Two VPN clients remote need to Exchange resources through PIX501

I would like to have remote VPN clients ping each other and exchange their resiurces directly through pix501.

Is this possible? If so, how can I make it work?

With the current code of 6.x, u / shooting VPN traffic between sites or remote access clients is not possible, when this traffic ends on the same interface.

Pix 7.0 code is provided as a feature, which is scheduled for release in Q3.

Thank you

Peter

Tags: Cisco Security

Similar Questions

  • VPN clients cannot access remote sites - PIX, routing problem?

    I have a problem with routing to remote from our company websites when users connect via their VPN client remotely (i.e. for home workers)

    Our headquarters contains a PIX 515E firewall. A number of remote sites to connect (via ADSL) to head office using IPSEC tunnels, ending the PIX.

    Behind the PIX is a router 7206 with connections to the seat of LANs and connections to a number of ISDN connected remote sites. The default route on 7206 points to the PIX from traffic firewall which sits to ADSL connected remote sites through the PIX. Internal traffic for LAN and ISDN connected sites is done via the 7206.

    Very good and works very well.

    When a user connects remotely using their VPN client (connection is interrupted on the PIX) so that they get an IP address from the pool configured on the PIX and they can access resources located on local networks to the office with no problems.

    However, the problem arises when a remote user wants access to a server located in one of the remote sites ADSL connected - it is impossible to access all these sites.

    On the remote site routers, I configured the access lists to allow access from the pool of IP addresses used by the PIX. But it made no difference. I think that the problem may be the routes configured on the PIX itself, but I don't know what is necessary to solve this problem.

    Does anyone have suggestions on what needs to be done to allow access to remote sites for users connected remotely via VPN?

    (Note: I suggested a workaround, users can use a server on LAN headquarters as a "jump point" to connect to remote servers from there)

    with pix v6, no traffic is allowed to redirect to the same interface.

    for example, a remote user initiates an rdp session for one of the barns adsl. PIX decrypts the packet coming from the external interface and looks at the destination. because the destination is one of adsl sites, pix will have to return traffic to the external interface. Unfortunately, pix v6.x has a limitation that would force the pix to drop the packet.

    with the v7, this restriction has been removed with the "same-security-traffic control intra-interface permits".

    http://www.Cisco.com/en/us/partner/products/HW/vpndevc/ps2030/products_configuration_example09186a008046f307.shtml

  • Remote access via NAT VPN client

    I currently have a PIX506e configured to provide access to the Cisco VPN Clients remote vpn. A single client can connect successfully and have access to the planned network. However, as soon as I connect an additional client to the firewall from the same place (the two addresses are translated under the same address) the two tunnels will stop working or could not connect.

    Is the problem that I face, because two customers have the same address public after NAT, or is - it something else? Is there a way to get around this?

    Hello

    A lot of THAT NAT will not work if you use ESP.

    The solution for this is to allow NAT - t on PIX and VPN client.

    PIX:

    The following command active NAT - T (for codes plus late 6.3)

    ISAKMP nat-traversal

    The VPN Client:

    On the Transport tab, under the tab "Enable Transport Tunneling" & select "IPSec over UDP (NAT/PAT).

    HTH

    Kind regards

    GE.

  • Cannot access network resources - Cisco VPN client

    Please see attached the network topology.

    I can connect using the Cisco VPN client and access to all resources of the 192.168.3.0 network

    I can't ping / access to all hosts on the network 192.168.5.0.

    Any ideas?

    Thanks for the help in advance

    AD

    Quite correct.

    Please add has the access list:

    CPA list standard access allowed 192.168.5.0 255.255.255.0

  • Another problem with the configuration of Cisco VPN Client access VPN Site2site

    We have a Cisco ASA 5505 at our CORP. branch I configured the VPN Site2Site to our COLO with a Juniper SRX220h, to another site works well, but when users access the home Cisco VPN client, they cannot ping or SSH through the Site2Site.  JTACS contacted and they said it is not on their end, so I tried to contact Cisco TAC, no support.  So here I am today, after for the 3 days (including Friday of last week) of searching the Internet for more than 6 hours per day and try different examples of other users. NO LUCK. The VPN client shows the route secure 10.1.0.0

    Sorry to post this, but I'm frustrated and boss breathing down my neck to complete it.

    CORP netowrk 192.168.1.0

    IP VPN 192.168.12.0 pool

    Colo 10.1.0.0 internal ip address

    Also, here's an example of my config ASA

    : Saved

    :

    ASA Version 8.2 (1)

    !

    hostname lwchsasa

    names of

    name 10.1.0.1 colo

    !

    interface Vlan1

    nameif inside

    security-level 100

    IP 192.168.1.1 255.255.255.0

    !

    interface Vlan2

    backup interface Vlan12

    nameif outside_pri

    security-level 0

    IP 64.20.30.170 255.255.255.248

    !

    interface Vlan12

    nameif backup

    security-level 0

    IP 173.165.159.241 255.255.255.248

    !

    interface Ethernet0/0

    switchport access vlan 2

    !

    interface Ethernet0/1

    switchport access vlan 12

    !

    interface Ethernet0/2

    !

    interface Ethernet0/3

    !

    interface Ethernet0/4

    !

    interface Ethernet0/5

    !

    interface Ethernet0/6

    !

    interface Ethernet0/7

    !

