Type of material of the ACS

Similar Questions

• 5.2 of the ACS and Cisco ACE RBAC does not...

  Would be grateful for help here if it can be provided.

  I am configuring GANYMEDE auth for a Cisco ACE through our 5.2 ACS server. I think that I installed everything correctly but when I connect with my GANYMEDE account it gives me only monitor network privileges.

  This is the Configuration of ACE, I use:

  XXXXXXXX, host 1.1.1.1 key radius-server

  XXXXXXXX, host 2.2.2.2 key radius-server

  RADIUS-server timeout 10

  RADIUS-server deadtime 30

  !

  AAA group Ganymede Server + ACS

  Server 1.1.1.1

  2.2.2.2 Server

  output

  !

  AAA authentication login default group local ACS

  AAA authentication login console Group local ACS

  Default accounting AAA group ACS

  !

  This is the Configuration of the ACS:

  

  When I connect to the ACE I see authenticating and pulling the right group of the ACS journal:

  Connected to the ACS status details user peripheral name server device name group Service identity store identity network access group

  Apr 8:57:40.566 30.13 AM xxxckxxx

  AFA-ACE-internal

  Device Type: all device Types: load balance devices, network, location: Cameron Enterprises: Oklahoma: Data Center - 1 unit Access.TACACS

  AD1 all groups: administrator - full HAPP-CSACS

  Apr 8:52:20.256 30.13 AM xxxckxxx

  AFA-ACE-internal

  Device Type: all device Types: load balance devices, network, location: Cameron Enterprises: Oklahoma: Data Center - 1 unit Access.TACACS

  AD1 all groups: administrator - full xxx movies

  Apr 8:43:43.276 30.13 AM xxxckxxx

  AFA-ACE-internal

  Device Type: all device Types: load balance devices, network, location: Cameron Enterprises: Oklahoma: Data Center - 1 unit Access.TACACS

  AD1 all groups: administrator - full xxx movies

  But when I log in AS and do a show users that I get:

  * xxxckxxx Dev_VC pts/2 Apr 30 09:57 (x.x.x.x) monitor-network-default domain

  I've searched for days to find a solution for this with no luck. Any help would be greatly appreciated.

  Thank you.

  Well, it should work effectively at the same time.

  Could you please check the GANYMEDE of ACS logs and check the newspaper correct PROFILE of SHELL (Shell Administrator profile-material) are selected.

  This can be checked by virtue:

  Monitoring & reports >

  Reports >

  Catalog >

  AAA Protocol > authorization Ganymede

  They provide an output of

  Field of Show running-config

  Would appreciate if you can share the result here.

  Jatin kone

  -Does the rate of useful messages-

• Why the ACS is blocking my connection to the Console?

  I have aaa to my SWs one routers, but wen my server goes down that I can't have access to the console port.

  My config is attached and debug aaa authorization.

  These are debugs it for each access: Telnet user, consoling Ganymede user Ganymede and testing of Pentecost the local user.

  Telnet access

  Oct 15 01:03:09: AAA: analyze name = tty2 BID type =-1 ATS = - 1

  Oct 15 01:03:09: AAA: name = tty2 flags = 0 x 11 type = 5 shelf = 0 = 0 = 0 = channel 2 = 0 port adapter slot

  Oct 15 01:03:09: AAA/MEMORY: create_user (0x2778E84) user = ruser 'NULL' = 'NULL' ds0 = 0 port = 'tty2' rem_addr'10.10.10.23 = 'authen_type = ASCII service = CONNECTION priv = 1 initial_task_id = ' 0', vrf = (id = 0)

  Oct 15 01:03:10: CDP-4-NATIVE_VLAN_MISMATCH %: incompatibility of VLAN native on GigabitEthernet0/37 (102), was discovered with tst1-s2 GigabitEthernet0/1 (1).

