U2414H, HDMI

Similar Questions

• U2414H HDMI to HDMI connected to the laptop - cannot set high resolution

  I recently bought a U2414H monitor connected to my laptop via HDMI to HDMI.  I am running windows 7 and I am unable to set the resolution on the monitor.  It is currently set at 1366 x 768, the same as my laptop.  Any advice would be appreciated as it is my first external monitor, so I am new to the terminology. With our thanks

  I went to the Toshiba site and it says that the laptop of 2012 is abandoned. I doubt that its HDMI port is 1.4. But the U2414H HDMI is backward compatible with older versions.
  * Turn off the laptop and the U2414H
  * Unplug the computer U2414H
  * Turn on the laptop
  * Turn on the U2414H
  * Connect the HDMI cable to both
  * Right click on the windows desktop
  * Click on screen resolution
  * See you an image with two monitors? One being the U2414H? If Yes, right click on it and choose extend to the U2414H

• U2414H to connect to the PC via HDMI and chaining

  Hi all.  I have two US2414H I am trying to connect to my Dell XPS of 5 years.  The NVIDIA Geoforce GT 740 LP graphics card has only one of each DVI, HDMI and VGA ports.  No DP to all ports.  I managed to connect a monitor with a HDMI to HDMI connection.  The manual says to use cable of DP/miniDP to chain the two monitors together, but I can't get this to work.  I tried switching ends, I plug into which monitor.

  What happens if I got a DP/DP cable or cable miniDP/miniDP, rather than using the DP/miniDP cable supplied with the monitor?

  I begin to fear that, without connecting the monitor 1 via connection DP, I won't be able to Garland.  I'm wrong, or is there a solution?  I'll be forced to install a new graphics card with port of DP?  $$$$$

  I really didn't know that I should be an expert comes to install a COMPUTER monitor.  JSYK, I'm far from being a COMPUTER expert.  Laughing out loud!

  FYI, I was on the phone last night, with Dell technical support, and the representative told me that, without port DP on my PC, I need a HDMI to DVI cable adapter.  I bought one, and it still doesn't work.  Not amused.

  The U2414H has two HDMI ports. Thus, when you open the OSD (On Screen Display) - input Source, you should test both the HDMI listed.

  

  Daisy chain of the U2414H, you need to get a video card with DP or CDM outside.

  In theory, it should work =
  GeForce GT 740 out HDMI--> HDMI to HDMI Cable--> #1 U2414H HDMI in
  GeForce GT 740 out DVI--> DVI to HDMI Cable --> HDMI U2414H #2 in

• U2414H cannot connect to Sony Vaio

  I can't connect my U2414H to my Vaio laptop. I couldn't use the DP cable supplied by Dell, because my Vaio has no compatible port. I bought a HDMI cable that fits into the laptop and the entrance is connected to the mini DP port of the monitor but does not connect monitor. The input of the monitor is set mini DP.

  I tried all the options display on the Vaio - extend, duplicate, second screen only, but nothing works.

  Help, please. Support Dell has not been of any use.

  BTW, what is the USB cable provided by Dell for? I plugged it into the computer laptop and monitor. Is it still necessary?

  A computer HDMI output port cannot convert to a DP/CDM Monitor in port via a straight through cable. What you have purchased is designed to do the opposite.
  Computer DP/CDM HDMI output in the port to listen to port

  You need to buy an HDMI cable to HDMI =
  computer HDMI port--> HDMI to HDMI Cable--> U2414H HDMI output port

  To access downstream low U2414H USB ports, USB upstream cable must be connected from the U2414H to a USB port on the computer.

• U2414H, DP cannot see Bios screen

  I read a lot of posts on the U2414H and the problems with DP. I have a unique question to add. I have two monitors U2414H, NOT chained. The two are connected with full DP DP full of my quadro FX1800 to the monitors themselves. When I turn on my PC, monitors remain in power saving mode until appears the windows login screen. After this point, they work no problem whatsoever. Could be worse, but I can't access the bios at all with these monitors. If I hit the key to the bios, the PC will get into the bios, but my screen is simply stay in energy saving, so I'm stuck until I reboot manually. Has anyone else had this issue or know how to fix? CHANGE > Yes, I did the factory reset in the settings of the monitor. I also tried the solution proposed for monitors of the Garland with registry changes, even if my monitors are not chained. No effect.

  To display the bios, you will need to connect to the FX1800 via its DVI port.

  Computer video card DVI out-->--> U2414H HDMI DVI to HDMI Cable to

• U2414H - Audio from HDMI source output?

  Hello

  Looking for someone with a Dell U2414H and perhaps even a PS4 (or any HDMI device) to confirm something for me. I find in myself a get for use with a PS4 but have heard conflicting reports on the audio output on the U2414H port. I wanted to plug PS4 via HDMI to the U2414H and then plug a pair of speakers to the audio output. However, I said the only outputs audio output audio port provided to the monitor via the USB, sounds strange to me, but I wasn't able to find anywhere to confirm that it generates the audio from the HDMI ports too. Many thanks for any help. I hope that I have just to be misinformed as would like to order a.

