UBS does'nt detect camera

Similar Questions

• Lightroom CC does not detect camera

  Lightroom CC does not detect my D610 Nikon when I try to attach to it. My computer sees the camera. I updated the firmware and tried the basic as steps by pressing the shutter button, power off and or reboot the computer/device photo/lightroom. Any help is appreciated.

  We just released 6.4/2015.4 Lightroom which solves the problem of strap Nikon with Lightroom running on Mac OS 10.11.

  Please see Lightroom CC 2015.4 / 6.4 available

  Kind regards

  Mohit

• IdeaPad Y500 does not detect the camera

  Hello everyone!

  I had my Y500 for about 1.5 years and I can't use the camera more. The computer does not detect the camera and when I downloaded and installed the camera software the computer shows me "no approperiate driver to install! I tried to uninstall the camera driver and reinstall it again, but it's the same problem.

  I would appreciate a quick response

  The problem was with the camera and the camera cable. I sent my computer to
  Lenovo and they fixed.

• Lenovo Windows B590 8.1 tha camera works, but Skype does not detect

  Dear all,

  I'm new to the forum, where as a lurker I already found useful solutions in permeable opportunities. My technical knowledge, by the way, is very modest...

  It happens that my camera works fine on the laptop (a Lenovo B590 running Windows 8.1), allowing me to make videos, but when I installed Skype it does not detect the camera and asked me to 'connect to a camera'... so now I can't do videocalls using Skype.

  Before trying the remedy proposed in this post https://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/Lenovo-B590-Webcam-problem/m-p/1572836#... I wanted to ask if he could adapt to my situation or not.

  Concerning

  Tony

  Hi Cruver solid,

  This morning, I tried to run the software proposed in another post, one related to my question. He solved the problem: everything works fine now.

  Thanks to you and your colleagues

  Tony

• XP MOVIE MAKER DOES NOT DETECT NOT CAMERA

  I CAN'T DOWNLOAD VIDEOS FROM A CANON FS 200 CAMERA IN MOVIE MAKER. WHAT I GET IS A BOX SAYING THAT IT DOES NOT DETECT A DEVICE. HOW CAN I DO THIS

  No guarantee... but the following link might be worth the drive:

  Use. MOD with Windows Movie Maker files
  http://www.YouTube.com/watch?v=m31Ji4U5jWI&feature=related

  FWIW... you can download SDCopy from the following site:
  http://duckhouse.weebly.com/sdcopyexe-download-page.html
  (no installation required, just unzip the file and run it)
  by opening the folder and clicking on the left... sdcopy.exe)

  Another link that can be worth a visit:

  How to edit JVC. MOD files in a few easy steps
  http://www.YouTube.com/watch?v=ZY-cKaCEUJ4

  A search on YouTube can turn more useful tutorial videos.

  Good luck...

• AutoPlay does not detect intermittently digital cameras

  Original title: choice of AutoPlay box

  Before that my computer asked for a new hard drive, I could connect my cameras and a box automatically pop up would be for me to choose the program I want to download my photos. Now the box doesn't appear. I have a right-click on the camera in my computer, the properties selected, then events. Here, I can see an option "Question what program to run", but it is faded out and not available for selection. A device to stick on the same port of BSE shows the choice.

  Hi SamanthaAnn,

  1. don't you make changes before the show?

  We recommend that you run the Microsoft AutoPlay Repair Wizard to analyze your computer devices to find defective AutoPlay settings.
  See Autoplay Repair Wizard

  See also AutoPlay intermittently does not detect not removable digital cameras or media

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lightroom does not detect my camera... what should I do?

  Hello everyone so I'll try to attach my d810 with light Room 6... Lightroom does not detect my camera... what should I do?

  Hi delmonl

  What is your operating system?

  Please see Lightroom and El Capitan | Mac OS 10.11 for known issues if you use MAC OS X El captain

  Attach cameras Nikon and Leica using Lightroom CC 2015 and Lightroom 6 is not currently supported on El Capitan.

  Concerning

  ~Assani

• My mac does not detect my hard drive after the upgrade. How to solve this problem?

  My mac does not detect my hard drive after upgrading to Mac OS Sierra. How to solve this problem?

  Please provide more detailed information. You can read write an effective communities of Apple support question. Maybe you could open disk utility and take a screen snap so that we can see what you see.