  Oct 15 01:03:11: AAA/MEMORY: free_user (0x28E1BFC) user = ruser 'ACS-USER' = 'NULL' port = 'tty2' rem_addr = '10.10.10.23' authen_type = ENABLE priv = 15 = ASCII service

  Oct 15 01:03:13: AAA/MEMORY: free_user (0x2778E84) user = ruser 'ACS-USER' = 'NULL' port = 'tty2' rem_addr = '10.10.10.23' authen_type = ASCII = priv = 1 CONNECTION service

  Access to consoles (work of Pentecost the ACS user)

  Oct 15 01:08:57: AAA: analyze name = tty0 BID type =-1 ATS = - 1

  Oct 15 01:08:57: AAA: name = tty0 flags = 0 x 11 type = 4 shelf = 0 = 0 = 0 = 0 = 0 channel port adapter slot

  Oct 15 01:08:57: AAA/MEMORY: create_user (0x28AA8E4) user = ruser 'NULL' = 'NULL' ds0 = 0 port = "tty0" rem_addr = "async" authen_type = service ASCII = CONNECTION priv = 1 initial_task_id = '0', vrf = (id = 0)

  Oct 15 01:09:11: AAA/MEMORY: free_user (0x27C0DC4) = user tweak "ACS-USER" = "NULL" port = "tty0" rem_addr = "async" authen_type = ASCII service = ENABLE priv = 15

  Oct 15 01:09:18: AAA/MEMORY: free_user (0x28AA8E4) = user tweak "ACS-USER" = "NULL" port = "tty0" rem_addr = "async" authen_type = ASCII = priv = 1 CONNECTION service

  Access console (not working whit the local user)

  Oct 15 01:05:24: AAA: analyze name = tty0 BID type =-1 ATS = - 1

  Oct 15 01:05:24: AAA: name = tty0 flags = 0 x 11 type = 4 shelf = 0 = 0 = 0 = 0 = 0 channel port adapter slot

  Oct 15 01:05:24: AAA/MEMORY: create_user (0x27C1310) user = ruser 'NULL' = 'NULL' ds0 = 0 port = "tty0" rem_addr = "async" authen_type = service ASCII = CONNECTION priv = 1 initial_task_id = '0', vrf = (id = 0)

  Oct 15 01:05:36: AAA/MEMORY: free_user_quiet (0x27C1310) = user tweak "LOCAL_USER" = "NULL" port = "tty0" rem_addr = "async" authen_type = 1 = 1 = 1 private service

  Oct 15 01:05:36: AAA: analyze name = tty0 BID type =-1 ATS = - 1

  Oct 15 01:05:36: AAA: name = tty0 flags = 0 x 11 type = 4 shelf = 0 = 0 = 0 = 0 = 0 channel port adapter slot

  Oct 15 01:05:36: AAA/MEMORY: create_user (0x28D201C) user = ruser 'NULL' = 'NULL' ds0 = 0 port = "tty0" rem_addr = "async" authen_type = service ASCII = CONNECTION priv = 1 initial_task_id = '0', vrf = (id = 0)

  Oct 15 01:06:09: AAA/MEMORY: free_user_quiet (0x28D201C) = user tweak "NULL" = "NULL" port = "tty0" rem_addr = "async" authen_type = 1 = 1 = 1 private service

  Oct 15 01:06:09: AAA: analyze name = tty0 BID type =-1 ATS = - 1

  Oct 15 01:06:09: AAA: name = tty0 flags = 0 x 11 type = 4 shelf = 0 = 0 = 0 = 0 = 0 channel port adapter slot

  Oct 15 01:06:09: AAA/MEMORY: create_user (0 x 2773004) = user tweak 'NULL' = 'NULL' ds0 = 0 port = "tty0" rem_addr = "async" authen_type = service ASCII = CONNECTION priv = 1 initial_task_id = '0', vrf = (id = 0)

  Oct 15 01:06:41: AAA/MEMORY: free_user (0 x 2773004) = user tweak "NULL" = "NULL" port = "tty0" rem_addr = "async" authen_type = ASCII = priv = 1 CONNECTION service

  Thanks for your help.

  Change your orders

  AAA of default login authentication group Ganymede + activate

  the AAA authentication enable default group Ganymede +.

  TO

  AAA authentication login default group Ganymede + local

  the AAA authentication enable default group Ganymede + activate

  Kind regards

  Prem

  Please if it helps!

• 802. 1 x with the ACS and Windows AD

  Hello

  Im trying to configure 802. 1 x with ACS 5.2 but I am wrong as his very differnet ACS 4.2.

  I installed the ACS for the field and think that I installed the external Idnetity store, however when I try to authenticate a pc using probable authentication "PEAP (EAP-MSCHAPv2), I get a reason for failure 22056 object was not found in the store there is identity.

