Type of hard disk Y550P

Similar Questions

• How to check the type of hard disk of the windows operating system?

  on linux, we can find the hdd for example of name setail

  Type a - ide

  SDA - ACHI or sata or sas

  a way to find the type of hard disk in the windows operating system? as linux

  any command or something

  In Windows 7, you can get a lot of details by selecting Start, all programs, accessories, System Tools, system information, components, storage disks. It was very similar to Windows XP, but for all information users tend to use Everest or Belarc Advisor for additional information not available. Everest has been best Bellarc advice but they ceased to offer tan updated free version. However, the 2.20 version is always available from third-party sites.
  http://www.Softpedia.com/get/system/system-info/Everest-Home-Edition.shtml

• Type of hard disk

  Please help me determine my type of hard drive for my Sony Vaio VGN FS742W and the type of pin? Thank you, Art

  Here are the specs for your Sony Vaio VGNFS742W marketing

  http://192.168.74.75/release/specs/VGNFS742W_mksp_revision.PDF

  If my post answered your question, please mark it as "accept as a Solution.

• Need info on type of hard disk for Satellite A100

  I have a model of Satellite A100 (PSAA9E)

  It used to power up, but I need all the info on the hard drive, which models are compatible (plug-and-play style) so I can buy a 2nd hand laptop and use my old hard drive
  (assuming this is possible)

  Thank you

  In Satellite A100 a SATA interface HARD drive and if you want to use the data you can simply buy box USB HDD and connect it to any PC or laptop as external device.
  So you will have full access to all the data stored there.

  Good bye

• Compact virtual hard disk and change the type of drive in static

  Hi all

  I want to change the type of my dynamic static vm disk and now I want to compact the virtual hard disk memory for this virtual machine but I want to it without affecting the control points of this virtual machine that I created earlier. I use the SCVMM 2012 administration console. Any reg suggestions it will be useful.

  Thank you

  You should post your question in the following forum for help and appropriate responses:

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt

• Drive light external HARD disk Warrior exploded

  I use DiskWarrior do a reconstruction of the hard drive to save the files, if possible. Hard drive does not appear on the desktop, which had been seen as a USB device on system information. During the reconstruction, the Seagate external HARD disk light exploded and is no longer visible to the Profiler system as a USB device. Should I cancel the reconstruction? Should I try disk referee to 'stabilize' the disc and run Disk Warrior?

  Can you describe the real problem which caused you to run DiskWarrior "to save the files?  Who can provide a clue about your current situation.

  If DiskWarrior' forever,' you have to cancel rebuild it later.  How long it has beed running?  It may take time, if repairs are done by DiskWarrior.

  DiskWarrior works repairing data directory player (which defines where the files are stored).  There are other types of utilities who hunt the disc for actual data.  For example

  https://www.prosofteng.com/data-rescue-recovery-software/

• I can't and never been able to open a file that was previously saved on hard disk by selecting the print option to get in the print dialog box

  I can not and never been able to open a file that was previously saved on hard disk by selecting the print option to get in the print dialog box. Firefox displays gooblygook, even if the name of file is an html element, the Notepad of Windows crashes, MS Excel does not recognize the file type. MS Word also displays goobblys when the file has no file extension.

  If you use the file printing, then you will get a file that is supposed to be sent to a printer, and this file has any sort of code formatting for this printer.

  Open such a file in Firefox or a text editor can only work if you use one printer for text to print the file to, then make sure that such a printer is installed and selected.

• Satellite 300CDT: number of HARD disk - partitions show only 4 GB

  I have an old Satellite 300CDT, I can't support it appears not yet listed on the Toshiba site.
  I have added a new hard drive and bought a 40 GB drive, but it will only show 4 GB per partition.
  I want 2 partitions that I have and in fdisk I said 50% for each but it only shows 4GB each even though it says support big readers.
  I'm running Windows Me.
  Is it possible for an old laptop of this type to display the size of the hard drive.

  Thank you

  Hello

  Did you use the FAT32 or NTFS?
  I use partition Magic 8 to do and to manage the partitions on the HARD disk.
  In my opinion, you should try this program. I think that using the PM8 you will get the total size of the HARD drive.

• HP Pavilion 15-r007TX: Smart hard disk error

  Hello.

  The last 2 days im getting Smart hard drive failure, everytime I turn on my laptop. But it works very well but there are some unexpected Frost in between jobs.

  It is said

  Hard drive 1 (301)

  If I run the system diagnosticks, it gives me an ID QCU008-7AK882-XD7V7F - 80A 203 failure
  and a product ID (i forgot to remember).

  What could have caused this problem? And what is the solution for this?

  I need to replace the hard drive? How much it could cost to replace?