  Sorry, I meant to come back here and update this. I had someone else confirms to me away so went ahead and bought one. I can certainly confirm that some audio goes in making hdmi port goes out the audio 3.5 mm on the monitor port. PS3 well at least that's all, I used with it.

• Dell U2414h menu gone? Keys no longer work?

  My Dell U2414h monitor is connected to the end 2012(El Capitan) Apple Mac Mini HDMI. After 1:30, I can't go back in the Menu of the Dell printer. It seems as if the touch buttons no longer work. It seems that if the menu is somehow locked.

  The only thing dat will work is cut off from the power supply. After that work very good tactile buttons, but after a while or when I closed the Mac Mini, I can't go back in the menu. The Dell monitor is now also waiting because I cannot 'touch' the power button.

  Someone know what I did wrong or is something wrong with the Dell U2414h or is it something in the Apple Mac Mini?

  I asked the same question in the Forum and they said that it might have something to do with my Apple Mac Mini.

  During the Forum, they gave me a solution that does not work for me:

  Reset the U2414H and re - test
  * Turn on the computer and monitor off
  * Disconnect all cables from the screen, including the power cable
  * Press the power monitor in 30 seconds button
  * Plug the monitor cables for the monitor and the video card of the computer. There should be only one cable video connection from the monitor to the video card
  * Turn on the monitor, then the computer

  Note, as this model was not tested/validated on the proprietary Apple hardware, ports, and the software, you must also post on the Apple Forum of Discussions and see if they can offer an overview or troubleshooting steps.

  
  

  Also does not work the solution in the manual to touch the power button for 10 seconds.

  
  

  Someone knows what's the problem?

  I think it is likely yo have a problem with the monitor. The video and does not interact with the onscreen menu/controls.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  Subject of memory NVRAM and PRAM

• U2414H, laptop, Windows 10, impossible to install the drivers?

  ConnectionL HDMI and make sure that the HDMI cable has worked well

  Have you tried both of the two HDMI ports, but some drivers may be installed. The U2414H went to all time energy saving mode.

  And here are the messages in double clicked on the setup of the Dell Monitor driver:

  The following connected monitors have been detected:
  Plug and Play Monitor - AUO AUO303C

  Drivers for the following forms have been found:
  Plug and Play Monitor - Dell DELA0A4
  Plug and Play Monitor - Dell DELA0B2
  Plug and Play Monitor - Dell DELA0A2
  Plug and Play Monitor - Dell DELA0A3

  Drivers for the following connected monitor can be installed:
  None

  Please connect your monitor before running this program.

  Problem has been resolved. Thank you. The reason is that the 10 Windows updated the graphics driver automatically with an incorrect version.

• connect AC511 SoundBar hollow hub USB of Dell U2414H Monitor

  Hello

  I m ussing U2414H monitor (over HDMI) and currently got the SoundBuffer for she.
  I understend that connectign the Soundbar in the monitor does no point but it is possible to
  link to the monitor to the PC USB hub and then connect media devisess (bar sound, usb, headphone, usb, mouse etc.) directly on the screen?

  And in case where possible which cable / slot I use to bridge the gap.

  Thank you

  Yes possible to connect the hub on the screen but you then attach a standard USB cable to the Hub on the monitor at the back of the PC.  Its the same B cable that is used for printer A/USB cable etc.  You must make sure that windows is set to sound on USB Audio not the analog channel output.

  Learn how to configure and connect your monitors, set the parameters of resolution, find drivers and updates and other useful resources.

  To learn more

  http://FTP.Dell.com/manuals/all-products/esuprt_electronics/esuprt_Display/

  

  

  

• U2414H used with the Inspiron 13 7374

  Hello

  I have an Inspiron 13 7374 and a U2414H monitor. I thought it would be a simple connection system, but it does not include a HDMI cable. I'm not sure what the SS cable and do not have a DP/miniDP port on my laptop.

  I also do not have a hard drive on my Inspiron so impossible to install the drivers and documentation. Is there a file I can download it via dell.com that will have the same data?

  Really appreciate any assistance.

  You don't need the CD. Hereare all the manuals and drivers for the monitor.

• U2414H, Dual, laptop, Windows 10, Nvidia GTX 960 M, no STDS to the second monitor?

  Hi all

  I hope that I have included all relevant information in the present, but ask if I missed something. I bought two of the screens U2414H and a Windows 10 laptop computer powered by GTX 960 M with HDMI and Mini DP ports. My goal was to be able to the Garland of the whole U2414H screens so I could use my laptop out and about, and when connection back to the monitors of would have to plug in a cable and get two screens. In theory, but...

  I followed the instructions and using two Mini-DP to DP cables, connected the mini laptop RFP RFP on the first screen. DP on this same screen highlights Mini DP on the second monitor. I activated the DisplayPort 1.2 on both of these screens. I can't get any signal on the second monitor, it boils down to the power saving mode.

