.txt-use - data setting

Similar Questions

• Cannot set the focus when reset the data using data sets

  Hi all

  When I click Reset button of the form. I would like to reset the data and then to focus on the first field. I can delete the information I've provided but setFocus in the name of the first field does not work. Help, please.

  I use datasets to reset data.

  Here is my code:
  event: click on

  xfa.datasets.data.loadXML ("< form1 / >", true, true);

  xfa.host.setFocus ("xfa.form1.contactInformation.firstname")

  Thank you

  Cindy

  Put the setfocus on the form event: loan of form1

• Using geocoded in a map based on a vision where two data sets are joined

  Hello

  I would like to create a map based on a view in which two sets of data are joined, where one of the data sets has a column of geocoding.

  Unfortunately this does not work... It seems that a custom view where two sets of data are gathered together where one of them has a geocode column makes the invisible geocode column for the component of the map.

  The following cases work, but we like to combine so that we can combine the different sets of data in the Studio without using the Integrator:

  
  

  -I can create a custom view in which we join two sets of data > the view can be used as a source for component but not the component card (it seems that the geocode column is not found)

  -I can create a custom with a geocode inside column view and that can serve as the source for a map

  What I would like to show, it is that it is possbile to have a data sets from a source system and it's easy to combine an another excel sheet with geo-information and maybe another sheet with different measures of excel. This should be possible since you can collect different sets of data in a custom view.

  Thanks in advance,

  Richard

  Hi Richard

  In regards to my reading of your EQL, I think you can try to rename the "Particulars" to "Endeca_Klanten.Coordinaten" column in the select clause of Omzet_Geo.

  Although not quite elegant, map requires the geo attribute to have the same name (key attribute, no nickname) as the base view, at least that the custom view will not be picked up by card.

  Please have a try.

  Concerning

  Alex

• BI Publisher settings when using the OBIEE analysis as the data set

  Hello world
  
  I've created a BEEP report with an existing OBIEE analysis as all data in the data model. I'm stuck with parameters.
  
  In modeling data for BEEP Guide, section 2.8.1 the following text is displayed: "settings and the list of values are inherited from the analysis of BI and they display running." BI analysis must have default values defined for the filter variables. »

  
  

  When he says of parameters and LOV is inherited from the analysis of BI, what is he referring to OBIEE analysis? And when he says "'filter variables" what is it referring to the analysis of OBIEE? " What should I do on the side of the OBIEE analysis, to activate the settings side BEEP report...?

  
  

  Thank you
  

  I managed to get this working. The documentation is very vague. The BEEP report gets the parameters 'default' and LOV based on the presentation and the column variable in OBIEE analysis he uses as a data set. You can't see these variables as parameters on the BEEP report presentation.

  If you need to use variables of presentation on OBIEE analysis, with a default value. Then create the report BEEP with this analysis, as the set of data. Don't create settings on the side TONE. The BEEP report on a dashboard and there you go, the BEEP report data will be filtered according to the value of the variable of presentation.

• Problems getting started using Variables and data sets

  Hello

  I am new to this forum and new with scripts in Illustrator and scripts in general.

  I have an XML file that contains a number of data sets each composed of a number of text variables that I want to use to create a trading card game.

  Each trading card consists of a text field for the title of the map and a number of icons, which are instances of different symbols

  I wrote a script to create each map and I can load variables in my using javascript: newCard.importVariables (news leader (xmlPath));

  Now, I need to access the data in the data sets to power the card.

  To provide some context, it's a picture of one of the cards with the art of the placeholder:

  

  Currently, for the icon in the upper right corner (the PHASE icon), I use the following code:

  phase = "night";

  phaseIcon = newCard.symbols.getByName (phase);

  phaseIcon1 = newCard.symbolItems.add (phaseIcon);

  phaseIcon1.top = 232;

  phaseIcon1.left = 140;

  I want to be able to do, is to shoot the value during the phase of <>< / phase > TextVariable my dataset XML and insert that into the script, but I don't know how. This is where I'm stuck on how to proceed. Any help is greatly appreciated.

  Thank you

  Nick

  OK, so it takes data sets to be able to get the data of type string, right? This has proved not to be as easy as it seemed

  -----------------

  then to get string data that you used the XML to the file instead, your last sample seems fine, I did the same thing then you posted your sample, I used the xml file

  var xmlfile = File.openDialog("Select a valid XML file","XML:*.xml", false);
  if(xmlfile != null) {
      xmlfile.open("r");
      var xmlstring = xmlfile.read();
      xmlfile.close();
      xmlfile = null;
  } else {
  alert("Error opening XML file.");
  }
  var wolfCardsXML = new XML (xmlstring);
  var currentCard = wolfCardsXML.card[0];
  var phaseValue = currentCard.phase.toString();
  
  alert(phaseValue);
  

• Mac adds the extension txt for dat files

  Hello

  I download the files with the extension dat but when are already downloaded I see another extension txt (F4409.dat.txt). I need to use dat files in another program and convert my file to text file prevents me to do. I would like to block the conversion of files without my approval on my mac. Remove the additional extension (.txt) does not help. I still can't use file in a program that I need for analysis of the data. Help, please.

