Two routers on the same network wireless?

Similar Questions

• the Air iPad does not connect to a printer to air even if the two are on the same network

  DIIAP Air does not connect to air printer, even if the two are connected to the same network. Message "Air printer not found".

  Readhere: printing from your iPhone, iPad or iPod touch - Apple Support

• Connect 2 routers on the same network? !!

  Hello

  I can't get this to work...

  I have a modem connected to the ground floor for internet cable.

  I needed an extra blanket so I bought a linksys wrt120n to put on the floor.

  It is connected directly to the modem downstairs via ethernet.

  However I can't get them on the same network (or my clients at least)

  I gave the same SSID and tried various things, but when it is connected to the linksys, sometimes I don't see the pc down and sometimes I can't! ???

  Please, can someone give clear and easy to follow steps on how to get everything on the same network?

  Thank you...

  Here's how to connect several routers in your network. You need a LAN - LAN configuration so check all the computers together. If you use Internet-LAN, the network from the router won't be available outside of the unit.

• Two VLANs in the same network bubble?

  Hi all!

  I do not know very well of networking, and don't know my VMware network guy, so I hope that someone here might be able to answer my question. Thank you!

  I'm testing the conversion of some of our production servers. Since they have the same name, they are all in a bubble of network on the same host. So I have a vSwitch called "Bubble Network Test" which has several virtual machines, but who doesn't have an uplink (no associated physical map). So far, this has worked very well. So that users to test, I also have two XP machines to also live in this bubble. However, we will have performance issues. In our test of D/R one a few months ago, we found that the application performed very bad when the customer was in the same VLAN as the server; change the client to a VLAN different fixed performance.

  So, I would do it here in the hope that it will improve performance. However, I do not know how to do it. Can anyone offer any tips/advice on how to have more than one VLAN in the same network bubble? I have to make two vSwitches and then connect them somehow?

  Thank you!

  As long as you stay internal to the ESX Server then Yes you will need virtual switches - you will have then a virtual machine that will span two switches, acting as a router routing traffic between VLANS.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Need help to set up: 2 different wireless with SSID 2 routers on the same network

  Hi all:

  I read on the forum trying to find the answer to this question, but have not found a very clear answer that satisfies all my requirements autour.  An explanatiion more in depth.

  I have 1 IP coming via cable modem.  I want to configure two wireless routers (one secured with WPA-TKIP and a non-secure network - a 'guest' If you want to) each with different SSID.  The secure network would be for my server, PC home, webcams IP, DynDNS, update; While having an unsecured wireless router that friends and family can access.  Ideally, I don't want any person who accesses the router unsecured wireless to access my secure network.

  Is someone can you please tell me if this is possible.  I think that it is based on some posts, I've seen, but specific details about how to do this would be appreciated.  In addition, my DynDNS must always be able to be updated with the IP of my ISP so that I can access my server and webcams home.

  MATERIAL

  2 WRT54G

  1 EZXS55W

  1 WVC200

  1 WVC54GC

  (all my stuff - webcam, dyndns, server, etc. - working on my secure network.) I just need to add the non-secure network)

  I know it's a lot, but I'd appreciate any help.  Thank you.

  You must be connected to the modem router WRT54G main. Set up the network secure on the main router wireless. Connect all of your computers or wireless devices for the main secure wireless network.

  Consider that the IP address of the main router is 192.168.1.1.

  Now connect a single computer to Port 1 on the second router wireless.

  Open the second wireless router configuration page. Settings wireless SSID, unsecured.

  Change the IP address of the second router 192.168.2.1. Save the settings.

  Connect the cable from the Ethernet port on the main router to the Internet second port router wireless.

  The second power cycle wireless router.

  Now the host computers connected to the second network unsecured wireless Wireless will be able to access the Internet only. They will not be able to see the computers or devices connected to the first router.

• Rename more than one printer on the same network wireless

  I use a HP Officejet Pro 8500 a Premium. We have more than one printer in our office who will use the same WiFi.

  However, it is difficult for the end user to understand on which printer to use as they both are the same except for a random string at the end. We cannot find any rename them so that they can appear with a location. Is this possible?

  Note: I use Mac OS X (Lion) (Hello). I found the 'active' name, but this does not seem to post anywhere. I am limited to the web browser interface, because there is no full software for OS X Lion still.

  Thanks for the reply. This solution renames ONLY for the current user as this information is stored on the local computer.

  However, I found the solution!

  Via the Web Interface, go to the network and then select Hello in the menu on the right. You can then rename the printer to everything you love.

  While you're there, go to Internet Printing Protocol and change these settings for windows machines. Also, click the host name and change the host name so that it might be better in a windows workgroup.