  To post a screenshot

  1. Press command + shift + 4, that will change the cursor to the line of sight.
  2. Hold down the mouse button and the collimator allows you to select the part of the screen you want to capture.
  3. Release the mouse button and the image will be saved on your desktop.
  4. Click on the camera icon in the toolbar of the message forum Editor.
  5. Drag the image on the button select a file and click the Insert button.

• Does not detect the hdmi cable more (very specific scenario)

  Well then...

  Got a monitor 15-HD to hdmi cable and a mac laptop (13 in the retina).

  So when I got all that I put it all together and it worked. I left because there a little bit, everything is plugged in and did not return for some time, so my mac fell asleep at the time wherever I went. Disconnected everything to relax on the couch. I went back and all plugged together again except that now the mac does not detect the cable. Tried a bunch of things with it. Restart, unplug the unit, detection manually, etc...

  Since the monitor is used and recently purchased cable, I thought time to them to test first. Got a laptop PC and plugged into the cable. The monitor and cable worked.

  Tried to connect my mac to the TV with my ps4′s hdmi since I did that a lot before. Also works.

  The problem is literally the combination between the cable and the mac. Which is a problem since I got the reason was to serve as my mac.

  During my research, I saw that specifically leaving the connected hdmi where sleeps your laptop can spoil it supposed to be... I saw it one time so idk if it's true, but it happened to me... and no, it wasn't really a solution when I came across that. Tried Googling this specific problem, but did not meet anything since my problem seems so specific.

  Fast forward to the next day and tried again now that both had little respite between them. Plugged into the HDMI and my laptop starts fading and return to a black screen. The screen would go black usually and so the laptop screen and the monitor would appear once again. sauf_que this time that there not, he just kept it and the monitor has not changed (Yes) it's). Not wanting to let him do that too long I unplugged and tried a different port with an adapter, I have also, since I did 3 holes I could use this for might as well try them all again. But unfortunately, I don't have it trigger anything again. So I went through another round of troubleshooting to try to make it work, but here I am, trying to see if anyone else has had this problem and solved. I am back to wait another day I guess and just hope. If not idk what to do, except maybe to get another cable? I don't know if this would solve it well.

  Hello Kaida W,.

  Thank you for reaching out to the Apple of community support. I'll do everything I can to help you get your monitor works as expected. Our first step would be to restore your System Management Controller (SMC) that allows to manage systems of different material on your Mac. This article will guide you through reset:

  Reset the management system (SCM) controller on your Mac.

  Try it and tell us how it goes. The entire community is here to help.

  Best regards-

• HF R600. For some reason, my computer does not detect it.

  So, I don't know why, but my computer, windows 8 (I know..) does not detect my camera, the HF R600. It does not appear in the list of connected devices, the transfer utility said that it is not connected, I'm not sure what to do. Also, I felt that I could ask now as well. IM planning to use with LiteCam game software with the camera providing the embedded video, you get to know if a compatible device for it?

  Try this, with connected usb camera, click the play button under the power button on the camera body?

• 15 - n010TX: my HP Pavilion does not detect the integrated webcam

  Mr President.

  I have an integrated webcam which worked perfectly until recently. My laptop came with Windows 8 in 2013, and I upgraded to 8.1 Windows. However, now my computer is not able to detect the integrated webcam. I know that it's a software problem, because the material could not have been damaged.

  I tried to install software youCam"with the help of the HP Recovery Manager, and it was installed successfully. However, when I open YouCam, it does, "no available camera detected. Please check if the camera is connected and try again. Even Device Manager has no other choice "imaging devices". I guess that something disabled the webcam, and for some reason, no driver is able to turn it back on

  I need to get this camera working. My product name/number is 15-n010TX. Please let me know what I can do...

  Thank you

  Try a hard reset as follows:

  (1) remove the battery and unplug the DC power adapter.
  (2) press and hold the power button for more than 15 seconds.
  (3) plug the DC power adapter (leave the battery for now)
  4) press the power button

  Please post here your positives or negatives in your thread.

  Customer self repair library

  http://h20464.www2.HP.com/index.html

• I7 X 220 does not detect MyDigitalSSD SandForce based msata

  I have a map of msata mydigitalssd that I just got and it is not detected in my laptop.  It's the smart series 256Go with sandforce controller.  the laptop is the model 4286cto with the i7 CPU and usb 3.0.  I worked with mydigitaldiscount and continues to work with them, but until I want to see if anyone else has had a similar problem or has any ideas.  I got so far with good interactions with them and their support.

