Two problems of thinreg against the .msi deployment

Similar Questions

• Two problems. New installation. (Question loading and certificate of the page).

  So, I have recently reinstalled FF, thinking I'd give it a try. And I immediately ran into two problems.

  The first of them being that facebook does not seem to work correctly at all. Attached image.
  The second is that I get a message of invalid certificate on Web sites, that I used most often. For example, I'll use the site Web of Halo Waypoint. Ran and owned by Microsoft/343 Industries. I do not get an option "Add expection" on these pages. Also attached image.

  Hi, in case, you're an avast user, please try to disable https scanning in avast:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok.

  http://www.gHacks.NET/2014/10/31/avasts-HTTPS-scanning-interferes-with-Firefox-and-other-programs/

• 30.0 Firefox is so slow since updated. IE & Chrome not having problems loading pages, showing the blank pages, need two or more tests to open Web pages.

  30.0 Firefox is so slow since updated. IE & Chrome not having problems loading pages, showing the blank pages, need two or more tests to open Web pages. It seems to have something to do with the Visual data on the pages. My MSN homepage gets old and dies every time I open the page after the re-opening and closing of firefox. It takes forever! What is a memory drain? Each open page in a new session of firefox suffer the same fate.

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > General.
  Find and stop using hardware acceleration.

  Dig safe web sites and see if there is still a problem. Then restart.

• I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store

  I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store and support too, but it did not help. I would like you help me solve this problem.

  Thank you.

  Kelly

  Your machine is still under warranty, so you should take it to your local Apple store for repairs. Function late in January, you bought it, you still have phone without support. If you can't find any help on the Apple Store, then I don't know what you expect to find here. We have no way to check for problems you have described or any additional hardware, etc.

• Two problems: 1: there is no Mozilla or Firefox folder in the start menu;. 2: when I said 4 FF to return by default, I had all the features of FF 3 instead. I reinstalled the browser, but that has not helped. Advice would be much appreciated.

  Two problems:

  1. when I said Firefox 4 to return to the default toolbar, he returned to v. 3. I reinstalled v. 4, but that did not help.

  2. I tried to open it in safe mode and discovered that there is no Mozilla or Firefox folder in my Start menu.

  I'm the home runnint Windows 7, 64-bit.

  1.
  
  The orange Firefox button appears when the menu bar is hidden. Turn off Bar Menu item in view > toolbars or from the context menu for toolbars.

  2.
  
  You can open the Firefox 4.0 SafeMode pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  
  Or use the Help menu option, click restart with the disabled... modules while Firefox is running.
  
  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox to open it again.

• Toshiba Satellite laptop computer - a letter from the product key rubs against the broad and all re-installed Vista OS because of system problems

  I had to reinstall vista OS because of problems in system, borrowed friends Vista Premium cd bc my laptop didn't come with a cd of Vista, now my system properties shows that I need to activate my windows, but when I looked at my product key at the bottom of my laptop letters isn't quite clear & seems to have rubbed off the cause so no chance to enter the product key & get the message error product key is not valid - at the time of purchase, no cd not supplied with my Toshiba Satellite and do not know, I registered my product key in the beginning, but no problems until now. you don't know why it is past and don't know how to correct it or unclear letter?

  * original title - product key entered is already in use - Toshiba Satellite laptop computer - a letter from the product key rubs against the broad and all re-installed Vista OS due to system problems *.

  Hi jsserrano68,

  Read the following article about the product keys for Windows:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/outFrm.jsp?ofId=AskIris&SearchString=product+key+Vista

  In addition, if you need to contact Toshiba support:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact&PF=true

  Thank you

  Deb

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Two problems in the use of LKM file to sql

  Hi all
  "I met two problems during use' LKM sql file" to load the data from the CSV to oracle db. Please try to help me, thank you very much!
  
  my environment:
  OS: win 7
  ODI version: 11g
  
  The 1st condition is: in step 10 of the session to execute, a table called "." SNP_CHECK_TAB"which could not be created in oracle will be created!
  If I change to SNP_CHECK_TABLE, the stage will pass...
  Why appoint the table like that?
  