• BEFSR81 with WRT54GS to the same network?

  I currently have a LinkSys BEFSR81 connected to a cable modem that I need at least 6 ports wired to my home network.  I also have a WRT54GS which is currently unused, but I want to add to the network so I can have both wireless connectivity.

  Assuming that it is possible, what is the best way to combine the two units in the same network?  The simply connectable WRT54GS downstream of the BEFSR81 via one of the ports open?  I guess I'll have to change the IP address of the wireless device for individually accessible for configuration, check status, etc.  All the other things I have to do?

  Please notify / thank you!

  I found the solution in a previous post, sort of.  Here's what worked for me:

  (1) connect direct PC to WRT54GS

  (2) turn off DHCP and change the WRT54GS IP to 192.168.1.2 (192.168.1.1 for the 'master' BEFSR81 vs).

  (3) save changes

  4) activate wireless, configure security, get access, etc. on the WRT54GS code

  (5) save changes

  (6) re - connect the PC to the original port BEFSR81

  (7) connect the ethernet on BEFSR81 port to a port ethernet on the WRT54GS (NOT the Internet port)

  (8) to enter the code in the WiFi device and make the connection...

• Two Macs can connect to a URL, another on the same network may not

  So far, I can connect this behavior to a unique URL only - but of course, it's an I need to get in order to save some software on this particular machine.

  I emptied the cache, flushed the DNS cache and checked that I use valid DNS servers. It isn't Safari, chrome this brings. Two Macs reached the URL without any problem, but this new model Mac Pro simply will not reach it and traceroute expires after a few jumps. All three machines are on the same network, all three use the same DNS servers. I rebooted several times.

  All three Mac running the latest El Capitan. The two reach the URL are a MacBook Pro and a Mac Mini Server.

  I'm puzzled.

  Please note that a traceroute on all three machines reveals the slowdown even at the same jump in the chain, but only the Mac Pro seems to have trouble with it.

• Two interfaces WAN ISP in the same network

  Hello world

  I am faced with a really simple but delicate scenario. My ISP gives me IP addresses public 2, both in the same network. They also gave me the default gateway which is of course in the same network too.

  I need two fully operational ip addresses, but I realized that I can't have two interfaces (routed interfaces) in the same network segment. I have just a single router (Cisco 2911). A friend told me that I might be able to set this up using VRF, but as far as I have read, there is no way to use VRF to achieve this.

  Is it possible to use two (or more) ip addresses to redirect traffic to the same default gateway in the same router?

  Thank you!

  Miguel

  Hi Miguel,.

  If you want just your 2911 have set up two public IP addresses, you can set one of them as secondary IP address. Suppose that 192.0.2.1/29 is your default gateway, and 192.0.2.2/29 and 192.0.2.3/29 are your IP addresses. So to have both configured, you'd:

  interface Gigabit0/0/0 ip address 192.0.2.2 255.255.255.248 ip address 192.0.2.3 255.255.255.248 secondary

  And voila - that should do the trick :) Best regards, Peter

• Two tacas server on the same network

  Hi all

  Is it possible to have 2 radius server on the same network, if the first authentication server fails,

  Then, the other will be the auth?

  Thank you

  Of course, is. Simply configure your network devices to switch to the alternate server if the first is not available.

• Photosmart Prem C410 all-in-one: our laptop and printer AiO are on the same network, but laptops can 'see' printer

  Our two portable Windows 10 both our Photosmart Prem C410 AiO printer are connected to the same network (as evidenced by checking the name of the network of all 3 devices).  We were able to connect between laptops and printer without problem (printing, scanning, etc.).  A blow, or laptop computer can "see" the printer.  I uninstalled and reinstalled the printer on two laptops, but when I enter the IP address of the printer as part of the installation process, I get the error message (on computers) "your printer is not found on your wireless network.  I used the wireless Wizard connect to the printer, restarted the wireless router and restart the two laptops... the IP of the printer stays the same every time and laptops and printers continue to be connected to the same network named.  Help

  On the printer's wireless radio was 'on' but I clicked OK anyway.    Disconnected and reconnected to the network and noted the address IP of the printer had changed.  Laptops are now able to see the printer.  Problem is solved.

• Is it possible to have two routers on the cable line (T1?)?

  Question?

  is it possible to have two routers on the cable line (T1?)? First router was provided by the cable operator and runs @ standard speed(802.11?), while the router I want to add is a netgear product that will perform @ 2.4 GHz and 5 GHz. is it possible to do this without interfere or affect with speed of cable of the router?