    passive FTP mode

    permit same-security-traffic inter-interface

    permit same-security-traffic intra-interface

    object-group network NY

    object-network 192.168.100.0 255.255.255.0

    BSRO-3387 tcp service object-group

    port-object eq 3387

    BSRO-3388 tcp service object-group

    port-object eq 3388

    BSRO-3389 tcp service object-group

    EQ port 3389 object

    object-group service tcp OpenAtrium

    port-object eq 8100

    object-group service Proxy tcp

    port-object eq 982

    VOIP10K - 20K udp service object-group

    10000 20000 object-port Beach

    the clientvpn object-group network

    object-network 192.168.12.0 255.255.255.0

    APEX-SSL tcp service object-group

    Description of Apex Dashboard Service

    port-object eq 8586

    object-group network CHS-Colo

    object-network 10.1.0.0 255.255.255.0

    the DM_INLINE_NETWORK_1 object-group network

    object-network 192.168.1.0 255.255.255.0

    host of the object-Network 64.20.30.170

    object-group service DM_INLINE_SERVICE_1

    the purpose of the ip service

    ICMP service object

    service-object icmp traceroute

    the purpose of the service tcp - udp eq www

    the tcp eq ftp service object

    the purpose of the tcp eq ftp service - data

    the eq sqlnet tcp service object

    EQ-ssh tcp service object

    the purpose of the service udp eq www

    the eq tftp udp service object

    object-group service DM_INLINE_SERVICE_2

    the purpose of the ip service

    ICMP service object

    EQ-ssh tcp service object

    inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 clientvpn object-group

    inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group NY

    inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo

    inside_nat0_outbound list of allowed ip extended access any 192.168.12.0 255.255.255.0

    outside_pri_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group NY

    outside_pri_access_in list extended access permit tcp any interface outside_pri eq www

    outside_pri_access_in list extended access permit tcp any outside_pri eq https interface

    outside_pri_access_in list extended access permit tcp any interface outside_pri eq 8100

    outside_pri_access_in list extended access permit tcp any outside_pri eq idle ssh interface

    outside_pri_access_in list extended access permit icmp any any echo response

    outside_pri_access_in list extended access permit icmp any any source-quench

    outside_pri_access_in list extended access allow all unreachable icmp

    outside_pri_access_in list extended access permit icmp any one time exceed

    outside_pri_access_in list extended access permit tcp any 64.20.30.168 255.255.255.248 eq 8586

    levelwingVPN_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0

    levelwingVPN_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.255.0

    outside_pri_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo

    backup_nat0_outbound list extended access allowed object-group DM_INLINE_NETWORK_1 192.168.12.0 ip 255.255.255.0

    outside_pri_cryptomap_1 list extended access allow DM_INLINE_SERVICE_2 of object-group 192.168.1.0 255.255.255.0 10.1.0.0 255.255.255.0

    outside_19_cryptomap to access extended list ip 192.168.12.0 allow 255.255.255.0 10.1.0.0 255.255.255.0

    inside_nat0_outbound_1 to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo

    VPN-Corp-Colo extended access list permits object-group DM_INLINE_SERVICE_1 192.168.12.0 255.255.255.0 10.1.0.0 255.255.255.0

    Note to OUTSIDE-NAT0 NAT0 customer VPN remote site access-list

    OUTSIDE-NAT0 192.168.12.0 ip extended access list allow 255.255.255.0 10.1.0.0 255.255.255.0

    L2LVPN to access extended list ip 192.168.12.0 allow 255.255.255.0 10.1.0.0 255.255.255.0

    pager lines 24

    Enable logging

    debug logging in buffered memory

    exploitation forest asdm warnings

    record of the rate-limit unlimited level 4

    destination of exports flow inside 192.168.1.1 2055

    timeout-rate flow-export model 1

    Within 1500 MTU

    outside_pri MTU 1500

    backup of MTU 1500

    local pool LVCHSVPN 192.168.12.100 - 192.168.12.254 255.255.255.0 IP mask

    no failover

    ICMP unreachable rate-limit 100 burst-size 5

    ICMP allow any inside

    ICMP allow any outside_pri

    don't allow no asdm history

    ARP timeout 14400

    NAT-control

    interface of global (outside_pri) 1

    Global 1 interface (backup)

    NAT (inside) 0-list of access inside_nat0_outbound

    NAT (inside) 0 inside_nat0_outbound_1 list of outdoor access

    NAT (inside) 1 0.0.0.0 0.0.0.0

    NAT (outside_pri) 0-list of access OUTSIDE-NAT0

    backup_nat0_outbound (backup) NAT 0 access list

    static TCP (inside outside_pri) interface https 192.168.1.45 https netmask 255.255.255.255 dns

    static TCP (inside outside_pri) interface 192.168.1.45 www www netmask 255.255.255.255 dns

    static TCP (inside outside_pri) interface 8586 192.168.1.45 8586 netmask 255.255.255.255 dns

    static (inside, inside) tcp interface 8100 192.168.1.45 8100 netmask 255.255.255.255 dns

    Access-group outside_pri_access_in in the outside_pri interface

    Route 0.0.0.0 outside_pri 0.0.0.0 64.20.30.169 1 track 1

    Backup route 0.0.0.0 0.0.0.0 173.165.159.246 254

    Timeout xlate 03:00

    Conn Timeout 0:00:00 half-closed 0:30:00 udp icmp from 01:00 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 01:00 uauth uauth absolute inactivity from 01:00

    timeout tcp-proxy-reassembly 0:01:00

    dynamic-access-policy-registration DfltAccessPolicy

    AAA authentication enable LOCAL console

    AAA authentication http LOCAL console

    the ssh LOCAL console AAA authentication

    http server enable 981

    http 192.168.1.0 255.255.255.0 inside

    http 0.0.0.0 0.0.0.0 outside_pri

    http 0.0.0.0 0.0.0.0 backup

    SNMP server group Authentication_Only v3 auth

    SNMP-server host inside 192.168.1.47 survey community lwmedia version 2 c

    No snmp server location

    No snmp Server contact

    Server enable SNMP traps snmp authentication linkup, linkdown cold start

    Sysopt connection tcpmss 1200

    monitor SLA 123

    type echo protocol ipIcmpEcho 216.59.44.220 interface outside_pri

    Annex ALS life monitor 123 to always start-time now

    Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

    Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

    Crypto ipsec transform-set esp-3des-sha1 esp-3des esp-sha-hmac

    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

    life crypto ipsec security association seconds 28800

    Crypto ipsec kilobytes of life - safety 4608000 association

    Crypto ipsec df - bit clear-df outside_pri

    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

    Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

    card crypto outside_pri_map 1 match address outside_pri_1_cryptomap

    card crypto outside_pri_map 1 set pfs

    peer set card crypto outside_pri_map 1 50.75.217.246

    card crypto outside_pri_map 1 set of transformation-ESP-AES-256-MD5

    card crypto outside_pri_map 2 match address outside_pri_cryptomap

    peer set card crypto outside_pri_map 2 216.59.44.220

    card crypto outside_pri_map 2 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

