I want to get a standardized solution to do this, not a single solution not supported. If anyone can help? Thank you!

  It is a forum for users of peer-to-peer supported for class for the HP consumer products. HP maintains no official presence in this forum. It is unlikely that HP will respond in an official capacity. Response of an employee of HP represents his own opinion and not that of HP.

  HP t5565 Thin Client is a class computer business and as such, your questions can better serve in the HP Business Support Forum.

  Please see HP Business Support Center - get help from HP to contact HP directly with your support questions.

  Please click the White Star of KUDOS to show your appreciation

• Two monitors with x 200 and docking station

  Hello

  Is it possible to use two monitors with my x 200? I use a docking station that has 1 VGA out. When I plug a second monitor into the VGA output on the laptop, the screen adjusts a car but remains empty.

  Any help appreciated

  Concerning

  Andrew.

  There is also a displayport on the ban, so you can use a dvi DisplayPort converter / for the second monitor.

• HOW TO USE TWO MONITORS WITH MY PRO TOUR

  Have a medium apple 2012 pro tour with ATI Radeon HD 5770 1024 MB graphics card. OS10.11.3 do - what I have to do to add another monitor. Using Quicken, I am frustrated by credit cards, bank accounts and source viewing .pages documents.

  MAc 577 has two mini didsplayport and a dual link DVI output = element. Just connect two monitors to the card.

  See also:

  OS x: using several screens in Mavericks - Apple Support

  The foregoing applies to other OS x versions too

• Use multiple monitors with Client view

  Hello

  Quick question regarding the use of multiple monitors when connecting via the customer to view. I have many users using a monitor with a zero multi configuration client and everything works as expected. When connecting via customer discovered however the Office extends on (i.e. Outlook stretches on left and right screens) two monitors instead of 'renewal' (i.e. the prospects on the left monitor, acrobat opens on the right). Everyone is aware of a fix for this?

  Thanks in advance.

  See you soon.

  Are you sure that you are using PCoIP?  View what version do you use?  Which version of the Client that you are using a view?

  Gunnar

• Desktop HP Pavilion 550-A17C: two monitors with desktop HP Pavilion 550-A17C? (Graphics, AMD Radeon R5)

  Hello. My computer is a HP Pavilion Desktop 550 - A17C with AMD Radeon R5 (integrated) graphics card. Can he take charge of two monitors? I did everything I can think of, including searching the Internet for a number of hours for solutions. For the life of me I can't get the computer to detect the second monitor, when I have two connected monitors.

  I connect the main monitor with a VGA cable and the second with a DVI cable. The computer only has a VGA connector and a DVI connector. There is no HDMI port (serioulsly and I bought this computer as three months previously, as a refurb...) (Lol).

  What I want to do, is extend the display. My hardware is unable to conduct two screens? A USB video adapter solve the problem?

  Thank you

  @AFL2016, welcome to the forum.

  First of all, make sure that you use a DVI - D connector:

  

  This is important.

  Here's a guide to help you with the installation.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Two monitors with Qosmio X 505 - Q890

  I'm considering buying a Qosmio X 505 - Q890, but it must support two monitors.

  Is this possible with this machine? I guess if it's possible, it should be an HDMI and a VGA.

  Thank you.

  As far as I know that there is no support for dual monitors. You can only use a port. Connected TV/monitor will be detected automatically.

  What you can also do is visit Toshiba US page under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp for assistance
  You will find info on this model of mobile al. Also download s manual and check what is described here.

• Two monitors with different offices

  I use VM Fusion (4) for Mac and Win 7 OS. I would like to have the same office on my two monitors. How to do this. It's very disconcerting to open two offices at the same time. Thanks for responding.

  FC

  Do you mean spend your Win 7 full screen, and to what extent the Win 7 the second monitor, if yes, go view-> use title bar all displays in mode full-screen.

• configuration of two monitors with 2 different screens

  I have two monitors, I try to set up 2 different screens?

  Hello

  Thank you for writing to Microsoft Communities. I understand that you try to configure both monitors.

  Please go ahead and follow the steps mentioned below and later a update on the State of the question.

  Move windows between multiple monitors: http://windows.microsoft.com/en-US/windows7/Move-windows-between-multiple-monitors

  Work and play better with multiple monitors: http://windows.microsoft.com/en-US/windows7/work-and-play-better-with-multiple-monitors

  http://Windows.Microsoft.com/en-us/Windows7/manage-multiple-Windows

  http://support.Microsoft.com/kb/976064

  http://www.Microsoft.com/athome/organization/twomonitors.aspx

  Future prospects for more questions

• 230 X: the display on two monitors with lid closed?