  Thank you

  Rooster

  Question?

  is it possible to have two routers on the cable line (T1?)? First router was provided by the cable operator and runs @ standard speed(802.11?), while the router I want to add is a netgear product that will perform @ 2.4 GHz and 5 GHz. is it possible to do this without interfere or affect with speed of cable of the router?

  Thank you

  Rooster

  What is the router of society provided separate cable from your cable modem? If so then why not just use the Netgear router instead of the provided ISP router?

  If it is a combination cable modem/router device and you want to run the Netgear router as a wireless access point then only...

  Here is a FAQ that will help you in this...

  http://www.dslreports.com/FAQ/11233

  Basically would be configured with a LAN IP in the same range as the IP address you get from the existing cable modem/router Netgear, Netgear is connected directly on the LAN cable port existing via a LAN port modem/router, Netgear DHCP server is disabled and that you configure the single wireless SSID, type of encryption (that is to say.) WPA2 is the best and do not use WEP) and a strong key. Here is an example...

  http://sdrv.Ms/LrESP6

  When you configure the Netgear I recommend that you connect to it with an Ethernet cable if you screw up the wireless and the DHCP part you can find and recover.

• The Switch configuration and Wi - fi router in the same network

  Hi team,

  I have here is the configuration currently as below in the image. To describe the same internet cable is connected to a Cisco switch, which is connected to the PC in LAN (wired). A switch output is connected to the entrance of the wireless router Netgear Nighthawk AC 1900 Smart model of WiFi router # R6900. Wireless devices (laptop) are connected by the router.

  Each device has internet access. However, I am unable to run software LAN or unable to share any file of devices connected to the switch to the connected wireless devices. I can't ping any device the device wireless wired.

  Can anyone suggest what are the settings that I should do or what are the steps I should follow that will make wireless and wired devices in the same network.

  PS Plus early I tried the internet connection to the wireless router and then out of the router to pass, which has solved this problem. But slowing down my internet speed in wired devices. So, is it possible to have all devices in the network even with the current configuration?

  

  Thanks in advance.

  Best,

  Hardik

  I made wi - fi router reset hardware and configured in Access Point mode, that solved my problem.

• 2605dn will not print from a computer, but another computer on the same network print very well.

  The two machines running Win 7 64 bit, both on the same network (such as a printer) all with cable connection to the local network. A single machine prints fine, but since a few days, my PC will not be printed on the printer. PING and TRACERT it is correct, and I tried removing/reinstalling the printer several times. Using the PCL6 driver, as well as a specific driver for printer have same results.  Anyone else having this problem?

  After almost 12 hours of continuous hair-pulling, finally ran across the solution on a Microsoft forum site: it turns out that the problem was a recent update of anti-virus software (McAfee, specifically) who changed the firewall settings.  Can't seem to get the AV software allow constantly to the printer, but temporarily disable the firewall in the AV software has solved the problem.  (the other machine running another AV software package)  I have to just be careful during this 15 minute period.

  Anyway, if you have a similar problem, make sure to check the firewall settings.

• Can I share an e-mail address between a pc and a laptop computer in the same network?

  I would like to be able to access Outlook from my laptop when messages are received on my pc main workstation, advice on how to achieve this? Thanks for any help.

  There are several ways to achieve this.  One way is to use a tool of office connectiopn RDC, VNC, GoToMyPC or Teamviewer.  With tools like these you really not use mail on both computers, but using a PC to access another PC where Outlook.

  Another is to install Outlook on the second PC and configure an account that will access the same mailbox as the access one the first PC.  You share contacts and calendar, but you can receive and send messages on computers or both, with the same e-mail address and it is not too difficult to get contacts and calendar from one PC to the other.

  A third is to place your Outlook data file in a folder that you share on your local network and access to this data from a PC file.  If it is not a recommended approach, it works, provided you don't try to access the data of these two pieces at the same time, and you'll have all your mail, contacts, calendar, tasks, etc. available on both computers.  You will need to make sure that you back up your data frequently as well, just in case, Outlook because Outlook is not designed to work in this configuration.

  You can also buy third-party tools that will enable this type of share, you want.  Here's the safest which provided the data from the file on the network, but they are not free.

  In the future, please ask Outlook questions in the forum for your version of Outlook Outlook.
  http://answers.Microsoft.com/en-us/Office/Forum/office_xp-Outlook
  http://answers.Microsoft.com/en-us/Office/Forum/office_2003-Outlook
  http://answers.Microsoft.com/en-us/Office/Forum/Office_2007-Outlook
  http://answers.Microsoft.com/en-us/Office/Forum/office_2010-Outlook