U2515H, intermittent capacitive buttons?

Similar Questions

• HP Envy 700-214: Message "locking of the power button.

  I am getting an intermittent box appears which says "Power Button lockout".

  Tour: HP Envy 700-214 with two display monitors

  Monitor 1: HP 2010 (DVI)

  Monitor 2: HP L1950g (VGA)

  Windows 8.1

  Periodically this box appears on the monitor 1.  Sometimes the monitor turns off.  When I turn it back on, I'll get a surveillance area of the State, which opens by saying:

  DVI: assets

  VGA: No Signal

  1600 x 900 60 hz

  Which is curious since the monitor that is upward is the DVI monitor.  However, this box disappears after a few seconds.

  Is the problem with my video card in the computer, or is it with the monitor?

  [ETA]  I stopped and restarted the computer and the monitor and held the key monitor more than 10 seconds, as suggested in other posts found here on this site. [/ETA]

  Thank you very much.  Please let me know if you need more information.

  Hello @GaryLynnMass,

  I understand that your computer displays an intermittent "power button locked" message is displayed on your monitor, and I'd be happy to help you in this case!

  To avoid this message in the future, I recommend to take a look at the position of Big_Dave How can I turn off the lock on my HPw1858 monitor switch?

  If the problem persists, I recommend following the steps below:

  I provided you with a few steps, you can try below:
  
  Step 1. Unplug the power cord at the back of the screen and the wall
  Step 2. Press and hold the power button for at least a minute
  Step 3. Plug the power cable in the monitor, and then to the wall outlet
  Step 4. Press the Menu button on the monitor
  Step 5. Navigate to the factory reset option and select
  Step 6. Try a different cable to connect your monitor to your computer
  
  If the steps above did not resolve your issue, you can try the monitor on a computer or other device to see if the problem persists. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html
  
  Thanks for posting on the HP Forums. Have a great day!

• Compaq Presario CQ45 - 145TX

  Hello

  I need help. I just bought a laptop OS FreeDos (Compaq Presario CQ45 - 145TX). I try to install an operating system XP in there, but it is much too difficult. I'm on the eve to place... not to mention I need XP support drivers for all devices! In any case there is someone who can help me with this issue please?

  Specifications of the laptop is as below:

  REF.: FW564PA

  Model: Presario CQ45-145TX

  Processor: Intel® Core™ 2 Duo Processor P8600 (2.4 GHz, 1066 MHz FSB, 3 MB L2 Cache)

  Memory: 1 024 MB 800 MHz / 4 GB max * (1024 x 1 pcs) DDR2 memory

  HARD DRIVE: 320 GB

  Display/resolution: 14.1 "TFT WXGA high definition widescreen LCD panel with brightview technology

  Optical drive: drive DVD +/-RW Double layer with LightScribe

  Wireless: 802.11a/g/n

  OS: FreeDos

  Machine Chipset: Intel Mobile GM45 Express chipset

  Graphic chipset: Nvidia GEForce 9200 M GS with 256 MB of video memory dedicated

  External expansion card: Slot ExpressCard/54

  Ports:

  3 USB 2.0, HDMI, eSATA Combo, VGA, RJ-11, RJ-45, 1 headphone, 1 Microphone, Consumer IR, expansion Port 3, integrated fingerprint reader, Compaq Webcam with digital Microhphones integrated (VGA low-light)

  Integrated features:

  5-in-1 built-in Media Player slot digital / integrated 10/100/1000 Gigabit Ethernet / Modem high speed 56 K Fax / 101-key compatible keyboard, 1 quick launch - capacitive button, touchpad with button On / Off and dedicated vertical and horizontal scroll up/down / Bluetooth

• U2414H, Macbook Air, waking up to the power saving mode

  When my MacBook is sent to sleep or I shut down the computer, the monitor will sometimes get stuck in a loop where he wakes up "Power Saving mode" then displays "Enter Power Saving Mode" then shut off again and repeat in less than a second. Also while I was trying to open the OSD menu to check if the resolution is set correctly (as described in validation) capacitive buttons are just hard does not work. Hope you can help.

  Serial No.: CN-0H8H7G-74261-46 b-36GL
  Revision A01
  Included computer: MacBook Air mid-2014 connected via mini-DP to DP cable
  Intel graphics card internal HD5000
  Run monitor to 1080 p 60 Hz

  The air doesn't have a DP (DisplayPort). It uses Thunderbolt. So, how you connect to our RFP U2414H?

  Unfortunately, Dell does not validate the test / this model of monitor on Apple, ports and software hardware. For this reason, Dell has no troubleshooting steps a lot to offer. You can post on the Forum of Discussions Apple and see what they say. Some apple users have mentioned using a bolt of lightning to HDMI adapter or love at first sight for adapter DP has had some success.