  My current setup:

  • ThinkPad x 230
  • Docking station series 3 ban
  • EVGA UV Plus + 39 vga box to allow setting up dual monitor

  I have the following problem, I don't know if they are related:

  First question:

  • When I close the lid on my laptop, it stops. I expect it would display Desktop on my two monitors.

  Second question:

  If I'm away from my computer, my screen become white.

  • I tried pressing the keys on my keyboard to wake up my system [does not]
  • I tried to open the lid: computer laptop screen is blank
  • So I have to shut down my computer, open the cover of the screen, and then close the lid and they press the button on my docking station to display Desktop to my two monitors?

  Do you know what causes this problem?

  Moderator edit: matched subject to content.

  1. disable stop option for "lid closed" settings within the app Lenovo Power Manager (Group of event parameters).
  2 could you be more clear. Please? Your laptop is going to sleep several minutes later (5? 15? same?) we let him? And you can not wake him normally?

• How to use two monitors with Pre10

  I always use Pre3 on my XP machine and I drag CAD of the monitor Panel to monitor 1 to monitor 2 but that doesn't work in Pre10. It is not the monitor in Pre10 Panel can be moved independently of the rest of the screen. I can drag the entire program in my other monitor, but still not get the monitor Panel to separate. It would seem that if it was possible in the Pre3, it should be possible in Pre10.

  Thank you

  To remove panels, you must first go to the window menu and select show-host headers, and then drag free panels of these headers on the top of each Panel.

  The versatile tasks Panel is the only Panel that don't désamarrera interface.

• Two monitors with Windows 7

  I hope someone can give me an answer. I just bought a 2nd monitor to connect to a Dell laptop with an HDMI cable. The original monitor is connected by VGA cable. At this point, no signal shows on the 2nd monitor. What can I try?

  Check the specifications of your laptop.

  The integrated graphics will be able to drive an external monitor. You can use VGA or HDMI, but not both simultaneously.

• Two issues with LR that I could use help with

  I'm on my first day of using LR and there are two questions that I could use help with:

  1. I can't replace the files when you move one place to the other.  I have a working directory, and now that I'm done I want to move the files finish to my disk archive.  Raw files are already on the archives, so when I try to move them I get an error that the files already exist.  How can I force a crash of in LR?

  2. I have directories where there are pictures which are a set of raw, psd and jpg files.  When I open the directory the raw and jpg are combined so that only the raw and psd files are appearing as separate files.  I would like to keep the jpg file in a separate so file and do not appear as part of the raw file.  When I open the directory in windows Explorer, they appear as three separate files.

  I appreciate your time to help me with these two fundamental questions.

  1. I'm not sure what the problem is here. What operating system do you use?

  2. in your Lightroom preferences, there is an option to treat JPEG files next to raw as separate files images. You must make sure that the option is checked. After you have done this, I think that you must synchronize the folder for the images that you have already imported. Next time you import JPEG files will be displayed separately.

• How to set up two monitors with screen LCD and HDTV on computer that is running Windows 7

  Issues of identity and position monitor

  I use a LCD and an HD TV on my computer. I have HDTV mounted to my left on the wall in my room and the LCD is on my desk in front of me. I have my monitor set as my main screen and HDTV as secondary. Windows identifies the HDTV as monitor 1 and my screen LCD 2. After starting the computer they work very well as they should. My problem is during the boot process. When the computer starts, it displays only the boot screen/POST on monitor 1 (HDTV) but not my main screen #2 (LCD). This is a problem when I don't have my HDTV now, I don't see the MESSAGE options. I don't want to always have my HDTV and crane my neck every time I need to change the BIOS settings or use the MESSAGE options. Is there any solution for this?

  Chris

  AMD Penom II x 4 940

  Windows 7 64 bit

  Gigabyte GA-MA770-UD3

  NVIDIA GeForce GTX 275

  DCLCD 19 "VGA monitor

  VIZIO HDTV 32 '' (hdmi) "

  Hi Darth Polizei,

  I hope that's not redundant but did you try to set your monitor 19 "as the main display?

  1. In the screen resolution window, you click the icon of the monitor that represents the secondary monitor.
  2. You click to select the "Make my main screen" check box, and then click OK.
  3. You log out of the computer.
  4. You log on to the computer.

  Please let us know.

  Thank you!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think