  My PC is under warranty Accedential and type of HWM on-site service.

  Please help me.

  You need to make a claim. The hard disk will be covered and will cost you nothing so that the replacement of on-site service. It's a bad hard drive. You save?

• Pavilion p7 - 1417c: how many hard disks can accept to my machine?

  I recently installed a 5 TB disk (E:\) and it works fine.  The drive that I replaced was a 2 TB WD drive. My old 2 TB drive can be installed in the Bay under the DVD drive? My machine is p7 - 1417c, s/n 3CR2460P90. My machine can get 2 hard drives in addition to the 1 with which it came?

  

  Greetings,

  It seems you have two (maybe three-hard to see) berries of HARD disk in the HARD drive cage.

  You can also buy an adapter for the optical drive Bay HARD drive open. Or just join the 3.5-inch HARD drive bay with screws. If this Bay is 2.5 inches, you can use an SSD.

  You have five SATA ports on the motherboard (MB).

  Some of the MB SATA ports are going to be slower speeds of legacy. You might have some ports SATA 1. You may need to use jumpers when installing the disk HARD SATA 3. You may have a compatibility issue back. It's been a while since I had to deal with this type of problem. I'm a little fuzzy on potential problems when using 1 SATA disk HARD SATA 3.

  SATA MB ports five minus the optical drive to the MB connection gives four connections available for HARD disks.

  You also need to supply connections (or will need to purchase the power adapters) from food to run five disks.

  I don't see what you have.

  See you soon!

• Airport utility in windows 10 detect but wireless internet does not detect the hard disk, how to do?

  Airport utility in windows 10 does not detect the hard disk, how to?, the Office detect wireless internet no hard drive.

  What hard drive? It of a time capsule, or is it a drive connected to an airport extreme?

  What model number is the most convenient airport?

  Any plugged into USB drive must be formatted FAT32 (no other type of FAT as exFAT) or HFS +, IE standard Apple format.

  In addition, not all drives are recognized.

  The internal drive of the TC must be recognized, but there could be problems as well according to the age.

• Files missing after moving iMovie events from local disk to external HARD disk. Are they lost?

  Hi all

  Tonight, I tried to clear up little space on my local HARD drive and wanted to spend my events/projects of the iMovie local library to an external HARD disk, which I connected via firewire 800.

  I opened iMovie (v10.1 - current version with all updates installed). I clicked on an event to highlight and then the FILE--> COPY OF LIBRARY of selected EVENTS.

  There, I sailed on the external drive and created an iMovie new library called ReWatch2015. I copied successfully eight different events, including files from my external hard drive.

  The ultimate goal is to get rid of them on the HARD drive internal, I highlighted the 20 remaining events I wanted to move and then used the FILE--> MOVE of EVENTS at the LIBRARY and specified ReGen_2015.

  It seemed at first glance to move. In fact, he seemed to move too darn fast in my opinion. When I looked at home in the library of the external drive, they were nothing more than a string of question marks, with a message telling me that particular item is not found and re-import the original clips. It's impossible because I have not kept the original source material on my internal drive. I had asked before if they are preserved in the library of iMovie and told me Yes, so I that's why I deleted the original source material.

  Don't see no activity on the disks, I did the cmd - Z to go back. Events have now shown upward into the iMovie library internal. HOWEVER, they still have the question mark, with msg on reimport. What is scary, is that if I go to ALL projects of them have visible thumbnails. Yet, when I click on any of these thumbnails to load the project into the editor, I am back to the page of question mark again.

  Are the file on drive HARD internal, and they just disassociated projects, or two-thirds of my library of events of 2015 are now toast? I was not under any type of backup Time Machine to be able to recover them, and frankly, if they left, it is not the end of the world since I was of the .mp4 displayed on Vimeo. But, I would just assume the iMovie library intact if possible.

  Suggestions on how to recover are greatly appreciated!

  Robert

  Hi Robert

  Am having exactly the same problem on a new iMac 2016 running El Capitan: when I want to MOVE events such as you describe it, they sometimes get lost in the original library, both in the target library. Like you, I noticed that a such attempt to move just a very short time even if several GB of data play a role. Sometimes however, iMovie is able to move successfully. I my case, I had to re - import events so lost since an additional backup, I got on another external drive that I couldn't find the clips 'lost' on the HARD drive more. Very scary!

  I think it's an iMovie/El Capitan question which could be corrected with future updates. The only solution I've found is to the events of the FIRST COPY, and then check if the target is really OK and only then select the MOVE option, which will remove the original library to free up space. In addition, I plan to copy on a regular basis my library full iMovie on an extra disk to backup using the finder.

  Did you find anything in the meantime?

  Morgy

• How to back up files after a HARD disk failure internal?