  Marco

  Hi Marco,.

  I guess you missed a mapping configuration in the Section of access policy.

  Create an Access Service name AS-802. 1 x select user select the Service Type, and select network access. Select the identity of political Structure and authorization. Select PEAP as the authorized Protocol. Click on finish

  You will see the new service click on identity.

  Select the source of the identity you have created, then save.

  Click permission

  Select an access permission by default authorization rule and save.

  Create a Service access rule name 802. 1 x

  Select the Protocol Radius as a Condition and as a compound Condition select RADIUS - IETF:Service - Type match box, then select the service that you created before.

  then you can try again.

  concerning

  Alex

• I am (early 2013) iMac 21.5 inch 8 GB which is sutting down then restart unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions?

  I have an iMac (early 2013 21.5 inch 8 GB) which stops and then restarts unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions? I bought this machine this June last at B & H in New York.

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• When you type a query in the bar always double the third letter, for example, research, if I want to write a 'youtube' written "youutube" what to do, help

  When you type a query in the bar always double the third letter, for example, research, if I want to write a 'youtube' written "youutube" what to do, help

  Hello chilli.willi, try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• When I type a URL in the address bar does not open. How can I fix it

  When I type a URL in the address bar and try to open it using the mouse or by pressing the Enter key, that it does not open.
  I use Firefox version 34.0.5 OS is Windows 7 Home premium 64

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• When I type a name in the search bar Google using the classic homepage, nothing happens, it is to say, type the word BASEBALL, and then press ENTER, and nothing happens

  When I type a name in the search bar Google using the classic Home Page, nothing happens. By example, if I type the name of the BASEBALL and then press ENTER, nothing happens. This just started today.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• I can't stop firefox opening a new tab when I type a URL in the address bar.

  I have the ability to open windows into tabs and I love it. My problem is when I type a URL in the address bar, rather than load him on this page, it opens a new page. No matter what type of page I made this. When I CTRL + T to open a TAB, and then type in the address bar and it opens a new tab the TAB Leaving previous, I opened intact. I would like to just so that it loads the page on that I entered.

  You have this problem when running in Firefox SafeMode?
  A troubleshooting mode.
  
  You can open the Firefox 4.0 SafeMode pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu. Or use the Help menu option, click restart with the disabled... modules while Firefox is running.
  
  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox to open it again.

  If this is not the case, see this:
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

• I want to stop going to OpenDNS when I type a word in the url box. I want to go to google.

  I want to stop going to OpenDNS when I type a word in the url box. I want to go to Google.

  I changed the key word. URL to http://www.google.com.my/search?q=

  But this only works for the words by a space in there. For example:
  Type: "word1 word2" will go to Google
  Type: 'word' goes to OpenDNS

  In addition... If I type in 'eBay' it will take me to eBay.com (as I expect), but if I type in another site like 'tip20' he goes to OpenDNS.

  How can I fix this once and for all.

  Why you use OpenDNS as your DNS server if you do not want to use his services to redirect you?

  See:

  • http://KB.mozillazine.org/Error_loading_websites#DNS

• Anyone know when will fixed the problem of material with the "IPAD PRO"? The question that keeps it from starting after the load.

  Anyone know when will fixed the problem of material with the "IPAD PRO"? The question that keeps it from starting after the load.

  According to Apple, it has been addressed in the latest update of the iOS, iOS 9.2.

• The applicant type of window in the window of consultation of the client a model number will not accept it that

  Patiently, I try to enter data that will allow me to get a phone call from a support person about my problem with the camera three RX 100 model, which will not take a decent picture in the open air. All of the images appear dimmed. I tried to go through the computer section trying to get to a real person in the window asking the model type will not accept the type of model, it is tinted pink and will not accept the data. I'm very frustrated by the difficulties I encounter trying to get a conversation with a real person, that my phone number is 207-350-0201. Thank you

  Try 1-800-222-7669.

  I got this number on the Web site.

• Motherboard model H535 failure - the type of machine and the serial number invalid after replacement

  Does anyone know how to set the new Type of Machine and the serial number after a motherboard for a replacement model H535?

