Types of stitching and massive cable USB-6259

Similar Questions

• Pavilion x 2 detachable 10-n123: cable USB of Type C on Pavilion X 2 detachable

  I bought a cable USB of Type C on Amazon to use with my Pavilion x 2. When I plugged the end of type A into a charger that I and the end of Type C in the 2 x led light white next to the USB port on the x 2 briefly flashed on and off.  When I plugged the Type a end on my desktop and the end of Type C in the 2 x I got the same result.  I tried another cable of Type C with the same result.  In one of my essays (I think it was plug the charger with the x 2 running) I ended up getting a message on the x 2 on the corruption of the BIOS and I had to go through a process using a Bitlocker code to restore the x 2 in working condition.

  The 2 x charge very well with all cable/adapter shipped with the x 2.  I want just an alternative.  I don't want to depend on a single cable.

  Two cables I've tried has received very positive reviews from other users on Amazon.

  The x 2 only works with the cables of Type C from HP?  Or something is wrong with my x 2?

  I realize that I just wanted to know if she would still charge after that.

  Also, in the Amazon reviews, there are lot of people having a similar trouble their features of loading with the version cable issues. It seems that there are compliance issues at the present time, manufacturers are still sorting.

  You can have one of these bad cables?

  Cable questions seems to replace the cables at the request of customers.

  Other than that, I can't tell you, it would be a total guess. I'm sorry.

• Create two independent signals and a pulse train with NI USB-6259

  Hi all

  I'm new to the forum, I searched but I've found no info about it.

  I have recently set up a vi that is able to generate from an NI USB-6259 case two different signals in frequency, amplitude and phase (see attachment).

  To do this with each cycle of the memory buffer size is changed accordingly for frequencies in order to see a whole number of periods and, thus, having not leak in the generation (or breaks).

  Now, I would like to generate a pulse train at a frequency that is an integer multiple of the frequency of the input signal (not the 50 Hz one).

  The resulting frequency of the pulse train could be changed on the fly (or at least be updated at each new round of vi).

  I'm stuck because I have already said that two analog output channels and I want the pulse train so that a digital camera for my Board (channel PFI) output, you have any ideas?

  Thank you very much

  Alberto

  PS. the vi is "program generazione.vi" but you must first install "signal.vi production".

  Hello
  It is a simple .vi which generates a configurable, buffered pulse train dynamically. I also want to let you know that with this type of advice (DAQ), it is impossible to update the output in real time. You must be careful because the time between you use "DAQmx Write" and the output effective physical change not IS NOT FIXED.

  Kind regards

  Matteo

• How can I load the images down from my Camers via cable usb and foxfire

  I do not have a place to put a camera chip in my computer and I want to download my pictures from the camera via cable usb with fire fox

  Firefox can not be used to import files from a USB, card SD or other external storage device. Firefox is a Web browser for viewing and downloading content on the web.

• When I connect the USB and LAN cable does not my trackpad

  Hey guys how are you.

  When I connect the USB and LAN cable does not my trackpad

  How can I fix this error. Please teach me.

  Which macbook model do you have?

  a USB mouse still works?

  your keyboard still works?

  No matter which USB port you use?

  No matter what USB device allows you to create this error?

• The channel numbers and the USB-6259 BNC

  The front panel USB-6259 BNC labels BNC connectors as channels 0-7 and 16-23. Most odd... I have a software written in C++ using NOR-DAQmx that my client will try to use with this unit. When using the channel superior numbers he (not unusually, really) Gets the error-200077 saying that they can only be used in unbalanced mode. But it is not natural for him to use the channel numbers printed on the front of the unit.

  Can someone tell me how the front panel of this device is the channel numbers, you must specify in the code?

  This requires the switch (source of the source/grounded) floating FS/GS that appears under each BNC connector?

  Here's my proposal: differential mode: in the software, channels 0-7 are front channels 0-7. Software 8-15 channels are front 16-23.

  Asymmetric mode: software channels 0-7 are cover 0-7 and 16-23 software channels front 16-23. And 8-15 and 24-31 channels are absent...

  It takes just the opposote of what you have. In differential mode, aix is paired with aix + 8. so, ai31, ai9, AL10, ai11, ai12, ai13, ai14, ai15, ai24, ai25, ai26, 27, ai28, ai29.ai30 and ai8 channels are not available for selection in differential mode. Front panel for ai15-23 labels should be correct and matches what you select in the software.