    86400 seconds, duration of life card crypto outside_pri_map 2 set security-association

    card crypto outside_pri_map 3 match address outside_pri_cryptomap_1

    peer set card crypto outside_pri_map 3 216.59.44.220

    outside_pri_map crypto map 3 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

    outside_pri_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

    card crypto outside_pri_map interface outside_pri

    crypto isakmp identity address

    ISAKMP crypto enable outside_pri

    crypto ISAKMP policy 5

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    crypto ISAKMP policy 10

    preshared authentication

    the Encryption

    sha hash

    Group 2

    life 86400

    crypto ISAKMP policy 30

    preshared authentication

    aes-256 encryption

    md5 hash

    Group 2

    life 86400

    crypto ISAKMP policy 50

    preshared authentication

    aes encryption

    md5 hash

    Group 2

    life 86400

    !

    track 1 rtr 123 accessibility

    Telnet timeout 5

    SSH 192.168.1.0 255.255.255.0 inside

    SSH timeout 5

    Console timeout 0

    management-access inside

    dhcpd auto_config outside_pri

    !

    dhcpd address 192.168.1.51 - 192.168.1.245 inside

    dhcpd dns 8.8.8.8 8.8.4.4 interface inside

    rental contract interface 86400 dhcpd inside

    dhcpd field LM inside interface

    dhcpd allow inside

    !

    a basic threat threat detection

    statistical threat detection port

    Statistical threat detection Protocol

    Statistics-list of access threat detection

    a statistical threat detection host number rate 2

    no statistical threat detection tcp-interception

    WebVPN

    port 980

    allow inside

    Select outside_pri

    enable SVC

    attributes of Group Policy DfltGrpPolicy

    VPN-idle-timeout no

    Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

    internal GroupPolicy2 group strategy

    attributes of Group Policy GroupPolicy2

    Protocol-tunnel-VPN IPSec svc

    internal levelwingVPN group policy

    attributes of the strategy of group levelwingVPN

    Protocol-tunnel-VPN IPSec svc webvpn

    Split-tunnel-policy tunnelspecified

    value of Split-tunnel-network-list levelwingVPN_splitTunnelAcl

    username password encrypted Z74.JN3DGMNlP0H2 privilege 0 aard

    aard attribute username

    VPN-group-policy levelwingVPN

    type of remote access service

    rcossentino 4UpCXRA6T2ysRRdE encrypted password username

    username rcossentino attributes

    VPN-group-policy levelwingVPN

    type of remote access service

    bcherok evwBWqKKwrlABAUp encrypted password username

    username bcherok attributes

    VPN-group-policy levelwingVPN

    type of remote access service

    rscott nIOnWcZCACUWjgaP encrypted password privilege 0 username

    rscott username attributes

    VPN-group-policy levelwingVPN

    sryan 47u/nJvfm6kprQDs password encrypted username

    sryan username attributes

    VPN-group-policy levelwingVPN

    type of nas-prompt service

    username, password cbruch a8R5NwL5Cz/LFzRm encrypted privilege 0

    username cbruch attributes

    VPN-group-policy levelwingVPN

    type of remote access service

    apellegrino yy2aM21dV/11h7fR password encrypted username

    username apellegrino attributes

    VPN-group-policy levelwingVPN

    type of remote access service

    username rtuttle encrypted password privilege 0 79ROD7fRw5C4.l5

    username rtuttle attributes

    VPN-group-policy levelwingVPN

    username privilege 15 encrypted password vJFHerTwBy8dRiyW levelwingadmin

    username password nbrothers Amjc/rm5PYhoysB5 encrypted privilege 0

    username nbrothers attributes

    VPN-group-policy levelwingVPN

    clong z.yb0Oc09oP3/mXV encrypted password username

    clong attributes username

    VPN-group-policy levelwingVPN

    type of remote access service

    username, password finance 9TxE6jWN/Di4eZ8w encrypted privilege 0

    username attributes finance

    VPN-group-policy levelwingVPN

    Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

    type of remote access service

    IPSec-attributes tunnel-group DefaultL2LGroup

    Disable ISAKMP keepalive

    tunnel-group 50.75.217.246 type ipsec-l2l

    IPSec-attributes tunnel-group 50.75.217.246

    pre-shared-key *.

    Disable ISAKMP keepalive

    type tunnel-group levelwingVPN remote access

    tunnel-group levelwingVPN General-attributes

    address LVCHSVPN pool

    Group Policy - by default-levelwingVPN

    levelwingVPN group of tunnel ipsec-attributes

    pre-shared-key *.

    tunnel-group 216.59.44.221 type ipsec-l2l

    IPSec-attributes tunnel-group 216.59.44.221

    pre-shared-key *.

    tunnel-group 216.59.44.220 type ipsec-l2l

    IPSec-attributes tunnel-group 216.59.44.220

    pre-shared-key *.

    Disable ISAKMP keepalive

    !

    !

    !

    Policy-map global_policy

    !

    context of prompt hostname

    Cryptochecksum:ed7f4451c98151b759d24a7d4387935b

    : end

    Hello

    It seems to me that you've covered most of the things.

    You however not "said" Configuring VPN L2L that traffic between the pool of VPN and network camp should be in tunnel

    outside_pri_cryptomap to access extended list ip 192.168.12.0 allow 255.255.255.0 object-group CHS-Colo

    Although naturally the remote end must also the corresponding configurations for users of VPN clients be able to pass traffic to the site of the camp.

    -Jouni

  • Router Cisco VPN Client 877

    I have install a plate rotating and spoke VPN with communication between the rays, the hub is also able to receive connections from VPN clients using the client VPN Cisco.

    Is there a a way to allow communication to the rays using just the VPN Client connection to the hub?

    Static IP Hub / DMVPN IP 10.0.0.1 / 192.168.1.0 LAN

    Spoke 1 Dynamic Ip / 10.0.0.2 DMVPN IP / LAN 192.168.5.0

    Spoke an IP Dynamics 2 / DMVPN IP 10.0.0.3 / 192.168.4.0 LAN

    Spoke an IP Dynamics 3 / 10.0.0.4 DMVPN IP / LAN 192.168.2.0

    The tunnels are running with the communication between the spokes.

