U2414H, display port problem

Hi guys, so I just bought U2414H for my rig to play with graphics card AMD Radeon MSI R9 390 8 GB memory GDDR5 512 bits with 1 DisplayPort, 1 x HDMI, 2 DVI - I. My problem is, when I connect miniDP to the monitor (which is only a miniDP) to (DisplayPort) my graphics card, AMD Radeon MSI R9 390, but it only goes to the power save mode. I can't access same monitor configuration. I already change the input source to the port of mini-affichage on the screen. but it still saying no mini display port.

So, help me please.

Hi Chris thanks for the reply, apparently my problem is solved, the main problem is that I plug the 2 x 6-pin power for graphics card, haha. Only, I have attached the graphics card to the motherboard.

: D

Tags: Dell Peripherals

Similar Questions

  • Spectrum of HP - MINI DISPLAY PORT PROBLEM

    Good evening, I'm Mattia, I have a HP spectrum 13 ultrabook; It has a mini display port, as the macbook, so I bought a mini display of sample of cable vga port to connect my ultrabook to my vga monitor 19 ". The problem is no signal in the company of Eve. Is there anyone who know the cable that should work?

    The cable I buy and the seller told me it should work:

    http://www.eBay.it/ITM/320935563726?ssPageName=STRK:MEWNX:it & _trksid = p3984.m1439.l2649

    Thank you all

    ML

    It nuovo e love cavo e funziona! He first che era stato dato era rotto e! Problem solved, grazie thousand per aiuto e per i consigli

  • U2414H, Display Port issues

    I have 2 of these monitors. I initially tried daisy chain on my Radeon card which is supposed to support 8 of these monitors on DP.

    It must have taken me 2 hours to get their work, I had to connect each one in the port of DP on the ATI card. It was on Windows 7, it worked for about 8 months.

    Sometimes, however, when the PC is out of standby or sleep, monitors went all mental, I figured out I had to pull the plug out (not only soft off) Hard off, then plug them both in and everything what it redtected very well. OK, I thought that my ATI card must be a bit on the older side and some problem there.

    I have upgraded to Windows 10 and all kinds of other problems began to arrive. So, I just put a HDMI monitor and another on DP. No problem since

    Now I have a new laptop Dell Latitude E7440. I made a Garland and in plugged into the laptop, wow. It worked. OK, used like that for several hours, were to return to something and the two white screens (black screen - no error message) return? huh?

    Yet once, started messing around with the monitors, ahh. Okay, hard power cycle. The arrow all back to normal.

    What is the problem with that? Its certainly not the GFX card or drivers, since a PC was the ATI drivers, and this new Dell drivers Intel of origin. SAME PROBLEM!

    I have read this guy bought 6 monitors and simply gave up and released.

    I want to buy another monitor, but I don't want these bloody issues? What can I do to fix this? I am a developer mobile and going to be pluggin in the office, click client, and then back to the office. I won't be bothering with these monitors. All the patches?

    There is not an update of the firmware 'at home '. You must send an Exchange monitor. Understand, the only way to get a monitor with firmware flashed A03 is via a used Exchange. Read this.

  • Dell U2414H and Display port to DVI cable

    Hello.

    Have a U2414H monitor I need to connect to a Dell T1700 purchased with a videocard of Nvidia K2000 added. I need to use the connector of the video card. 2 display ports will be for an another U2414H monitor and a HDMI TV for meetings. I have a Display port to DVI cable and I try to use it from the Dell U2414H monitor and am out of luck. I can't seen to find info if DP supports the U2414H monitors to DVI cables. Has anyone else got it to work? I tried the DVI port on the PC with HP monitors and they worked. Any ideas are greatly appreciated. Thanks in advance.

