U2414H, DP cannot see Bios screen

Similar Questions

• Laptop computer connection directly to a projector and cannot see the screen of my laptop

  I'm trying to figure out how to display the screen of my laptop via a projector and also be able to see the screen of my laptop.  When I hit the function key for display on the big screen, my laptop darkens.  I found a post on this forum on the connection of additional views or projector (Set Up Multiple displays). When I go to Mobile PC and display to choose settings listed in the answer (mirrored, extended, etc.) aren't there.  My laptop is running Vista Business Service Pack 2 and two weeks.  Thanks for any help you can provide.

  Hello Shawn,

  Thanks for posting on the Community Forums of Microsoft Vista.

  It should probably be shortened on your laptop keyboard to turn on the visible screen (for example Fn + F5). Try these until you can see the image on the laptop monitor.

  Also, follow the steps and try to set the screen parameter as follows:

  (1) right click on the desktop, click Properties, and on the display settings, choose monitor as your main graphics card 1.

  (2) setup that monitor the as a 2nd external display (projector).

  (3) click on apply and Ok.

  Restart the computer to see if you are able to see the screen on laptop and projector.

  You can also check with the computer manufacturer to check if they have additional parameters to be changed.

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot access BIOS screens

  [Pavilion Dv6915nr, Vista 32] I can't no longer to the BIOS during the startup screens. It asks for a password, that he never had a. At one point, he shows a screen in French. I tried a BIOS update, but he refused to run.  Virus?

  Turns out it was just a BIOS battery dying.  Replaced and accessing BIOS very well.  No motherboard problem.

• When I install the new version of firefox browser dose being not fit on my screen. I cannot see the tabs or the ul bar and not even leave the firefox avecjoint

  When I install the new version of firefox browser dose being not fit on my screen. I cannot see the tabs or the bar ul and can leave not even firefox without using ctrl-alt-del and opening a master and have it at the end of program. Help, please.

  You may have a corrupted file xulstore.json .
  https://support.Mozilla.org/en-us/KB/changes-toolbars-and-window-sizes-are-not-saved

• My PhotoshopCC workspace is suddenly 'long' for my MAC screen.  I cannot see the bottom of the workspace and therefore cannot see the bottom of the vertical pictures.  How can I get this problem to what it has always been - set of the workspace editing on

  My PhotoshopCC workspace is suddenly 'long' for my MAC screen.  I cannot see the bottom of the workspace and therefore may not work on the bottom of the vertical photos.  How can I get that back to mount on display?

  Hi wassily.

  suggest you go menu window > workspace > reset Essentials

  and who needs to reset your workspace to the default.

  Kind regards

  Claes

• No satellite P300-17R no boot after BIOS screen

  Hi I have a major problem:

  When starting the laptop, I have the chance to see the bios screen after that normally you should see that win 7 starts up. I get a blank, backlight screen works but no cursor blinking or what so ever.

  Ive tried the following things:

  1. try all a/c topics like removing batteries etc related.
  -> nothing going on (white screen)

  2. ive tried inorder of key combinations possible to reach safe mode option:
  -> nothing going on (white screen)

  3. I remove the HARD drive and tried to boot from dvd - rom windows 7:
  -> works fine

  4. replace the HARD drive and set the bios to boot from dvd - rom only:
  -> nothing going on (white screen)

  5 ive got another laptop so I put the toshiba HARD drive and tried to see if it works:
  -> Win 7 works fine and I can get access to my HARD drive works fine and Win 7 also works very well

  6 ive the other the other laptop in the Toshiba laptop HARD drive then put it:
  -> ive got a work screen where windows vista asks to restore from a certain point (maybe cause of the difference in hardware between 2 laptops?)

  What's wrong???

  Please help me...

  Can we continue discussion under http://forums.computers.toshiba-europe.com/forums//message.jspa?messageID=226565?

  I mean, why start the second thread with the same problem.

• Re: Satellite Pro A200 - black screen after the BIOS screen

  Hello
  I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

  If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

  Check this box!

• Re: Satellite L635 (PSK04E) starts, but there is no BIOS screen

  Hello

  I have some problems with book L635, it starts without the BIOS screen. I checked the memory, cpu-OK-Ok.
  There a reaction on the service Fan Fun + B + F key.

  BIG THX IF I GET THE ANSWER.

  > it starts without the BIOS screen
  How to understand this?
  See Toshiba welcome screen on startup?
  Have you tried to use F2 to enter the BIOS settings?
  Windows starts correctly?

• Cannot adjust the screen resolution

  I tried to reset the setting on my resolution for my windows monitor XP WITH SP1, boots upwards in mode 4 by default bits. I'm under System 32 and before I tried to download updates for SP2, WAS in MEASURE of HAVING 16 BIT COLOR, cannot adjust the screen resolution, it is locked on 640 x 820. How can I fix it?

  Hello

  What Dell? Dimension? OptiPlex? Inspiron? Others? In the meantime, I'm looking to see if there is only a single 2300.

  I repeat...

  You just do a new installation of a Windows CD?

  If you have, you will need to install all the drivers concerned material, including graphics drivers.

  Click on start, run, then type devmgmt.msc and press ENTER. In Device Manager there devices not identified or marked as having a problem (marked with!)?

  Tricky

• Cannot run the screen saver because it requires a newer video card or one that is compataible with Direct3D.