  The motherboard has recently failed on my model H535 (7 months after the expiration of the warranty - thanks, Lenovo). No local garage would agree to replace due to its nature of owners (thanks, Lenovo). I spent about four hours on the phone being bounced into back-and-forth between the many support staff (usually combined) Lenovo in sales, technical support, support of parts of IBM and various other departments (thanks, Lenovo), which one has suggested that I might have to try to find a motherboard on Ebay or Amazon for my computer in less-than-2-year-old. However, I finally get to someone at Lenovo, which has been able to sell a motherboard - for 2/3 of the cost of the original computer.

  Now, I installed the motherboard, and it works. However, during each boot, I get a POST with two beeps error which reads as follows:

  00CE error: Machine Type and serial number is INVALID

  Start of manufacturing sequence is taken if no selection is made

  I presume that the BIOS on the new motherboard must be programmed with the right Type of Machine and the serial number of my computer. I've read various things on the Internet about what to do, as updating the BIOS (I can not even find a BIOS under "downloads" of support for the H535 - thanks, Lenovo model), using WinPhlash (I apparently need one kind of BIOS ROM file to make it work, I don't have), getting a Lenovo hardware maintenance disk for my model (which apparently isn't available for other special people only me - thanks Lenovo), etc.

  The waiting time for Lenovo support are ridiculously long, and almost every customer support person is ridiculously uninformed on the difference between one of their computer models, and even less their motherboards (thanks, Lenovo). I am amazed and extremely frustrated. It shouldn't be rocket science.

  On a side note, I initially bought the computer from Staples with a credit card with extended warranty protection, which means I can get a refund for repair. Although the motherboard came with a packing list, no Bill has been provided by Lenovo, and I couldn't make them send one - or maybe even with success to explain what a Bill is (thanks, Lenovo).

  Well, Lenovo support was useless, and any alleged authorized suppliers were in fact still suppliers or could help with my problem. But I was finally able to fix it myself. Once I found the right piece of software, it has been fixed in less than a minute.

  My BIOS is by American Megatrends, and I discovered that they have a set of utilities that includes a called AMIDEDOS. It is intended for manufacturers to be able to change the strings of text stored in the BIOS for things like the manufacturer, product name, Version, number series, UUID, SKU number, family, etc., that is what I had to do. It is not intended for use by consumers, but it's there.

  When I ran the "DMIEdit.exe" program AMIDEDOS (clicked and ran as administrator from 10 Windows) and click on "System information" from the list, I saw "Product Name | STRING | Invalid' and ' serial number | STRING | NOT VALID ". The other fields appeared to have valid entries. I double-clicked on the fields valid and changed their "H535 model" and the serial number of my computer, respectively and then clicked on "Update all" at the top.

  Much to my surprise, he reported that he had successfully registered the new information. And, perhaps even more surprising is the fact that, when I rebooted, the double beep and the warning about the type of computer not valid and serial number have disappeared. In addition, the BIOS showed I had entered the new values, and the 'Manufacturing Boot Sequence' option (I understand can be much slower than a normal boot) had disappeared.

  Again, I'm a little surprised simple it was actually solve the problem once I got the correct software, or Lenovo part nor American Megatrends apparently offers to the owners, and it took hours and hours of research and research to understand. Use this information at your own risk, however, as playing with BIOS apparently can lead to problems not easily solved. That said, the modification of these text strings seems relatively safe.

  I will mention that I also ended up changing the method of "LEGACY" to "UEFI" boot in the BIOS after noticing that the selection.

• Can't type my password in the terminal

  

  Im just trying to patch MS Office, but when I want to enter my password, I can't type anything.

  This problem is with each Sudo cmd.

  Help, please!

  When you type a password in the terminal, he is still on the screen.

  Mac OS X: sudo command requires a nonblank admin - Support Apple password

  When you type the password of the user after the "password:" prompt, you won't see anything appear in the Terminal window. Just type the password and press ENTER. If the password is entered correctly, you will see the message "Sorry, try again" and he give another chance to enter the password correctly.

• read the type of variable and the value of LabView

  With the help of the TS. Class sequence that I try to get the type of variable and the values of local variables, parameter, fileglobal and stationglobal. Unfortunately I'm not able to find the right function. Hope someone can help me.

  Kind regards

  Lars

  Hello

  Maybe this simple TestStand example will help you.

  The API calls for LabView are the same...

  Hope that helps

  Jürgen