    Output DVI on VC > DP cable DVI > entry DP on monitor

    The U2414H has the following ports =.
    DP in
    CDM in
    DP on
    HDMI in
    HDMI in

    The K2000 has the following ports =.
    DVI - I DL
    DP
    DP

    A video card DVI port cannot convert to the DP/CDM monitor via a single cable. What you bought was designed at the downconvert a video card DP/CDM to a DVI monitor. You can buy a DVI to HDMI:
    Computer DVI K2000 graphics card on--> cable DVI to DVI--> converter --> HDMI to HDMI Cable--> monitor HDMI in

    -OR-

    K2000 DVI graphics card on--> of computer--> monitor HDMI DVI to HDMI Cable to

  • Mini Display Port has completely stopped working

    So I bought a Mini Display Port to HDMI adapter and it has worked perfectly well for more than a month. That's until 3 days ago. Out of nowhere I plugged my HDMI into the adapter and the power led of the monitor turned on and after a few seconds of reading, "No Signal". I have to hold the power cord in the more odd angles to get even for the screens of mirror, and even in this case, the screen is static at 80%. I looked online and tried every single tip or solution I've seen without success. All my HDMI cords are fully functional as I tried each one with my PS4 and works perfectly, so this isn't the issue. I've never had problems like this with any other Apple computer. Probably because no other computer using mini display ONLY ports. If anyone has had this problem and found a solution please let me know, if I can try to get this working. I have a MacBook Pro 15 in. mid-2012 with the processor i7 under OS X 10.8.5

    blmller2 wrote:

    I have to hold the power cord in the more odd angles to get even for the screens of mirror, and even in this case, the screen is static at 80%.

    This suggests a possible problem with the cord.  I would like to make an appointment with an Apple store genius bar and I tested the unit and the power cord.

    Ciao.

  • Aspire E15 E5 - 573 G-51U8 embedded display port

    Hi all

    I don't have a problem with this wonderful machine, but to ask a question:
    Because I've learned to use Adobe products, I can't find the color range of this unit quite satisfactory TN HD Panel, so I decided to upgrade to an IPS FHD.

    My question is: is Aspire E15 E5-573 G-51U8 uses 1 lane or 2-way eDP (embedded display port) to connect the motherboard with billboard? (bearing in mind that it is a connector 30 pins, right?)

    I need this information because it displays 1, lane supports up to 900 p (in my case it's a 768 p display), while track 2 is minimal for the 1080 p screen which I purchase plan (to THE Optronics B156HAN01.2 - specifications). Basically a display panel 1, lane can and will be when he joined with cable 2-way, but the display panel 2-way will not work if connected by cable 1, lane.

    Additional information:
    Model: E5 - 573 G-51U8
    S/N: NXMVMEX045 (10 characters)
    MFG DATE: 2015/06/25

    Thank you in advance!

    Hello

    Wow! Many research... but I found .

    If your laptop is equipped with this motherboard: Intel I5-5200 and nVidia GeForce 920M - 2 GB.

    I found many models with this one in HD and FHD.

    1. The cable of the eDP is the same for both models:

  • P2415Q - no display on DVI, HDMI. No menu. Worked perfectly for a month on the display port

    Line of reason: Dell P2415Q. After a month, works perfectly on the display port, no display on screen Display Port or HDMI, no response to the menu buttons, backlight and power ON but no picture on the screen.

    Description of the problem

    The monitor worked out of the box for a month using the mini display port display port cable supplied with the monitor, which was plugged into my XFX 7970 and 7950 graphics cards. It supports 4K at 60 Hz and has been exceptional for photos, videos and games. Wednesday, the monitor no longer works, no picture or menu is displayed on the monitor. I plugged my old monitor to help diagnose via DVI graphics card even. When I press the power button on the Dell P2415Q monitor, the power LED lights up and the computer detects the monitor (as shown in the menu of the windows screen resolution). He defines as a secondary display but the screen remains black, I see the light power and backlight is turned on. No power save mode popup doesn't appear on the monitor, when I press the buttons of the menu there is no response from the screen, it stays black. I repeated with an HDMI cable, the same problem occurs without intervention or image. I repeated and disabled crossfire (which allows graphics cards to run independently) and tried the second graphics card without response. I tried the HDMI cable I used on my old LG monitor, it works well. I tried to connect a laptop on HDMI to the monitor too, no response from the monitor. I've exhausted all the tests I can think, I guess I'll have to return to the screen for repair or replacement under warranty. A question to the community - and dell rep is there anything else I can try / to make this work? 

