Ubuntu is not able to detect Bluetooth (with A2DP) v2.0

Similar Questions

• Satellite A60: SD-R6112 drive firmware is not able to detect most of the discs

  My Toshiba Satellite A60 was an engraver of DVD SD-R6112 with Firmware = 1530 is not able to detect most of the discs. I mean that it is not able to detect most of the records he used to read or run however it works the CD provided with laptops for example installation and tools and Utilities CD.

  Recently, I updated win xp to SP2 and I think that this problem is arised for this reason (but not sure)... I tried to reinstall the driver and also tried the latest firmware upgrade, but it is said that it does not require.

  Everyone can you please suggest me the solution. I really tried all but it does not work.

  Hello

  The fact is that each player doesn t work with all THE CDs or DVDs.
  Sometimes, the most recent firmware update could solve these problems, but you will not get a 100% guarantee that it will work.
  I have tested many media and now I decided to use the TDKs CD and DVD.
  I m happy because now I have problems with this media.

  The only solution is to test the media.

• Drive hard WD Passport not able to detect Windows 7, only the PC restart can work

  Hello:

  I have 500 G WD Passport hard drive. My laptop Dell Win7 64-bit not able to detect it. It does not appear in Device Manager, and disk management. When I show the hidden device, I can see the driver properly installed passport but windows says no device detected. The work around I have to plug my passport for PC and then restart my PC every time. I have no problem with an other laptop Win7, but I don't remember now if it is a machine 32 or 64 bit. Can anyone help?

  Thank you.

  Lin Chin

  Hi MightyMiro_WD:

  Just to say the good news before the explanations below. Your method worked partially. :-)

  I followed your instructions as below:

  1. I go to control panel-> device-> Universal Serial Bus controllers Manager and uncheck the "allow this computer to turn off this device' for everything USB with this option: Hub USB root, Generic USB Hub, USB Hub 2.0 MTT and etc.

  2 insert the disc WD Passport to my PC. PC cannot detect. Then I insert USB so that my WD Passport always connected. The PC is able to detect the key USB and WD Passport.

  3 eject my USB. My WD Passport must always be able to be detected by the PC, even I Plug and unplug several times.

  4 remove my WD Passport and connect to another USB port. PC cannot detect. Insert my USB then my WD Passport always connected. The PC is able to detect the key USB and WD Passport.

  5 eject my USB. My WD Passport must always be able to be detected by the PC, even I Plug and unplug several times.

  6 now I plug/unplug my WD Passport to one of the 2 USB ports without my USB connected.

  I then in Power Options in Control Panel to change "USB selective suspend settings" to "disabled". The "turn off hard disk after" has already been fixed forever. Made the start of the procedure from step 2. And behavior are the same from step 2 to step 6.

  I restarted my PC, just in case the changes I did for Device Manager settings to take effect. BLUE SCREEN came out so that the closing of my PC. Do not remember the exact error message. After you restart, done at the beginning of the procedure from step 2. And behavior are the same from step 2 to step 6.

  Then I restored the changes to 'allow this computer to turn off this device' for all USB items except USB root hub. Just to see if a single USB root hub has been changed, it gives the same result. I also restored the "settings USB selective suspend" "Enabled". I restarted the PC after that. BLUE SCREEN again. Do not remember the exact error message. After you restart, done at the beginning of the procedure from step 2. And behavior are the same from step 2 to step 6.

  At this point, I wasn't looking to cancel all changes back to the original and do like to see if it still works as it is.

  Conclusion, your method worked partially. I don't know why the WD Passport cannot trigger the PC to recognize by itself for the first time after restarting the PC. It needs USB key to accompany. But I'm happy now. At least I do not need to restart my PC now. :-)

  Thank you.

  Kind regards

  Lin Chin

• EOS - 6 d: iPhone 6 s not able to detect the wifi of 6 d

  I recently changed my phone from 6 6 s 6 s iPhone iPhone iPhone was not able to detect the wifi of the camera. My mini iPad 2 was able to detect the wifi of the camera. This is a known issue and a solution for this? Thank you in advance.

  Communitty one Apple provides some tips. It turns out that I just needed to restart my phone to iPhone detect the camera wifi signal. Thanks to everyone who helped me.

• I get the message when you set up a new user "a temporary user profile is loaded because Windows was not able to connect you with your local profile."