  AS

  Download from which site?

  Download of what app (a browser)?

• Can I make my table to DataSet table 3d 2D data set?

  Hello.  I'm putting my data in a 3D Board.  I'm not really satisfied with the table 3D data set since that requires a large amount of manipulation of the table whenever I want to do something with the data - I do a lot of analysis, it's a pain.  It is reliable, but it takes space BD and is generally a pain.  I read here (post #6 & #7 if the link don't you shoot directly to it) a few messages by some respected LabVIEW guru they didn't see no reason to 3D tables used.  I was hoping someone might be able to point to a better solution to know how to store and access my data logically.

  I'm n channels of data acquisition (a while but I have will add to this later), that puts me in a table 2D with each line being the channel and the columns are the data points.

  I need to acquire multiple test runs a data value.

  I also need using data in each series of tests, average averages and check the test medium-sized operating are with a tolerance of the average general.

  I also need to be able to revive one of the test tracks if its average does not fall within the tolerance of the average general.

  I use the page in 3D as the series of tests table.  If I can then get some tests, I want to by selecting the corresponding page.

  I'm waiting to save all the test runs at the same time until the user selects to save the data.  Which means that the user has run the minimum number of test runs, and all have averages that fall within the tolerance of the average general.  I love this soley because this test will be carried out different several times for different of UUT and all data for this USE can be saved in a single file.

  I am currently save the file as a binary file (for my purposes of data backup) and then the user can also choose to save it in Excel, with each test on its own sheet.

  I thought to save after each race.  I don't know how add/replace the data in the binary file. I would rather not a separate binary file for each set of tests, but it's not a dealbreaker.

  The only way I see to avoid the 3D Board is back up after each series of tests.  This would mean that I would have a lot more handling of file (when they should be replaced, when the averages should be analyzed, etc..).

  Is the "save after each test cycle" approach that is generally used?  If so, it seems to me that file manipulation would be more prone to error than the manipulation of table 3D (maybe just for me I guess). Can someone tell me otherwise?

  Is there another approach that I have not thought or discovered here?

  Thank you

  Scott

  I think that save after each test cycle is a safer and more reliable way to accomplish what trying to boot of all data and recording at the same time.  This way, if the program crashes, you don't lose all the data because it was still in memory.  The data had been collected so far are safely in a file.  Why do you think of file manipulation would be more subject?

  If you want to add an existing file, then you just use the position to set the file to set the pointer to file at the end of the file, after you open the file.

  You can also watch the TDMS file format because it has means of sorting and organization of several sets of data.

• How to determine the size of the binary file data set

  Hi all

  I write specific sets of data in table in a binary file, by adding each time so the file grows a set of data for each write operation.  I use the set file position function to make sure that I'm at the end of the file each time.

  When I read the file, I want to read only the last 25 data sets (or numbers).  To do this, I thought using the position set file to set the file position where it was 25 sets of data from the end.  Math easy, right?  Apparently not.

  Well, as I was collecting data file size as I began the initial tet run, I find the size of the file (using file order size and get number of bytes so) as the size increases the same amount every time.  My size and the format of my data being written is the same every time, a series of four numbers double precision.

  I get increments are as follows, after the first write - 44 bytes, after 2nd - 52 bytes, 3 - 52 bytes, bytes 44 4th, 5th - 52 bytes, 6 - 52 bytes, 7th - 44 bytes and it seems to continue this trend in the future.

  Why each write operation would be identical in size of bytes.  This means that my basic math for the determination of the poistion of correct file to read only the last 25 sets of data won't be easy, and if somewhere along the line after I've accumulated hundreds or thousands of data sets, what happens if the model changes.

  Any help on why this occurs or on a working method, all about the problem would be much appreciated.

  Thank you

  Doug

  
  

• Import of lvm to express signal does not lead to consistent data set

  When you import a file of lvm captured in a VI, SignalExpress visualizes as dozens of data points separated rather than a set of waveform data. Anyone know if there is a problem with the way I am that capture/storage of the data, or is - what a questions at the end of SignalExpress with handling data? One of the files of lvm header is shown below:

  LabVIEW measurement
  Writer_Version 2
  Reader_Version 1
  Tab splitter
  Decimal_Separator.
  No. Multi_Headings
  X_Columns one
  Time_Pref Relative

  Thank you

  Andy

  p.s. that's using LabVIEW 8.6 and SignalExpress 3.0

  Hi Andy,.