    Monitor / computer details

    Monitoring of service tag:
    Computer: Non-Dell, build self about 2 years ago. Ivy Bridge i5, motherboard Gigabyte Sniper, 16 GB RAM, XFX 7970 GPU and XFGX 7950 GPU crossfire, 256 GB SSD, Corsair AX 860W (860W on independent 12V rails) supply power. Windows 7, 64-bit. (D2342 LG secondary monitor).
    Operating system: Windows 7, 64 bit.
    Graphics card: XFX 7950 XFX in Crossfire and 7970 (tested separately, product monitor fault at a time).
    Video card driver: 14.12 AMD driver Catalyst (restored to the old driver, always due to lack of product monitor).
    Video card output ports: tested with miniDP and HDMI on both cards, with crossfire enabled and disabled. Monitor product always loopholes.
    Cable video card: miniDP to DP cable supplied with the monitor. HDMI, tested with spare monitor to confirm it works correctly.
    Monitor Menu button: Inadmissible, what power is enabled on the computer detects the Dell P2415Q monitor, the backlight lights up but no image appears on the screen. By pressing the menu buttons produces no result - menu does not appear on the screen. Power LED is lit.
    Monitor purchase: purchased from Overclockers.co.uk March 2015.

    * Turn off the monitor
    * Disconnect all cables from the screen, including the power cable
    * Press the power monitor in pendant button 15 seconds
    * Reconnect monitor cables, then repeat the test. If still no go, your only option is to get exchanged by buying warranty
    * But first serial number must be transferred on your behalf using this form

  • No message signal on an external TV via display port

    * Original title: Display port

    Hi, I bought this computer. Trodden to plug into my TV via the port display > HDMI but it says no signal.

    I tried

    -different cables

    -different slot

    -different Tv

    -duplicate or projector only option with the help of another monitor via VGA

    -changed screen resulation

    nothing works

    She just cannot recognize the TV via DP

    It's just driving me crazy.

    Ask yourself one can help

    Thank you

    Mac

    -

    ------------------
System Information
------------------
Time of this report: 4/12/2016, 13:44:47
       Machine name: HOME-PC
   Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.151019-1254)
           Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
       System Model: OptiPlex 980
               BIOS: Phoenix ROM BIOS PLUS Version 1.10 A05
          Processor: Intel(R) Core(TM) i7 CPU         870  @ 2.93GHz (8 CPUs), ~2.9GHz
             Memory: 8192MB RAM
Available OS Memory: 8118MB RAM
          Page File: 1365MB used, 14870MB available
        Windows Dir: C:\Windows
    DirectX Version: DirectX 11
DX Setup Parameters: Not found
   User DPI Setting: 144 DPI (150 percent)
 System DPI Setting: 96 DPI (100 percent)
    DWM DPI Scaling: Enabled
     DxDiag Version: 6.01.7601.17514 32bit Unicode

------------
DxDiag Notes
------------
      Display Tab 1: No problems found.
        Sound Tab 1: No problems found.
          Input Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D:    0/4 (retail)
DirectDraw:  0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay:  0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow:  0/6 (retail)