    No matter what pointer is welcomed more of

    Thank you

    Hello

    To get this working, you need to add pool VPN client to your ACL cryto on each of the rays.

    For example, if your pool is 192.168.6.0 on RADIUS 1, you must add 192.168.5.0 to 192.168.6.0 permits.

    Also make sure you add denys corresponding in the NAT ACL of rays if you NAT. also if you use split tunneling for VPN clients you need to all your subnets of rays in this ACL too. If you do not use the split tunneling, then you should not need to add anything on the client configuration.

    I hope this helps.

    Luis Raga

  • Win 7 VPN client cannot access remote resources beyond the VPN server

    I have a Win 7 laptop with work and customer Win 7 VPN set up, and through it that I can access everything allowed resources on the remote network.

    I built a new computer, set up the Win 7 client with the exact same parameters everywhere, connected to the VPN with success, but can not access any of the resources on the remote network that I can on my laptop.

    Win 7 64 bit SP 1

    I did research online and suggestions have already had reason of my new set up.  In addition, I have a second computer that I've set up the VPN client, and I'm having the same problem.  VPN connects successfully, but is unable to access the resources.

    Tested with firewall off the coast.

    Troubleshooting Diagnostic reports: your computer seems to be configured correctly, distance resources detected, but not answered do not.

    I created another VPN client on the new computer to another remote network and everything works perfectly.

    Remember the old VPN connection to the remote network that does not work on the new computer works perfectly on Win 7 64 bit laptop computer.

    So, what do I find also different between identical configurations "should be" where we work and two new machines is not?

    It must be something stupid.

    Hello

    This question is more suited for a TechNet audience. I suggest you send the query to the Microsoft TechNet forum. See the link below to do so:
    https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

    Please let us know if you have more queries on Windows.

  • Binds two ISP ASA to remote VPN Client to connect to instead of creating two profiles on the remote client

    Hello

    just a quick,

    TOPOLOGY

    ASA isps1 - 197.1.1.1 - outside

    ASA ISP2 - 196.1.1.1 - backup

    LAN IP - 192.168.202.100 - inside

    I have configured Tunnel on the interfaces (external and backup), but is to link both legs public to serve a thare as redundancy for vpn users and users of the vpn tunnel leave pointing inside IP whenever they want to establish vpn sssion, we want it to be one, so if an interface fails vpn users will not know , but he will try the second for the connection. instead of creating the profile for the two outside of the leg on the vpn client.

    is this possible?

    Hi Rammany.

    In your case, you have only an ASA that connects with 2 ISP in another segment IP... 196.x.x.x (Link1) & 197.x.x.x (Link2). What your condition is you want to have the VPN client who must be consulted with backup. If 196.x.x.x link fails, it should automatically take 197.x.x.x link. That too we should not have the config set in the VPN client backup server. You don have the possibility of having standby active also in asa single.

    I think n so it will work with your current design.

    This option is if your VPN client supports host name resolution (DNS). You can have the VPN created for both the public IP address share the same host name keeping the bond as the primary address 1 and 2 a secondary address. It will work alone.

    Hope someother experts in our forum can help you with that.

  • Cannot access remote resources - Cisco VPN Client

    I'm having a problem with my Cisco VPN Client. I am new to VPN configuration, so this is probably something easy I'm missing. I have a my internet gateway for my LAN 2611XM router and my VPN server. I do all my tests of a society with a high card laptop mobile broadband. VPN connects, but anytime I ping anything in the network Cabinet, he returned with the public IP address of the external interface. I have NAT overload configured so any network can access the internet, inside which it looks like may be causing my problem. I don't know how to fix it. My config running is attatched. No one knows what might happen.

    Oh, almost forgot to add. When I remove the nat overload on my interface fa0/1, the vpn will connect to any resource on the inside.

    Your nat configuration seems to be the origin of the problem. If you are using an ACL to match the source for NAT, then it will be necessary to add the line 1A refuse for the local ip pool for your vpn clients to one only. try that to see how it goes.

    Sent by Cisco Support technique iPhone App

  • Remote access VPN clients

    Hello

    I've set up IPSec VPN remotely and it works fine. I need access to connected VPN clients, and it does not work. I have already added an entry to traffic allowing sheep ACL from inside my network to the VPN.

    More information:

    Inside of the net: 10.1.1.0/24

    Pool VPN: 172.30.1.0/24

    Is it possible to access from my internal network to the VPN users?

    Thanks in advance.

    Best regards.

    Marcelo

    VPN users have access to certain servers via the list of Tunnel from Split.

    Marcelo,

    Split tunnel ACLs must be an IP acl, it is not recommended and supported to set the TCP ports on the split tunnel ACL, the vpn client don't interpret this ACl as a lot are interested in IP, TCP ports, and that could cause you a problem. You can change your config to reflect this. Regarding ACL split tunnel, it must contain the server line. networks that this vpn, customers arrive, remind you this is two-way, as you know.

    So if IT supports the IP range is on this vpnExample ACL vpn clients will be able to reach the IT support guys and vice versa.

    I advise you to change your split tunnel ACLs to specific ports to only the desired servers and the presenters what these customers need to achieve.

    Remove the ports out of this Split tunnel ACLs.

    If you need to restrict services for vpn rather clients use VPN filters.

    http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00808c9a87.shtml

  • Why my VPN clients cannot access network drives and resources?

    I have a cisco asa 5505 configured to be a VPN gateway. I can dial using the anyconnect VPN client. The remote user is assigned an IP address to my specifications. However... The remote user cannot access network such as disks in network resources or the fax server. I've done everything I can to set the right settings NAT and ACLs, but in vain. I write my config... If someone can track down the problem. It would be appreciated!