• Communication problem between LabView and acquisition of data USB 6259

  I want to monitor a data USB-6259 acquisition using LabVIEW 8.6. However, when you try to create an explicit task (using the DAQ assistant) in order to acquire a signal, I get the message asked supported device found¨. I can see the USB-6259 under ¨Devices and interfaces¨ to the MAX, but when I try to import the configuration data for NOR-DAQmx 8.7.2 in MAX, I get the message ¨Can´t import file configData.nce.  File not found¨. I use NEITHER-DAQmx 8.7.2.  Any suggestions?

  Corneliu

  Hi, Corneliu,

  This question could be generated due to a corruption of database of MAX. Here is a link to restore the database to the MAX.

  http://digital.NI.com/public.nsf/allkb/2C7480E856987FFF862573AE005AB0D9?OpenDocument

  Just follow the steps and let me know if that solves the problem.

  A greeting.

  Jesus.

• Bad drift with USB-6259 devices and acquisition of data PCI-6259

  We have both a USB-6259 and PCI-6259 installed on a single computer, linked to a SBC-68, with Matlab and Toolbox of data Acquisiution.

  For the purposes of test base, I wrote a script that generates a sinusoidal signal output based MATLAB, for a single DAC output.  I wired this single DAC output to two channels of ADC of entry.  For each sample output DAC, the script also takes a sample entry of ADC on each channel.

  --> Ideally, if everything works correctly, after you run the script, I see two channels of input ADC vector.  Tracing of each channel should give me a nice sine wave in Matlab.

  --> When I made trace data, here's what I get (see attachment).

  -->, I looked at the DAC output with an oscilloscope, and the DC offset is very close to 0 (this indicates to me that the part of output DAC works very well).

  Why is there this negative DC drift on two entries?

  Forgive my lack of knowledge - I know the difference between the DIFF and CSR connections, but I don't know where is the 'setting' for DIFF/CSR (what is a button/switch on the USB-6259 case?  Is it a software control in the code?)

• Computer behaves as I am repeatedly connect and disconnect a usb cable or external device

  He repeated the beep you hear when you plug or unplug a usb cable or HDMI cable. When I look at the menu device it flashes right after each beep or ' bump ' sound. It is not random and continuous, like clockwork, every two seconds.

  Hi thanks for the reply. I found that I had an SD card in the SD port. After having disconnected and blow the USB drives, the problem has been resolved.

  Thank you

• How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?

  I want to integrate the ANSI C sample program ReadDigPort - ExtClk.c in my own big package.

  I want to use the internal clock of the BNC NI USB-6259 (.. 80 kHz 120 kHz).

  In the document:
  High speed M: Series Multifunction DAQ for USB - 16-bit, up to 1.25 MECH built-in BNC connectivity. / s,.
  is written:
  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?
  With what other subsystem on the device can generate a source of the clock? How?

  It is possible to set a clock on an internal counter (for example ' Dev1/ctr0"):
  Creates channels to generate digital impulses that define the freq and dutyCycle and adds the channel of the task that you specify with taskHandle.
  DAQmxCreateCOPulseChanFreq (taskHandle, "Dev1/ctr0" units, clockName, idleState,
  initialDelay, freq, the duty cycle); works

  But it is not possible to drive this internal clock to a terminal (for example "/ PFI0/Dev1"):
  DAQmxErrChk (DAQmxCreateCOPulseChanFreq (taskHandle, "/ PFI0/Dev1", clockName, units, idleState, '))
  initialDelay, freq, the duty cycle); does not work: error DAQmx: measurements: type I/O of the physical channel does not match the type of I/O required for the virtual channel you create. Name of the physical channel: PFI0. Name of the virtual channel: clock

  The sample clock source can be derived from an external terminal (for example "/ PFI0/Dev1"):
  Sets the source of the sample clock, the sample clock rate and the number of samples to acquire or generate.
  DAQmxCfgSampClkTiming (taskHandle, "/ PFI0/Dev1", maximumExpectedSamplingRate, DAQmx_Val_Rising, ")
  DAQmx_Val_ContSamps, bufferSize); works. Acquire or generate samples until you stop the task

  But it is not possible to derive the internal counter of the clock (for example ' Dev1/ctr0"):
  DAQmxCfgSampClkTiming (taskHandle, "Dev1/ctr0", maximumExpectedSamplingRate, DAQmx_Val_Rising,
  DAQmx_Val_ContSamps, bufferSize); does not work. Error: Acquire or generate samples until you stop the task: make sure that the name of the terminal is valid for the specified device. See Measurement & Automation explore valid names of terminals. Property: Property of DAQmx_SampClk_Src: DAQmx_SampClk_ActiveEdgeSource device: Terminal Source Dev1: Dev1/ctr0

  Hi datafriend,

  using what it says is correct:

  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  This means that if you do not use an external signal as clock you can use the sample clock to HAVE it on board or at the output of the internal counter.