---------------
Display Devices
---------------
          Card name: ATI Radeon HD 3400 Series
       Manufacturer: Advanced Micro Devices, Inc.
          Chip type: ATI display adapter (0x95C5)
           DAC type: Internal DAC(400MHz)
         Device Key: Enum\PCI\VEN_1002&DEV_95C5&SUBSYS_03421028&REV_00
     Display Memory: 3059 MB
   Dedicated Memory: 248 MB
      Shared Memory: 2811 MB
       Current Mode: 1920 x 1080 (32 bit) (60Hz)
       Monitor Name: Generic PnP Monitor
      Monitor Model: LCD MONITOR
         Monitor Id: MTC03D7
        Native Mode: 1440 x 900(p) (59.887Hz)
        Output Type: HD15
        Driver Name: aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atiumdag,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver File Version: 8.17.0010.1129 (English)
     Driver Version: 8.970.100.1100
        DDI Version: 10.1
       Driver Model: WDDM 1.1
  Driver Attributes: Final Retail
   Driver Date/Size: 4/30/2013 14:19:54, 1094024 bytes
        WHQL Logo'd: Yes
    WHQL Date Stamp:
  Device Identifier: {D7B71EE2-D685-11CF-F177-4823BEC2C535}
          Vendor ID: 0x1002
          Device ID: 0x95C5
          SubSys ID: 0x03421028
        Revision ID: 0x0000
 Driver Strong Name: oem9.inf:ATI.Mfg.NTamd64.6.1:ati2mtag_RV610:8.970.100.1100:pci\ven_1002&dev_95c5
     Rank Of Driver: 00E62001
        Video Accel: ModeMPEG2_A ModeMPEG2_C
   Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                     {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                     {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                     {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                     {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                     {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                     {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                     {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                     {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                     {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
       D3D9 Overlay: Not Supported
            DXVA-HD: Not Supported
       DDraw Status: Enabled
         D3D Status: Enabled
         AGP Status: Enabled

-------------
Sound Devices
-------------
            Description: Speakers / Headphones (Realtek High Definition Audio)
 Default Sound Playback: Yes
 Default Voice Playback: Yes
            Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0269&SUBSYS_102802DA&REV_1001
        Manufacturer ID: 1
             Product ID: 100
                   Type: WDM
            Driver Name: RTKVHD64.sys
         Driver Version: 6.00.0001.7724 (English)
      Driver Attributes: Final Retail
            WHQL Logo'd: Yes
          Date and Size: 1/22/2016 23:11:38, 4769536 bytes
            Other Files:
        Driver Provider: Realtek Semiconductor Corp.
         HW Accel Level: Basic
              Cap Flags: 0xF1F
    Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
 Static/Strm HW 3D Bufs: 0, 0
              HW Memory: 0
       Voice Management: No
 EAX(tm) 2.0 Listen/Src: No, No
   I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No

---------------------
Sound Capture Devices
---------------------
-------------------
DirectInput Devices
-------------------
      Device Name: Mouse
         Attached: 1
    Controller ID: n/a
Vendor/Product ID: n/a
        FF Driver: n/a

      Device Name: Keyboard
         Attached: 1
    Controller ID: n/a
Vendor/Product ID: n/a
        FF Driver: n/a

      Device Name: 2.4G RX
         Attached: 1
    Controller ID: 0x0
Vendor/Product ID: 0x0E8F, 0x00A7
        FF Driver: n/a

      Device Name: 2.4G RX
         Attached: 1
    Controller ID: 0x0
Vendor/Product ID: 0x0E8F, 0x00A7
        FF Driver: n/a

      Device Name: 2.4G RX
         Attached: 1
    Controller ID: 0x0
Vendor/Product ID: 0x0E8F, 0x00A7
        FF Driver: n/a

Poll w/ Interrupt: No

-----------
USB Devices
-----------
+ USB Root Hub
| Vendor/Product ID: 0x8086, 0x3B3C
| Matching Device ID: usb\root_hub20
| Service: usbhub
|
+-+ Generic USB Hub
| | Vendor/Product ID: 0x8087, 0x0020
| | Location: Port_#0001.Hub_#0001
| | Matching Device ID: usb\class_09
| | Service: usbhub

