U verse remote or codes?

Similar Questions

• iPhone 4 has a scrambled screen. Can I enter remote access code?

  I gave my child my iPhone 4 when I upgraded. He had the newest iOS available for the 4, which I think was 7.1.2 or something close. before I gave it to her, I restored to factory settings and deleted all the files. She created a new password and it used for music and photos. She doesn't have it synced to a device or stored in iCloud. It worked perfectly when I gave it to her. A few days earlier, she dropped and now the screen is scrambled and bring up the screen to enter the access code. I plugged it to my MacBook to see if I could get behind the scramble but I just got a message that the photos cannot be downloaded without unlocking the device.

  - SO my question is, is it possible to enter this access code other than to type in the phone itself? Some behind the scenes where I can enter the code and go to the photos and music living in the unit? This phone has a removable SIM card.

  Grateful for any help you can give me.

  mactwisp wrote:

  - SO my question is, is it possible to enter this access code other than to type in the phone itself?

  No, it isn't.

  I hope that "photos and music living in the unit" were backed up when the iPhone was iTunes or iCloud.  If not, the only hope would be to take the iPhone to an Apple Store or Service Center authorized Apple and determine if it is fixable (very unlikely, in my opinion).  If it's fixable, great.  If this is not the case, the material on the iPhone is lost.  (Note bought from iTunes music can be re-downloaded iTunes on a computer or an iOS device different.)

  For later use, the iPhone should never be the main housing for music not bought in iTunes.  Also, of course, photos taken on an iPhone that are worth saving must be saved.

• Cannot get Windows Media Center to learn the remote control codes decoder

  I'm trying to put in place my TV card in Windows Media Center in Windows 7.  The card is a Hauppauge HVR 2250, which has a blaster/IR receiver.

  The configuration of the set-top box tells me to point the remote at the receiver and "hold" the number 0.  The problem is that the remote control supplied with the set-top box (Motorola RG2400) is not constantly emits the same IR signal when I press and hold the button - signal IR lasts only about a year and a half seconds before turning off. This does not seem to be sufficiently long for Windows Media Center and never detects the signal.

  Can I make it work?

  Hello

  Looks like the remote is faulty I recommend you do replace from the cable/satellite for a replacement/repair provider.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot connect remotely ASA5505 on code 8.0.5

  I have 2 ASA5505 firewall deployed, 1 in the data center (code v8.0.3) and 1 at a remote site (code v8.0.2).  Remoteness has 2 PCs that connect to the data center to access services directory, file servers, Exchange, etc.  ASA5505 firewalls are configured for a site to site VPN.

  We had problems of stability with the ASA distance we decided to upgrade the code first.

  We have updated the data center 8.0.5 and everything was fine.  I have given me flows and that I could enter the two ASAs since the data center via ASDM and ssh.

  Then I updated the remote location 8.0.5.  Now, I can't ASDM or ssh to ASA unless I am at that location.  PC are always able to connect to their servers.

  I can't do a ping, telnet, ssh or ASDM inside vlan ip address while I'm at the other site.  I see in the newspapers of being built on the distant firewall incoming connections, but it is not creating a new outbound connection to the movement of the answer.

  8.0.5 did something to block connections to management from outside?

  It is an odd, thanks for sharing the solution!

• What are the codes for my Magnavox TV remote

  I don't find remote control codes for my magnavox tv to my bdpbx110. Can anyone help as I can't seem to get the cat to support at work.

  Unfortunately, the Blu - ray remote has no channel key, so it is not possible to change the channel using the supplied remote control.

• Lost iPhone 6 and would like to change current password remotely

  I lost my 6 s IPhone. I have a code to access very easy to guess and I fear that someone may have and be able to unlock it! I already have lost mode. It does not appear that he is still on. Is there a way to change the remote access code?

  Start with these links.

  If your iPhone, iPad or iPod touch is lost or stolen - Apple supports

  Change your Apple ID - Apple Support password

• Microsoft Media Center remote with pace DC50X 1039, Setup box cannot change channel

  Can I use Vista Media Center to record only TV etc...
  Recently I had to use a configuration of Comcast Digital adapter carrier (DC50X) in order to get access to the channels.

  Vista recognize the Remote Setup Box, but it is not able to change the channels of the Remote Microsoft.

  On this page: http://mythtv.org/wiki/MCE_Remote I have the 3rd remote from left to right.

  I contacted PACE (the author of the configuration box) with the following response:
  ". The DC - 50 X uses a new remote protocol called XMP. Check to see if it can emit IR codes using the XMP Protocol.
  "If you use Microsoft remote issue codes using the XMP Protocol, it will not work with the DC 50 x"

  Anyone know if Microsoft Remote is able to use the XMP?