  create the table. SNP_CHECK_TAB
  (
  CATALOG_NAME VARCHAR2 (100 CHAR) NULL,
  SCHEMA_NAME VARCHAR2 (100 CHAR) NULL,
  RESOURCE_NAME VARCHAR2 (100 CHAR) NULL,
  FULL_RES_NAME VARCHAR2 (100 CHAR) NULL,
  ERR_TYPE VARCHAR2 (1 CAR) NULL,
  ERR_MESS VARCHAR2 (250 CHAR) NULL,
  CHECK_DATE DATE NULL,.
  ORIGINAL VARCHAR2 (100 CHAR) NULL,
  CONS_NAME VARCHAR2 (35 CHAR) NULL,
  CONS_TYPE VARCHAR2 (2 CHAR) NULL,
  ERR_COUNT NUMBER (10) NULL
  )
  
  The 2nd condition is: I want to filter certain name in the source table and the filter string is ' BRE.name! ='some_value ""»
  When I clicked on the button "Test query", indicates the following error message: "error during execution of invalid request format description.
  It works well when the db of the source is oracle, why not drop? Is there any format for the filter string in the file? I don't think so...
  
  
  Jun

  The 1st issue is coming because in topology---> your---> work Server schema is not specified.

  Can you elaborate on 2nd question?

• Problem with the images against the copy protection.

  Woah, taken on... I have just returned from a shoot and checked my site to see (I don't know why I come to realize this) none of my 200 + images in my galleries are protected against the download! I'm so used to the script, I had im my old site, I took it for granted. So my question is can I use the script in the head to avoid just below by clicking on or there at - it a simpler way to protect my images (albeit light protection)?

  Banks,

  Ed

  < script language = "JavaScript" type = "text/javascript" >

  <!--

  If (document.all) {}

  }

  else if (document.getElementById) {}

  document.captureEvents (Event.MOUSEDOWN)

  }

  Else if (document.layers) {}

  document.captureEvents (Event.MOUSEDOWN)

  }

  document. OnMouseDown = mousedown_handler

  function mousedown_handler (mouse_event) {}

  This is the message that is displayed

  var no_right_click = ' this material is copyright Rogers photography! Please contact us with your requests. »

  If (document.all) {}

  Probably Internet Explorer 4 and later versions

  If (event.button == 2 | event.button == 3) {}

  Alert (no_right_click)

  return false

  }

  }

  else if (document.getElementById) {}

  Probably of Netscape 6 and later versions

  If (mouse_event.which == 3) {}

  Alert (no_right_click)

  return false

  }

  }

  Else if (document.layers) {}

  Probably of Netscape 4

  If (mouse_event.which == 3) {}

  Alert (no_right_click)

  return false

  }

  }

  }

  ->

  < /script >

  I have inserted the script and it does not work. So I'll simply make room incase anyone wants to use it.

• "We have problems to connect to the download server.

  I tried to download any type of update of Skype from my Skype upward and itself deleted my Windows 10 for no reason. Whenever I have try and install the program Skype, after clicking on the first two buttons of installation for preparation, I get this message: 'we have problems to connect to the download server. The only option is to 'download' again. And continues to be the same thing. What is happening and how to fix this?

  Try this download link (currently Skype version 7.16.32.102)

  http://www.Skype.com/go/getskype-MSI

• HPDM 4.6 SP4 cannot save the files deploy subtask

  Recently, when you create a new task to deploy a file and try saving it I get:

  "Cannot save the subtask to deploy files.

  If I create another type of task it saves without problem. The only time where there is a problem, is if I am trying to add files to my task. If I try to add a file to an existing template, I get the unable to merge the error of the model.

  I have checked the permissions in the main repository, run the test, all come back fine. I even tried manually adding files to the repository and that's ok too. I can't find something as interesting in the newspaper. I should mention that we did a database migration recently, but I test all features and managed to save a task of deployment without problem.

  Try to get out of the individual tasks that contains files (in this case the msi Hotkey filter) I get the following:

  2015-07-03 14:08:21 [error code: 5260288] [Module: MasterController] [category: input/output disc] 2015-07-03 14:08:21 [error details]:.\SyncTask.cpp@91: failed to sync files. .\port_layer\ftpclient\fileclient.cpp@816: failed to get the data from the file. .\port_layer\file_io\filefuncs.cpp@86: failed to get the data from the file : D:\HPDM/Repository/Files/ToDeploy\Hotkey filtre.\port_layer\file_io\filefuncs.cpp@84: the system cannot find the specified file.