  I updated and downgraded firmware of different times, 1.31 to 1.19 and I am currently on 1.28.  I did it because I know the X 220 with the i7 used to have problems with msata which has been fixed in bios 1.18.   the msata card has 2 led to this topic, both light up momentarily at the start, then one of them remains solid on blue after that.  The bios does not detect anything for this device.  If I'm going to start diagnosis screen it does not detect it, if I hit f12 for the Boot Manager I do not see the msata ssd.  If I go into windows Device Manager I don't see the ssd.  If I do an lspci under linux, that I do not see the ssd, if I do a fdisk - l, I see, not more than I see in the dmesg.

  MyDigitalDiscount was large and cross shipped a replacement for me right now, they got my old back and tested and said: it worked fine, a new shows exactly the same problem and they tested before shipment.

  I'm at the end of my rope here.  I'm thinking the ssd is not compatible with the laptop (port of the bios/msata), I have a slot msata hard or I'm half delayed and missing something completely obvious.

  I took a wwan card and plugged into the laptop of my worklaptop and it detected it and came as being on the black list (which is good that at least he detected something).  I know that's not final, mpcie work does not necessarily mean an msata work, but I think it's a good sign.

  I do it for a long time and I like to think I'm pretty good in this, however I've never used a map before msata and admit that I could be missing something, I don't know what.

  UPDATE: solved!

  She was a bad mother.  The msata ssd works perfectly now that I got the replaced planar.

• Card reader HP Pavilion dv6 does not detect some SDHC cards

  Hp Pavilion dv6-6104so laptop

  Windows 7-64 bit

  The laptop card reader does not detect some of our SDHC cards. We have updated the driver to the latest version, Realtek PCIE 6.1.7601.90 and BIOS, but it does not yet recognize some of our cards.

  We have six three SanDisk SDHC cards (4, 32 and 32 GB), two Kingston (8 and 8 GB) and an integral (4 GB). The card reader recognizes four of them (4 to 32 GB SanDisk cards and one of the two cards Kingston). What is strange and you may have already noticed is that the card reader recognizes only one of two cards with the same brand and quality!

  On the two cards that don't recognize in our specifications, they work properly in their corresponding cameras and are detected without problem by another reader of cards to laptop of HP Pavilion dv6-3138so, as well as by two netbooks from our two different brands.

  When we connect the camera (a Canon and Sony, both point) to the computer via a cable USB 2.0, the laptop detects the cameras and through them, we can access the cards.

  We bought the laptop less than two weeks in Helsinki, Finland.

  Thank you in advance for your help!

  Hey everybody,

  Use of a high capacity card in a standard card reader location causes this problem. Im going to guess that the cards you ar having problems with are not standard SD cards and SDHC cards. As Naoto said, using a camera as a card reader you workaround this. You can also look in the adapters of SDHC card reader. Here is a good article on SDHC cards: http://goo.gl/lj5Fq

  I hope this helps!
  Sean

• Lightroom does not detect my D800 when trying to attach via attached USB cable

  Please can someone help with this problem, lightroom does not detect my Nikon D800 via attached USB cable, I use my IMac and OS x El Capitan 10.11.1 version

  Kevg salvation,

  Attach with Nikon cameras are currently not supported on Mac 10.11.1

  Reference: https://helpx.adobe.com/lightroom/kb/lightroom-and-el-capitan---mac-os-10-11.html

  Concerning

  Sarika

• does not detect external hard disk

  Hey guys

  Recently I update my macbook pro (2014) in the sierra of mac os. Since then, my mac does not detect any external hard drive I plug in it even if these drives are detected by the PC and all the files inside. I tried to open utility disk where the hard drive is displayed but the 'volume' located below is gray. When I try to hit mount said volume that nothing happens. All I could do to fix this?

  Thank you in advance.

  Hi sgerolio,

  I understand that you are unable to detect any external drive that you plug into your MacBook Pro, since you upgraded to macOS Sierra.  How many external hard drives work?  How they are formatted?   If formatted for PC, they would not necessarily be able to be read by a Mac.

  You have a small empty external drive or USB key that you can test?  Formatted in Mac OS extended (journaled).  Using the Finder, you are able to see the external drive and drag a file to it?

  The title of the article includes the Aperture application but apply these tips to format an external hard drive to any software application.

  Drives external format Mac OS extended before using with opening

  Take care.