----------------
Gameport Devices
----------------

------------
PS/2 Devices
------------
+ HID Keyboard Device
| Vendor/Product ID: 0x0E8F, 0x00A7
| Matching Device ID: hid_device_system_keyboard
| Service: kbdhid
|
+ HID Keyboard Device
| Vendor/Product ID: 0x0E8F, 0x00A7
| Matching Device ID: hid_device_system_keyboard
| Service: kbdhid
|
+ Terminal Server Keyboard Driver
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
|
+ HID-compliant mouse
| Vendor/Product ID: 0x0E8F, 0x00A7
| Matching Device ID: hid_device_system_mouse
| Service: mouhid
|
+ Terminal Server Mouse Driver
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD

------------------------
Disk & DVD/CD-ROM Drives
------------------------
      Drive: C:
 Free Space: 432.5 GB
Total Space: 476.6 GB
File System: NTFS
      Model: WDC WD5000AAKX-75U6A SCSI Disk Device

      Drive: D:
      Model: TSSTcorp DVD+-RW TS-H653G SCSI CdRom Device
     Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7601.17514 (English), , 0 bytes

--------------
System Devices
--------------
     Name: Intel(R) processor System Control and Status Registers - D157
Device ID: PCI\VEN_8086&DEV_D157&SUBSYS_00DA0028&REV_11\3&172E68DD&0&42
   Driver: n/a

     Name: Standard Dual Channel PCI IDE Controller
Device ID: PCI\VEN_8086&DEV_3B66&SUBSYS_02DA1028&REV_06\3&172E68DD&0&B2
   Driver: n/a

     Name: Intel(R) 5 Series/3400 Series SATA AHCI Controller
Device ID: PCI\VEN_8086&DEV_3B22&SUBSYS_02DA1028&REV_05\3&172E68DD&0&FA
   Driver: n/a

     Name: Intel(R) processor Semaphore and Scratchpad Registers - D156
Device ID: PCI\VEN_8086&DEV_D156&SUBSYS_00DA0028&REV_11\3&172E68DD&0&41
   Driver: n/a

     Name: Intel(R) Management Engine Interface
Device ID: PCI\VEN_8086&DEV_3B64&SUBSYS_02DA1028&REV_06\3&172E68DD&0&B0
   Driver: n/a

     Name: Intel(R) Q57 Express Chipset LPC Interface Controller - 3B0A
Device ID: PCI\VEN_8086&DEV_3B0A&SUBSYS_02DA1028&REV_05\3&172E68DD&0&F8
   Driver: n/a

     Name: Intel(R) processor System Management Registers - D155
Device ID: PCI\VEN_8086&DEV_D155&SUBSYS_00DA0028&REV_11\3&172E68DD&0&40
   Driver: n/a

     Name: High Definition Audio Controller
Device ID: PCI\VEN_8086&DEV_3B56&SUBSYS_02DA1028&REV_05\3&172E68DD&0&D8
   Driver: n/a

     Name: Intel(R) 82801 PCI Bridge - 244E
Device ID: PCI\VEN_8086&DEV_244E&SUBSYS_02DA1028&REV_A5\3&172E68DD&0&F0
   Driver: n/a

     Name: Intel(R) QuickPath Interconnect - D151
Device ID: PCI\VEN_8086&DEV_D151&SUBSYS_00DA0028&REV_11\3&172E68DD&0&81
   Driver: n/a

     Name: Intel(R) 5 Series/3400 Series Chipset Family PCI Express Root Port 5 - 3B4A
Device ID: PCI\VEN_8086&DEV_3B4A&SUBSYS_02DA1028&REV_05\3&172E68DD&0&E4
   Driver: n/a

     Name: Intel(R) 82578DM Gigabit Network Connection
Device ID: PCI\VEN_8086&DEV_10EF&SUBSYS_02DA1028&REV_05\3&172E68DD&0&C8
   Driver: n/a

     Name: Intel(R) QuickPath Interconnect - D150
Device ID: PCI\VEN_8086&DEV_D150&SUBSYS_00DA0028&REV_11\3&172E68DD&0&80
   Driver: n/a