  Otherwise, I decided I would try using two cables and ditch the idea of DP STD I can at least use the two screens. So I have laptop HDMI to a screen and the MiniDP to another, and therefore, that alone will never work at a time. Individually, they work very well, both with HDMI or DP. But the two connection fails every time. When I tried to connect a display of alternative supporting HDMI as the second, which works very well.

  So I had an autour reading and it seems that it is common to have problems of connectivity to these screens. This brings me well on my two questions:

  (1) is there something that would work?

  (2) assuming that there is nothing that works, Dell can swap these screens for two that will achieve what I need?

  Thank you

  Dave

  In MST, DP 1.2 should be turned off (disabled) on the second monitor.

  Laptop AMD on--> U2414H CDM to cable DP--> DP U2414H #1 in (DP 1.2 enabled) (Port #3 in the image)

  
  #1 U2414H (Port #5 in photo) DP--> DP U2414H CDM cable--> 2 # U2414H CDM in (DP 1.2 disabled) (Port #4 in photo)

  When you use only no STDS, is the lid of the laptop open all trying to run two monitors of U2414H? This laptop can even run three screens, laptop LCD + 1 # U2414H + 2 # U2414H?

• U2414H, display port problem

  Hi guys, so I just bought U2414H for my rig to play with graphics card AMD Radeon MSI R9 390 8 GB memory GDDR5 512 bits with 1 DisplayPort, 1 x HDMI, 2 DVI - I. My problem is, when I connect miniDP to the monitor (which is only a miniDP) to (DisplayPort) my graphics card, AMD Radeon MSI R9 390, but it only goes to the power save mode. I can't access same monitor configuration. I already change the input source to the port of mini-affichage on the screen. but it still saying no mini display port.

  So, help me please.

  Hi Chris thanks for the reply, apparently my problem is solved, the main problem is that I plug the 2 x 6-pin power for graphics card, haha. Only, I have attached the graphics card to the motherboard.

  : D

• U2414H DVI and VGA

  Hello

  My graphics card has only Hdmi, DVI and VGA ports, and I just bought 2 U2414H.

  As I knew that they have no VGA and DVI ports, I also bought adapters.

  Anyway, I can't get it to work. The graphics card does not recognize via VGA or DVI monitors. He does it with the Hdmi interface.

  Is there something that I'm not taking into account, or set up correctly?

  Any help would be appreciated. Thank you.

  DVI cannot convert to monitor the RFP, so no, it won't work.

• How to string U2414H two screens without connector DIsplay Port

  I have a U244H screen and want to buy another to increase my overall display area.

  Currently, I connect to the U2414H using the HDMI output on my laptop. My laptop has 1 x HDMI and 1 x VGA outputs. Is it possible to set up daisy chaining with this configuration?

  I used the following Setup successfully. U2414H connected to HDMI and VGA monitor connected to the VGA output of my laptop and working well. However, I prefer two monitors of U2414H due to the smaller borders.

  The P2414H the same resolution (1920 x 1080) and the VGA port.

  The S2415H NOTE from the ADMIN: broken link has been removed from this post by Dell > the same resolution (1920 x 1080) and the VGA port.

• U2414H, Mac Book Pro, DisplayPort 1.2 empty, solved

  I'm posting here in the hope that it gets indexed by search engines and other people can find the answer that I spent a few hours searching without luck.  At first, I must say that I am generally very pleased with this monitor - like bezel-thin, very good quality picture, easy to set up and a great price. However, most of this post is going to be a complaint and attention to others. told me, incorrectly, that my early 2011 Mac Book Pro 15 "mini-DisplayPort taken in charge the DisplayPort 1.2 Protocol. It turns out only. Then when I activated the DisplayPort 1.2 screen turned white, as the instructions said he could. No biggie, you would think - just get on-screen display (OSD) to the top again and disable DisplayPort 1.2 or do a factory reset. Here, you can't get the OSD until a source is connected correctly to the screen. Which means that you can not disable DisplayPort 1.2 or do a factory reset, you want to do because you cannot successfully connect to the screen, until properly connect a device to the screen. And so on and so forth.

  There is no other way to do a factory reset, so the only way for me to reset the monitor that is to go buy a mini-DisplayPort-HDMI cable in order to connect to the monitor in this way and do a factory reset. I confirmed this with a call to Dell technical support, too. I don't quite see how thought happened during the design of the firmware. How do you design a monitor where the only way to do a factory reset is when a device is connected correctly? A major flaw, but it will apply only if you don't know this in advance, where this post.

  It also would have been clearer if the warning had said "this can make your blank screen which, until you have another cable to connect via HDMI, means that you have essentially an expensive piece of plastic."

  Follow these steps to disable the DP1.2 on the U2414H WITHOUT signal input

  Buttons =.
  Preset, brightness, Menu, power supply, output

  When you press the Menu button, the buttons are then =
  Up arrow key or down arrow control OK, return, power

  * Turn off the monitor
  Unplug all the video inputs of the U2414H wiring
  * Turn on the monitor
  * Press the Menu key
  * Press the button OK check (3rd left) and hold FOR 15 seconds
  * Disable DP 1.2