  There are also 2 ANSI C examples in this regard:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4485

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4488

  So in both cases you have to use a fictitious task you need only for the generation of the internal clock (HAVE or CTR)

• NI USB - 6259 BNC DAQ: analog input signal cross on the question

  Hello

  I use the NI USB-6259 BNC DAQ unit to acquire a four-channel analog signal, and I'm having a problem with a signal that affect others. The circuit, I am running is:

  I have a wire connected to a battery (two AA batteries at ~1.5V), which then feeds the signal cable to a BNC cable, which feeds an analog BNC of data acquisition channel. The field of NBC feeds to another wire, which is attached to a conductive plate.  The idea is this: when I touch the wire connected to the battery for the metal plate, I complete the circuit and thus get a binary not anything at all about 3V.  When I tested with an osciloscope using two channels (each earth connection to the metal plate) I get independent steps whenever I touch any of the sons of the respective batteries to the metal plate (i.e. it works as expected).  However, when I use it with data acquisition, whenever I touch a wire, I get a response in all other channels (3 others), even if their respective sons does not touch the metal plate.

  No one knows why this happens, and how I might be able to stop this 'cross-talk '?

  Thank you

  Veritas

  I see, and you're right.  This request will have trouble with crosstalk.  Luckily the ground channel thing should help you.

  Configure your DAQ to collect twice as many channels as you need.  Connect your wires in the odd channels and short circuit (ground) the entries of those even.

  Now when you scan the channels it will always technically crosstalk, but it will come from a channel to the ground so that there will be nothing to interfere with your measurements.

  At least that's the theory.

• Cable USB microphone blackBerry Smartphones

  The 8900 use a different cable than my 8800, a micro-USB cable.  Unfortunately, it is too short.  I want to order a longer cable, but it turns out that there are two different micro-USB cables: USB-mic-A and B-Micro-USB.  I looked through and have tried everything I can find.  Does anyone know if it is A or B?

  TIA

  I hate the fact that I can no longer connect anywhere with the old mini-USB port. But I have no power over those decisions...

  My 8900 uses Micro USB Type B cable, so I guess that yours also. I've included a link to a picture showing the different types of USB. The left is mic Type b.

  Comparison of USB

• Data cables USB QA1 Karma

  Does anyone know why we have to buy the Tools CD to use with a USB cable to transfer data from the phone on PC? The book does not have to, but when I try to find one, a microUSB, and put my phone type in, I thought he must have the Tools CD, [about $50], to make it work. Is this true? I would like answers or suggestions that anyone could have.

  Thanks in advance.

  You got me curious so I tried an experiment.  I installed the USB driver 32-bit from the link I posted above on the machine Windows XP from my wife.  It does not have a TPM, and I did not install MPT.

  After installation of the USB driver I plugged my Karma to a USB port.  Karma has been recognized and in a few seconds, it was installed and Windows popped up a box asking what I wanted to take.  I chose to use Windows Explorer and that was it.  I've been in.  I could see all the files on my microSD and move files back on the PC hard drive microSD card.

  So there you have it... the good cable USB and the USB driver free Motorola and you can transfer files to/from your QA1.

  Good luck.

• 57nr 6B dv7: what type of power button Board cable I have

  I'm looking for what type of power button Board cable I have I need a new replacement

  Hi @DarknesReasz,

  Thanks for posting HP forums! I read your post and wanted to help.

  I understand that you are looking for a replacement power button Board cable.

  I found below on Page 36 of the Pavilion dv7 Maintenance and Service Guide

  

  You could search the part number on the link of the HP parts store.

  Let me know if theses help to resovle your issue

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• Configuration of the XBR-65x850c channels - I put the type of signal to the 'cable', but he always comes back to the "antenna".

  I have the TV signal by cable from the TV directly to the output - without cable box.

  Under 'Configuration of the strings' / 'Type of Signal' I choose "cable."

  The works of TV and I watch cable TV.

  I'll be back later in the day and the parameter 'Type of Signal' has changed to 'antenna' and I can see is more channels.

  I change it back and it works until the next time I try to watch TV when I find that it has changed again.

  Someone knows how to keep permanently the setting on "cable"?

  Thank you!

  This problem has been fixed with a recent update.