     Name: Intel(R) 5 Series/3400 Series Chipset Family PCI Express Root Port 1 - 3B42
Device ID: PCI\VEN_8086&DEV_3B42&SUBSYS_02DA1028&REV_05\3&172E68DD&0&E0
   Driver: n/a

     Name: ATI Radeon HD 3400 Series
Device ID: PCI\VEN_1002&DEV_95C5&SUBSYS_03421028&REV_00\4&376AF7CF&0&0018
   Driver: n/a

     Name: Intel(R) processor PCI Express Root Port 1 - D138
Device ID: PCI\VEN_8086&DEV_D138&SUBSYS_02DA1028&REV_11\3&172E68DD&0&18
   Driver: n/a

     Name: Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C
Device ID: PCI\VEN_8086&DEV_3B3C&SUBSYS_02DA1028&REV_05\3&172E68DD&0&D0
   Driver: n/a

     Name: Intel(R) processor DMI - D131
Device ID: PCI\VEN_8086&DEV_D131&SUBSYS_02DA1028&REV_11\3&172E68DD&0&00

  Balanced Flags: 1424
    Enabled:
    Force throttling
    Allow batching
    Force half deinterlace
    Force scaling
    Decode Power Usage: 50
  PowerFlags: 1424
    Enabled:
    Force throttling
    Allow batching
    Force half deinterlace
    Force scaling
    Decode Power Usage: 0

    Hey there Mac5321,

    You can connect any monitor to this port? The port on the GPU works at all? Have you tried another port VGA, HDMI or other available to connect to any monitor at all? The computer worked before?

    I try to reset the BIOS to its default settings and retry the system if it will bring an image to any monitor. The fault may be in the GPU or motherboard not providing the connection appropriate for video output. Is the computer works properly, the fans spinning, initial POST beep, etc.?

    Captain_WD.

  • Display Port works out of box?

    Out of the box display port doesn't seem to work for the configuration of the bios. The VGA port works well, is this normal and if so how do you get the display port to work on the configuration of the bios?

    I got to work. The problem was 2 defective nine display adapter DVI cable port. Try so do not buy Chinese!

    Roger

  • U2412m continues to go to power saving on the Display Port!

    According to the title, the monitor works fine on DVI - D, however, when you use the Display Port, it will never get photo.

    I unplugged all the cables and only connected 1 monitor to my computer. When I plug the Display Port, the monitor recognizes the cable, and he goes to sleep. However, he never wakes up and there are always connected via the Port display power saving mode.

    I have connected my second monitor, and Windows by virtue of the resolution of the screen, I can see the two monitors that on DVI and the other on the display port., but the display port we'll never come back to life.

    My problem is similar to this: http://en.community.dell.com/support-forums/peripherals/f/3529/t/19534915.aspx

    And this: http://en.community.dell.com/support-forums/peripherals/f/3529/p/19444864/20290936.aspx

    People who could not find a solution to this. What is the problem with this monitor and display port?

    The screen does not appear even the POST screen or windows loading

    Hello.

    I bought another DP cable to replace the one I bought on ebay. Well, this one works very well, so it was the cable. Summer reading on the 20 pin and how that creates a problem.

  • Photoshop CS4 video card? -Need Display Port

    You people have been wonderful to help me with this project. For those who have not seen from my previous posts, I build a computer for a friend who uses Photoshop CS4 exclusively for photo 2D work. It's everything that he uses his computer, so no other questions.

    After a lot of research and help from you, I found the "perfect" video card The only problem is, it is not a display Port.

    PROBLEM: None of the NVidia cards "tested" on the list of Adobe CS4 you guys referred to have Ports to display!

    Now what? With the reputation of CS4 to be picky, we risk buying a card not on the list?

    The list was just updated in mid-January... and had not been a while. It may be a long time before it is updated again.

    As always, thanks in advance for any piece of advice or information you can offer me.