  In the masterrepository log:

  2015-07-03 15:14:28 ERROR could not remove the package: Test. \port_layer\ftpclient\fileclient.cpp@235: has no file stat, RemoteDir: / files/repository/ToDeploy, name: Test.
  .\port_layer\ftpclient\fileclient.cpp@390: could not get the file stat, RemoteFile:\\10.7.1.29\HPDM$/Repository/Files/ToDeploy.
  .\port_layer\ftpclient\ShareFolderClient.cpp@424: has no file stat data.
  .\port_layer\file_io\filefuncs.cpp@86: failed to get the data from the file : \\10.7.1.29\HPDM$/Repository/Files/ToDeploy\Test
  .\port_layer\file_io\filefuncs.cpp@84: the system cannot find the specified file.

  2015-07-06 09:11:44 CTaskReceiverThread::recvTask() of ERROR: unable to receive data from ssl server.
  2015-07-06 09:11:44 CTaskReceiverThread::recvTask ERROR failed. Returns the value-1.
  2015-07-06 09:12:10 sendReoprt() of ERROR: unable to send data to the server.
  2015-07-06 09:12:10 CReportSenderThread ERROR::recvTask(): could not receive data from ssl server.
  2015-07-06 09:12:10 ERROR CReportSenderThread::recvTask failed. return value = - 1

  10.7.1.29 refers to a repository of the child, I have about 30 repositories of the child.

  I have not changed any configuration, I don't really understand how this happened, I can't even create my first Contact rules, scheduled tasks or create new tasks/templates. We are in the midst of a large-scale deployment so that any help ASAP that would be most appreciated!

  Thank you

  Luke

  This has been resolved with the help of Chen_HPDM by e-mail.

  We changed the console.conf to:

  HPDM. NEWSPAPER. LEVEL = DEBUG

  (console.conf can be found in C:\ProgramData\Hewlett-Packard\HP device Manager\Console\conf)

  I ran the task to deploy the files again and had the following in the log:

  2015 07-09 09:43:41 [WT-EventQueue-0] DEBUG Console - Request (20201): add templates

  2015-07-09 09:43:42 [WT-EventQueue-0] DEBUG Console - [TimeSpan] (20201): Add models [true]: 86

  2015-07-09 09:43:42 [WT-EventQueue-0] TemplateManager DEBUG - processAddTemplate: OS = HPWE8_64, name = New Test, category = files and the registry, status = transfer and tip =

  2015 07-09 09:43:42 [WT-EventQueue-0] DEBUG Console - Request (20202): update of model

  2015-07-09 09:43:42 [WT-EventQueue-0] DEBUG Console - [TimeSpan] (20202): update model [true]: 142

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files\ToDeploy\_Temp

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files\ToDeploy

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files\ToDeploy\_Temp

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files\ToDeploy

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp

  2015-07-09 09:43:45 [Thread-43] DEBUG MPFactory - Call TemplateMP.

  2015-07-09 09:43:45 [Thread-49] DEBUG TemplateManager - processAddTemplate: OS = HPWE8_64, name = New Test, category = files and the registry, status = transfer and tip =

  2015-07-09 09:43:45 [Thread-49] TemplateManager DEBUG - processUpdateTemplate OS = HPWE8_64, name = New Test, category = files and the registry, status = failure, tip =

  The Console could not delete a temporary file created previously called HPDM_Temp. I renamed the file and was able to create the task.

  I can't wait to find my question on the forums, and someone didn't post the solution so I hope this helps and thanks again Chen!

  Luke

• How can I fix the .msi file extension?

  Related to: Windows 8.1 how to define and restore file associations.

  A year or two before, I tried to open an .msi file in the Windows Explorer (on object for reasons that I don't care). Although I can use 'Open with' dialog box to specify "Windows Installer" as a temporary workaround, I'm having difficulty to change to open with the default Windows installation program. Here is what does not work:

  • In "default programs", Windows Installer is not listed.
  • In "set associations", .msi is not listed.
  • On the context menu of the .msi files, 'open with' is an option, not a submenu. However, in the 'Open with' dialog box "always use the selected program..." is gray.

