UCS Manager of port feeder error

Similar Questions

• Question of the UCS Manager

  Hello

  I have problem with manager Cisco UCS, after have logged you in the UCS Manager, I get an error.

  Print.PNG

  

  Cristobal,

  It certainly is a cause of what UCSM bug doesn't do what it is supposed to and the only bug which is really (according to the version you are using) is https://tools.cisco.com/bugsearch/bug/CSCum95854/?reffering_site=dumpcr and seems to be fixed in the latest versions...  2.2.2c; 2.2.3A; 2.5.1a; 3.0.2c (UCS Mini)

  Advice is to contact TAC for assistance (if necessary).

  -Kenny

• Error UCS Manager Console KVM to open after Java Update

  After the upgrade to version 1.7_21 Java I tried to access the KVM console from within the UCS Manager (v2.1 (1 d)) and get the error message:

  "Cannot run the program"C:\\Program": CreateProcess = 2 error, the system cannot find the file specified."

  I tried to remove installed applications and applets as well as temporary files from the Java console inside, but it does not solve the problem. We also tried to launch the console KVM in KVM Manager and that works very well. Everything works correctly when you run Java 1.7_17.

  Everyone knows about this problem since upgrade to 1.7_21?

  Thank you.

  In the meantime, you can install Java in a directory path that has no space to work around the problem. For example: c:\Java\jre7

  This will give you access KVM again.

• Fault clearing UCS Manager on linking rising unused C-series adapter

  I have a number of C240M3 servers in an infrastructure of the UCS.  They have all two adapters VIC 1225 and when they were connected to the start, technicians accidentally connected the second card on some of them to the aircraft.  For now at least, we want to only first used adapters (two ports - one for each FEX).  However, as map 2 was connected at a given time, UCS Manager will not stop giving these flaws:

  F0206 - adapter 5/2 is inaccessible

  F0209 - link interface rising adapter 5/2/1 the link status: unavailable

  There is not a way to erase the mistakes without this second reconnecting.  Re-recognition of the server has not helped and I'm not sure I want to try their decommissioning and then get them to appear in the UCS.

  Does anyone know how to clear these faults manually?

  Open a TAC case and get TAC watch mistakes, then we can try to delete them, if they are real error messages.

  -Kenny

• UCS Manager & Vmware

  Hi guys,.

  Before we set our Cisco UCS solution in we have Vmware running with Nexus 1000v switch. After the installation of the Cisco UCS solution, we migrated a lot off the coast of the old system to the new. By reading the manual on setting up vCenter, Port and VMS profiles in UCS Manager, it seems that this creates a new on the nexus 1000v vsm. Anyway is to import what we have so that we see in the UCS Manager?

  David, the functionality of the UCS you speak is known as VN-Link in the material while the Nexus 1000v is known as VN-link in the software. Installation and configuration is very similar to the Nexus 1000v but they are separated distributed virtual switches.

  Unfortunately, you can't use both because they require the VEM loaded on ESX hosts and the UCS VN-link requires a login policy dynamic UCS vNIC. If you use the 1000v, you will not be able to use the VM tab in UCSM and you will not see anything on the virtual computers tab on a Service profile.

  In my opinion the Nexus 1000v is preferable because is offer more features, more scalable and is managed/set NX - OS. Of the UCS VN-link option also limits the number of virtual machines, you can run on a host computer, because the dynamic vNIC takes in charge a maximum of 56 depending on how rising your chassis to your FIs. If you have only 2 uplinks of your chassis then the max machines virtual host when using the UCS VN-Link is 20-24, according to the number of vNIC ESX host, you create as part of your Service profile.

• Integration of UCS with vSphere - invalid URI error

  Hello

  I fight to integrate the Manager UCS with vSphere vCenter.

  The extension of vCenter is exported from the UCSM without error, but when you try to install the plugin via vCenter plug-in Manager I get this error:

  "Invalid URI: the URI is empty.