  Someone knows how the Media Center as the configuration box to change the channel?
  It looks like, it uses IR (due to the extra step of IR with the configuration box).

  If you have a WMC working with the DC50X, what is your Setup, what version of the distance, whats is your hardware configuration?

  My tuner (Hauppauge WinTV-PVR-500) can see the image, the sound is fine.

  Any help would be much appreciated.

  Deckard6, please see the Microsoft Hardware site:
  http://www.Microsoft.com/hardware/default.aspx

  Also try:
  Remote control for Media Center PC with Windows

  We can help you with Vista related components, if you feel that your Media Center software configuration is at fault for what you are experiencing, then we can try wrong turn, however, if it is indeed the remote transmitting Protocol, then it is not in our support framework. Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Preview screen responsive DW CC 2015 QR Code feature is a bad bad thing

  Hello

  I've just updated to 2015 CC DW and try to work on a sensitive layout.

  Why oh why that now become a thing of QR code? How can I get it from the old way of looking at phone, Tablet and views of PC?

  The thing about QR does not work as it does not show any of the images in my design.

  You cannot not thought a new worst feature do DW very difficult to use when doing the sensitive presentation.

  I really need to scan each page layout in DW. Not on some remote QR code that cannot access the images for the design.

  I hope it changes back soon...

  I find overview device (what you call the 'QR code thing') very useful and has never seen any problems with it not to display images. There may be something unusual about your installation program that prevents the display images. Are the images on a remote server?

  However, you can easily view your page layout in Dreamweaver. Simply open the menu window size by clicking just to the right of device icon preview in the status bar at the bottom right of the Document window.

  

  If your page uses inquiries, you can also quickly resize the Document window by clicking the bar of Visual Media Queries at the top of the screen:

  

  Personally, I think that these options are much better than three icons that have been hardcoded for arbitrary fixed sizes. The bar of Visual Media Queries responds to media queries that you have defined, and the menu window size can be changed. To add or remove values in the menu, click on change sizes. This opens the preferences panel and select the category of window sizes. Use the button "+" to add new heights. Don't forget to click apply before clicking Close in the preferences.

• My redemption code does not have to access my serial number

  I bought Acrobat Standard... returned from the store, and they are listed in the redemption code for access to the serial number.  I am told that it is not valid

  Make sure that you use a letter O and not a number 0 - or vice versa - if any code

  Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

• How can I update the firmwar in the tv 48T5445DG?

  Hallo,
  According to Overview_direct_updates_for_end_customers_worev.pd f, I downloaded yesterday, the latest firmware for my Toshiba 48T544DG is Version 3.6.3c.
  By TV now has:
  Softwareaktualisierung V.3.6.0.b
  SoftwareVersion V.3.3.6k
  I tried pressing the button OK on Softwareaktualiserung, but he told me, that software is up-to-date.
  It does not try to update on the Astra satellite.
  I also tried on the portal page, but did not find any option to update the firmware.

  So my questions:
  s ' Please explain step by step on how to upgrade the firmware
  -What are the parameters of sat/transponder update by Sam currend?
  -would be even better, if the update would be possible by download and USB
  -It would also be good to know what has been fixed.

  Main reason for me to update the firmware, is that the remote control react also on order remotely from other devices. For example, sat-receiver and amplifier. Here are other manufacturers. Thince each manufacturer shall forward its own specific code, it seems to be a bug in the TV. (Regardless of manufacturer - a part of the signal of the remote control code). I hope that this could have been fixed.

  Hallo,
  According to Overview_direct_updates_for_end_customers_worev.pd f, I downloaded yesterday, the latest firmware for my Toshiba 48T5445DG is Version 3.6.3c.
  By TV now has:
  Softwareaktualisierung V.3.6.0.b
  SoftwareVersion V.3.3.6k
  I tried pressing the button OK on Softwareaktualiserung, but he told me, that software is up-to-date.
  It does not try to update on the Astra satellite.
  I also tried on the portal page, but did not find any option to update the firmware.

  So my questions:
  s ' Please explain step by step on how to upgrade the firmware
  -What are the parameters of sat/transponder currend update satellite (Astra / Hotbird)?
  -would be even better, if the update would be possible by download and USB
  -It would also be good to know what has been fixed.

  Main reason for me to update the firmware, is that the remote control react also on order remotely from other devices. For example, sat-receiver and amplifier. Here are other manufacturers. Thince each manufacturer shall forward its own specific code, it seems to be a bug in the TV. (Regardless of manufacturer - a part of the signal of the remote control code). I hope that this could have been fixed.