  I opened file lvm in Signal Express and saw the same thing you knew. I had a look in the file in the header properties and noticed that the number of samples has been set to 1. I've changed that to 1276 like you who have many data points and they are all now showing on one data set. So, it seems that is trying to create a set of data for each data item in the file lvm. Try changing the number of samples in 1276 and let me know if this is the correct waveform, you need to see.

  Kind regards

  Jas.W

• When you use a set of accounts, get error "provider was not found.

  I use Windows 7-64 bit.

  I had been using a set of accounts a month ago, when I started having 'provider cannot be found. It cannot be installed correctly. The package is in program files (x 86) then I guess that it is 32-bit.

  Their support team said I need "Microsoft Data Access / JET of objects ' but I don't understand how these things can have deserted.

  I think that the Jet is part of windows 7 and so I don't think that I can download.

  I ran the System File Checker and who found a hash with msjint40.dll problem but it could not fix it. He says that the source file in the store is also corrupt.

  What is going on? Msjint40.dll (winxsx/Syswow64) files do not look as if they have changed recently - 14/07/2009.

  The problem of hash can cause a provider not found message?

  What happened and, more specifically, how do I do?

  2012-10-05 16:52:42, CSI 0000029f hashes for Member file Info? \C:\Windows\SysWOW64\msjint40.dll are not real file [l:24 {12}] "msjint40.dll": "

  Found: {l:32 b:4co68RsJJzz / 05RpZb1lX48bQFAlpOhNYOhLRTD0T2o =} expected: {l:32 b:hz / peGdAuJRqXXf8RXlIEtc + 8CQBNBHngjeC5skUVWc =}

  2012-10-05 16:52:42, CSI Info a 000002-0 hashes of file members \SystemRoot\WinSxS\x86_microsoft-windows-m... mponents-jetintlerr_31bf3856ad364e35_6.1.7600.16385_none_0f472a3521bdcfd4\msjint40.dll is not actual file [l:24 {12}] "msjint40.dll": "

  Found: {l:32 b:4co68RsJJzz / 05RpZb1lX48bQFAlpOhNYOhLRTD0T2o =} expected: {l:32 b:hz / peGdAuJRqXXf8RXlIEtc + 8CQBNBHngjeC5skUVWc =}

  2012-10-05 16:52:42, 000002 a-1 CSI Info [SR] could not reproject corrupted file [ml:48 {24}, l:46 {23}] '------? \C:\Windows\SysWOW64"\[l:24{12}]"msjint40.dll '; source file in the store is also corrupted

  Thank you

  Heather

  The date of 07/14/2009 of the file is correct.

  Did anything else on PC donations problems?

  You have a real MS win7 dvd or only a recovery disk?

  If you run chkdsk which reveals problems?

• How to calculate daily, hourly average for the very large data set?

  Some_Timestamp	"Parameter1"	Parameter2
  1 JANUARY 2015 02:00. 00:000000 AM - 07:00	2341.4534	676341.4534
  1 JANUARY 2015 02:00. 01:000000 AM - 07:00	2341.4533	676341.3
  1 JANUARY 2015 03:04. 01:000000 PM - 07:00	5332.3533	676341.53
  1 JANUARY 2015 03:00. 01:000046 PM - 07:00	23.34	36434.4345
  JANUARY 2, 2015 05:06.01:000236 AM - 07:00	352.33	43543.4353
  JANUARY 2, 2015 09:00. 01:000026 AM - 07:00	234.45	3453.54
  3 FEBRUARY 2015 10:00. 01:000026 PM - 07:00	3423.353	4634.45
  FEBRUARY 4, 2015 11:08. 01:000026 AM - 07:00	324.35325	34534.53

  We have data as above a table and we want to calculate all the days, the hourly average for large data set (almost 100 million).  Is it possible to use the sql functions of analysis for better performance instead of the ordinary average and group of?  Or any other way better performance?

  Don't know if that works better, but instead of using to_char, you could use trunc. Try something like this:

  select
      trunc(some_timestamp,'DD'),
      avg(parameter1)
  from
     bigtable
  where
     some_timestamp between systimestamp-180 and systimestamp
  group by
     trunc(some_timestamp,'DD');
  

  Hope that helps,

  dhalek

• How to use Data Guard with E-Business Suite

  Hello

  I'm trying to get my head around how would you use Data Guard with E - Business Suite.