  Apple computer thunderbolt port--> crush on HDMI adapter--> Dell HDMI to HDMI Cable TYH2W, W69C3--> Dell monitor HDMI port

  Apple computer thunderbolt port--> crush on CDM--> Dell DP DP adapter cable--> Dell monitor port CDM

  Apple computer thunderbolt port--> maid in CDM adapter--> Dell mDP to DP cable--> monitor Dell DP in the port

  You have the latest version (11 June 2014, A01). Users of Windows 8/8/1 under their power management windows computer balanced high performance which fixed some issues wake-up call. Windows 8/8.1 on balanced allowed the DP computer to go to sleep. He confused the handshake of DP at the end of the screen. Have you tried to test with DP1.2 disabled in the OSD menu?

• Since updating my iPad iOS 10, using the button home to close or open applications re works intermittently

  Since updating my i Pad for ios 10, the ability to close or restore applications open with a double-tap the home button, now does only intermittently.  Yesterday, it was not working.  Today, it was and I was able to close open approximately 20 applications. Now, it does not, once again.  I've seen some comments somewhere relative to other people with similar problems.

  Hello

  Go to settings-general - accessibility to the 'home' enable finger rest for Open button.

  Who can help.

  See you soon

  Brian

• intermittent square borders on buttons send form

  I have buttons for submitting forms with edges rounded with css "border-radius". I get intermittent square corners on the Send button. different corners every time. any ideas? the issue started firefox 23 and more.

  I should mention that on the system I tested, graphic hardware acceleration is turned off in the Options (advanced options = > general = > 'Use hardware acceleration when available') for other reasons. This might or might not be relevant.

• Why do Start button flash intermittently on windows vista

  The Start button in the taskbar flashes intermittently while any program is running. The tsk bar is set to auto-hide. I saw many people with the same issue. Yet, it has no solve the problem.

  Hi Bruce,.

  1. did you of recent changes on the system?

  Method 1:

  Step 1:

  Check if the problem persists in safe mode.

  Start your computer in safe mode .

  Step 2:

  If you are not faced with the question in safe mode, then you can try to perform a clean boot and see if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Method 2:

  If you are always faced with the question, then you can check if the problem occurs in the new user account.

  Create a user account

  If the problem does not occur then check out the following link to repair the corrupted user profile:

  Difficulty of a corrupted user profile

  Hope this information is useful.

• iPhone screen & Home button respond intermittently

  Hi all

  my phone has developed a fault in the last days where he sometimes don't harvest of keys on the screen or relies on the button home for 10 to 20 seconds but then 10 presses you try to do it all together after the deadline. It's an iPhone 6s more running 9.3.5 and have not changed anything recently.

  Oust just wondering if anyone has experienced this / knows how to fix this problem before I return it to the store for repair.

  Thank you

  Below are the basic troubleshooting steps. try and test of the top to the bottom:

  Reboot / Force Restart

  http://support.Apple.com/en-us/HT201559

  Restore backup

  Restore like new

  http://support.Apple.com/en-us/HT201252

• Why my tabs intermittently change to be next to the button below orange? I want to stay next to the orange button, to save a row of room on the screen.

  Firefox 4.0 - tabs are below the orange button, I want to stay next to him to save a line of space.

  You get the tabs on the title bar if you maximize the window of Firefox.

  You can also watch the pref browser.tabs.drawInTitlebar the topic: config page.

• Problem intermittent boot Tecra S2 after pressing the power button

  Hi all
  I have a Tecra S2 with the 6600go GFX card.
  The machine is large but presents the following problem.

  After that the machine was interrupted for a while it will start not reliable.
  You press the power button. Either as soon as you release the power button or a second later (changes every time) the green power light comes on. The fan spins at high speed then slows down to a crawl a few seconds later (as usual) but LCD does not illuminate.
  Also when it does not start USB devices are not initialized (I have a product key dongle which will flash if it is not initialized - when you start the laptop properly this dongle on continuous - a normal start, it is initialized before the ramtest BIOS)

  I've updated the bios a couple of times - it is now 2.4 (I noticed the power button timings were changed in the V1.9) but this has not solved the problem.

  I tried to start on the current with battery removed, ca battery & battery only - the result is the same.

  I can start later button power until the laptop off, wait a few seconds and then try to get back to work.
  After several of these cycles, it will begin eventually to the top. Recently, it seems that it took several attempts before start-up.

  If I have used the laptop for an hour or two and then turn it off it will start almost always a first time.

  If I put the laptop to sleep (orange slow flashing power LED) then half the time that it will continue when you press the power button - the other half of the power LED will switch to the green but the LCD display remains inactive & I switch the power button.

  Any help or advice would be welcome.

  Thanks in advance,
  Robin

  Hello

  This seems very odd.
  First of all: you can boot from USB only if the floppy drive is attached.
  You can boot from these devices USB-drive floppy/disk HARD/ODD/LAN.