  With the situation that I am, I think I have to change the registry to fix this file association. I am very familiar with the registry editor and have no problem with a fix in such a manner.

  See if this tutorial help

  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html

• ANyConnect Client certificate authentication and verify the Client against the Microsoft AD using DAP via LDAP domain membership

  Hello

  as described in the title one want to connect with AnyConnect Secure Mobility Client 3.0.2052 ASA 5540 Version 8.4 and licence Premium SSL.

  Customers using Maschine certificate to authenticate to ASA. It works very well.

  Now, I want to install a DAP to check the customer against the Microsoft AD using LDAP. I have configured the LDAP server in see ASA:

  AAA-Server LDAP protocol ldap

  AAA-Server LDAP (inside) host ldap.com

  LDAP-base-dn DC = x DC = x, DC = x DC = com

  LDAP-scope subtree

  LDAP-login-password *.

  LDAP-connection-dn *.

  microsoft server type

  I see that it works if I test via the testbotton server in ASDM and I also see in CLI "debugging ldap 255". But if I configure in DAP: AAA attribute ID:memberOf = Membre_domaine I can't see any request to the LDAP server as I try to connect with the Client und does not correspond to the DAP.

  No idea where the problem lies?

  Thanks in advance

  Hi Klaus,

  DAP will not make any call LDAP itself, it will only act based on the attributes received LDAP via the LDAP authentication or authorization.

  So you will need to enable the LDAP authorization in the tunnel - or connect to groups.

  Once you have, you can either use DAP or a map attribute LDAP for accept/deny access, see the example of these two methods.

  HTH

  Herbert

• Problem of reorganization of the tabs in groups under the tabs single parent

  I have an application built Apex 3.1 which began with a small number of pages using tabs in a single level. Over time, several new pages have been added and the tab bar is getting crowded. I want to rearrange the tabs in two levels.
  
  I was able to successfully create the new tabset, get all my pages organized as I wanted them and then attach the tabset to the application: However, when to access the single level of enforcement of the tabset - down, the level of detail - was never displayed on the page. This single line of tabs worked again - I could click it and the page has been posted, but it was really not very useful given that the top-level tabs were not displayed. After messing around with it for awhile I had to give up and restore the original, crowded tabset.
  
  Has anyone had - and resolved - this issue before? I recently installed Apex 4.0 so I will soon migrate my app and try again; However, I have no plan yet to deploy in production 4.0, so I would like to solve this problem in 3.1, if possible.
  
  TIA,
  Eric Shepherd

  Eric,

  Send me an email and I will reply back with a link to a sample applications up on apex.oracle.com, which illustrates the use of the single-level tabs and lists.

  Jeffry.Wells@doit. NH.gov

  Built two applications, one using the theme 1 (red) and the other using the Blue theme 13 (Classic). Red has problems right out of the box using the method above.

  Link to the screen shot using theme 1: http://www.screencast.com/users/jwellsnh/folders/Jing/media/b38c8daf-99f9-4af3-93ad-ae2b75a19092

  Link to the screen shot using the 13 theme: http://www.screencast.com/users/jwellsnh/folders/Jing/media/f667ab29-9372-4f02-91c0-81d41fe0fc40

  Jeff

  Published by: jwellsnh on November 2, 2010 14:15

• purchase through Apple against the provider?

  Are there advantages of purchasing an iPhone 7 by Apple against the purchase through my provider (Verizon)?

  I used to buy AT & T or Verizon Online because they have stores that can simplify making a return if there is a problem. No local Apple Store where I live.

• How I find myself with two passwords to iCloud for the same account?

  How I find myself with two passwords to iCloud for the same account?

  For security reasons, I only use iCloud for Contacts and "find my iPhone".

  Several months ago Apple forced me to change my password to iCloud.  So I did this.   In the last months, I used successfully the new password to 10 or 12 times when asked without problem.

  However, I received a notification of a software update for my Apple Watch. I did the update without problem. However, after completing the update my iPhone asked me to connect to my iCloud account. When I did this, she rejected my password. I made 4 attempts typing very slowly and with care for you sure I did it right.

  Then, operating under a hunch, I decided to enter my old password to iCloud. It worked?  I'm confused about this, any ideas would be appreciated.

  I had a similar problem last year. I had to call Apple. Contact is a bottom of this page.