  I found this on the web, but this brings me any more to solve the problem:

  http://terenceluk.blogspot.com/2010/11/error-message-when-clicking-on-download.html

  Any tips?

  Kind regards
  Radek

  Hi Radek,

  So as long as the file is saved in the folder plugins in vCenter, and they appear in the list of plugins, then that's all you need to do. You don't need to click on the 'Download and install' button as this will not work, because you have met. This is because it is a document XML allows to activate and validate your vCenter server and communication between UCS/Nexus 1000v. There is no practical application which is executed and must be installed.

  Hope that helps to clarify

  Thank you

  Michael

• UCS management interface - B series

  Management of the UCS of series B can then passage to uplink ports / Server interconnection fabric and not on the Management Interface of the FI? As in the C series there is a choice in the MMIC where management requires ports LAN (LOM)

  Yes, since IF you have a connection of the mgmt0 port - is for the FI management and KVM blade, etc. (e.g. the OOB management).

  On the IF configure you uplink profits that are used to carry network traffic on the blades.

  On the C series if you configure the port MMIC to be mode shared-LOM then yes all traffic management and the path of data will be done by the same ports LOM. If you choose the dediacted port then you must use the MMIC port on the C series for the management and LOM for the data.

  . / Afonso

• XenServer on UCS Manager 2.1

  Hello

  According to the compatibility matrix, XenServer is not supported on the blades of the UCS in UCS Manager 2.1...

  I wonder if that is a documentation error, or simply true...

  In case this is the last... How is that possible?

  Thank you

  He has not qualified yet, but it should be in the near future.

  Robert

• The UCS Manager LDAP question

  Hi guys,.

  I was wondering if anyone could help with a weird problem that we seem to have met with our UCS Manager.  We set it up to use LDAP authentication for log on which works very well for four of the five members of the team, but we have a user that although it is in exactly the same groups as the rest of us continually gets unautheticated errors to the user.

  We did the habit of checking that it is not his machine or installation and in the newspapers that it even does not save an attempt to log on default so not sure what I can check any thoughts would be much appreciated!

  We use UCSM v2.1 (1e) in case it's relevant?

  Thank you very much

  John

  I ran into the same issue.  Has proved to be a bug in the firmware DN was too long.

  CSCth96721

  It is more a limitation of 128 characters for the number of units of organization or the length of the distinguished name (DN) when you use LDAP to Active Directory authentication.

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/release/notes/UCS_28313.html

• Cisco UCS Manager does not discover C240 Server

  Hello, Cisco community!

  Currenlty UCS manager shows two interconnections of fabric and two extensions of fabric, but for some reason, my server isn't appear

  Birds seen are:

  I have my C240 connected with two 10GbE twinax cables, each going to a fabric Extender. (Total FEX 2)

  I have two 10GbE twinax cables connected each interconnections FEX fiber modulus in each tissue. (Total of 2 FI)

  The fabric interconnect ports L1 and L2 are connected to their corresponding ports. If their connected to each other.

  I run 'show cluster extended State' on the primary FI and this is what I get:

  FI - A # show cluster extended State

  The ID of the cluster: 0xebaad0e28ded11e3-0x86d4002a6a153d84

  Start time: Thu Feb 5 16:07:44 2014

  Last election period: Thu Feb 5 16:23:26 2014

  A: UPWARD ELEMENTARY SCHOOL

  B: UP, SUBORDINATE

  A: Member State UP, lead, State State PRIMARY, mgmt services: UP

  B: Member State UP, lead SUBORDINATES, mgmt services state: to the TOP

  State of PRIMARY_OK heartbeat

  INTERNAL NETWORK INTERFACES:

  eth1, up to

  eth2, up to

  HA IS NOT READY

  Any device attached to this fabric of interconnection

  After you set up server-side on each FI ports, the server still does not appear

  Any ideas are highly appreciated!

  -Alex

  Hi Miguel

  It seems to me, you're running a rather old version of UCS.