  Dear all,

  I have a Windows PC in my office. Because of some configuration issue, I deleted the domain user and tried to connect to the system with the same user credentials. It identify you with the credentials of the user, but I get a message saying: "a temporary user profile is loaded because Windows was not able to connect you with your local profile."
  This system is joined to the domain and the profile is an Active Directory user.
  Here are the details of the event ID:

  Details Product: Windows operating system Event ID: 1515 Source: Userenv Version: 5.2 Symbolic name: EVENT_PROFILE_DIR_BACKEDUP Message: Windows has backed up this user's profile. Windows will automatically try to use the saved profile the next time the user connects. Explanation A temporary user profile is loaded because Windows was unable to connect with your local profile. A possible cause of this is if your local profile has been corrupted or that you no longer have the correct privileges for profile records. Note: Any changes made to the temporary profile is lost once you disconnect. User action Search the profiles additional events in the event log for more information on the reason why this happened or contact the system administrator for further assistance.

  There is currently no article for this specific error Microsoft Knowledge Base or an event message. For more information on other technical support options, you can use to find answers online, see http://support.microsoft.com/default.aspx.

  Please, help me to create the same user profile in the system with formatting system.

  Hello

  I suggest you to refer to this link and check if it helps:

  http://support.Microsoft.com/kb/947215

  It will be useful.

• Cannot run programs or restore Windows - error not able to detect options or environment variables

  original title: HELP!

  My netbook has changed, windows is no longer genuine, I can't run the tasks, restoring, recovering, absolutely nothing, not even download any help whatsoever.  I need help, I don't know if I was in charge by another entity, a virus or what, but I was totally disabled.  I can always get on line and access basic information about my computer.  An error message that comes up often is "not being able to detect options or environment variables.  In my view, that it is a virus that has locked all forms of assistance and recovery.   What can I do?   Help

  also I can't turn on my firewall and my current antivirus says that everything is ok.  It is not the case.  This problem started when a website popped up and said that I had been infected that I have to pay and download their program to save my computer.  This program would go not far, my current antivirus, locking and it kept popping up again and again until finally I ended up with a green background and disabled the system.

  This problem started when a website popped up and said that I had been infected that I have to pay and download their program to save my computer.

  
  
  It seems you have been affected and have installed malware now. It is a common program of scareware designed to trick you out if your money
  I suggest that you get better results here:
  http://answers.Microsoft.com/en-us/protect

• "Data binding will be not able to detect the transfer..." "while [bindable] is set.

  Hello world

  Thank you for taking some time to try to help me.

  I get the warning "data binding will not be able to detect the assignment... "for a

  Collection ArrayCollection all [bindable] properties are set correctly - at least I think... ;-)

  [bindable]
  private var allParties:ArrayCollection = new ArrayCollection();
  

  and then, later:

                 <s:DropDownList id="dropDownList_party_sprecher1"
                                                          [...]
                                     labelField="_internal_partyname">
                      <s:AsyncListView list="{allParties}"/>
                 </s:DropDownList>
  

  The elements of the array collections are a custom class to the mine, which has been automatically

  generated by the php flash builder Gizmo service. This class is also marked as [bindable]:

  [Bindable]
  public class Parties extends _Super_Parties
  {
       [...]
  }
  

  and the extended with class

  [Managed]
  [ExcludeClass]
  public class _Super_Parties extends flash.events.EventDispatcher implements com.adobe.fiber.valueobjects.IValueObject
  {
  [...]
  
       [Bindable(event="propertyChange")] 
      public function get idx() : int    
      {
              return _internal_idx;
      }    
       [Bindable(event="propertyChange")]
      public function get partyname() : String    
      {
              return _internal_partyname;
      }  
  [...]
  }
  
  As I understand it, the [Managed] makes the whole class 
  [bindable] as well and the getters are marked too.
  I've put the [bindable] keyword anywhere I could imagine 
  but it doesn't help at all.
  In principle I wouldn't mind the warning, but the 
  dropdown-list doesn't work.
  
  Please let me know if you need any more information,
  
  Thanks
  
  
  
  

  Try not to allParties

• I am using windows 7 home that Basic I have updated windows, I'm not able to use bluetooth

  Hi I was using windows 7 home basic in my laptop, but a few days back I've updated windows, from this moment I am not ablt to use bluetooth. How to do ok. I am not able to trouble shoot problems too.