    : Saved

    :

    ASA Version 8.2 (5)

    !

    ciscoasa hostname

    Cisco domain name

    activate the password xxxxxxxxxxxxx

    passwd xxxxxxxxxxxxxxxxx

    names of

    name 68.191.xxx.xxx outdoors

    !

    interface Ethernet0/0

    switchport access vlan 2

    !

    interface Ethernet0/1

    !

    interface Ethernet0/2

    !

    interface Ethernet0/3

    !

    interface Ethernet0/4

    !

    interface Ethernet0/5

    !

    interface Ethernet0/6

    !

    interface Ethernet0/7

    !

    interface Vlan1

    nameif inside

    security-level 100

    IP 192.168.201.200 255.255.255.0

    !

    interface Vlan2

    nameif outside

    security-level 0

    IP address outside 255.255.255.0

    !

    passive FTP mode

    DNS domain-lookup outside

    DNS lookup field inside

    DNS server-group DefaultDNS

    192.168.201.1 server name

    Cisco domain name

    permit same-security-traffic inter-interface

    permit same-security-traffic intra-interface

    object-group Protocol TCPUDP

    object-protocol udp

    object-tcp protocol

    object-group network obj - 192.168.201.0

    FREE access-list extended ip 192.168.201.0 NAT allow 255.255.255.0 192.168.201.0 255.255.255.0

    NAT-FREE 192.168.202.0 permits all ip extended access list 255.255.255.0

    FREE access-list extended ip 192.168.202.0 NAT allow 255.255.255.0 any

    Extended access list-NAT-FREE enabled a whole icmp

    allow any scope to an entire ip access list

    allow any scope to the object-group TCPUDP an entire access list

    allow any scope to an entire icmp access list

    inside_access_in of access allowed any ip an extended list

    inside_access_in list extended access allow TCPUDP of object-group a

    inside_access_in list extended access permit icmp any one

    outside_access_in of access allowed any ip an extended list

    outside_access_in list extended access allow TCPUDP of object-group a

    outside_access_in list extended access permit icmp any one

    Standard access list DefaultRAGroup_splitTunnelAcl allow 192.168.201.0 255.255.255.0

    access extensive list ip 192.168.202.0 inside_nat0_outbound allow 255.255.255.0 192.168.201.0 255.255.255.0

    inside_nat0_outbound list extended access permit icmp any one

    inside_nat0_outbound_1 of access allowed any ip an extended list

    pager lines 24

    Enable logging

    asdm of logging of information

    Outside 1500 MTU

    Within 1500 MTU

    mask 192.168.202.1 - 192.168.202.50 255.255.255.0 IP local pool KunduVPN

    ICMP unreachable rate-limit 1 burst-size 1

    don't allow no asdm history

    ARP timeout 14400

    NAT-control

    Global 1 interface (outside)

    NAT (inside) 0 inside_nat0_outbound_1 list of outdoor access

    NAT (inside) 1 192.168.201.0 255.255.255.0

    Access-group outside_access_in in interface outside

    inside_access_in access to the interface inside group

    Route inside 0.0.0.0 0.0.0.0 192.168.201.1 1

    Route inside 0.0.0.0 255.255.255.255 outdoor 1

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    timeout tcp-proxy-reassembly 0:01:00

    Floating conn timeout 0:00:00

    dynamic-access-policy-registration DfltAccessPolicy

    Enable http server

    http 192.168.201.0 255.255.255.0 inside

    http 0.0.0.0 0.0.0.0 outdoors

    No snmp server location

    No snmp Server contact

    Server enable SNMP traps snmp authentication linkup, linkdown cold start

    Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA

    Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA

    Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

    Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

    Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

    life crypto ipsec security association seconds 28800

    Crypto ipsec kilobytes of life - safety 4608000 association

    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

    Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

    outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

    outside_map interface card crypto outside

    Crypto ca trustpoint ASDM_TrustPoint0

    registration auto

    name of the object CN = ciscoasa

    Keypairs xxx

    Proxy-loc-transmitter

    Configure CRL

    XXXXXXXXXXXXXXXXXXXXXXXX

    quit smoking

    crypto ISAKMP allow outside

    crypto ISAKMP allow inside

    crypto ISAKMP policy 10

    authentication crack

    aes-256 encryption

    sha hash

    Group 2

    life 86400

    crypto ISAKMP policy 20

    authentication rsa - sig

    aes-256 encryption

    sha hash

    Group 2

    life 86400

    crypto ISAKMP policy 30

    preshared authentication

    aes-256 encryption

    sha hash

    Group 2

    life 86400

    crypto ISAKMP policy 40

    authentication crack

    aes-192 encryption

    sha hash

    Group 2

    life 86400

    crypto ISAKMP policy 50

    authentication rsa - sig

    aes-192 encryption

    sha hash

    Group 2

    life 86400

    crypto ISAKMP policy 60

    preshared authentication

    aes-192 encryption

    sha hash

    Group 2

    life 86400

    crypto ISAKMP policy 70

    authentication crack

    aes encryption

    sha hash

    Group 2

    life 86400

    crypto ISAKMP policy 80

    authentication rsa - sig

    aes encryption

    sha hash

    Group 2

    life 86400

    crypto ISAKMP policy 90

    preshared authentication

    aes encryption

    sha hash

    Group 2

    life 86400

    crypto ISAKMP policy 100

    authentication crack

    3des encryption

    sha hash

    Group 2

    life 86400

    crypto ISAKMP policy 110

    authentication rsa - sig

    3des encryption

    sha hash

    Group 2

    life 86400

    crypto ISAKMP policy 120

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    crypto ISAKMP policy 130

    authentication crack

    the Encryption

    sha hash

    Group 2

    life 86400

    crypto ISAKMP policy 140

    authentication rsa - sig

    the Encryption

    sha hash

    Group 2

    life 86400

    crypto ISAKMP policy 150

    preshared authentication

    the Encryption

    sha hash

    Group 2

    life 86400

    Telnet timeout 5

    SSH timeout 5

    Console timeout 0

    dhcpd outside auto_config

    !