  In my screenshot you see the pool ext - mgt KVM on the LAN tab

  In an older version (I think< 2.1),="" this="" was="" under="" the="" admin="" tab.="" please="" have="" a="">

• UCS Manager - internal backup system failed [WSF: FAILURE]

  Hello

  I have UCS Manager Version 2.2 (1 c)

  I implemented the backup of the configuration via SCP and Im getting error.

  Destination is accessible from other computers in the same VLAN via WinSCP.

  I need help what exactly is causing that error in the UCS Manager and how to solve this problem.

  I tried to delete and add new functioning of the backup operation.

  Severity: critical
  [FWS: FAILURE]: internal system backup
  Type: WSF
  Cause: WSF-failed
  Code: F999723

  I'm waiting to activate fast playback.

  See you soon.

  Looking at the logs you posted there is an inconsistency in the algorithms between scp server and the ucs system. Server accepts the aes - ctr and ucs uses aes - cbc?
  Maybe try adding

  "The cipher aes128-ctr, aes192-ctr, aes256-ctr, aes128-cbc" to/etc/ssh/sshd_conf

• Catalogue of ability in Cisco UCS Manager 2.2(1b)

  Client is running UCS manager 2.2(1b), new leaves, we installed in the existing chassis, we get RAM warning as "f0502" improve us the catalog for 2.2(1b) and active catalog. The error still exist. Please advice on this error.

  Upgrading the catalog must be 2.2(1b), or we can improve the catalog to the latest 3.0 version.

  It depends on which the blade that you have loaded now and the memory module that is in the new blade. See section catalogue of ability to http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes... for modules of memory included in the current version running. If it is included in any catalogue of higher capacity version, you can switch to any catalog version 2.2 (x) and it should be good.

• When I try to open the Task Manager, I got an error message that says that it has been disabled by the administrator. How to enable Task Manager?

  original title: whenever I try to open the Task Manager, I get an error message that says that it has been disabled by the administrator.  But I never turned it off.  How to enable Task Manager?

  How to enable Task Manager?

  Try the solution in one of these KB articles:

  "Task manager has been disabled by your administrator error.
    <>http://support.Microsoft.com/kb/555546 >
    <>http://support.Microsoft.com/kb/555480 >

  HTH,
  JW

• WAN port mini error 31

  WAN port mini error 31

  Hi Cooljoe613,

  I would like to gather more information about the issue.

  ؠ What edition of vista are you helping?

  ؠ Is your computer connected to a domain or a workgroup?

  ؠ How do you get this error?

  ؠ you make changes to the computer?

  If your computer is on a domain please visit the link http://social.technet.microsoft.com/Forums/en-US/category/windowsvistaitpro

  Thank you and best regards,

  Bindu S - MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Integrating Active Directory and UCS Manager

  I'm looking to create an LDAP authentication provider in the UCS Manager that will authenticate users in Active Directory. I see the configuration guide UCS that a schema change is required to add a new attribute for user accounts and the guide details what the new attribute should be. However there are no detailed instructions on how to make the change to AD. I imagine some sort of import LDIFDE is required, but does anyone have more detailed steps on how to do it?

  Thank you

  You can ssh in your UCS, go to the NxOS prompt and test authentication as follows:

  Laurel - A (nxos) # test cpaggen aaa cisco group ldap
  the user has been authenticated
  Laurel - A (nxos) # test aaa group ldap cpaggen cisco1
  user authentication failed
  Laurel - A (nxos) # test aaa group ldap foo doesntexist
  user authentication failed
  Laurel-a. (nxos) #

  Make sure that this part of work. The role assignment comes from CiscoAVPair and the value must be a shell: roles = 'admin' If you want the user to be an administrator. CiscoAVPair must be an attribute of the user object. I've attached a screenshot of Wireshark for a successful authentication and authorization.

  You will also find the definition of the user and configuration of my UCS.