  See:

  Solve problems Devices Bluetooth in Windows 7

• Not able to download files with the iPhone from the outside

  Hello

  I'm not able to download files from my iPhone when the iPhone connects to the workspace to external. We have deployed nginx as reverse proxy in our DMZ which transmits requests internally will bridge.

  The download start (number of bytes transferred to the top), then the transfer ends with "error".

  I could not find errors in the log files, but maybe I didn't look in the right places

  If the iPhone is connected to the internal workspace, the problem does not occur

  Any ideas on this subject?

  Thank you

  What is the waiting period that you define in the nginx Server in the DMZ? All other additional configurations?

• BlackBerry smartphones can not connect my handsfree Bluetooth with my 8310

  I have a problem, my Bluetooth Handsfree cannot connect with my curve 8310, but my 8310 curve can connect with my other camera, also able to connect with my other camera Bluetooth hands-free kit. I'm a new user for blackberry, can someone help me? Thank you

  You know probably already, but just in case: the hands-free bluetooth devices have a 'discovery' mode that makes your phone scan for it. Consult the manual for the hands-free kit see how to market. On mine, I have to hold the power button for a bit, until the device flashes blue and Red (it will be different for your, but you get the idea). You can then analyze to devices on your BB and it should detect it. It will then ask if you want to connect to this-> say Yes. He will also ask for a password (usually ' 0000') and allows you to pair upward with the hands-free kit.

• CD/DVD drivers are missing and my system is not able to detect the dvd drive.

  Hi, after installing some updates my dvd/cd drive is not detected by the system and the option is not in my computer menu, so I checked in the Device Manager. and my cd/dvd drivers are completely absent and not present in the Device Manager. I m using vista Home premium, help someone
  Thank you

  Hello

  1st reboot and watch again in Device Manager:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• ODI is not able to detect the primary/foreign keys to XML - the user has no privilege or object not found

  Hi guys,.

  Im trying to load an XML with the address of two entities and employee as below. The topology of reverse engineering, everything works well. Even able to display the xml data in ODI, but when I try to load the data of these two entities join by the schema of the primary keys and foreign keys which created odi engineering process reverses for xml, im im getting the error below.  IM able to load an entity data, error occurs only when I use the join odi creates internally to identify employees for xml and address components

  XML file:

  <? XML version = "1.0" encoding = "UTF-8"? >

  < EMP >

  < Empsch >

  < employee >

  < EmployeeID 12345 > < / EmployeeID >

  < original > t < / initials >

  John < name > < / LastName >

  DOE < FirstName > < / name >

  < / employee >

  < address >

  < > 12345 as WorkPhone < / as WorkPhone >

  < WorkAddress > test 234 < / WorkAddress >

  < / address >

  < / Empsch >

  < / EMP >

  Topology: jdbc:snps:xml?f=C:/Temp/RR/Empsch.xml & s = Empsch & re = EMP & dod = true & nobu = false

  Error message:

  -5501: 42501: java.sql.SQLException: user has no privilege or object not found: EMPSCH. EMPSCHPK

  java.sql.SQLException: user has no privilege or object not found: EMPSCH. EMPSCHPK

  at org.hsqldb.jdbc.Util.sqlException (unknown Source)

  for org.hsqldb.jdbc.JDBCPreparedStatement. < init >(Unknown Source)

  at org.hsqldb.jdbc.JDBCConnection.prepareStatement (unknown Source)

  at com.sunopsis.jdbc.driver.xml.SnpsXmlConnection.prepareStatement(SnpsXmlConnection.java:1232)

  at sun.reflect.GeneratedMethodAccessor65.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  to oracle.odi.core.datasource.dwgobject.support.OnConnectOnDisconnectDataSourceAdapter$ OnDisconnectCommandExecutionHandler.invoke (OnConnectOnDisconnectDataSourceAdapter.java:200)

  to $Proxy2.prepareStatement (Unknown Source)

  at oracle.odi.runtime.agent.execution.sql.SQLCommand.doInitializeStatement(SQLCommand.java:83)

  at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:117)

  at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:111)

  at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:81)

  at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:1)

  at oracle.odi.runtime.agent.execution.DataMovementTaskExecutionHandler.handleTask(DataMovementTaskExecutionHandler.java:70)

  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)

  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)

  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)

  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)

  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:366)

  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)

  at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:292)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:855)

  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)

  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)

  at java.lang.Thread.run(Thread.java:662)