    a basic threat threat detection

    Statistics-list of access threat detection

    no statistical threat detection tcp-interception

    SSL-trust outside ASDM_TrustPoint0 point

    WebVPN

    allow outside

    allow inside

    SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image

    enable SVC

    tunnel-group-list activate

    internal DefaultRAGroup group strategy

    attributes of Group Policy DefaultRAGroup

    value of 192.168.201.1 DNS server

    VPN-tunnel-Protocol svc webvpn

    Split-tunnel-policy tunnelspecified

    value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl

    Cisco by default field value

    attributes of Group Policy DfltGrpPolicy

    Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

    WebVPN

    SVC request enable

    internal KunduVPN group strategy

    attributes of Group Policy KunduVPN

    WINS server no

    value of 192.168.201.1 DNS server

    VPN-tunnel-Protocol svc webvpn

    Cisco by default field value

    username xxxx

    username xxxxx

    VPN-group-policy DfltGrpPolicy

    attributes global-tunnel-group DefaultRAGroup

    address VPNIP pool

    Group Policy - by default-DefaultRAGroup

    IPSec-attributes tunnel-group DefaultRAGroup

    pre-shared key *.

    tunnel-group DefaultRAGroup ppp-attributes

    ms-chap-v2 authentication

    type tunnel-group KunduVPN remote access

    attributes global-tunnel-group KunduVPN

    address (inside) VPNIP pool

    address pool KunduVPN

    authentication-server-group (inside) LOCAL

    Group Policy - by default-KunduVPN

    tunnel-group KunduVPN webvpn-attributes

    enable KunduVPN group-alias

    allow group-url https://68.191.xxx.xxx/KunduVPN

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    type of policy-card inspect dns preset_dns_map

    parameters

    maximum message length automatic of customer

    message-length maximum 512

    Policy-map global_policy

    class inspection_default

    inspect the preset_dns_map dns

    inspect the ftp

    inspect h323 h225

    inspect the h323 ras

    inspect the rsh

    inspect the rtsp

    inspect esmtp

    inspect sqlnet

    inspect the skinny

    inspect sunrpc

    inspect xdmcp

    inspect the sip

    inspect the netbios

    inspect the tftp

    Review the ip options

    !

    global service-policy global_policy

    context of prompt hostname

    no remote anonymous reporting call

    Cryptochecksum:c0e4540d4a07f2c544f0eddb653627cc

    : end

    don't allow no asdm history

    Hello

    What is the IP address of the hosts/servers LAN Gateway?

    If this is not the ASA 'inside' interface IP address then I assume that the problem with VPN is simply routing.

    For example, if your hosts/servers LAN wireless LAN gateway router then the following would happen to your Clients VPN connections.

    • Forms of customers login VPN users through configuring wireless routers static PAT (Port Forward) to interface "inside" ASA
    • Client VPN sends traffic through the VPN to ASA and again the host of the server or LAN.
    • Host/server LAN sees the connection from a network other than the LAN (192.168.202.0/24) and therefore to forward traffic to the default gateway that would likely be the wireless router.
    • Wireless router has no route to the network 192.168.202.0/24 (VPN Pool) and therefore uses its default route to the external network to forward traffic.
    • Client VPN host never received the traffic back as transmitted sound on the external network and abandoned by the ISP

    So if the above assumption is correct, then you would at least need a configuration of the road on the wireless router that tells the device to transfer traffic to the network 192.168.202.0/24 to the 192.168.201.200 gateway IP address (which is the SAA)

    I would like to know if the installation is as described above.

    -Jouni

  • Need help with the configuration of the Site with crossed on Cisco ASA5510 8.2 IPSec VPN Client (1)

    Need urgent help in the configuration of the Client VPN IPSec Site with crossed on Cisco ASA5510 - 8.2 (1).

    Here is the presentation:

    There are two leased lines for Internet access - a route 1.1.1.1 and 2.2.2.2, the latter being the default Standard, old East for backup.

    I was able to configure the Client VPN IPSec Site

    (1) with access to the outside so that the internal network (172.16.0.0/24) behind the asa

    (2) with Split tunnel with simultaneous assess internal LAN and Internet on the outside.

    But I was not able to make the tradiotional model Hairpinng to work in this scenario.

    I followed every possible suggestions made on this subject in many topics of Discussion but still no luck. Can someone help me here please?

    Here is the race-Conf with Normal Client to Site IPSec VPN configured with no access boarding:

    LIMITATION: Cannot boot into any other image ios for unavoidable reasons, must use 8.2 (1)

    race-conf - Site VPN Customer normal work without internet access/split tunnel

    :

    ASA Version 8.2 (1)

    !

    ciscoasa hostname

    domain cisco.campus.com

    enable the encrypted password xxxxxxxxxxxxxx

    XXXXXXXXXXXXXX encrypted passwd

    names of

    !

    interface GigabitEthernet0/0

    nameif outside internet1

    security-level 0

    IP 1.1.1.1 255.255.255.240

    !

    interface GigabitEthernet0/1

    nameif outside internet2

    security-level 0

    IP address 2.2.2.2 255.255.255.224

    !

    interface GigabitEthernet0/2

    nameif dmz interface

    security-level 0

    IP 10.0.1.1 255.255.255.0

    !

    interface GigabitEthernet0/3

    nameif campus-lan

    security-level 0

    IP 172.16.0.1 255.255.0.0

    !

    interface Management0/0

    nameif CSC-MGMT

    security-level 100

    the IP 10.0.0.4 address 255.255.255.0

    !

    boot system Disk0: / asa821 - k8.bin

    boot system Disk0: / asa843 - k8.bin

    passive FTP mode

    DNS server-group DefaultDNS

    domain cisco.campus.com

    permit same-security-traffic inter-interface

    permit same-security-traffic intra-interface

    object-group network cmps-lan

    the object-group CSC - ip network

    object-group network www-Interior

    object-group network www-outside

    object-group service tcp-80

    object-group service udp-53

    object-group service https

    object-group service pop3

    object-group service smtp

    object-group service tcp80

    object-group service http-s

    object-group service pop3-110

    object-group service smtp25

    object-group service udp53

    object-group service ssh

    object-group service tcp-port

    port udp-object-group service

    object-group service ftp

    object-group service ftp - data

    object-group network csc1-ip

    object-group service all-tcp-udp

    access list INTERNET1-IN extended permit ip host 1.2.2.2 2.2.2.3

    access-list extended SCC-OUT permit ip host 10.0.0.5 everything

    list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq www

    list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any https eq

    list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq ssh

    list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 no matter what eq ftp

    list of access CAMPUS-LAN extended permitted udp 172.16.0.0 255.255.0.0 no matter what eq field

