Computer behaves as I am repeatedly connect and disconnect a usb cable or external device

Similar Questions

• I use Windows 7 on a computer to which a printer is connected directly by a USB cable. I am able to print, but cannot find the printer when I run control/devices and printers Control Panel

  I use Windows 7 on a computer to which a printer is connected directly by a USB cable.  I am able to print, but cannot find the printer when I run control/devices and printers Control Panel. In fact, no devices appear at all.

  Can someone help me with this?

  Thank you.

  See http://www.winhelponline.com/blog/fix-devices-and-printers-completely-empty-windows-7/

  If this does not help, there is a very long thread here, which may include other suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/devices-and-printers-dialog-box-empty/353707a4-bcb0-4334-98bc-aab84747fecd?page=1

• My computer is very slow and takes a long time to connect and disconnect

  Original title: sign out of questions

  My computer is very slow and takes a long time to connect and disconnect. Sometimes I hit Logoff button and do not forget I have more work to do... is it possible to cancel the newspaper once it starts, or should I just wait what he log out completely and then reconnect? (It takes just forever)

  Install the background file. See if it suits it

• USB Foot Switch triggers them connected and disconnected a beep

  Scythe USB Foot Switch Triple is originally the connected and disconnected beep continuously causing spike lag on my computer. Was started when I downloaded the Logitech software G600 Gaming Mouse on my computer. The pedal is showing as "usb composite device" on my device manager with an exclamation point. When I remove the Logitech Gaming Software the exclamation mark disappears and no beeps.

  Scythe USB Foot Switch Triple is originally the connected and disconnected beep continuously causing spike lag on my computer. Was started when I downloaded the Logitech software G600 Gaming Mouse on my computer. The pedal is showing as "usb composite device" on my device manager with an exclamation point. When I remove the Logitech Gaming Software the exclamation mark disappears and no beeps.

  You must contact probably two manufacturers (Logitech and false) to try to understand if there are newer versions of drivers and known issues.  They can work with you to resolve this conflict.

  A quick look indicates that you'll probably have more luck with Logitech that fake.  :-)

• What is the effect of the "signature of all other computers or devices?  This remove the software from these machines or simply make it unavailable until this as connected and disconnected (e) other machines used CC on?

  Connect failed

  Impossible to sing in on this computer or device.

  The Adobe ID [email protected] has already been used to activate the software on two other computers or devices.

  0 - retry.  I've already signed out of one of them.

  0 - you sign out all other computers or devices.

  What is the effect of this action? @

  just make it unavailable until this as connected and disconnected (e) other machines used CC on?

  That's exactly what disconnect only. No software is removed or otherwise affected on your computer.

  See error 'activation limit reached' or 'connection failed ' | Adobe products

• How to check the details of connection and disconnection of the team? I want to see the rate of use of the software.

  How to check the details of connection and disconnection of the team? I want to see the rate of use of the software.

  Hello

  I'm sorry but there is no option for monitoring the connection and disconnection of a user.

  You can see their activation of license through your admin console.

  Kind regards

  Sheena

• connection and disconnection in adf

  I want to complete step by step tutorial to build the app that has facilities of connection and disconnection. and also I m using bounded task flows with the train.

  Hello

  There are various sources to try:

  To help you get started

  Oracle ADF Security Overview - Oracle JDeveloper 11g R1 and R2

  For an example

  Oracle ADF: Security for all the world

  In addition, the product documentation reading is logical

  http://docs.Oracle.com/CD/E28280_01/Web.1111/b31974/adding_security.htm#BGBGJEAH

  What you can't find in these three sources, let us know.

  Frank

• Office Jet 4620: Connect wireless printer without USB cable

  I have a desktop HP 4620 jet.  He was hanging in my old router.  When I tried to join software router again asked me to use a USB cord.  I do not have a such cord for this printer and want to set using the wireless, but sofeward me continues to send at the option of the cable.  The router is ATT U-verse.  I need step by step instructions on how to connect the wireless printer.

  Thanks for any help.

  Hello

  HP Auto Wireless automatically sets the printer without connecting it to a USB port, only if your computer is also connected wireless to the network. If your PC does not have wireless connectivity USB cable would be necessary, except if your router supports WPS.

  If your PC is connected wireless to the router, restore the pritner as follows:

  1. Click on the WiFi the printer button and select restore network settings, confirm and invites.
  2. Click on the Setup (wrench) and select Tools, then restore the default settings and confirm any command prompt.
  3. Turn the printer off and turn it back on
  4. Open the HP Officejet 4620 software and follow the instructions to connect a wireless printer.

  Another option would be the WPS Pin Code or button WPS, if your router supports supported such a, tap the icon on the printer wireless and select WPS or Wireless protected Setup, follow the steps on the screen, press the button of your router or a PIN code, see the documentation for your router to check the capabilities of WPS.

  If none apply to your PC printer or yout, use a wireless computer connected or get a USB cable for the installation of hht, so a cable was supplied with the printer.

  Kind regards

  Shlomi

• My Sprint HTC Android mobile phone connects with the supplied USB cable, but the computer says 'No HTC Device Connected'

  My Sprint HTC Android mobile phone connects with the USB cable, but the computer says 'No. HTC Device Connected' so I can't sync...

  Hello

  1. do you have HTC Manager installed on the computer?

  2. have you tried it with different USB ports?

  You need the HTC Sync HTC phone Manager software.

  Method 1: Try again with different USB ports and see if that helps.

   

  Method 2: If HTC Sync is installed, if you get the message "no device connected" in HTC Sync, ensure that your phone USB setting is changed to "Charge Only" to "HTC Sync".