  I know that you can use only physical standby with EBS, however I have a few basic questions about specific values < SETTING > and how they are treated by a standby.

  Given that the standby and primary servers will have different host names and that generally there are < FRAME > specific values that include the hostname, where they will have to change on the standby server, both from the point of view of the battery backup Apps and within the standby database itself, I wondered how it would happen.

  Usually, EBS cloning process would change the < FRAME > target settings in the target apps stack and the target database (for example, parameters such as FND_NODES etc.).

  Q1. However I do not know how the process of cloning E - Biz would fit with a database of the day before?

  Q2. As the standby database won't even be in an open State, I don't know yet how you would apply a party any of the cloning process to a database of pending to the target?

  Q3. Even if you were able to change on the eve of the database to reflect the < FRAME > from backup server, it would mean surely it was more a physical copy of the primary database, that's why it would be more a day before.

  All a bit confusing - any clarification appreciated

  Jim

  PL see if MOS Doc 1070033.1 can help you

• presentation of the State - side by side data sets

  Hello together,

  Unfortunately I couldn t find a solution to my problem in the forum.

  So I start a new discussion.

  I want to change the presentation of a report.

  The default layout looks like this:

  data set 1

  data set 2

  DataSet 3

  DataSet 4

  data set 5

  DataSet 6

  DataSet 7

  I would like to change the layout like this:

  DataSet dataset DataSet 1 3 2

  DataSet dataset DataSet 4 6 5

  DataSet 7

  Data sets should be placed side by side.

  Is it possible?

  Thanks in advance,

  Patrick

  PatrickL says:

  Hello together,

  Unfortunately I couldn t find a solution to my problem in the forum.

  So I start a new discussion.

  I want to change the presentation of a report.

  The default layout looks like this:

  data set 1

  data set 2

  DataSet 3

  DataSet 4

  data set 5

  DataSet 6

  DataSet 7

  I would like to change the layout like this:

  DataSet dataset DataSet 1 3 2

  DataSet dataset DataSet 4 6 5

  DataSet 7

  Data sets should be placed side by side.

  Is it possible?

  Always include the information referred to in the Re: how to get the answers from the forum by asking a question.

  This can be done by using a standard report with custom report and CSS model.

• Several data sets with SetFieldValues

  Here is a simplified version of what I'm trying to do.

  I have two drop-down menus. Each has 3 different options.

  • Drop 1 - Apple, banana, strawberry.
  • 2 - clock, window, door drop.

  I have a field of text next to each drop down.

  • Drop-down list 1 - 'colorfield' is the name of the corresponding text field
  • 2 - drop "shapefield" is the name of the corresponding text field

  I want that text from the fields to fill what is selected in the drop-down lists. I can get everyone to work separately, but when I add the script for both, only continues to operate.

  Here's what I have.

  Doc Javascript

  // Data Set 1
  var oneData = {
         "Apple": {
          color: "red"
      },
          "Banana": {
          color: "yellow"
      },
          "Strawberry": {
          color: "red"
      },
    };
  // Data Set 2
  var twoData = {
          "Clock": {
          shape: "round"
      },
          "Window": {
          shape: "square"
      },
          "Door": {
          shape: "rectangle"
      },
   };
  // Populate fields function 1    
  function SetFieldValues(fruit) {
      this.getField("colorfield").value = oneData[fruit].color;
  }
  // Populate fields function 2    
  function SetFieldValues(objects) {
      this.getField("shapefield").value = twoData[objects].shape;
  }
  

  Custom script knocks on combo 1

  if (event.willCommit) {
      if (event.value == " ") this.resetForm(["colorfield"]);
      else SetFieldValues(event.value);
  }
  

  Custom script knocks on combo 2

  if (event.willCommit) {
      if (event.value == " ") this.resetForm(["shapefield"]);
      else SetFieldValues(event.value);
  }
  

  Thank you!

  There is a reason, it is not a name of keyword that already exist, the computer program is not smart enough to determine who you mean. It goes the same for function names. You have 2 functions with exactly the same name but each run another block of code. The usual way that a program solves this dilemma is to use the last definition of the function. You must uniquely name functions of your "SetFieldValues".

• Current_date in Date setting

  Hello guys!
  
  I'm putting the CURRENT_DATE as default in my date setting. I'm working on the 11g Publisher data model.
  
  Is it possible? Otherwise, no work around?
  
  Thanks for your time!
  
  Kind regards
  Ariel

  Sorry responded again by mistake

  Try this

  {$$SYSDATE ()}

  If it helps you assign points marking it as correct or more useful and more close the thread as answered so that it is useful for others

  Published by: Avinash_Varma on March 5, 2013 10:52