  Caused by: org.hsqldb.HsqlException: the user has no privilege or object not found: EMPSCH. EMPSCHPK

  at org.hsqldb.error.Error.error (unknown Source)

  at org.hsqldb.ExpressionColumn.checkColumnsResolved (unknown Source)

  at org.hsqldb.QueryExpression.resolve (unknown Source)

  at org.hsqldb.ParserDQL.compileCursorSpecification (unknown Source)

  at org.hsqldb.ParserCommand.compilePart (unknown Source)

  at org.hsqldb.ParserCommand.compileStatement (unknown Source)

  at org.hsqldb.Session.compileStatement (unknown Source)

  at org.hsqldb.StatementManager.compile (unknown Source)

  at org.hsqldb.Session.execute (unknown Source)

  ... more than 27

  Please advice

  Thank you

  Fabien

  It is clear from the content of the xml file, you have given here. In this xml file, you have four type of complex. Two of them are employed and address. However the employee doesnot has nothing to do with the address that you have not added the relationship. That is why its failure. This isn't the fault of the ODI.

  Also I suggest not to use self-generated by ODI dtd that you might face problem in the future. For example, the address of XML type has 8 attributes, and 4 of them are not mandatory. This means that each of your xml file may have attributes between 4 and 8.  That's where ODI auto generated DTD fails.

  ComplexType element XML schema

  Thank you

  Chantal

• I had to do a complete reinstall of windows 7. I am not able to detect an external monitor

  It just doesn't appear in the monitor Panel. I clicked on "detect", but it does nothing. It seems that there are several small installation pieces missing. Perhaps there is a driver for the detection of external monitors? I connected it HDMI cable and HDMI screen. I don't know what else to try. More information at random which may or may not apply: although I tried to set the resolution of the screen, my screen is not just look right at me... things are not the size I'm used to etc.

  Hello

  A.

  Download and install the latest chipset driver Intel here.

  Restart the system.

  B.

  Uninstall the Intel graphics driver.

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  Useful resources:

  How to determine whether a computer is running a 32-bit version or the 64 bit version of the Windows operating system

  Download and install the latest graphics driver Intel HP from here if you are using the 32-bit system.

  Download and install the latest graphics driver Intel HP from here if you are using the 64-bit system.

  Restart the system and check the result.

  Edit:

  I joined this thread at the request of the user.

• Not able to detect the wifi on my laptop

  I have a Dell inspiron 1525. Recently I got Hp deskjet all-in-one 2545 wireless printer. The printer beeps wifi that I could connect at once. But the next time I tried it does not work. The printer is emitting the wi - fi signal but my laptop doesn't detect any wireless network. Please find a solution to my problem.

  I don't have any other wireless networks, other than the printer.

  How you connect this laptop to the Internet when you're at home?

  Print a Network Setup page and a page of network test by pressing the wireless button and Start copy Black button at the same time (see page 6 of the user's Guide).  Please have the following information on these pages:

  IP address

  Default gateway

  The network name

  Network status

  Networks detected

  On the laptop, open a command prompt window by typing cmd.exe in the search box and press ENTER.  In the black command prompt window, type the following command, and press ENTER after each line

  ipconfig/all > "% userprofile%\Desktop\ipinfo.txt".

  Notepad '% userprofile%\Desktop\ipinfo.txt '.

  output

  Select all the text in the opened window of Notepad (CTRL + A) and copy (CTRL + C).  Then click on in your response here and paste (CTRL + V) the information.  You can close the Notepad window and remove ipinfo.txt from your desktop when completed.

  Go to devices and printers

  Click on any icon in the section 'printers and faxes '.

  Click on the "Print server properties" button in the toolbar at the top of the window

  

  Click the "Ports" tab

  List of all the ports indicated other than LPT and COM ports  You may need to expand the "Ports" column by clicking and dragging the line between the 'Ports' and 'Description' to see the full port names

  For any port, names that resemble an IP (e.g. 192.168.1.100, 169.254.0.1), include the "Description" and "Printer" and the name of the Port.

  

• Cisco TP Codec C20 is not able to speak CEC with LG LCD screens

  I was waiting for the CEC on / stand by the possibilities of the software TC4.2.1 for awhile only discover that it does not work with LG CEC (aka SimpLink), but on the other hand, it works very well with the Sony BRAVIA Sync.

  Has anyone encountered this same problem?

  Hello Mihail,

  We also tested with LG SimpLink and seller sends specific commands and will not respond to requests for confirmation.  This limitation will be added the release notes.

  Thank you!

  Paula