    list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq smtp

    list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq pop3

    access CAMPUS-wide LAN ip allowed list a whole

    access-list CSC - acl note scan web and mail traffic

    access-list CSC - acl extended permit tcp any any eq smtp

    access-list CSC - acl extended permit tcp any any eq pop3

    access-list CSC - acl note scan web and mail traffic

    access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 993

    access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq imap4

    access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 465

    access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq www

    access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq https

    access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq smtp

    access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq pop3

    access-list extended INTERNET2-IN permit ip any host 1.1.1.2

    access-list sheep extended ip 172.16.0.0 allow 255.255.0.0 172.16.0.0 255.255.0.0

    access list DNS-inspect extended permit tcp any any eq field

    access list DNS-inspect extended permit udp any any eq field

    access-list extended capin permit ip host 172.16.1.234 all

    access-list extended capin permit ip host 172.16.1.52 all

    access-list extended capin permit ip any host 172.16.1.52

    Capin list extended access permit ip host 172.16.0.82 172.16.0.61

    Capin list extended access permit ip host 172.16.0.61 172.16.0.82

    access-list extended capout permit ip host 2.2.2.2 everything

    access-list extended capout permit ip any host 2.2.2.2

    Access campus-lan_nat0_outbound extended ip 172.16.0.0 list allow 255.255.0.0 192.168.150.0 255.255.255.0

    pager lines 24

    Enable logging

    debug logging in buffered memory

    asdm of logging of information

    Internet1-outside of MTU 1500

    Internet2-outside of MTU 1500

    interface-dmz MTU 1500

    Campus-lan of MTU 1500

    MTU 1500 CSC-MGMT

    IP local pool 192.168.150.2 - 192.168.150.250 mask 255.255.255.0 vpnpool1

    IP check path reverse interface internet2-outside

    IP check path reverse interface interface-dmz

    IP check path opposite campus-lan interface

    IP check path reverse interface CSC-MGMT

    no failover

    ICMP unreachable rate-limit 1 burst-size 1

    ASDM image disk0: / asdm - 621.bin

    don't allow no asdm history

    ARP timeout 14400

    interface of global (internet1-outside) 1

    interface of global (internet2-outside) 1

    NAT (campus-lan) 0-campus-lan_nat0_outbound access list

    NAT (campus-lan) 1 0.0.0.0 0.0.0.0

    NAT (CSC-MGMT) 1 10.0.0.5 255.255.255.255

    static (CSC-MGMT, internet2-outside) 2.2.2.3 10.0.0.5 netmask 255.255.255.255

    Access-group INTERNET2-IN interface internet1-outside

    group-access INTERNET1-IN interface internet2-outside

    group-access CAMPUS-LAN in campus-lan interface

    CSC-OUT access-group in SCC-MGMT interface

    Internet2-outside route 0.0.0.0 0.0.0.0 2.2.2.5 1

    Route internet1-outside 0.0.0.0 0.0.0.0 1.1.1.5 2

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    timeout tcp-proxy-reassembly 0:01:00

    dynamic-access-policy-registration DfltAccessPolicy

    the ssh LOCAL console AAA authentication

    AAA authentication enable LOCAL console

    Enable http server

    http 10.0.0.2 255.255.255.255 CSC-MGMT

    http 10.0.0.8 255.255.255.255 CSC-MGMT

    HTTP 1.2.2.2 255.255.255.255 internet2-outside

    HTTP 1.2.2.2 255.255.255.255 internet1-outside

    No snmp server location

    No snmp Server contact

    Server enable SNMP traps snmp authentication linkup, linkdown cold start

    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

    Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

    Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

    life crypto ipsec security association seconds 28800

    Crypto ipsec kilobytes of life - safety 4608000 association

    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs set group5

    Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

    Crypto map internet2-outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

    crypto internet2-outside_map outside internet2 network interface card

    Crypto ca trustpoint _SmartCallHome_ServerCA

    Configure CRL

    Crypto ca certificate chain _SmartCallHome_ServerCA

    certificate ca xyzxyzxyzyxzxyzxyzxyzxxyzyxzyxzy

    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

    a67a897as a67a897as a67a897as a67a897as a67a897as

    quit smoking

    ISAKMP crypto enable internet2-outside

    crypto ISAKMP policy 10

    preshared authentication

    aes encryption

    md5 hash

    Group 2

    life 86400

    Telnet 10.0.0.2 255.255.255.255 CSC-MGMT

    Telnet 10.0.0.8 255.255.255.255 CSC-MGMT

    Telnet timeout 5

    SSH 1.2.3.3 255.255.255.240 internet1-outside

    SSH 1.2.2.2 255.255.255.255 internet1-outside

    SSH 1.2.2.2 255.255.255.255 internet2-outside

    SSH timeout 5

    Console timeout 0

    a basic threat threat detection

    Statistics-list of access threat detection

    no statistical threat detection tcp-interception

    WebVPN

    internal VPN_TG_1 group policy

    VPN_TG_1 group policy attributes

    Protocol-tunnel-VPN IPSec

    username ssochelpdesk encrypted password privilege 15 xxxxxxxxxxxxxx

    privilege of encrypted password username administrator 15 xxxxxxxxxxxxxx

    username vpnuser1 encrypted password privilege 0 xxxxxxxxxxxxxx

    username vpnuser1 attributes

    VPN-group-policy VPN_TG_1

    type tunnel-group VPN_TG_1 remote access

    attributes global-tunnel-group VPN_TG_1

    address vpnpool1 pool

    Group Policy - by default-VPN_TG_1

    IPSec-attributes tunnel-group VPN_TG_1

    pre-shared-key *.

    !

    class-map cmap-DNS

    matches the access list DNS-inspect

    CCS-class class-map

    corresponds to the CSC - acl access list

    !

    !

    type of policy-card inspect dns preset_dns_map

    parameters

    message-length maximum 512

    Policy-map global_policy

    CCS category

    CSC help

    cmap-DNS class

    inspect the preset_dns_map dns

    !

    global service-policy global_policy

    context of prompt hostname

    Cryptochecksum: y0y0y0y0y0y0y0y0y0y0y0y0y0y

    : end

    Adding dynamic NAT for 192.168.150.0/24 on the external interface works, or works the sysopt connection permit VPN

    Please tell what to do here, to pin all of the traffic Internet from VPN Clients.