  If the methods above do not help, you can contact HTC for additional help.

  Here is the link: http://www.htc.com/us/support/

• Device connect and disconnect sounds play when NOTHING is connected!

  Hello

  I am running Windows Vista x 32 on my Dell Inspiron 1525. The problem is that the device connect sound, immediately followed by the device disconnect sound, playing intermittently even when not a single device is connected. I have already extracted 1 million solutions online, and here's what we can exclude:

  • Still, she does when no devices are connected, so it is not a loose USB device.
  • Does it by chance; I can't predict when the sounds will play, and there is no evidence in the event viewer I can link to this problem.
  • My laptop does not have Bluetooth, so it's not just trying to pick up a network.
  • I've updated all the drivers I can think and who has been recommended by others. They are all to date. I have also each service pack installed.
  • It is a customized, sound scheme so that these sounds are ONLY related to the device plug or unplug, respectively. I even went through all the sounds in the profile just to make sure I didn't accidentally double up.

  The only other thing relevant I can offer is that I actually just sitting there waiting for the sounds to play while looking at the Device Manager. I got all the closed lists, and when sound plays, the "network adapters" list opens. Yet once, I checked to make sure that all of these drivers are up to date, but it still plays. Please help, I'm going crazy! Thank you in advance!

  BTW, even if I can put up a good show to know what I'm doing with a computer, I'm not that well versed in techno-parler, please dumb down your solutions. Thank you. :-)

  Hello

  That description makes it sound like the issue is a network adapter that is enabled - right click either the
  Interface NETWORK (wired) or peripheral card WiFi and turn OFF - which ever you use and see if the noise persists?
  I look in Device Manager is a good idea.

  Is it a PC or a laptop - card integrated or add-on/in? If a PC off ALL power and remove and reinstall
  all cards and cables on both ends (in fact, remove and replace - do not just tight). Not much, you can
  do this with a laptop, unless WiFi is external but for PC or laptop, you can turn off the edge
  WiFi (if she has that) and use an external device.

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• Printer constantly connects and disconnects HP Photosmart C7280

  My Photosmart HP all in one C7280 printer is constantly plugging and unplugging. I recently started using my Ethernet connection instead of my wireless connection and that's where the problem started. I've already changed my IP address to a static IP address outside DHCP rang - did not help. I also ran the HP diagnostic utility and it just all right. How can I get my printer to stop the endless cycle of connects / disconnects?

  The printer does actually unplug (her changes of IP address of 0.0.0.0 or 169.254.x.x) during this time, or your computer can't find it?

  Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?

• S10e - loud beep on AC connect and disconnect!

  Hi everyone - first post here!

  My Lenovo S10e supplied with Suse Linux Enterprise Desktop, and it works now openSUSE 11.1. I love it! But I'm always in the first weeks congested and still working on the kinks. And here's one:

  Every time I have connect or disconnect the AC, I get a very loud beep, which is a real nuisance in the library, and even around the House! I'd love to be able to disable the beep, but as far as I can tell it is a level BIOS setting BIOS give no option to adjust.

  All the forums I've found offer a solution only for Windows. If there is an update of the BIOS, which makes it possible to disable the beep, I think I wouldn't be able to apply it in any case, since it would be distributed in the form of a windows .exe. But I bought the device with an operating system Linux is preinstalled. Surely, there must be an upgrade of the BIOS that come to us?

  Anyone have any suggestions here?

  Thank you very much!

  
  

• HP Envy 100 stay connected. Back to usb cable how? (Mac OS 10.5.8)

  I'm on a Mac (OS 10.5.8).  I just changed USB cable and wireless two days ago.  Everything was fine my Envy 100 D410e printing.  Today, it does not print anything - says it is not connected, but my diagnosis network says it all right.  So I would go back to using my USB cable.  How do I do that?  [One of the suggestions in the forums for this issue, I've seen offered a download 'fix' it was a .exe program.]  UH... for a Mac?  This is why I want to go back with a cable.  It is therefore not worth.]

  You respond once AGAIN to my own post... :-)
  I decided to uninstall and reinstall without going through
  the wireless configuration. I am now to USB
  mode and I'm happy. Wireless problems
  I read on the forums make me sorry
  I bought a wireless printer. Oh, well, I'm printing
  Once again!

• After running System Restore my computer asks for a password when connecting and I don't remember the password.

  I am running Vista Home Premium on a laptop Toshiba Satellite L305.  I ran the system restore due to a problem of "Internet Explorer cannot display the website" (by Microsoft troubleshooting guide for this problem) and selected restore point earlier.  Now the computer asks for a password that I don't remember.  I tried all the possible passwords I can think.   There is only a single user account on this computer.  The administrator account should be disabled, it is not an option when connecting safe mode.  I don't have a system repair disc set.   Is it possible to run the system back restore to select a more recent restore point which does not require a password?  Or y at - it another way to connect to the computer?

  http://Windows.Microsoft.com/en-us/Windows-Vista/undo-system-restore

  If you tried to use the system restore to solve a problem, but the problem remained or other problems were introduced, you can undo the restore operation. After you cancel the system restore, you can try using a different restore point.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Mick Murphy - Microsoft partner

• My computer says I have an internet connection and I can play games online but I can't access any Web site using any browser.

  I have reset my DNS. I tried just unpluging my router and the pluging again as windows troubleshooting says.

  I'm connected using a Wi - Fi connection. my laptop works fine so it isn't my router. my computer is new and is not a virus.

  Hello

  1. is the problem solved?

  Please answer is back with the status of the issue to help you further.

  Thank you.