  Hello

  I recently rebooted my computer; (Packard Bell) and now cannot run games or screen savers because it does not start. I think my problem has something to do with a Direct3D card? When I run screensavers, I get this message:

  Cannot run the screen saver because it requires a newer video card or one that is compataible with Direct3D.

  I have the impression that sound when I run the 3D games, such as minecraft or GMOD.

  I run on Windows Vista Edition Home Premium and does not do anything but re - install my computer because it wouldn't start.

  It is not as if the graphics card is not there, so I'm really confused!

  Please help me, like playing games is my favorite thing. ;)

  Charlie

  I also ran minecraft to double check and I got this error code:

  Bad video card drivers!

  -----------------------

  Minecraft could not start because it did not find an accelerated OpenGL mode.

  Generally, this can be corrected by updating the video card drivers.

  -BEGIN 7fe0271 error REPORT-

  Generated 10/10/12 21:04

  -Minecraft Version: 1.3.2

  -Operating system: Windows Vista (x 86) version 6.0

  -Java Version: 1.7.0_07, Oracle Corporation

  -Version Java VM: Java hotspot Client VM (mixed mode), Oracle Corporation

  -Memory: 422585352 bytes (403 MB) / 518979584 bytes (494 MB) up to 1037959168 bytes (989 MB)

  -JVM Flags: 2 total; Xms512m-Xmx1024m

  -LWJGL: 2.4.2

  -OpenGL: ~ ERROR ~ NullPointerException: null

  -Is Modded: Probably not

  -Type: customer

  -Texture Pack: ~ ERROR ~ NullPointerException: null

  -Position profile: N/A (disabled) [can't get system (java.lang.NullPointerException) properties]

  org.lwjgl.LWJGLException: Pixel format not accelerated

  at org.lwjgl.opengl.WindowsPeerInfo.nChoosePixelFormat (Native Method)

  at org.lwjgl.opengl.WindowsPeerInfo.choosePixelFormat(WindowsPeerInfo.java:52)

  at org.lwjgl.opengl.WindowsDisplay.createWindow(WindowsDisplay.java:185)

  at org.lwjgl.opengl.Display.createWindow(Display.java:311)

  at org.lwjgl.opengl.Display.create(Display.java:856)

  at org.lwjgl.opengl.Display.create(Display.java:784)

  at org.lwjgl.opengl.Display.create(Display.java:765)

  at net.minecraft.client.Minecraft.a(SourceFile:233)

  at net.minecraft.client.Minecraft.run(SourceFile:516)

  at java.lang.Thread.run (unknown Source)

  -REPORT of ERROR END bb61788b-

  Hello

  After you reinstall the operating system, you should also go to the website of your computer manufacturer > drivers download section > put your computer model number > search for your operating system and drivers (graphics, audio, etc.) > download and install.

  See you soon.

• Computer Vista gets to the BIOS screen, then restarts continually.

  It's on a Dell Inspiron desktop PC. I was browsing youtube, when I noticed when I clicked on something, he did not. Although the outlines of the buttons flashed as soon as I waved above them. If I clicked on a bookmark, it says that my internet connection is bad. But I was watching youtube, 3 minutes earlier.
  I close firefox, then go to the office. I CAN'T RIGHT CLICK! OR LEFT CLICK. On some points, I can click.  And some I can't. I unplug the computer from the wall. Rinse power. Wait 5 minutes. Restarts. Computer gets to the Dell BIOS screen. Will beep once, makes a sound of flickering, light flashes orange and repeats the process forever. I press F12 for the boot menu. Press enter on the SATA hard drive. And it starts fine. But I want to solve this problem, help!

  Hello

  You do not have the cold hard first permanently in the boot order?

  If you do, try the following steps to find your problem:

  "The computer does not start in Microsoft Windows Vista"

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_343119&isLegacy=true

  Using Dell Diagnostics:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=52057

  See you soon.

• Whenever my computer is pluged I can hardly see the screen

  the backlight is off tell me why it hapend

  vearsion: vista

  material of: toshiba

  AC adapter: Tommy pa371e-1ac3

  Read through possible solutions (3 pages) on this thread of users of Toshiba:

  VERY dark laptop screen - cannot see
  http://www.softwaretipsandtricks.com/Forum/hardware-problems/2158-laptop-screen-very-dark-cant-see.html

• When I restart Windows 7 home premium, the computer hangs on the bios screen.

  I don't know what exactly when this problem started, but I can stop the machine and it will start normally.  If upodates are installed and the machine restart it hangs at the bios screen all the time.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Magnifier works correctly, except that the window is opaque - cannot see through it.

  When I start the Magnifier it works well except that the window is opaque - cannot see through it.

  Hello Allen,.

  Something for to try you. Its called remove a wrong color profile. Go to control panel, then select color management. When this window opens be sure that the display on the main screen is your screen (monitor), then below make sure that the check box use my settings for this device is checked. Then scroll to the bottom of the page, click the color profile, and click on delete. Make your selection and click close to return back.

  How the Magnifier works now? Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Windows 7 cannot see is not my SCSI disks when I try to install. As the IDE drive is showen but is not usable.

  Windows 7 cannot see is not my SCSI disks when I try to install. As the IDE drive is showen but is not usable. Is there a FDISK program that can be run to solve this problem from a command promt?

  Hello

  You try to access BIOS and change the SCSI to IDE in the BIOS or Raid in IDE and try to install Windows 7.

  If it fails, contact your SCSI manufacturer for the latest drivers for your SCSI and install it by clicking on load drivers and try to install Windows 7.

  Hope this helps and works.

  Chris