  In my opinion the other unit starts the sound not as issues not a software problem.
  I think there could be something wrong with the hardware. But it is not easy to say what it could be exactly.
  You know, the look on the material is necessary.
  I recommend you contact Toshiba service partner in your country.
  They have much more experience in such cases. Guys can run tests and then can give you correct information about the failure.

• Satellite M70 - button of Intermittent gluing

  I have a Satellite M70-169 and the * button control * out of nowhere part starts to act as if it is pressed permanently, what happens at random and may persist even after you restart the laptop, it happens also during the HDD password screen * before starting windows * at all.

  Any ideas on how to solve this problem or what the problem would be welcome.

  Hello Christina

  It is not easy to say what the problem is here, but you can try to solve this problem if you do not use the buttons at all. I recommend you remove controls from Toshiba utility to add/remove programs. I hope this will help you.

  Please note that after that you do will not be able to use them by running OS. Please inquire about the results.

• ProBook 430 G2 - left trackpad button does not respond intermittently

  I have a brand new ProBook. G2 430 (SKU # G6W35EA #ABB) with Windows 8.1, completely up to date. I find that every 10-15 minutes, the left button on the trackpad becomes unresponsive. The trackpad still moving the mouse pointer and the right button will continue to operate, but the left button does not react. This takes several minutes, perhaps 3-4. Then the left button it will start again to work as if nothing had happened. Because the button back to work, I suspect it's more likely to be a problem with the driver software or the Windows 8.1.

  I have Synaptics TouchPad driver version 18.1.8.1, the current version of the driver.

  I have Windows 8.1 version 6.3.9600.

  I have the HP M74 Bios version 1.03 version (07/07/2014)

  Anyone have any ideas?

  I have a minor breakthrough! So, until now the best solution that we had found was close the lid and open it upwards and the button would start working again. Not very good when you are in the middle of something.

  The new workaround is to do a tap two fingers on the touchpad and that seems to work. I tried now on 3-4 laptops with 100% success!

  I don't know if it is a 'feature' that detects the Palm of your hand when you type or something. I have not found anything about this either on the driver (haven't looked very hard tbh).

• A button dialog box appears intermittently

  Has anyone encountered any instance where they ran of code that contains a call to a Dialog.vi button and didn't do not display dialog box?

  I write the code at present which is to launch a "Sample Communication Controller.lvclass" player. I tried to make calls for dialogue in instances overridden "Pre launch Init.vi" and "Core.vi actor". In both cases, whenever I run the actor often the dialog box does not appear. The code below illustrates my second attempt, when I tried to put the call on "Example of Communication Controller.lvclass:Actor Core.vi" (not done as an extract VI because the extract VI feature is buggy).

  

  I rolled my own logging system and use I think 'Example Communication controller begins!' is recorded systematically whenever the player is launched, if yes or no dialog box appears.

  Flat sequence structure is temporary and just an attempt to see if the data dependencies change has an effect.

  Just a long shot, but the dialog box button requires root loop. If something else is hogging the loop of the root, I could see what is happening, although I expect the code to hang.

  A simple test would be to replace the dialog box a button with a dialog of three buttons (see link for details).

• Split 13-r010dx: the button "On" works intermittently

  I have to press the button 'On' located at the top right of the screen on my HP Split several times until I get an answer. It will work eventually, but sometimes I have to press five or six times. It doesn't make a difference if I plugged in or on battery power.

  It SEEMS to work better when the screen is moved away from the keyboard, but maybe it's just a coincidence.

  I've owned the product for about 6 months.

  Thanks for any help you can offer!

  According to the message that you have recently published, I want to confirm that it could be a hardware problem and the power button needs to be replaced. I highly recommend you Contact HP immediately to Technical Support by phone to get help to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• Using the menu button to show/hide TOC CP7 intermittent

  Hello

  Forgot to mention using CP7, I would add also that it slides that do not work, when the Mneu button is clicked for the first time, shows the button pushed, but on the 2nd time, there is no action at all the...

  I have a problem when the menu with its knock adv to show/hide action button, does not always.

  I went through all the slides in masters and made sure that I have the same settings for each, but on some slides, it will display the table of contents but can't hide after pressing the button Menu again. This is assured, there is no associated transition with the key.

  It works well at every time whebn using the small line up double, but we need the user to use the button and do not rely on these arrows...

  Anyione elsoe had similar problem... ?

  See you soon
  Sabine

  Hi Rod,

  Thank you for that. They are actually custom buttons in our workplace, rather than a usual adobe PlayBar... However, what really strange is at the last minute, I thought copy button and then remove the original button and paste in the copy (don't ask not even why I thought this might work..) but it worked and all is good now...

  Thanks for responding...

  See you soon

  Sabine...