    Chuck

    The partnership only I read on concern that the high-end to price cards workstation Nvidia and Photoshop CS4. But this partnership goes only as far as seen problems such as the 195 series pilot and the bridge.

    As a system integrator, you know the drivers are a gamble at best. There are countless messages from Nvidia owners have to swap drivers to get CS4 work best with their system.

  • When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command

    When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command

    Yes it will be displayed.

  • Mini display port to VGA

    My vga adapter mini display port will work with port thunderbolt?

    In addition, what should I do if the projection does not have the projection screen? I'm doing a presentation with my MBA and I lost my VGA cable to test

  • X 1 carbon 20BS do not recognize the Mini Display Port

    Hello - I have recently acquired a Thinkpad X 1 carbon 20BS with a new installation of window 10. While I am able to connect to external monitors via HDMI, I was unable to do that via the Mini Display Port. Connection of a monitor to the Mini Display Port didn't do nothing - the monitor is not identified by Windows.

    So far, I have installed the drivers of:, but it did not help. Any help to find ways get the carbon X 1 to recognize the Mini Display Port will be really appreciated.

    Thank you in advance.

    Jake - Thanks a lot for the reply. Happy to report that I was able to get the mini DP to work and he recognizes the compatible monitors very well.

    I tried to find a solution to link the Thunderbolt display carbon, but unfortuantely it seems not to be a Thunderbolt controller that is compatible with the mini DP carbon.

  • X 1 carbon (A 20, 7) - what is the output of the mini display port?

    Hi all

    I have the 1 carbon - Type 20A 7 X

    I wanted to know what is the output of my mini display port

    What is 60 Hz? 30 Hz? ...?

    To connect a screen 4 K my machine, I need things

    1. that my graphics card will support a 4 K display

    2. I need the mini display will result in 60 Hz

    This is why I need this information

    I checked everything autour with Lenovo and all and can't find an answer

    I would appreciate your help

    Thank you

    20A 7 (and A 20, 8) - Type of Machine belongs X1C generation 2.
    There is no machine X1C Gen4, 'only' Gen3 (MT 20BS, 20BT)

    Specification of the platform is on the next page:
    http://PSREF.Lenovo.com/product/158?Mt=20A7

    The detailed specifications of your model appears a little later on the site above. Or download the file below and watch your model:
    http://www.Lenovo.com/PSREF/PDF/ThinkPad.PDF

    Information on factory installed on your laptop parts are here (computer type laptop s/n):
    http://support.Lenovo.com/us/en/ibasepartslookup

    Remove s/n of your post above for your privacy.

Maybe you are looking for

  • Where can I find the drivers for a sony viao vgn-s360?

    I tried to install windows 7 on it, it worked, but lost all the drivers, so I reinstalled xp because the drivers are not supported on 7. Now I need a lot of drivers so that it can connect to the internet, as well as the display area is not the width

  • Memory ate

    Hello! I have a problem with my Sansa Fuze 8 GB. A few weeks ago, I thought to change the music I had on my drive so I have plugged into the PC, deleted all files, chose new ones and I wanted to copy on the "rocket", but he showed me that I don't hav

  • Send back replacement pre? Help!

    Hey there Palm support community! Friday night, my pre acted a little funny. The screen was not light well push the power button or by sliding the keyboard. I removed the battery and started the phone up and it worked for a bit, but then began to sho

  • CUDA performance not there

    Hi allI had a computer aorus new laptop with a gtx 980M (8 GB ram) + i7 cpu + 16 GB of ram.I tried to test the performance of cuda with followed by a period in first pro. In the project settings no matter what I use the engine cpu or mercury, CUDA, I

  • Adobe Reader XI - change default printing preferences

    HelloWhen you print a document, the "Shrink oversized pages" option is selected by default.Is it still possible to 'Real size' instead of 'Shrink oversized pages?I searched a bit but I did not really find a solution.Anyone know if this is possible?Th