  My Macbook Pro (version 2012, obtained again a few months ago) could not start after getting in the middle of the loading screen and after trying to repair disk utilities, he told me that it is not repairable, and I need to save as many files as possible and try to reinstall the drive/operating system. I wasn't expecting a problem of this size so little time, so I didn't have a backup of my files either facts as it was not visible all the problems with my computer before he decided to break up after it sleep for a while. I have my external hard drive to transfer files, but when I try to use the function "restore" in the disc utilities (erasing files on my external drive and move my Mac HD here) it tells me that it is not a map of GPT partition on my external hard drive. I don't have a mac for the recovery target mode. I guess I might have to install OSX Yosemite on the external drive but how do I do this and how can I move my files (if possible) that him?

  I have to save it as I have a lot of paid apps installed in my mac.

  Thank you very much!

  Sorry for the hearing that, I had the same problem when my SSD PCIE crashes and I know that his could be much more frustrating on the losses of personal data that the device already has simply malfunction, since your HARD disk drive starts rained and you do not another machine of Mac, try visiting the genius bar with your Mac and another external drive start your computer in target disk mode and use a thunderbolt cable connect to the genius bar test computer, if your internal drive seems to read, you know what to do then, if it is not or not yet readable and you still don't want to not give up your data, you might need to turn the player on recovering data from third-party company to disassemble your hard drive and do it for you , and the cost is usually higher than normally expected.

  But you said that your attempt to return to your 'paid apps', I don't know which way you have those apps, but the property of an application generally belongs to your method of purchase (as your account), but not the machine. If you paid for apps for your Apple ID, you have them again in your Apple ID and able to re-download after that your Mac got repair, if you have Steam games, they will also with the account Steam, not a single Machine, so be sure the property type of the apps then all do next

• HP Pavilion 400-434 Office: intelligent control of hard disk: failure

  Hello

  It all started when the computer would go blank right after startup, the HP logo would come upward, then 'auto repair preparation", more... Just empty. After reading the forums online, I did all the possible troubleshooting steps and at the end I did the SMART test... the result was:

  Verification of the processor: past

  Intelligent control of hard disk: failure

  Failure ID: RGD7MK-7HV7RC-9XJ16K-60BB03

  After obtaining these results, when I turn on the computer, it gives me a blue screen saying: drive SMART 1 error (301) and told me to test once again, that I did and got the same result as above.

  Here is some info from the computer:

  Model: HP Pavilion slimline 400-434

  Processor type: pentium (R) of the Intel (R) J2900 @2. 41 GHz

  Thanks for your help!

  Hi there @Brugalgirl

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that your computer does not start successfully, and you found a Smart Drive 301 error code. I'm happy to help you with this.

  I checked the ID of the failure, you've posted and verifies that the error. Unfortunately, this means that your hard drive needs to be replaced.  In view of the fact that the system does not boot, it is likely that the hard drive is completely unreadable, but depending on what you have on this subject, it may be worth your while to check with a local computer service shop and see if they can help to recover data from your hard drive.

  If your system is relatively new and may be covered by the warranty, or if you wish to fix with HP for the guarantee system, you can call in hotline to make these arrangements. In this case, please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Otherwise you can look at a replacement hard drive yourself. If you have a set of recovery media, then you already have a factory image HP, which allows you to put in place a new hard drive with your original operating system. If is no longer, you have a set or did not have a set of recovery media, so you can see if there are not yet available for your model.

  HP computers - get HP recovery disks or HP USB recovery disc

  Let me know if you need help most. If it solves your problem, please mark this message as a solution.

• Y430: Not sure that turn off hard disks is no...

  I have a Vista-based Y430. I am now on feeding management of Lenovo on Vista (thanks to this forum) but I'm not 100% sure what the selection of "turn hard drives off" does, well, obviously it turns off hard disks but which live the user when this happens? I noticed that when my computer is put to sleep (even if plugged in) for a longer period, it stopped but restarts when I open it up. It is since turning off hard drives or is it something else? It seems to happen only after having been asleep for over an hour. It drives me crazy because it closes everything I had opened. I'm the type of user who likes to open documents, browsers, and even games for long periods. I scanned for viruses and spyware, but I don't think that's the problem. So, I think it's the judgment of hard drives, but since I'm not sure that I thought I'd ask.

  Moderator Note: Type added to the line object for clarity.

  It is the complexity of the problems in P - and C-States of the processor, Vista driver model and drivers themselves. It cannot be cured by what it is. The only way for you is using Hibernate mode instead of view 'sleep' (I do).

  Regarding the stop discs on a charge down zero - it is useful energy saving because order HDD consumption less power, but spinning upwards and dwn constantly does no good on the HARD drive itself, so this prefferably not not to use this function.