  Thanks for your help

• LabVIEW host could not download my_subvi.vi Labview 2009

  My problems started with the jump in Labview 2009. When I try to deploy my project during execution of the façade on my host and the remote control code, I get:

  Host LabVIEW cannot download my_subvi.vi. "my_subvi.vi" is a random under vi of the project. It can be different every time. This happens to my RT PC and so far not for PXI box.

  After talking with OR I downloaded the 2009 SP1 update and all other updates to run the RT kernel to version 9.01. I've updated the remote computer does not change.

  I also did a little test. I can run a simple empty code as a moment of pure looped and that is fine, but when I add a Subvi it gives me the same error each time.

  I have a quad core 2.4 GHz with 4 GB of RAM. A lot of memory and time processor. I used to run it with 8.2, 8.5.1 and had no serious problems.  My RT PXI seems to be good so anyway...

  Ideas?

  After talking to the consultant NOR I found the solution.

  It's all just stupid but works. I removed the second stick of memory - I have 2 + 2 GB of RAM; It works now. LabView RT apparently has problems with address more than 2 GB of RAM. I wonder if it has something to do with memory dual channel or not. What happens if I had 4 + 4 GB memory - would I have to buy 2 GB mem?

  Oddly enough, it was working fine with this configuration under Labview 8.2, 8.5, 8.6 and stopped at 2009 and 2009 SP1.

• Cannot connect to AT & T UVERSE installation to media center windows 7

  Try to set up ATA & T UVerse box configuration of Windows 7 media Center. Setup is not going thru. This isn't beyond saying IR, display of learning... Any help

  Hello, ChaCol

  What happens on the screen of infrared learning? If it does not recognize the remote?

  Some users have reported success learn the remote control codes as follows:

  On the learning IR screen, hold the remote control to the IR receiver. Keep the number, raise the remote to the receiver until it says "Release to continue button" then it away from the IR receiver. Hold down the key.

  Make a minimum of two times until she is ready for the next button. If it takes more than 4 times (try an entry and confirm a try), then make sure that the remote control is not in the line of site of the receiver until the button is pressed for a second, and that when blocked to the receiver, it is no more than three inches from him.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

  Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

  I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

  Ron, I have something for you!

  and for all the people who have this problem :)

  Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

  Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

  The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

  Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

  My TV works and looks okay now.

  It actually works!

  the only problem is that it is not in HD

  but there is something

  
  

• port of victim GIS 1300 46823

  Hello.. my ID is picking up traffic to a mail server, attacking the 50084 port / port 46823 victim. Because the ports are the two it does not resemble legitimate traffic to higher order. How to continue to define this traffic?

  I found this online: based on the stack buffer overflow in Sielco Sistemi-Winlog Pro 2.07.00 and earlier, when the server running TCP/IP is enabled, allows attackers to cause a denial of service (crash) and execute remote arbitrary code via an opcode 0 x 02 designed for port TCP 46823.

  But this system is anywhere on the network.

  Thank you.

  Alerts of 1300 of signature on the manipulations of TCP Segment, do you mean you see this signature light?  Details of the traffic that it will warn on can be found in the link below:

  http://Tools.Cisco.com/Security/Center/viewAlert.x?alertId=1160

  To classify the traffic to the port 46823 further you will need to get a traffic capture (such as through a traffic program like Wireshark, or through capture port mirroring).  A traffic capture would allow you to see whether there is malicious.  Even if you don't have a 'Sielco Sistemi Winlog Pro' system on your network always be victim this malicious traffic in your network somehow.

• Windows 7 media center can control a Fios (motorola QIP-6200-2) decoder?

  Hello

  I have windows 7 Ultimate 32 bit, and I try to get media center to control Fios box.  The decoder is a motorola qip-6200-2.  All control codes for motorola 17 tried, without success. Have also tried the automatic configuration using the remote to fios. Hving Media Center learn the remote control codes were not working.  The ir blaster/receiver works correctly, it flashes red when I try the contol codes in media center.  It is posistioned of materials on the decoder.

  Any help would be greatly appreciated.

  Hello
  Thanks for posting your question in the Microsoft community forums!
  
  I recommend you to run the TV Tuner Troubleshooter and check if this solves the problem.
  
  Reference:
  
  Open the set up TV tuner Troubleshooter
  http://Windows.Microsoft.com/en-in/Windows7/open-the-set-up-TV-tuner-Troubleshooter
  
  If this doesn't fix the problem, answer to us for further assistance.