    That is, that I need clients connected via VPN tunnel, when connected to the internet, should have their addresses IP NAT'ted against the address of outside internet2 network 2.2.2.2 interface, as it happens for the customers of Campus (172.16.0.0/16)

    I am well aware of all involved in here, so please be elaborative in your answers. Please let me know if you need more information about this configuration to respond to my request.

    Thank you & best regards

    MAXS


    Hello

    If possible, I'd like to see that a TCP connection attempt (e.g. http://www.google.com) in the ASDM logging of the VPN Client when you set up the dynamic NAT for the VPN Pool also.

    I'll try also the command "packet - trace" on the SAA, while the VPN Client is connected to the ASA.

    The command format is

    packet-tracer intput tcp

    That should tell what the SAA for this kind of package entering its "input" interface

    Still can not see something wrong with the configuration (other than the statement of "nat" missing Dynamics PAT)

    -Jouni

  • Unable to connect to other remote access (ASA) VPN clients

    Hello

    I have a cisco ASA 5510 appliance configured with remote VPN access

    I can connect all hosts on the INSIDE and DMZ network, but not able to access other clients connected to the same VPN.

    For example, if I have 2 clients connected to the VPN, customer and CustomerB, with a pool of vpn IP addresses such as 10.40.170.160 and 10.40.170.161 respectively, these two clients are not able to communicate with each other.

    Any help is welcome.

    Thanks in advance.

    Hello

    I'm a little rusty on the old format NAT, but would be what I would personally try to configure NAT0 on the 'outer' interface.

    It seems to me that you currently have dynamic PAT configured for the VPN users you have this

    NAT (outside) 1 10.40.170.0 255.255.255.0

    If your traffic is probably corresponding to it.

    The only thing I can think of at the moment would be to configure

    Note of VPN-CLIENT-NAT0-access-list NAT0 for traffic between VPN Clients

    list of access VPN-CLIENT-NAT0 permit ip 10.40.170.0 255.255.255.0 10.40.170.0 255.255.255.0

    NAT (outside) 0-list of access VPN-CLIENT-NAT0

    I don't know if it works. I did not really have to configure it on any ASAs running older software. There was some similar questions here on the forums for the new format.

    -Jouni

  • Need a guide to configure the VPN Client

    Hello...

    I vpn in my 506th pix and I have ver.4.0.1 software vpn client installed on the other pc (on the outside). In the firewall, there are two types of vpn; VPN site to site and remote vpn access. We use vpn for remote access to allow the vpn client to access our server right?

    This is all new to me and could you give an example how to configure vpn inside my firewall in CLI or PDM command and how to configure the software vpn client.

    Please help us beginners cisco

    Tonny

    Tony,

    Try chanigng a cisco and see if it solves... but otherwise, since you changed the PIX outside IP now, you will be able to make VPN connections to the new public IP address now, if it is routed on the internet.

    can you please try to connect now and let us know what is happening?

  • Need help configuration IOS IPsec to enable communication between the VPN client

    Hi, I need help with the configuration of IPsec VPN router 2811. I want to allow communication between VPN clients, is that possible? I know that ASA, you can do this by using the command "permit same-security-traffic intra-interface".

    The fact is that each Client IP communicator installed, but when they tried to call each other, he failed. I guess that's because the connectivity between them is not permitted because of the VPN connection.

    Thanks in advance...

    Hello

    Try this: -.

    local pool IP 192.168.1.1 ippool 192.168.1.5

    access-list 1 permit host 192.168.1.2< vpn="" ip="" addr="" of="" client="">

    access-list 1 permit host 192.168.1.3< vpn="" ip="" addr="" of="" client="">

    access-list 1 permit 10.10.10.0 0.0.0.255

    < lan="" behind="" the="">

    ISAKMP crypto client configuration group vpnclient

    key cisco123

    ACL 1< binding="" the="" acl="">

    !

    --------Done-------------

    If you do NAT on the router then you might want to exempt your VPN traffic to be NAt had

    Assuming that the NAT of your router is

    overload of IP nat inside source list 111 interface FastEthernet1/0

    !

    ! - The access list is used to specify which traffic

    ! - must be translated to the outside Internet.

    access-list 111 deny ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255

    access-list 111 deny ip 192.168.1.0 0.0.0.255 192.168.1.0 0.0.0.255

    Above two statements are exempt from nat traffic.

    access-list 111 allow ip 10.10.10.0 0.0.0.255 any<, permits="">

    I would like to know if it worked for you.

    Concerning

    M

Maybe you are looking for

  • Cannot edit or delete bookmarks with Windows 8

    I just got a new laptop which has Windows 8. I imported my favorites, but now they do not allow me to edit, move or delete them. I have always used Ctrl D and would then tag a page and place it in a folder. Now when I press Ctrl D the little star bec

  • Deletion and addition of RAM chips

    Oh God, I hope someone will help me.  I'm having a few problems and I guess that now, just trying to make the best of what I have.  I have a Pavilion g7 2297nr.  It's hard as hell, trying to find info on my particular model.  I am trying to remove th

  • Cannot change the resolution on the coming Pro 11 webcam settings?

    Is it possible to change the resolution settings of the built-in Tablet coming 11 Pro webcam? We need to reduce the size of photos that are taken, and there is no way that I can find in the system to do this. We have several tablets of 10 of Latitude

  • ASA5520 migration pool VPN remote access

    Hi all, looking for an entry in the best way to migrate to a new pool to access remote a DHCP address assignment.  We currently use a 24 pool, allowing us to 253 IP addresses... during the recent hurricane, we reached 250 used IP addresses and had to

  • Compatible processors for A7V8X - LA / Kelut-GL6E

    I have a desktop a720n and need a replacement processor.  The motherboard spec sheet shows that two compatible processors: Athlon XP 3200 + Barton Processor (2.20 GHz, 400 MHz) Athlon XP 2700 + Thoroughbred (2.16 GHz 333 MHz) processor Someone I know